Affiner votre recherche
Résultats 1-10 de 12
Remediation of contaminated sediments containing both organic and inorganic chemicals using ultrasound and ozone nanobubbles
2021
Most river sediments are contaminated with organic and inorganic pollutants and cause significant environmental damage and health risks. This research is evaluated an in-situ sediment remediation method using ultrasound and ozone nanobubbles to remove organic and inorganic chemicals in contaminated sediments. Contaminated sediment is prepared by mixing synthetic fine sediment with an organic (p-terphenyl) and an inorganic chemical (chromium). The prepared contaminated sediment is treated with ultrasound and ozone nanobubbles under different operating conditions. For the samples with the maximum initial concentration of 4211 mg/kg Cr and 1875 mg/kg p-terphenyl, average removal efficiencies are 71% and 60%, respectively, with 240 min of sonication with 2-min pulses, whereas 97.5% and 91.5% removal efficiencies are obtained for the same, respectively, as a single contaminant in the sediment. For the same maximum concentrations, the highest removal of p-terphenyl is 82.7% with 127.2 J/ml high energy density, and for Cr, it is 77.1% using the highest number of the treatment cycle and ozone usage with 78.75/ml energy density. The Cr highest removal efficiency of 87.2% is recorded with the reduced initial concentration of 1227 mg/kg with the highest treatment cycles. The Cr removal efficiency depends on the availability of oxidizing agents and the number of washing cycles of sediments, whereas P-terphenyl degradation is most likely influenced by the combined effects of oxidation and ultrasound-assisted pyrolysis and combustion of organics.
Afficher plus [+] Moins [-]Marine pollution effects on the southern surf crab Ovalipes trimaculatus (Crustacea: Brachyura: Polybiidae) in Patagonia Argentina
2015
Lezcano, Aníbal Hernán | Rojas Quiroga, María Laura | Liberoff, Ana Laura | Van der Molen, Silvina
We compared the carapace shape and thickness as well as the energy density of Ovalipes trimaculatus inhabiting areas comprising a gradient of marine pollution: high, moderate and undetected, in the Nuevo gulf (Patagonia Argentina). The carapace shape was evaluated by means of individual asymmetry scores (=fluctuating asymmetry) whereas the carapace thickness was assessed by measuring the carapace dry weight. The energy density was analyzed through its negative relationship with water content in muscle tissue. The individual asymmetry scores as well as the percentage of water content in muscle tissue were proportional to the marine pollution gradient, whereas the carapaces thickness did not differ among sampling sites. Our results are consistent with previous findings and demonstrate the direct effect of marine pollution on other taxa different from gastropods, cephalopods and polyplacophora and add to long-standing concerns about detrimental effects caused by marine pollution on the benthic community of the Nuevo gulf.
Afficher plus [+] Moins [-]Carbon-based nano-filler in polymeric composites for supercapacitor electrode materials: a review
2021
Yibowei, Moses Ebiowei | Adekoya, Joseph Gbolahan | Adediran, Adeolu Adesoji | Adekomaya, Oludaisi
The concept of this paper was to explore the comparative advantage of polymer composite in the formation of a critical part of electrodes, separators, and electrolytes. These parts largely determine the overall performance of new evolving supercapacitors (SC) as against many other existing storage devices. Polymer materials are reputed for their low weight and life-cycle flexibility which makes supercapacitors unique in their functions. In this paper, application and classification of SCs were undertaken to take into consideration the peculiarities of polymer composite suitable for each class of SCs identified in this work. Part of the rationale of this review paper was to bridge the existing gap identified in many storage devices using salient properties inherent in light-weight materials. This paper also discussed the potential threats to SCs, which require further research works. It is expected that this paper would assist other researchers in evolving SCs devoid of low cell voltages, lower energy density, and reduction of production cost.
Afficher plus [+] Moins [-]Surfactant-Assisted Sono-breakage of Wastewater Particles for Improved UV Disinfection
2017
Torres-Palma, Ricardo A. | Gibson, John | Droppo, Ian G. | Seto, Peter | Farnood, Ramin
Ultraviolet (UV) disinfection of wastewater is adversely affected by the presence of particle-associated bacteria. Earlier studies have shown that disrupting these particles by ultrasonic cavitation can enhance the UV disinfection of wastewater. However, the use of ultrasound as a pretreatment technology for UV disinfection is hindered by its high energy demand. In this work, the addition of several organic solutes, including 1-propanol, 1-hexanol, and pentyl acetate, to promote the cavitation process and to improve the breakage of wastewater particles was examined. It was found that the enhancement in the cavitation and the breakage efficiency of particles was positively related to the hydrophobicity of surfactant. In addition, particle breakage was a function of the concentration of surfactant as well as the delivered ultrasound energy density. Sonication of wastewater samples containing small amounts of 1-hexanol (16 mM) or pentyl acetate (12 mM) increased the UV disinfection efficiency and decreased the required UV dose to achieve the disinfection target by a factor of more than 2.5.
