Nitrated aromatic compounds, the ubiquitous nitrogen-containing organic pollutants, impact the environment and organisms adversely. As industrial raw materials and intermediates, nitrated aromatic compounds and their aromatic precursors are widely employed in the industrial production activities. Nevertheless, their emission from industrial waste gases has so far not been studied extensively. In this study, the concentrations of 12 nitrated aromatic compounds in the particle and gas phases downwind of 16 factories encompassing eight industries (i.e., pharmaceutical, weaving and dyeing, herbicide, explosive, painting, phenolic resin, paper pulp and polystyrene foam industries), were determined by ultra-high-performance liquid chromatography-mass spectrometry. Their concentrations in the particle and gas phases from different factories ranged from 114.7 ± 63.5 to 296.6 ± 62.5 ng m⁻³ and 148.7 ± 7.4 to 309.8 ± 26.2 ng m⁻³, respectively, thus, exhibiting significantly high concentrations as compared to the background sites. Among the 12 detected species, 4-nitrophenol, 5-nitrosalicylic acid, 3-nitrosalicylic acid and 4-methyl-2,6-dinitrophenol were observed to be the predominant species, with total fractions up to 47.9–72.3% and 63.1–70.3% in the particle and gas phases, respectively. Their emission profiles with respect to the industrial activities exhibited large discrepancies as compared to the combustion sources, thus, indicating different formation mechanisms. The emission ratios of particulate nitrated aromatic compounds owing to the industrial activities were estimated between 0.5 ± 0.2 and 4.3 ± 1.5 ng μg⁻¹, which were higher than or comparable to those from various combustion sources. The findings from this study confirm the industrial emission to be an important source of nitrated aromatic compounds in the atmosphere. The substantial emissions of nitrated aromatic compounds from various industries reported in this study provide the fundamental basis for further emission estimation and pollution control.

Dyeing wastewaters are toxic and carcinogenic to both aquatic life and human beings. Adsorption technology, as a facile and effective method, has been extensively used for removing dyes from aqueous solutions for decades. Numerous researchers have attempted to seek or design alternative materials for dye adsorption. However, using various novel adsorbents to remove dyes has not been extensively reviewed before. In this review, the key advancement on the preparation and modification of novel adsorbents and their adsorption capacities for dyes removal under various conditions have been highlighted and discussed. Specific adsorption mechanisms and functionalization methods, particularly for increasing adsorption capacities are discussed for each adsorbent. This review article mainly includes (1) the categorization, side effects and removal technologies of dyes; (2) the characteristics, advantages and limitations of each sort of adsorbents; (3) the functionalization and modification methods and controlling mechanisms; and (4) discussion on the problems and future perspectives about adsorption technology from adsorbents aspects and practical application aspects.

A suite of eight polyhalogenated carbazole (PHCZ) congeners were detected in sediments of the Jiaozhou Bay wetland. 3,6-dichlorocarbazole (36-CCZ), and 3,6-dibromocarbazole (36-BCZ) were detected in all samples. The concentrations of ΣPHCZs ranged from 6.9 to 33.4 ng/g dry weight (dw). The recovery of surrogate standard ranged from 85 to 109%. Significant relationships were found between the concentrations of 36-CCZ and those of the other three detected compounds (36-BCZ, 36-ICZ, and 1368-BCZ). However, with regard to the other chemicals, only 1368-BCZ was related to 36-ICZ. The toxic equivalent (TEQ) was used to assess the relative toxicity of PHCZs, which ranged within 0.1–3.9 pg TEQ/g dw in sediment. The inventory of ΣPHCZs was 58.9 kg. These results indicate that PHCZs are widely distributed in the Jiaozhou wetland and the dyeing and finishing industries may be important contamination sources of PHCZs.

In the current pandemic scenario, sustainable green products particularly antiviral, antioxidant, and antibacterial in nature are gaining worldwide fame in almost every walk of life. Cassia obovata (C. obovata) has been valorized as a source of yellow natural dye for nylon dyeing. For the isolation of dye extracts and for surface tuning, nylon fabrics were treated with microwave rays up to 10 min. For getting new shades with good to excellent fastness characteristics, sustainable bio-mordants in comparison with chemical mordants have been used at 60 °C, 70 °C, and 80°C. It has been found that for getting effective colorant yield, acidic extract should be exposed to MW ray treatment up to 6 min, and for getting improved fastness rating, bio-mordants have given excellent color characteristics. Statistical optimization of dyeing variable shows that application of 40 mL of C. obovata acidic extract of RE of 6 pH containing 3 g/100 mL of salt when employed at 55 °C for 45 min has given excellent results onto irradiated nylon fabric (RNF). It is inferred that Cassia obovata has an excellent potential for coloration of surface-modified fabrics, where the application of low amount of bio-mordants under statistical optimized conditions has made process more ecological, economical, and sustainable.

