Affiner votre recherche
Résultats 1-7 de 7
Monitoring and environmental risk assessment of pesticide residues and some of their degradation products in natural waters of the Spanish vineyard region included in the Denomination of Origin Jumilla
2020
Herrero-Hernández, Eliseo | Simón-Egea, Ana B. | Sánchez-Martín, María J. | Rodríguez-Cruz, M Sonia | Andrades, M Soledad
Water pollution by pesticides used in agriculture is currently a major concern both in Spain and in Europe as a whole, prompting the need to evaluate water quality and ecological risk in areas of intensive agriculture. This study involved monitoring pesticide residues and certain degradation products in surface and ground waters of the Denomination of Origin (DO) Jumilla vineyard area in Spain. Sixty-nine pesticides were selected and evaluated at twenty-one sampling points using a multi-residue analytical method, based on solid-phase extraction (SPE) and analysis by liquid chromatography coupled with mass spectrometry (LC-MS), providing reliable results. Twenty-six compounds from those selected were detected in the samples analyzed (eleven insecticides including one degradation product, nine herbicides, and six fungicides) and fifteen of them were found in concentrations over 0.1 μg L⁻¹ (upper threshold established by the EU for pesticides detected in waters for human consumption). Indoxacarb was present in more than 70% of the samples, being the most frequently detected compound in water samples. Some pesticides were ubiquitous in all the water samples. Ecotoxicological risk indicators, toxic units (TUs) and risk quotients (RQs), for algae, Daphnia magna and fish were calculated to estimate the environmental risk of the presence of pesticides in waters. The compounds with the highest risk were the herbicides pendimethalin, with RQ values > 1 for the three aquatic organisms, and diflufenican, posing a high risk for algae and fish, and the insecticide chlorpyrifos, with a high risk for Daphnia magna and fish. The ∑TUi determined for water at each sampling point posed only a high risk for the three aquatic organisms in a sample. These results are important for considering the selection of pesticides with less environmental risk in intensive agricultural areas.
Afficher plus [+] Moins [-]Leaching of herbicidal residues from gravel surfaces – A lysimeter-based study comparing gravels with agricultural topsoil
2020
Albers, Christian Nyrop | Jacobsen, Ole Stig | Bester, Kai | Jacobsen, Carsten Suhr | Carvalho, Pedro N.
Evidence from the past shows that pesticide use in populated areas may impact groundwater quality. The approval of herbicides such as diflufenican and glyphosate for use on paved and unpaved gravel surfaces in the European Union is based on their behaviour and fate in agricultural soils. However, this might be very different from their fate in gravel surfaces. We therefore conducted an outdoor study with 21 small lysimeters containing different gravel types and a sandy arable topsoil as control. The lysimeters were sprayed with a commercial product for gardening, containing diflufenican and glyphosate. The concentrations of the herbicides and their relevant degradation products in the outlet was followed for 19 months. Diflufenican, glyphosate and AMPA did not leach from any of the lysimeters. However, one diflufenican degradation product (AE-0) leached from two of the gravel types for more than a year and a second degradation product (AE-B) leached from all gravels for up to one year. Concentrations in the leachate peaked at 0.5–3 μg/L, with highest concentrations over the longest periods observed with rock chippings on top of the gravel. We conclude, that the different properties of gravel compared to those of agricultural soils may lead to very different herbicide leaching patterns but also that the leaching depends highly on the type of gravel and type of herbicide.
Afficher plus [+] Moins [-]Can Simple Soil Parameters Explain Field-Scale Variations in Glyphosate-, Bromoxyniloctanoate-, Diflufenican-, and Bentazone Mineralization?
2015
Norgaard, Trine | de Jonge, Lis W. | Moldrup, Per | Olsen, Preben | Johnsen, Anders R.