Afficher plus [+] Moins [-]Effect of compacting conditions on the viscoelastic properties of banana leaf waste and briquette quality
2022
Sellin, Noeli | Prá, Flávio de Borba | Sapelini, Cristiano | Alves, José Luiz Francisco | Souza, Ozair | Marangoni, Cintia
This study evaluated the effects of the temperature and pressure used when compacting banana leaves on viscoelastic properties and briquette quality. Banana leaves with 12.4% of humidity were milled at two ranges of average particle size. The briquetting was carried out in a cylinder-piston device coupled to a universal mechanical test machine, under different compacting temperatures (30 and 120 °C) and pressures (20, 40 and 60 MPa). Several parameters, including compacting module, porosity index, final density, critical density, compacting energy, compression ratio, higher heating value, and energy density, were investigated. The banana leaf particles smaller than 1.7 mm performed better during compaction, with low compacting resistance. Temperature showed less influence on final density than pressure. The increase of pressure contributed to decreasing the compacting module and to achieving denser briquettes. It was not necessary to apply high temperature to obtain briquettes with high final density and energy density. The optimum briquetting process parameters identified can be used to produce briquettes from banana leaves at an industrial scale with an extruder. Briquetting adds value to banana leaf waste and reduces environmental pollution.
Afficher plus [+] Moins [-]Use of neural network and multivariate statistics in the assessment of pellets produced from the exploitation of agro-industrial residues
2022
Resende, Dieimes Ribeiro | da Silva Araujo, Elesandra | Lorenço, Mário Sérgio | Lira Zidanes, Uasmim | Akira Mori, Fábio | Fernando Trugilho, Paulo | Lúcia Bianchi, Maria
The production of pellets from residual biomass generated monocropping by Brazilian agribusiness is an environmentally and economically interesting alternative in view of the growing demand for clean, low-cost, and efficient energy. In this way, pellets were produced with sugarcane bagasse and coffee processing residues, in different proportions with charcoal fines, aiming to improve the energy properties and add value to the residual biomass. The pellets had their properties compared to the commercial quality standard. Artificial neural networks and multivariate statistical models were used to validate the best treatments for biofuel production. The obtained pellets presented the minimum characteristics required by DIN EN 14961–6. However, the sugarcane bagasse biomass distinguished itself for use in energy pellets, more specifically, the treatment with 20% of fine charcoal because of its higher net calorific value (17.85 MJ·kg⁻¹) and energy density (13.30 GJ·m⁻³), achieving the characteristics required for type A pellets in commercial standards. The statistical techniques were efficient and grouped the treatments with similar properties, as well as validated the sugarcane biomass mixed with charcoal fines for pellet production. Thus, these results demonstrate that waste charcoal fines mixed with agro-industrial biomass have great potential to integrate the production chain for energy generation.
Afficher plus [+] Moins [-]Wire-Tube DBD Reactor for H2S Treatment: Optimization of Materials and Configurations
2022
Xia, Chongjie | Shen, Xinjun | Gu, Jingxue | Zhou, Wei | Liu, Yinxin
Based on the wire-tube dielectric barrier discharge (DBD) reactor, this study investigated the effects of the materials and configurations of high-voltage pole, insulating medium layer and grounding pole on the discharge power, power factor, and ozone concentration of the reactor, respectively. The DBD reactor had the best discharge power and power factor and the highest ozone concentration when the high-voltage pole was the linear copper wire, the insulating medium material was quartz tube, and the grounding pole was the copper wire winding. Based on this optimized DBD reactor, the effect of energy density on the treatment efficiency and ozone concentration of H₂S exhaust gas was further investigated. At the energy density of 2143.1 J L⁻¹, the H₂S exhaust gas treatment efficiency reached 100% and the residual ozone concentration decreased to 0 g m⁻³.