The indigo blue dye is widely used in the textile industry, specifically in jeans dyeing, the effluents of which, rich in organic pollutants with recalcitrant characteristics, end up causing several environmental impacts, requiring efficient treatments. Several pieces of research have been conducted in search of effective treatment methods, among which is electrocoagulation. This treatment consists of an electrochemical process that generates its own coagulant by applying an electric current on metallic electrodes, bypassing the use of other chemical products. The purpose of this study was to evaluate the potential use of iron slag in the electrocoagulation of a synthetic effluent containing commercial indigo blue dye and the effluent from a textile factory. The quantified parameters were color, turbidity, pH, electrical conductivity, sludge generation, phenol removal, chemical oxygen demand (COD), and total organic carbon (TOC). The electrocoagulation treatment presented a good efficiency in removing the analyzed parameters, obtaining average removal in the synthetic effluent of 85% of color and 100% of phenol after 25 min of electrolysis. For the effluent from the textile factory, average reductions of 80% of color reaching 177.54 mg Pt CoL⁻¹, 91% of turbidity reaching 93.83 NTU (nephelometric turbidity unit), 100% of phenol, 55% of COD with a final concentration of 298.8 mg O₂ L⁻¹, and 73% of TOC with a final concentration of 56.21 mg L⁻¹, in 60 min of electrolysis. The reduced time for removal of color and phenolic compounds in synthetic effluent demonstrates the complexity of treating the real effluent since to obtain removals of the same order a 60-min period of electrolysis was necessary. The results obtained demonstrate the potential of using iron slag as an electrode in the electrocoagulation process in order to reuse industrial waste and reduce costs in the treatment and disposal of solid waste. Thus, the slag can be seen as an alternative material to be used in electrocoagulation processes for the treatment of effluents from the textile industry under the experimental conditions presented, its only limitation being the fact that it is a waste and therefore does not have a standardization in the amounts of iron present in the alternative electrodes.

The worldwide resurgence of natural dyes in all fields is due to the carcinogenic effects of effluent loads shed by synthetic industries. Coconut coir (Cocos nucifera) containing tannin as a source of natural colorants has been selected for coloration of bio-mordanted silk under the influence of ultrasonic radiations at various dyeing conditions. For extraction of tannin dye from cocos powder, different media were employed, and dyeing variables such as dyeing time, dye bath pH, dyeing bath temperature, and the effect of salts on dyeing were optimized. For achieving new shades with excellent color characteristics, bio-mordants in comparison with chemical mordants were employed. It has been found that acid-solubilized extract after ultrasonic treatment for 45 min has yielded high color strength, when coconut coir extract of 4 pH from 6g of cocos powder, containing 5g/100mL salt solution as exhaust agent, was used to dye silk at 75°C for 65 min. Among bio-mordants turmeric (K/S=13.828) and among chemical mordants iron has shown excellent results (K/S=2.0856). Physiochemical analysis of fabric before and after US treatment shows that there is no change in the chemical structure of the fabric. It is found that ultrasonic waves have excellent potential to isolate the colorant followed by dyeing and environmental friendly mordanting at optimal conditions, but also the usage of herbal-based plant anchors, i.e., bio-mordants, has made the natural dyeing process more sustainable and clean.

