Fine particulate matter (PM2.5) have not only detrimental impacts on air quality but also acts as a source for a range of heavy metals that worsen the potential risks to public health. Notably, previous studies on PM2.5-bound heavy metals in Pakistan have primarily focused on individual cities. This study offers a comprehensive analysis of pollution characteristics related to PM2.5-bound heavy metals, including lead (Pb), cadmium (Cd), zinc (Zn), and nickel (Ni), in ten cities of Pakistan. Data was collected from a wide range of reliable sources spanning from 2013 to 2023. Additionally, the human health risk assessment methodology endorsed by the United States Environmental Protection Agency (US EPA) was employed to evaluate both carcinogenic and non-carcinogenic risks for adults (males and females) and children. Findings of the present study revealed that children faced a greater risk associated with PM2.5-bound heavy metals as compared to adults. Cadmium, zinc, and nickel were found as the top three contributors to the average non-carcinogenic risk, while lead, cadmium, and nickel showed the highest carcinogenic risks. Based on these findings, this study strongly recommend that the government should strengthen the management of industrial and vehicular emissions. Furthermore, there is an imperative need to establish a real-time monitoring system capable of tracking toxic heavy metal pollutants transported through the atmosphere. Additionally, policymakers should seriously contemplate regional collaborations with the goal of creating metropolitan initiatives for pollution control, thereby effectively addressing these paramount environmental and public health concerns.

In order to determine the mechanisms of the retention of 60Co, 85Sr and 134Cs in natural silica sand columns, desorption experiments were performed by changes of pH and ionic strength and by injection of natural organic matter (NOM). Injection of KCl (0.1 M) resulted in a high release of 60Co (60-100%) and 85Sr (72-100%) but a smaller release of 134Cs (31-66%). Only limited release of 60Co (66%) and 85Sr (71%) and no release of 134Cs were observed by injection of NOM. The different percentages of desorption were related to the chemical characteristics of the organic colloids previously retained in columns before the desorption step. The results evidenced different sorption processes on energetically heterogeneous surface sites. According to the initial conditions, the binding of the radionuclides to the solid phase resulted from weak and easily reversible sorption processes to strong association probably by inner sphere complexes. The rather weak release of 134Cs by KCl was attributed to the strong retention of 134Cs by clay coatings on the natural silica sand surfaces. © 2005 Elsevier Ltd. All rights reserved.

In the global COVID-19 epidemic, humans are faced with a new challenge. The concept of quarantine as a preventive measure has changed human activities in all aspects of life. This challenge has led to changes in the environment as well. The air quality index is one of the immediate concrete parameters. In this study, the actual potential of quarantine effects on the air quality index and related variables in Tehran, the capital of Iran, is assessed, where, first, the data on the pollutant reference concentration for all measuring stations in Tehran, from February 19 to April 19, from 2017 to 2020, are monitored and evaluated. This study investigated the hourly concentrations of six particulate matters (PM), including PM2.5, PM10, and air contaminants such as nitrogen dioxide (NO2), sulfur dioxide (SO2), ozone (O3), and carbon monoxide (CO). Changes in pollution rate during the study period can be due to reduced urban traffic, small industrial activities, and dust mites of urban and industrial origins. Although pollution has declined in most regions during the COVID-19 quarantine period, the PM2.5 rate has not decreased significantly, which might be of natural origins such as dust. Next, the air quality index for the stations is calculated, and then, the interpolation is made by evaluating the root mean square (RMS) of different models. The local and global Moran index indicates that the changes and the air quality index in the study area are clustered and have a high spatial autocorrelation. The results indicate that although the bad air quality is reduced due to quarantine, major changes are needed in urban management to provide favorable conditions. Contaminants can play a role in transmitting COVID-19 as a carrier of the virus. It is suggested that due to the rise in COVID-19 and temperature in Iran, in future studies, the effect of increased temperature on COVID-19 can be assessed. | peer reviewed

