Affiner votre recherche
Résultats 1-10 de 13
Facile fabrication of crumpled graphene oxide nanosheets and its Platinum nanohybrids for high efficient catalytic activity
2018
Chen, Xiaoxiao | Chen, Baoliang
Crumpled graphene oxide nanosheets have drawn large attentions due to its compressibility and self-avoiding stacking as flat graphene sheets trend to aggregate and restack. Up to now, most of the synthesis approaches were relied on external substrates, such as elastic substrates or ultrasonic atomizer, and the crumpled structures were obtained in a solid state directly. Here we report a facile method to produce crumpled dispersive nanosheets in solution through general base-washing treatment by taking advantage of the amphipathy of GO nanosheets. With the dissociation of oxygen-functional groups on nanosheets in alkaline environment, highly water-soluble oxidative debris (OD) would fall off from the nanosheets due to the increase of electrostatic repulsions, and resulted in the crumple of the flat sheets, while the covalent oxygen-functional groups on the nanosheets were reserved. As a result, the nanosheets remained dispersible in solution, and could be used directly for surface modifications. Pt nanoparticles could be directly deposited onto both sides of the sheets through common nucleation and growth from precursor ions process. Compared with flat graphene-based hybrid, the catalytic performance of crumpled-graphene-Pt (CG-Pt) is more excellent and attractive, and corresponding apparent kinetic rate constant (kₐₚₚ) of CG-Pt toward 4-nitrophenol reduction is enhanced by 2.7–4.6-fold. This study provides a new and facile way to fabricate crumpled nanosheets and demonstrates to be easy modified for various purpose.
Afficher plus [+] Moins [-]Size-dependent escape risk of lumpfish (Cyclopterus lumpus) from salmonid farm nets
2021
Herrmann, Bent | Sistiaga, Manu | Jørgensen, Terje
In the last decade, the salmon aquaculture industry has considerably increased the use of lumpfish juveniles as cleaner fish. Potential escape of reared lumpfish into the wild may spread diseases or genetically contaminate wild stocks. The guidelines for minimum sizes of cleaner fish to use in aquaculture cages are currently based on simple mesh penetration tests. However, these guidelines do not consider the potential compressibility of fish or changes in mesh state due to factors such as sea conditions and maintenance operations. This study shows that the industry-recommended minimum stocking sizes for a given mesh size may result in escape risk and that ignoring fish compressibility and mesh state can lead to underestimation of the lumpfish sizes that are able to escape. Our results can be used to develop new guidelines that will contribute to reduced escape of lumpfish from salmonid farms and lessen the potential environmental consequences.
Afficher plus [+] Moins [-]Detached eddy simulation of turbulent flow in isolated street canyons of different aspect ratios
2015
Scungio, Mauro | Arpino, Fausto | Cortellessa, Gino | Buonanno, Giorgio
Air quality management in urban areas requires the use of advanced modeling tools, able to predict and evaluate the pollution level under different traffic and meteorological conditions. In the present paper, the Artificial Compressibility version of the Characteristic Based Split algorithm (AC–CBS) was used to assess the performance of the Spalart–Allmaras based Detached Eddy Simulation (SA–DES) model, for the calculation of incompressible turbulent flow in different urban street canyon configurations. To our knowledge, the DES version of the SA turbulence model was applied in this work for the first time for the simulation of turbulent flow in a street canyon. The proposed DES model was able to accurately reproduce the turbulent characteristics of the flow compared with results from real street canyon experiments, wind tunnel experiments, and also to that obtained with RANS simulations. These results are very similar to the ones obtained from Large Eddy Simulation (LES) of street canyons flow reported in some recent publications, but with the potential characteristic of reduced computational costs. The DES approach is very promising for the simulation of transient turbulent flows in urban areas when complex three–dimensional domains are considered. The performance of the DES model evaluated for the mean dimensionless streamwise velocity profiles was comparable to that of Reynolds–Averaged Navier–Stokes RANS approach if referred to Hit Rate (HR) validation metric, and even better if referred to Factor of two observation (FAC2) validation metric. An accurate reproduction of the turbulent flow is crucial for urban pollutant dispersion simulations, since the distribution of the pollutant concentrations could differ by order of magnitude in the different points of the street canyon. DES approach results were able to accurately predict the unsteadiness characteristic of the flow, and to reproduce some minor vortex structures, which were not observed in the RANS cases, that will lead to a more accurate reproduction of the pollutant concentrations.