The large spatial heterogeneity in soil physico-chemical and microbial parameters challenges our ability to predict and model pesticide leaching from agricultural land. Microbial mineralization of pesticides is an important process with respect to pesticide leaching since mineralization is the major process for the complete degradation of pesticides without generation of metabolites. The aim of our study was to determine field-scale variation in the potential for mineralization of the herbicides glyphosate, bromoxyniloctanoate, diflufenican, and bentazone and to investigate whether this variation can be predicted by variations in basic soil parameters. Sixty-five soil samples were sampled from an agricultural, loamy field in Silstrup, Denmark, from a 60 × 165 m rectangular grid. The mineralization potential of the four pesticides was determined using a 96-well microplate ¹⁴C-radiorespirometric method. Initial mineralization rates were determined using first-order kinetics for glyphosate and bromoxyniloctanoate and zero-order kinetics for diflufenican and bentazone. The mineralization rates of the four pesticides varied between the different pesticides and the different soil samples, but we could not establish correlations between the pesticide mineralization rates and the measured soil parameters. Only the glyphosate mineralization rates showed slightly increasing mineralization potentials towards the northern area of the field, with increasing clay and decreasing OC contents. The mineralization potentials for glyphosate and bentazone were compared with 9-years leaching data from two horizontal wells 3.5 m below the field. The field-scale leaching patterns, however, could not be explained by the pesticide mineralization data. Instead, field-scale pesticide leaching may have been governed by soil structure and preferential flow events.
Afficher plus [+] Moins [-]Residues of plant protection products in grey partridge eggs in French cereal ecosystems
2016
Bro, Elisabeth | Devillers, James | Millot, Florian | Decors, Anouk
The contamination of the eggs of farmland birds by currently used plant protection products (PPPs) is poorly documented despite a potential to adversely impact their breeding performance. In this context, 139 eggs of 52 grey partridge Perdix perdix clutches, collected on 12 intensively cultivated farmlands in France in 2010–2011, were analysed. Given the great diversity of PPPs applied on agricultural fields, we used exploratory GC/MS-MS and LC/MS-MS screenings measuring ca. 500 compounds. The limit of quantification was 0.01 mg/kg, a statutory reference. A total of 15 different compounds were detected in 24 clutches. Nine of them have been used by farmers to protect crops against fungi (difenoconazole, tebuconazole, cyproconazole, fenpropidin and prochloraz), insects (lambda-cyhalothrin and thiamethoxam/clothianidin) and weeds (bromoxynil and diflufenican). Some old PPPs were also detected (fipronil(+sulfone), HCH(α,β,δ isomers), diphenylamine, heptachlor(+epoxyde), DDT(Σisomers)), as well as PCBs(153, 180). Concentrations ranged between <0.01 and 0.05 mg/kg but reached 0.067 (thiamethoxam/clothianidin), 0.11 (heptachlor + epoxyde) and 0.34 (fenpropidin) mg/kg in some cases. These results testify an actual exposure of females and/or their eggs to PPPs in operational conditions, as well as to organochlorine pollutants or their residues, banned in France since several years if not several decades, that persistently contaminate the environment.Routes of exposure, probability to detect a contamination in the eggs, and effects on egg/embryo characteristics are discussed with regard to the scientific literature.
Afficher plus [+] Moins [-]Analysis of airborne pesticides from different chemical classes adsorbed on Radiello® Tenax® passive tubes by thermal-desorption-GC/MS
2015
Raeppel, Caroline | Fabritius, Marie | Nief, Marie | Appenzeller, Brice M. R. | Briand, Olivier | Tuduri, Ludovic | Millet, Maurice
An analytical methodology using automatic thermal desorption (ATD) and GC/MS was developed for the determination of 28 pesticides of different chemical classes (dichlobenil, carbofuran, trifluralin, clopyralid, carbaryl, flazasulfuron, mecoprop-P, dicamba, 2,4-MCPA, dichlorprop, 2,4-D, triclopyr, cyprodinil, bromoxynil, fluroxypyr, oxadiazon, myclobutanil, buprofezin, picloram, trinexapac-p-ethyl, ioxynil, diflufenican, tebuconazole, bifenthrin, isoxaben, alphacypermethrin, fenoxaprop and tau-fluvalinate) commonly used in nonagricultural areas in atmospheric samples. This methodology was developed to evaluate the indoor and outdoor atmospheric contamination by nonagricultural pesticides. Pesticides were sampled passive sampling tubes containing Tenax® adsorbent. Since most of these pesticides are polar (clopyralid, mecoprop-P, dicamba, 2,4-MCPA, dichlorprop, 2,4-D, triclopyr, bromoxynil, fluroxypyr, picloram, trinexapac-p-ethyl and ioxynil), a derivatisation step is required. For this purpose, a silylation step using N-(t-butyldimethylsilyl)-N-methyltrifluoroacetamide (MtBSTFA) was added before thermal desorption. This agent was chosen since it delivers very specific ions on electronic impact (m/z = M-57). This method was established with special consideration for optimal thermal desorption conditions (desorption temperature, desorb flow and duration; trap heating duration and flow; outlet split), linear ranges, limits of quantification and detection which varied from 0.005 to 10 ng and from 0.001 to 2.5 ng, respectively, for an uncertainty varied from 8 to 30 %. The method was applied in situ to the analysis of passive tubes exposed during herbicide application to an industrial site in east of France.