Chicken poultry industry produces a vast amount of feather waste and is often disposed into landfills, creating environmental pollution. Therefore, we explored the valorization of chicken feather waste into lipids and keratinous sludge biomass. This study demonstrates the successful utilization of keratinous sludge biomass as a unique precursor for the facile preparation of novel keratinous sludge biomass-derived carbon-based molybdenum oxide (KSC@MoO₃) nanocomposite material using two-step (hydrothermal and co-pyrolysis) processes. The surface morphology and electrochemical properties of as-prepared nanocomposite material were analyzed using HR-SEM, XRD, XPS, and cyclic voltammetric techniques. KSC@MoO₃ nanocomposite exhibited prominent electrocatalytic behavior to simultaneously determine hydroquinone (HQ) and catechol (CC) in environmental waters. The as-prepared electrochemical sensor showed excellent performance towards the detection of HQ and CC with broad concentration ranges between 0.5–176.5 μM (HQ and CC), and the detection limits achieved were 0.063 μM (HQ) and 0.059 μM (CC). Furthermore, the developed modified electrode has exhibited excellent stability and reproducibility and was also applied to analyze HQ and CC in environmental water samples. Results revealed that chicken feather waste valorization could result in sustainable biomass conversion into a high-value nanomaterial to develop a cost-effective electrochemical environmental monitoring sensor and lipids for biofuel.

Exposure of the general population to airborne metals remains poorly estimated despite the potential health risks. Passive moss biomonitoring can proxy air quality at fine resolution over large areas, mainly in rural areas. We adapted the technique to urban areas to develop fine concentration maps for several metals for Constances cohort's participants. We sampled Grimmia pulvinata in 77 and 51 cemeteries within ∼50 km of Paris and Lyon city centers, respectively. We developed land-use regression models for 14 metals including cadmium, lead, and antimony; potential predictors included the amount of urban, agricultural, forest, and water around cemeteries, population density, altitude, and distance to major roads. We used both kriging with external drift and land use regression followed by residual kriging when necessary to derive concentration maps (500 × 500 m) for each metal and region. Both approaches led to similar results. The most frequent predictors were the amount of urban, agricultural, or forest areas. Depending on the metal, the models explained part of the spatial variability, from 6% for vanadium in Lyon to 84% for antimony in Paris, but mostly between 20% and 60%, with better results for metals emitted by human activities. Moss biomonitoring in cemeteries proves efficient for obtaining airborne metal exposures in urban areas for the most common metals.

Eighty eight adult gardeners and their relatives volunteered to provide urine and blood samples for a human biomonitoring survey among users of one of the biggest allotment garden from Wallonia, showing high trace metal(oid) concentrations in soils. The purpose was to determine if environmental levels of lead (Pb), cadmium (Cd) and arsenic (As) led to concentrations of potential health concern in the study population. Blood and urine biomarkers were compared to reference and intervention cut-off values selected from the literature. The study population exhibited (i) moderately high blood lead levels with median value of 23.1 μg/L, (ii) high urinary concentrations of speciated As (inorganic arsenic and its metabolites) with a median value of 7.17 μg/g.cr., i.e. twice the median values usually observed in general populations, and (iii) very high Cd levels in urine with a median value of 1.23 μg/L, in the range of 95th-97.5th percentiles measured in general adult populations. Biomarker levels in the study population were also mostly above those measured in adults from local populations living on contaminated soils, as reported in the current literature. All biomarkers of Pb, Cd and As showed weak to strong statistically significant correlations, pointing towards a joint environmental source to these three contaminants as being at least partially responsible for the high exposure levels observed. Urine and blood biomarkers show statistically significant associations with variables related to individual characteristics (age, smoking status, …) and Pb domestic sources (Pb pipes, cosmetics, …) but involves also behavioral and consuming habits related to gardening activities on the contaminated allotment garden. At such levels, owing to co-exposure and additive effects of Cd, As and Pb regarding renal toxicity known from literature, the study strongly suggests that this population of gardeners is at risk with respect to chronic kidney diseases.

