Affiner votre recherche
Résultats 1-10 de 30
Health hazards of child labor in the leather products and surgical instrument manufacturing industries of Sialkot, Pakistan
2017
Junaid, Muhammad | Malik, Riffat Naseem | Pei, De-Sheng
Child labor is a major challenge in the developing countries and comprehensive health hazard identification studies on this issue are still lacking. Therefore, the current study is an effort to highlight the health concerns of child labor exposed in the key small scale industries of Sialkot, Pakistan. Our findings revealed jolting levels of heavy metals in the urine, blood, serum, saliva, and hair samples collected from the exposed children. For example, in the urine samples, Cd, Cr, Ni, and Pb were measured at the respective concentrations of 39.17, 62.02, 11.94 and 10.53 μg/L in the surgical industries, and 2.10, 4.41, 1.04 and 5.35 μg/L in the leather industries. In addition, source apportionment revealed polishing, cutting, and welding sections in the surgical industries and surface coating, crusting, and stitching sections in the leather industries were the highest contributors of heavy metals in the bio-matrices of the exposed children, implying the dusty, unhygienic, and unhealthy indoor working conditions. Further, among all the bio-matrices, the hair samples expressed the highest bioaccumulation factor for heavy metals. In accordance with the heavy metal levels reported in the exposed children, higher oxidative stress was found in the children working in the surgical industries than those from the leather industries. Moreover, among heavy metals’ exposure pathways, inhalation of industrial dust was identified as the primary route of exposure followed by the ingestion and dermal contact. Consequently, chemical daily intake (CDI), carcinogenic and non-carcinogenic hazard quotients (HQs) of heavy metals were also reported higher in the exposed children and were also alarmingly higher than the corresponding US EPA threshold limits. Taken all together, children were facing serious health implications in these industries and need immediate protective measures to remediate the current situation.
Afficher plus [+] Moins [-]Metagenome enrichment approach used for selection of oil-degrading bacteria consortia for drill cutting residue bioremediation
2018
Guerra, Alaine B. | Oliveira, Jorge S. | Silva-Portela, Rita C.B. | Araújo, Wydemberg | Carlos, Aline C. | Vasconcelos, Ana Tereza R. | Freitas, Ana Teresa | Domingos, Yldeney Silva | de Farias, Mirna Ferreira | Fernandes, Glauber José Turolla | Agnez-Lima, Lucymara F.
Drill cuttings leave behind thousands of tons of residues without adequate treatment, generating a large environmental liability. Therefore knowledge about the microbial community of drilling residue may be useful for developing bioremediation strategies. In this work, samples of drilling residue were enriched in different culture media in the presence of petroleum, aiming to select potentially oil-degrading bacteria and biosurfactant producers. Total DNA was extracted directly from the drill cutting samples and from two enriched consortia and sequenced using the Ion Torrent platform. Taxonomic analysis revealed the predominance of Proteobacteria in the metagenome from the drill cuttings, while Firmicutes was enriched in consortia samples. Functional analysis using the Biosurfactants and Biodegradation Database (BioSurfDB) revealed a similar pattern among the three samples regarding hydrocarbon degradation and biosurfactants production pathways. However, some statistical differences were observed between samples. Namely, the pathways related to the degradation of fatty acids, chloroalkanes, and chloroalkanes were enriched in consortia samples. The degradation colorimetric assay using dichlorophenolindophenol as an indicator was positive for several hydrocarbon substrates. The consortia were also able to produce biosurfactants, with biosynthesis of iturin, lichnysin, and surfactin among the more abundant pathways. A microcosms assay followed by gas chromatography analysis showed the efficacy of the consortia in degrading alkanes, as we observed a reduction of around 66% and 30% for each consortium in total alkanes. These data suggest the potential use of these consortia in the bioremediation of drilling residue based on autochthonous bioaugmentation.
Afficher plus [+] Moins [-]Strategies for enhancing the phytoremediation of cadmium-contaminated agricultural soils by Solanum nigrum L
2011
Ji, Puhui | Sun, Tieheng | Song, Yufang | Ackland, M Leigh | Liu, Yang
Field trials contribute practical information towards the development of phytoremediation strategies that cannot be provided by laboratory tests. We conducted field experiments utilizing the Cd hyperaccumulator plant Solanum nigrum L., on farmland contaminated with 1.91 mg kg⁻¹ Cd in the soil. Our study showed that S. nigrum has a relatively high biomass. Planting density had a significant effect on the plant biomass and thus on overall Cd accumulation. For double harvesting, an optimal cutting position influenced the amount of Cd extracted from soils. Double cropping was found to significantly increase the amount of Cd extracted by S. nigrum. Fertilizing had no significant effect on plant biomass or on the Cd remediation of the soil over the short-term period. Our study indicates that S. nigrum can accumulate Cd from soils where the concentrations are relatively low, and thus has application for use in decontamination of slightly to moderately Cd-contaminated soil.