Afficher plus [+] Moins [-]Finite-time compressibility as an agent of frequent spontaneous patch formation in the surface layer: A case study for the Gulf of Finland, the Baltic Sea
2014
Giudici, Andrea | Soomere, Tarmo
We explore the possibilities for spontaneous formation of surface patches with high concentrations of contaminants through time correlations of the convergence field and the Lagrangian transport. The test area is the Gulf of Finland, the Baltic Sea, where surface velocity fields show extensive convergence. The flow properties are extracted from 3D velocity fields simulated for 1987–1991 using the OAAS model with a resolution of 1mile. The focus is on the spatial distribution of the areas in which the values of finite-time flow compressibility of surface velocity fields exceed the threshold for clustering of floats. The distribution of such areas is asymmetric, with likely areas of patch formation located predominantly in the southern and eastern regions of the gulf. Out of nine areas of likely patch formation, six are located along the coast in regions of frequent downwelling, while three are identified in the central region of the gulf.
Afficher plus [+] Moins [-]Reuse of waste tyre products as a soil reinforcing material: a critical review
2021
Mistry, Mohit K. | Shukla, Shruti J. | Solanki, Chandresh H.
All over the globe, the generation of industrial waste has been increased due to the increasing demand for modern civilisation. In the developing countries like India, it is growing vigorously which eventually increases the production of vehicles and results in the more number of waste tyres. Despite the dumping such hazardous waste in landfills, stockpiling, and burning, their feasible utilisation in the modification of soil and concrete can be a good alternative option for their disposal. This paper enlightens the published work carried out by various researchers to enhance the mechanical properties of clayey soil using various forms of waste tyres. The effects of different forms of waste tyres on consistency limits, compaction characteristics, strength characteristics, compressibility characteristics, permeability and California-bearing ratio of cohesive soils have been reviewed. The review results show that the use of waste tyre products in ground improvement can be an economical solution for the construction industries and optimistic future as its disposal option. Still, further investigations and more research studies are required to consolidate the remarks drawn by the past researchers for its utilisation in the construction of highway/railway embankments and other field applications.
Afficher plus [+] Moins [-]Influence of real and synthetic municipal solid waste leachates on consolidation and shear strength behaviour of bentonites
2021
Ray, Saswati | Miśra, Anila | Kalamdhad, Ajay S.
For safe disposal of wastes in landfills, compacted bentonite is recommended as bottom liners due to their significant cation exchange (CEC) and swelling capacity, low permeability and large specific surface area (SSA). The present investigation carried out various experimental studies determining the compressibility behaviour and unconfined compressive strength (UCS) of two different compacted bentonites in the presence of municipal solid waste (MSW) and synthetic MSW leachates. Various examinations were conducted determining alterations in consolidation parameters like the coefficient of consolidation (cᵥ), time taken for 90% consolidation (t₉₀) and compression index (Cc) with both leachates. The outcomes reveal that Cc and t₉₀ values of both bentonites declined; however, cᵥ value rose. Results also indicated that under any given consolidation pressure, a lesser void ratio was achieved for leachates. UCS of both bentonites reduced with leachates’ interaction yet, lying within the recommended a value higher than 200 kPa. A comparative assessment of the two bentonites displayed that bentonite having higher CEC and swelling capacity, and SSA unveiled more excellent Cc and t₉₀ values and a reduction in the UCS. A higher variation in behaviour of bentonites was perceived in the existence of MSW leachate in comparison to synthetic MSW leachate.
Afficher plus [+] Moins [-]Enhanced dewater efficiency for river sediment by top-to-bottom water transmitting channels with different materials
2020
Shi, Zhuo | Pi, Kewu | Huang, Xuanming | Shi, Yafei | Chen, Ziwen | Tang, Ruyu | Hu, Zehui | Gerson, Andrea R. | Liu, Defu
Artificial top-to-bottom water transmitting channels made of threads of wool blend (WT), cotton (CT), flax (FT), and polyethylene (PET) were used to enhance the dewater efficiency for river sediment. In addition, the disordered channels composed of 3-mm-long WT segments mixed randomly into the river sediment were also employed. The most effective dewatering channels were found to be top-to-bottom WT channels with water absorption capacity of 8.7 ± 0.5 g · g⁻¹ and volume compressibility of 2.94 ± 0.11. On the application of 0.1 MPa pressure to the mud surface, with initial water content of 60.0 ± 0.2 wt%, the water content obtained with channel material weight 0.411 wt% dry solids and channel to a mud cake height ratio of 0.95 upon 90-min dewatering was 39.6 ± 0.7 wt% with enhanced dewaterability, compared to that without channel addition, of 74.9 ± 0.9 kg · kg⁻¹ · h⁻¹. Using the same parameters, enhanced dewaterability was only 69.1 ± 0.3, 55.2 ± 2.8, and 9.1 ± 0.9 kg · kg⁻¹ · h⁻¹ for CT, FT, and PET channels, respectively. Moreover, the final water content of the mud cake dewatered in the presence of disordered WT channels at dosage 1.10 wt% was 49.8 ± 0.7 wt% with enhanced dewaterability of 5.9 ± 0.5 kg · kg⁻¹ · h⁻¹ only. These demonstrate that the compressibility of the water transmitting material is the main factor affecting dewatering efficiency with the water absorption capacity also being important.
