Morphological tools can assist in the evaluation of effects of insecticides on non-target insects. Pyriproxyfen, a juvenile hormone analog, is known to interfere with growth and metamorphosis of insects. However, there are studies showing indirect effects on natural enemies, including green lacewings. Few prior studies describe morphological effects of pyriproxyfen on target insect organs, especially on natural enemies. Through morphological tools, this study aimed to characterize the midgut and fat body, both important organs of digestion and great metabolic activity respectively, of the predator Ceraeochrysa claveri after chronic exposure to pyriproxyfen. Larvae of C. claveri were fed Diatraea saccharalis egg clusters treated with pyriproxyfen in solution of 50 or 100 mg a.i. L⁻¹ throughout the larval stage. The biological data revealed significant increases in development time, especially in the third instar, and in cumulative mortality from the prepupal into the pupal stage. Morphological analysis of adult midgut (≤24 h old) showed damage including formation of epithelial folds, intercellular spaces, emission of cytoplasmic protrusions. Both fat body regions presented decrease of lipid droplets, vacuolization of trophocytes and mitochondrial injury featuring a multisystemic action. In both organs, pyriproxyfen exposure induced significant oxidative stress by mitochondrial superoxide production. Cytoprotective responses were induced in midgut and fat body cells by augmenting the number of cytoplasmic granules containing calcium and expression of HSP 90. Both organs proved to be efficient in presenting histopathological alterations, showing the sensitivity and applicability of this morphological tool for evaluating other insecticides in non-target organisms.

In recent years, pollution of antibiotics and heavy metal has often been reported in organic wastes. Saprophytic insects have been recorded as biological control agents in organic waste management. During organic waste conversion, the intestinal bacteria of the saprophytic insects play an important role in digestion, physiology, immunity and prevention of pathogen colonization. Black soldier fly (BSF) Hermetia illucens has been widely used as saprophytic insects and showed tolerance to sulfonamides (SAs) and cadmium (Cd). Diversity and changes in gut microbiota of black soldier fly larvae (BSFL) were evaluated through 16S rRNA high-throughput sequencing, and a decrease in diversity of gut microbiota along with an increase in SAs stress was recorded. Major members identified were Actinomycetaceae, Enterobacteriaceae, and Enterococcaceae. And fourteen multi-resistance Klebsiella pneumoniae strains were isolated. Two strains BSFL7-B-5 (from middle midgut of 7-day BSFL) and BSFL11-C-1 (from posterior midgut of 11-day BSFL) were found to be low-toxic and multi-resistance. The adsorption rate of SAs in 5 mg/kg solutions by these two strains reached 65.2% and 61.6%, respectively. Adsorption rate of Cd in 20 mg/L solutions was 77.2% for BSFL7-B-5. The strain BSFL11-C-1 showed higher than 70% adsorption rates of Cd in 20, 30 and 40 mg/L solutions. This study revealed that the presence of multi-resistance bacterial strains in the gut of BSFL helped the larvae against SAs or Cd stress. After determining how and where they are used, selected BSFL gut bacterial strains might be utilized in managing SAs or Cd contamination at suitable concentrations in the future.

Iron particles present in drinking water distribution systems (DWDSs) could cause discoloration, while organic pollutants in DWDSs, such as perfluorooctanoic acid (PFOA), could be enriched by iron particles. However, little is known about the enhanced effects of PFOA and iron particles in DWDSs. To fill in these knowledge gaps, herein, iron-PFOA (FEP) particles were generated using residual chlorine as an oxidant in drinking water conditions and then separated into different sizes (ranging from small to large: FEP-S, FEP-M ，and FEP-L). FEP-S harbored the greatest cytotoxicity among the sizes. Interestingly, our data revealed that the PFOA released from FEP particles transformed into PFOS (perfluorooctane sulfonate) upon digestion in the gastrointestinal environment (GI), and FEP-L bored the strongest transformation, showing a toxicity profile that was distinct from that of FEP-S. Furthermore, mechanistic studies revealed that FEP per se should be accountable for the conversion of PFOA to PFOS dependent on the generation of hydroxyl radicals (·OH) in GI, and that FEP-L revealed the greatest production of ·OH. Collectively, these results showed how iron particles and PFOA could result in enhanced toxicity effects in drinking water: (i) PFOA could increase the toxicity of iron particles by reducing particle size and inducing higher generation of ·OH; (ii) iron particles could induce the transformation of PFOA into more toxic PFOS through digestion.