Afficher plus [+] Moins [-]A dynamic modelling approach for estimating critical loads of nitrogen based on plant community changes under a changing climate
2011
Belyazid, Salim | Kurz, Dani | Braun, Sabine | Sverdrup, Harald | Rihm, Beat | Hettelingh, Jean-Paul
A dynamic model of forest ecosystems was used to investigate the effects of climate change, atmospheric deposition and harvest intensity on 48 forest sites in Sweden (n = 16) and Switzerland (n = 32). The model was used to investigate the feasibility of deriving critical loads for nitrogen (N) deposition based on changes in plant community composition. The simulations show that climate and atmospheric deposition have comparably important effects on N mobilization in the soil, as climate triggers the release of organically bound nitrogen stored in the soil during the elevated deposition period. Climate has the most important effect on plant community composition, underlining the fact that this cannot be ignored in future simulations of vegetation dynamics. Harvest intensity has comparatively little effect on the plant community in the long term, while it may be detrimental in the short term following cutting. This study shows: that critical loads of N deposition can be estimated using the plant community as an indicator; that future climatic changes must be taken into account; and that the definition of the reference deposition is critical for the outcome of this estimate.
Afficher plus [+] Moins [-]Gridded emission inventory of short-chain chlorinated paraffins and its validation in China
2017
Jiang, Wanyanhan | Huang, Tao | Mao, Xiaoxuan | Wang, Li | Zhao, Yuan | Jia, Chenhui | Wang, Yanan | Gao, Hong | Ma, Jianmin
China produces approximately 20%–30% of the total global chlorinated paraffins (CPs). The establishment of a short-chain CP (SCCP) emission inventory is a significant step toward risk assessment and regulation of SCCPs in China and throughout the globe. This study developed a gridded SCCPs emission inventory with a 1/4° longitude by 1/4° latitude resolution from 2008 to 2012 for China, which was based on the total annual CPs emissions for the nation. The total national SCCPs emission during this 5-year period was 5651.5 tons. An additive in metal cutting fluids was a major emission source in China, contributing 2680.2 tons to the total atmospheric emissions of SCCPs from 2008 to 2012, followed by the production of CPs (2281.8 tons), plasticizers (514.3 tons), flame retardants (108.6 tons), and net import (66.6 tons). Most of these emission sources are located along the eastern seaboard of China and southern China. A coupled atmospheric transport model was employed to simulate environmental contamination by SCCPs using the gridded emission inventory of SCCPs from 2008 to 2012 as the model initial conditions. Simulated atmospheric and soil concentrations were compared with field monitoring data to validate the emission inventory. The results showed good consistency between modeled and field sampling data, supporting the reliability and credibility of the gridded SCCPs emission inventory that was developed in the present study.
Afficher plus [+] Moins [-]Validation of ATR FT-IR to identify polymers of plastic marine debris, including those ingested by marine organisms
2018
Jung, Melissa R. | Horgen, F David | Orski, Sara V. | Rodriguez C., Viviana | Beers, Kathryn L. | Balazs, George H. | Jones, T Todd | Work, Thierry M. | Brignac, Kayla C. | Royer, Sarah-Jeanne | Hyrenbach, K David | Jensen, Brenda A. | Lynch, Jennifer M.
Polymer identification of plastic marine debris can help identify its sources, degradation, and fate. We optimized and validated a fast, simple, and accessible technique, attenuated total reflectance Fourier transform infrared spectroscopy (ATR FT-IR), to identify polymers contained in plastic ingested by sea turtles. Spectra of consumer good items with known resin identification codes #1–6 and several #7 plastics were compared to standard and raw manufactured polymers. High temperature size exclusion chromatography measurements confirmed ATR FT-IR could differentiate these polymers. High-density (HDPE) and low-density polyethylene (LDPE) discrimination is challenging but a clear step-by-step guide is provided that identified 78% of ingested PE samples. The optimal cleaning methods consisted of wiping ingested pieces with water or cutting. Of 828 ingested plastics pieces from 50 Pacific sea turtles, 96% were identified by ATR FT-IR as HDPE, LDPE, unknown PE, polypropylene (PP), PE and PP mixtures, polystyrene, polyvinyl chloride, and nylon.