Afficher plus [+] Moins [-]Microbial and enzymatic activity of soil contaminated with a mixture of diflufenican + mesosulfuron-methyl + iodosulfuron-methyl-sodium
2015
Baćmaga, Małgorzata | Borowik, Agata | Kucharski, Jan | Tomkiel, Monika | Wyszkowska, Jadwiga
The aim of this study was to determine the effect of three active substances, diflufenican, mesosulfuron-methyl and iodosulfuron-methyl-sodium, applied in combination, on soil microbial counts, the structure of soil microbial communities, activity of soil enzymes and their resistance to the tested product, the biochemical indicator of soil fertility, and spring wheat yield. Soil samples with the granulometric composition of sandy loam with pHKCₗ 7.0 were used in a pot experiment. The herbicide was applied to soil at seven doses: 0.057 (dose recommended by the manufacturer), 1.140, 2.280, 4.560, 9.120, 18.240 and 36.480 mg kg⁻¹ soil DM. Uncontaminated soil served as the control treatment. It was found that a mixture of the tested active substances increased the counts of total oligotrophic bacteria and spore-forming oligotrophic bacteria, organotrophic bacteria and actinomycetes, decreased the counts of Azotobacter and fungi, and modified the structure of soil microbial communities. The highest values of the colony development (CD) index and the ecophysiological (EP) index were observed in fungi and organotrophic bacteria, respectively. The herbicide applied in the recommended dose stimulated the activity of catalase, urease and acid phosphatase, but it had no effect on the activity of dehydrogenases, alkaline phosphatase, arylsulfatase and β-glucosidase. The highest dose of the analyzed substances (36.480 mg kg⁻¹) significantly inhibited the activity of dehydrogenases, acid phosphatase, alkaline phosphatase and arylsulfatase. The values of the biochemical soil fertility indicator (BA₂₁) decreased in response to high doses of the herbicide. Urease was most resistant and dehydrogenases were least resistant to soil contamination with a mixture of diflufenican + mesosulfuron-methyl + iodosulfuron-methyl-sodium. The analyzed herbicide had an adverse influence on spring wheat yield, and doses of 18.240 and 36.480 mg kg⁻¹ led to eventual death of plants.
Afficher plus [+] Moins [-]Pesticide pressure and fish farming in barrage pond in Northeastern France. Part II: residues of 13 pesticides in water, sediments, edible fish and their relationships
2013
Lazartigues, Angélique | Thomas, Marielle | Cren-Olivé, Cécile | Brun-Bellut, Jean | Le Roux, Yves | Banas, Damien | Feidt, Cyril
Residues of pesticides in fish farming productions from barrage ponds are seldom studied in spite of increasing health questionings and environmental concerns. The purpose of this study is to establish the pesticide contamination profiles of sediments and edible fish from five ponds in Northeastern France. Multi-residues method and liquid chromatography–tandem mass spectrometry analysis were used to quantify 13 pesticides (azoxystrobin, carbendazim, clomazone, diflufenican, dimethachlor, fluroxypyr, iprodion, isoproturon, mesosulfuron-methyl, metazachlor, napropamid, quizalofop and thifensulfuron-methyl). Ten sediments and 143 muscles samples were analysed, corresponding to two successive fishing campaigns (first fishing date and second fishing date (P2), about 1 year later) on five sites (noted C-0, C-25, C-45, C-75 and C-85 to express the increasing gradient of crop area). Isoproturon was present in all sediments samples (1.8–56.4 μg/kg dry weight). During P2 period, carbendazim was quantified in the fish of site C-0 (0.09 ± 0.02, 0.2 ± 0.1 and 0.17 ± 0.06 μg/kg wet weight (ww) for roach, carp and perch, respectively). Metazachlor was only quantified in perch of the site C-25 (0.13 ± 0.02 μg/kg ww). Concentrations of isoproturon were similar for the sites C-45 and C-75 with 0.4 ± 0.1 and 0.75 ± 0.06 μg/kg ww for carp and perch, respectively. Contamination of fish reflected generally concentrations in surroundings. Isoproturon was the most concentrated and its main source was water for perch while carp was exposed through both water and sediments, highlighting their life strategies in pond.
Afficher plus [+] Moins [-]