Currently, 1.3 billion tonnes of food are thrown away each year, most of which are incinerated or landfilled causing large environmental, social, and economic issues. Therefore, the utilisation of food waste as biofertilisers, such as composts and digestates, is a solution to reduce the problems created by incineration and landfilling whilst simultaneously amending soils. The improper disposal of food wastes and bulking materials can contribute to high levels of contaminants within the end-product. Moreover, the food waste and bulking materials, themselves, may contain trace amounts of contaminants. These contaminants tend to have long half-lives, are easily mobile within soil and plants, can accumulate within the food supply chain, and have moderate to high levels of toxicity. This review aims to examine the current and emerging contaminants of high concern that impact the quality of food-waste fertilisers. The paper presents the volume of current and emerging contaminants of plastics, other physical (particulate) contaminants, heavy metals, pesticides, polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), per- and polyfluoroalkyl substances (PFAS), and pathogens within food-waste composts and digestates. Due to the large extent of organic chemical contaminants and the unknown level of toxicity and persistence, the risk assessment of organic chemical contaminants in the food-supply chain remains largely unknown. This study has presented available data from literature of various contaminants found in food waste, and composts and digestates derived from food waste, and evaluated the data with current regulations globally. Overall, to reduce contaminants in composts and digestates, more studies are required on the implementation of proper disposal separation, effective composting and digestion practices, increased screening of physical contaminants, development of compostable plastics, and increased regulatory policies on emerging, problematic contaminants. Moreover, examination of emerging contaminants in food-waste composts and digestates is needed to ensure food security and reduce future human-health risks.

Microplastic (MP) contamination is present in the entire marine environment from the sediment to the water surface and down to the deep sea. This ubiquitous presence of MP particles opens the possibility for their ingestion by nearly all species in the marine ecosystem. Reports have shown that MP particles are present in local commercial seafood species leading to the possible human ingestion of these particles. However, due to a lack of harmonized methods to identify microplastics (MPs), results from different studies and locations can hardly be compared. Hence, this study was aimed to detect, quantify, and estimate MP contamination in commercially important mussels originating from 12 different countries distributed worldwide. All mussels were obtained from supermarkets and were intended for human consumption. Using a combinatorial approach of focal plane array (FPA)-based micro- Fourier-transform infrared (FTIR) spectroscopy and micro-Raman spectroscopy allowed the detection and characterization of MP down to a size of 3 μm in the investigated mussels. Further, a gentle sample purification method based on enzymes has been modified in order to optimize the digestion of organic material in mussels. A random forest classification (RFC) approach, which allows a rapid discrimination between different polymer types and thus fast generation of data on MP abundance and size distributions with high accuracy, was implemented in the analytical pipeline for IR spectra. Additionally, for the first time we also applied a RFC approach for the automated characterization of Raman spectra of MPs.

Microplastics are ubiquitous in the marine environment but characterizing them in marine organisms is challenging. Herein we describe a method to detect, identify, and quantify microplastics in marine mussels (Mytilus edulis) using thermal gravimetric analysis – Fourier Transform infrared spectroscopy – gas chromatography mass spectrometry (TGA-FTIR-GC/MS) after extracting and isolating the microplastics using chemical digestion, density separation, and filtration. Combining the three instrumental techniques adds discriminatory power as temperature profiles, chromatograms, and vibrational and mass spectra differ among common plastics. First, we tested several digestion schemes after spiking the mussels with plastics commonly found in the marine environment, including polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyvinyl chloride (PVC). KOH (10%, w/v) was the most suitable reagent, providing good recoveries (>97%) without degrading the microplastics. We show that the technique TGA-FTIR-GC/MS can be optimized to readily determine both the type (polymer) and amount (mass) of microplastics in the sample. Applied to 100 mussels from each of six locations along the coast of China, we found an average of 0.58 mg of plastic per kg of tissue (range 0.16–1.71 mg/kg), with PE being the most abundant type of plastic measured. Among the coastal cities, mussels from Dalian had the highest microplastic content. Overall, we demonstrate that the method is a powerful technique to quantify masses of microplastics in marine mussels, a species commonly used as a bioindicator of pollution, and may be applied to other biota as well.

Microplastics represent an emerging environmental issue and have been found almost everywhere including seafood, raising a great concern about the ecological and human health risks they pose. This study addressed the common technical challenges in the assessment of microplastics in seafood by developing an improved protocol based on Raman spectroscopy and using the green-lipped mussel Perna viridis and the Japanese jack mackerel Trachurus japonicus as the test models. Our findings identified a type of stainless-steel filter membranes with minimal Raman interference, and a combination of chemicals that achieved 99–100% digestion efficiency for both organic and inorganic biomass. This combined chemical treatment reached 90–100% recovery rates for seven types of microplastics, on which the surface modification was considered negligible and did not affect the accuracy of polymer identification based on Raman spectra, which showed 94–99% similarity to corresponding untreated microplastics. The developed extraction method for microplastics was further combined with an automated Raman mapping approach, from which our results confirmed the presence of microplastics in P. viridis and T. japonicus collected from Hong Kong waters. Identified microplastics included polypropylene, polyethylene, polystyrene and poly(ethylene terephthalate), mainly in the form of fragments and fibres. Our protocol is applicable to other biological samples, and provides an improved alternative to streamline the workflow of microplastic analysis for routine monitoring purposes.