Afficher plus [+] Moins [-]Spreading of drill cuttings and sediment recovery of three exploration wells of different ages, SW Barents Sea, Norway
2018
Junttila, Juho | Dijkstra, Noortje | Aagaard-Sørensen, Steffen
Five stations (≤250 m from the well heads) from three exploration wells of different ages from the SW Barents Sea were studied to investigate the spreading of drill cuttings and sediment quality. Two of the wells were drilled before the restriction of use of oil-based drilling fluids (1993). Elevated concentrations of Ba were found in sediments near all the wells with the highest concentrations at ≤60 m from the well head. The thickness of drill cutting layers was between >20 cm (well head) and 2 cm (250 m from the well head). The sediment quality varied from very bad (oldest well) to background (normal) (newer wells). Regulations led to better sediment quality. Metal concentrations from the oldest well suggested that the top 4 cm of the core represents sediment recovery. However, Ba concentrations of the top sediment layer at all the stations of the three wells indicate no physical recovery.
Afficher plus [+] Moins [-]Monitoring strategies for drill cutting discharge in the vicinity of cold-water coral ecosystems
2012
Purser, Autun | Thomsen, Laurenz
Cold-water coral reefs represent some of the most biodiverse and biomass rich ecosystems in the marine environment. Despite this, ecosystem functioning is still poorly understood and the susceptibility of key species to anthropogenic activities and pollutants is unknown. In European waters, cold-water corals are often found in greatest abundance on the continental margin, often in regions rich in hydrocarbon reserves. In this viewpoint paper we discuss some of the current strategies employed in predicting and minimizing exposure of cold-water coral reef ecosystems on the Norwegian margin to waste materials produced during offshore drilling operations by the oil and gas industry. In the light of recent in situ and experimental research conducted with the key reef species Lophelia pertusa, we present some possible improvements to these strategies which may be utilized by industry and managers to further reduce the likelihood of exposure. We further highlight important outstanding research questions in this field.
Afficher plus [+] Moins [-]Is the cutting of oil contaminated marshes an efficient clean-up technique in a subtropical estuary?
2011
Wolinski, André L.T.O. | Lana, Paulo C. | Sandrini-Neto, Leonardo
Cutting and removal of oil-impacted marsh plants are still used worldwide as a clean-up and recovery technique. To experimentally test the efficacy of cutting and removing marsh plants under subtropical conditions, we simulated an oil spill (Bunker MF-180) in Spartina alterniflora marshes and compared the responses of plant height, biomass, density of culms and number of flowering plants in high and low energy areas in Paranaguá Bay (S Brazil) for about 9months. Cutting and removal were inefficient in promoting or accelerating the recovery of the impacted areas. Cut or uncut impacted marshes fully recovered within 6months, both in low and high energy areas. Plant cutting should be practiced only when there is an effective risk of contamination of groundwater near urban areas, when obvious aesthetical issues are involved in areas of touristic interest or when there are real short-term conservation risks to threatened species.
Afficher plus [+] Moins [-]Sedimentation on the cold-water coral Lophelia pertusa: Cleaning efficiency from natural sediments and drill cuttings
2011
Larsson, Ann I. | Purser, Autun
Anthropogenic threats to cold-water coral reefs are trawling and hydrocarbon drilling, with both activities causing increased levels of suspended particles. The efficiency of Lophelia pertusa in rejecting local sediments and drill cuttings from the coral surface was evaluated and found not to differ between sediment types. Further results showed that the coral efficiently removed deposited material even after repeated exposures, indicating an efficient cleaning mechanism. In an experiment focusing on burial, fine-fraction drill cuttings were deposited on corals over time. Drill cutting covered coral area increased with repeated depositions, with accumulation mainly occurring on and adjacent to regions of the coral skeleton lacking tissue cover. Tissue was smothered and polyp mortality occurred where polyps became wholly covered by material. Burial of coral by drill cuttings to the current threshold level used in environmental risk assessment models by the offshore industry (6.3mm) may result in damage to L. pertusa colonies.
Afficher plus [+] Moins [-]