Afficher plus [+] Moins [-]Experimental study on static and dynamic mechanical properties of phosphogypsum
2021
Lu, Ting | Wang, Wensong | Wei, Zuoan | Yang, Yonghao | Cao, Guansen
Phosphogypsum (PG) is a solid waste product of the wet-process phosphoric acid industry that accumulates in large amounts on the ground, forming PG ponds. In recent years, the amount of PG produced and discharged into ponds has increased significantly with the increase in the market demand for phosphate fertilizers. To enrich the basic knowledge of PG properties and provide basic data for the stability analysis of PG dams, a series of laboratory geotechnical tests, including permeability tests, compressibility tests, triaxial shear tests, and dynamic triaxial tests, were conducted in this study. During the preparation of the test samples, solubility and high-temperature dehydration of PG were considered. The results indicated that PG exhibits medium compressibility and medium to weak permeability characteristics. The stress-strain curves of the triaxial shear tests were divided into three typical stages: initial deformation stage, strain hardening stage, and destruction stage. With increasing dry density and consolidation confining pressure, both the shear strength and deformation modulus significantly increased. The relationship between the deformation modulus and confining pressure gradually changed from linear to logarithmic with increasing density. The liquefaction resistance curves (CSR–NL curves) of PG were expressed by power functions. With increasing dry density, the curves shifted higher and became steeper. Compared with the Hardin–Drnevich model, the Davidenkov model was found to be more suitable for describing the relationship between the dynamic shear modulus ratio and damping ratio of PG and the dynamic shear strain. Furthermore, compared with those of tailings and natural soils, the engineering mechanical properties of PG were relatively poor, which may be related to its uniform particle distribution and neat particle stacking structure.
Afficher plus [+] Moins [-]The role of lime in dredged mud dewatered by a plate and frame filter press and potential substitutes
2021
Cui, Yan | Zhu, Wei | Wu, Silin | Liu, Jiming | Hou, Hao | Lin, Naixi
Dredged mud is a kind of construction material that can be reused as waste. It needs to be dehydrated before it is used. At present, plate and frame pressure filtration (hereafter referred to as PFP) using lime for conditioning after flocculation is widely employed. The addition of lime causes the mud cake to exhibit a high pH, and reduces its subsequent use. In response to this problem, this study examines the mechanism of lime in the PFP and identifies neutral alternative materials according to this principle. British kaolin-modified mud and dredged Taihu mud were treated with lime and various conditioners, and the size and specific resistance (hereafter referred to as SRF) of the floc were measured to evaluate the mud’s properties, the compressibility index of the mud layer, the dewatering effect of the PFP, and the properties of the cake. The results showed that lime ensures the filtration speed in the pumping-filtering phase by increasing floc stiffness and reducing the compressibility of the layer, so that continuous drainage can achieve a high-pressure filtration efficiency. SAC can basically achieve the same pressure filtration principle and dewatering effect as lime under conditions in which the pH of the mud cake is close to neutral.
Afficher plus [+] Moins [-]Strength and microstructure characteristics of the recycled rubber tire-sand mixtures as lightweight backfill
2018
Zhang, Tao | Cai, Guojun | Duan, Weihong
The disposal of scrap rubber tires has induced critical environmental issue worldwide due to the rapid increase in the number of vehicles. Recycled scrap tires as a construction material in civil engineering have significant environmental benefits from a waste management perspective. A systematic study that deals with strength and microstructure characteristics of the rubber-sand mixtures is initiated, and mechanical response of the mixtures is discussed in this investigation. Experiments were conducted to evaluate the effects of rubber fraction on the basic properties including mass density (ρ), stress-strain characteristics, shear strength, and unconfined compression strength (q ᵤ) of the rubber-sand mixtures. Additionally, scanning electron microscopy (SEM) was carried out to reveal the microstructure characteristics of the mixtures with various rubber fractions. A discussion on the micromechanics of the mixtures also was conducted. This study demonstrates that the ρ, friction angle, and q ᵤ decrease linearly with an increase in rubber fraction, whereas shear strain at peak increases. The stress-strain characteristics of the rubber-sand mixtures shift from brittle to ductile as the rubber fraction increase. These changes are attributed to remarkably lower stiffness and higher compressibility of the rubber particle compared with those of the conventional mineral aggregates. With an increase in the rubber fraction, the mechanical response of rubber-sand mixtures exhibits two types: sand-like material and rubber-like material. Rubber particle possesses the capacity to prevent the contacted sand particles from sliding at lower rubber fraction, whereas it transmits the applied loadings as the rubber fraction increased. This outcome reinforces the practicability of using recycled rubber tire-sand mixtures as a lightweight backfill in subbase/base applications.
Afficher plus [+] Moins [-]