The industrial production of insects for waste management or as a protein source is becoming vital to our society. Large volumes of manure are produced by concentrated animal facilities around the globe that must be managed, utilized, and disposed of properly. Flies offer a partial solution with their abilities to reduce these wastes and heavy metal pollutants. Meat and crop proteins are being supplemented by insect proteins for many feeds across the globe, yet science-based studies behind the mass-rearing of insects are still in their infancy. In the current study, the percent change in the composition of nutrients, heavy metals, and fiber, in dairy, poultry, and swine manure degraded by either black soldier fly (BSF) or house fly (HF) larvae was explored. Pre-digested and post-digested manure samples were collected from four independent studies that differed in production scale (number of larvae and feeding regimen): 1) BSF small-scale (100 larvae fed incrementally), 2) HF small-scale (100 larvae fed incrementally), 3) BSF large-scale (10,000 larvae fed a single time), and 4) HF large-scale (4,000 larvae fed a single time). Results indicate that nitrogen is a key nutrient impacted by larval digestion of manure by both species, regardless of scale. However, scale significantly impacted reductions of other nutrients, as did the type of manure in which the insects were reared. Ultimately, this study demonstrated that manure type and rearing scale impact the ability of BSF and HF larvae to reduce nutrients and heavy metals in manure, and thus insect management procedures need to be congruent with production emphases of the insects for waste management or protein products. Failure to take scale into consideration could lead to inaccurate assumptions related to industrialized efforts on this topic.

Marine and freshwater plastic pollution is a challenging issue receiving large amounts of research and media attention. Yet, few studies have documented the impact of microplastic ingestion to aquatic organisms. In the Pacific Northwest, Chinook salmon are a culturally and commercially significant fish species. The presence of marine and freshwater microplastic pollution is well documented in Chinook salmon habitat, yet no research has investigated the impacts to salmon from microplastic ingestion. The majority of the marine microplastics found in the Salish Sea are microfibers, synthetic extruded polymers that come from commonly worn clothing. To understand the potential impacts of microfiber ingestion to fish, we ran a feeding experiment with juvenile Chinook salmon to determine if ingested fibers are retained or digestion rates altered over a 10 day digestion period. The experiment was completed in two trials, each consisted of 20 control and 20 treatment fish. Treatment fish were each fed an amended ration of 12 food pellets spiked with 20 polyester microfibers and control fish were fed the same ration without added microfibers. Fish were sampled at day 0, 3, 5, 7, and 10 to assess if fibers were retained in their gastrointestinal tract and to determine the rate of digestion. Fibers for the experiment came from washing a red polyester fleece jacket in a microfiber retention bag. Fibers had a mean length of 4.98 mm. Results showed fish were able to clear up to 94% of fed fibers over 10 days. Differences in mean gastrointestinal mass were not statistically significant at any sampled time between treatment and controls, suggesting that the ingestion of microfibers did not alter digestion rates. Further work is needed to understand if repeated exposures, expected in the environment, alter digestion or food assimilation for growth.

A limitation to recycling wood from construction and demolition (C&D) waste is contamination of metals from the inadvertent inclusion of preservative treated wood, in particular wood treated with chromated copper arsenate (CCA) and newer copper-based formulations. To minimize contamination many regions have developed best management practices (BMPs) for separating treated from untreated wood. The objective of this study was to evaluate the fraction of preservative treated wood in recycled C&D wood after the implementation of BMPs, using Florida as a case study. Methods involved collecting recycled C&D wood samples from throughout the state, measuring metals concentrations (As, Cu, and Cr) in the samples to compute the fraction of recycled wood treated with waterborne wood preservatives, and comparing measurements with those taken prior to the formalization of BMPs. Metals concentrations were measured using two methods, one based on traditional laboratory digestion methods and another using a more rapid hand-held X-ray Fluorescence (XRF) device in the field. The proportion of waterborne preservative-treated wood in recycled wood products has reduced significantly in the intervening 20 years (from 6% to 2.9%), and the fraction of CCA-treated wood has been reduced even further, to 1.4%. The remaining fraction of waterborne preservative-treated wood is comprised of new formulations of copper-based preservatives. This suggests that restrictions from the wood preservation industry and best management practices implemented at recycling facilities have been effective in reducing heavy metal contamination from pressure treated lumber in recycled wood products.