Revival of natural colorants in textile dyeing is one of the important strategies to reduce synthetic chemical-based environmental pollution. The study has been conducted to explore the coloring potential of durum (Triticum durum Desf.) and bread (Triticum astivum L.) wheat husk for fabric dyeing. The results showed that both wheat species husk could be an excellent source of natural dye, if extracted in alkaline medium. It has been observed that durum wheat husk based dye worked best at 70°C with a pH 11.0 and salt concentration of 8.0 g/100 ml of solution. Similarly, alkaline extract of bread wheat husk worked better at 80°C with dyeing solution pH 9.0 and salt concentration of 8.0 g/100 ml. Bio-mordanting experiments results revealed pomegranate rind (7%) as most effective bio-mordant to obtain high color strength of wheat husk treated fabric. In chemical-mordanting, tannic acid (5%) as pre-mordant and chrome (5%) as post-mordant have improved the color strength more than all other quantities of employed mordants. FTIR analysis indicated the presence of flavonoids as major colorant compounds in wheat husk–based natural dye. Suggested ISO standards for colorfastness illustrated good color strength ratings of husk-based dyed fabric when treated with bio-mordants as compared to chemical counterparts. Hence, husk of both bread and durum wheat species has great potential to be used as source of eco-friendly natural colorant for cotton dyeing.

Ecofriendly exploration of Arjun bark (Terminalia arjuna) is a herbal natural colorant for cotton dyeing. This is because the demand for natural dyes has been increased worldwide due to their therapeutic usage and other food, textiles, agriculture, engineering, and medical applications. Therefore, this study has been carried out due to the isolation of colorant from Arjun bark in an acidified methanolic medium after exposure to ultrasonic rays up to 60 min. Additionally, using bio-mordants, it has been found that the application of 10% of Zeera (Cuminum cyminum) extract as meta-bio-mordant, 3% of Ilaichi (Elettaria cardamomum) extract as meta-bio-mordant, and10 % of Harmal (Peganum harmala) and Neem (Azadirachta indica) extract as meta-bio-mordants has given excellent color strength. These bio-mordants have not only made the coloration process more eco-friendly, viable, and greener, but also improved color strength with various tonal effects from red to reddish brown shades. Thus, it has been found that ultrasonic treatment as an environment-friendly tool has not only enhanced the color strength of natural colorant isolated from Arjun bark onto the cotton fabric under mild conditions.

Fabric dyeing produces high amounts of wastewater containing organic and inorganic pollutants such as reactive dyes that are the most common textile dyes employed by the industry. Three vinylsulfonic reactive dyes, blue 19 (B-19), red 198 (R-198), and yellow 15 (Y-15), were removed from effluents of industrial-like dyeing processes employing three adsorbents: (1) magnetite nanoparticles (MNP), (2) yeast waste obtained after β-glucan removal from yeast biomass (YW), and (3) nanomagnetic composite produced from YW and MNP (YW-MNP). The non-linear kinetic pseudo-second-order and two-stage models best explained the experimental phenomena for the majority of adsorbate:adsorbent systems. The theoretical isotherm models were fitted to experimental isotherms obtained from experiments conducted with appropriated dilutions of effluents, which have a specific condition, limited by the maximum dye concentration established by the dye recipe. Thus, the saturation of adsorbents was not reached for all adsorbate:adsorbent systems. In this way, the best conditional sorption capacities (SCcₒₙd) were obtained by YW (1.7, 2.3, and 2.5 g/kg for B-19, R-198, and Y-15, respectively). The SIPS model best described all dyes adsorbed by YW, while the D-R model best described the phenomena for MNP and YW-MNP.

Environmentally friendly products are the need of the hour, particularly in this pandemic situation because synthetic products need such toxic chemicals for their formulation and finishing which are carcinogenic for the globe. The current study is the utilization of waste black tea leaf (BT)–based tannin brown natural colorant for silk dyeing using microwave treatment. Dye (tannin) has been isolated in various media before and after microwave treatment up to 6 min and applied at various conditions. It has been found that 30 mL of aqueous extract of 3.0 pH obtained from 6.0 g of powder containing 3.0 g/100 mL of salt as an exhausting agent after microwave treatment for 5 min, when employed at 55 °C for 45 min, has given good color yield onto silk. Iron (3%) and acacia extract (2%) as pre-chemical and bio mordant, iron (2%) and pomegranate extract (2%) as post chemical and bio-mordant, and Al (3 %) and pomegranate extract (3%) as meta chemical and bio-mordant have given new shades with good to excellent fastness ratings. It is inferred that waste black tea leaves (BTs) in an aqueous medium have an excellent potential to serve as a source of natural tannin brown dye for the coloration of surface-modified silk fabrics under the influence of cost, energy, and time-effective microwave treatment. Additionally, the utilization of a low amount of sustainable chemical and bio-mordants has valorized the dyeing of silk by developing soothing and sustainable shades with good fastness properties.