Afficher plus [+] Moins [-]Effect of char addition on anaerobic digestion of animal by-products: evaluating biogas production and process performance
2020
Arenas, Cristian Bernabé | Meredith, William | Snape, Collin Edward | Gómez, Xiomar | González, José Francisco | Martinez, Elia Judith
The effect of char addition on the digestion of animal by-products was evaluated as a way for enhancing the performance of the process. Two different types of carbonaceous materials were tested as carbon conductive elements to improve biological treatment. One was derived from a torrefaction process intended for increasing the energy density of lignocellulosic biomass, and the other was obtained from a hydrothermal carbonisation process. In this research, batch digestion systems of animal waste samples were evaluated at a volatile solid (VS) ratio of 1:1 inoculum–substrate (where the content of the substrate in the system was 1.69 ± 0.2 g). The system reported a baseline methane yield of 380 L CH₄ kg VS⁻¹ which increased on average to 470 L CH₄ kg VS⁻¹ following to the addition of char. The presence of char allowed a faster degradation of the lipid and protein material, reducing inhibitory interactions. The use of Fourier transformed infrared spectroscopy was applied for elucidating the predetermination of the degradation process and bring an insight into the greater degradation potential attained when carbon materials are used for enhancing microbial performance.
Afficher plus [+] Moins [-]Pelletizing of lignocellulosic wastes as an environmentally friendly solution for the energy supply: insights on the properties of pellets from Brazilian biomasses
2021
Santana, Diego Abner Rodrigues | Scatolino, Mário Vanoli | Lima, Michael Douglas Roque | de Oliveira Barros Junior, Udson | Garcia, Dorival Pinheiro | Andrade, Carlos Rogério | de Cássia Oliveira Carneiro, Angélica | Trugilho, Paulo Fernando | de Paula Protásio, Thiago
In the context of the circular bioeconomy and cleaner production, the incorporation of the by-products of plant biomass production in the bioenergy chain is fundamental. However, lignocellulosic wastes have properties that hinder their use for the production of biofuels. This study aims to evaluate how blends of lignocellulosic wastes improve the physical, chemical, and mechanical quality of pellets destined to the industrial sector, and to identify the challenges associated with the use of agroforestry biomass as raw material for pelletizing. Pellets were produced from blends of soybean wastes, sorghum wastes, pine needles, rice powder, Eucalyptus sawdust, and charcoal fines. Additionally, pure pellets composed of soybean wastes, sugarcane bagasse, and pine wood were evaluated. The effect of biomass type on the energy density, ash content, net heating value, and ultimate analysis was significant. The pellets produced with soybean wastes presented high contents of N (3.5–4.9%) and ashes (16.4–26.7%), besides low mechanical durability (≤ 96%), hindering its commercialization for industrial purposes. Pellets with sugarcane bagasse presented N (1.5%), S (0.03%), ashes (5.6%), mechanical durability (96.6%), and net heating value (15.1 MJ kg⁻¹), suitable for industrial energy use in accordance with ISO 17225-6. The high N and ash contents and the low mechanical durability are the greatest challenges for the energy use of pellets produced from Brazilian agroforestry wastes.
Afficher plus [+] Moins [-]Superior “green” electrode materials for secondary batteries: through the footprint family indicators to analyze their environmental friendliness
2019
Wu, Haohui | Gong, Yuan | Yu, Yajuan | Huang, Kai | Wang, Lei
As secondary batteries are becoming the popular production of industry, especial for lithium ion batteries (LIBs), the degree of environmental friendliness will gather increasing attention to their products of the whole life cycle. The research combines the life cycle assessment (LCA) and footprint family definition to establish a framework to calculate the footprint family of secondary battery materials. Through the method, we calculated the values of carbon footprint, water footprint, and ecological footprint about this eight kinds of secondary cathode battery materials with Ni-MH, Li₁.₂Ni₀.₂Mn₀.₆O₂/C, LiNi₁/₃Co₁/₃Mn₁/₃O₂/C, LiNi₀.₈Co₀.₂O₂/C, LiFePO₄/C, LiFe₀.₉₈Mn₀.₀₂PO₄/C, FeF₃(H₂O)₃/C, and NaFePO₄/C. When comparing and analyzing their values in each footprint, it can summarize the evaluation method for some secondary batteries by footprint indicators and construct the evaluation system. Through the comprehensive evaluation of footprint family system, the NaFePO₄/C battery gets the best performance of three main footprints when combining 1 kg of cathode materials, while Ni-MH is opposite. Hence, among these eight batteries environmental impacts evaluation, the NaFePO₄/C battery is regarded as the superior “green” battery, albeit the current application is restricted because of the synthesis limitation on large scale and energy density of storage. In LIBs comparison, the FeF₃(H₂O)₃ material shows its characteristics of environmental friendliness, which is expected to be a greener battery material of LIB. In conventional LIBs, the iron-containing cathode materials show lower environmental burden than ternary cathode materials. We can reduce environmental impacts through developing new advanced materials and reducing the content of high sensitivity element in raw materials.
Afficher plus [+] Moins [-]