The Covid-19 outbreak had a critical impact on a massive amount of human activities as well as the global health system. On the other hand, the lockdown and related suspension of working activities reduced pollution emissions. The use of biomonitoring is an efficient and quite recent tool to assess environmental pollution through the analysis of a proper bioindicator, such as bees. This study set out to ascertain the impact of the Covid-19 pandemic lockdown on the environmental occurrence of eleven heavy metals in the Campania region (Italy) by analyzing bees and bee products. A further aim of this study was the assessment of the Honeybee Contamination Index (HCI) in three different areas of the Campania region and its comparison with other Italian areas to depict the current environmental pollutants levels of heavy metals. The results showed that the levels of heavy metals bioaccumulated by bees during the pandemic lockdown (T1) were statistically lower than the sampling times after Covid-19 restrictions and the resumption of some or all activities (T2 and T3). A comparable trend was observed in wax and pollen. However, bee, pollen, and wax showed higher levels of Cd and Hg in T1 than T2 and T3. The analysis of the HCI showed a low contamination level of the sampling sites for Cd and Pb, and an intermediate-high level as regards Ni and Cr. The biomonitoring study highlighted a decrease of heavy metals in the environmental compartments due to the intense pandemic restrictions. Therefore, Apis mellifera and other bee products remain a reliable and alternative tool for environmental pollution assessment.

Freshwater ecosystems are the main source of water for sustaining life on earth, and the biodiversity they support is the main source of valuable goods and services for human populations. Despite growing recognition of the impairment of freshwater ecosystems by micropollutant contamination, different conceptual and methodological considerations can newly be addressed to improve our understanding of the ecological impact into these ecosystems. Here, we originally combined in situ ecotoxicology and community ecology concepts to unveil the mechanisms structuring macroinvertebrate communities along a regional contamination gradient. The novelty of our study lies in the use of an innovative biomonitoring approach (measurement of metal contents in caged crustaceans) allowing to quantify and compare on a regional scale the levels of bioavailable metal contamination to which stream communities are exposed. We were hence able to identify 23 streams presenting a significant gradient of bioavailable metal contamination within the same catchment area in the South West of France, from which we also obtained data on the composition of resident macroinvertebrate communities. Analyses of structural and functional integrity of communities revealed an unexpected decoupling between taxonomic and functional diversity of communities in response to bioavailable metal contamination. We show that despite the negative impact of bioavailable metal contamination exposure on taxonomic diversity (with an average species loss of 17% in contaminated streams), functional diversity is maintained through a process of non-random species replacement by functional redundant species at the regional scale. Such unanticipated findings call for a deeper characterization of metal-tolerant communities’ ability to cope with environmental variability in multi-stressed ecosystems.

The waste-to-energy (WTE) incinerator plant located in the Turin area (Italy) started to recover energy from the combustion of municipal solid waste in 2013. A health surveillance program was implemented to evaluate the potential health effects on the population living near the plant. This program included a longitudinal biomonitoring to evaluate temporal changes of some environmental pollutants, including polycyclic aromatic hydrocarbons (PAHs), in residents living in areas near the Turin incinerator (exposed group, E) compared to those observed in subjects living far from the plant (not exposed group, NE). Ten monohydroxy-PAHs (OH-PAHs), consisting in the principal metabolites of naphthalene, fluorine, phenanthrene, and pyrene, were analyzed in urines collected from the E and NE subjects after one (T₁) and three years (T₂) of plant activity and compared with those determined in the same cohort established before the plant start-up (T₀). Spearman correlation analysis was undertaken to explore possible associations between OH-PAHs and personal characteristics, lifestyle variables, and dietary habits. A linear mixed model (LMM) approach was applied to determine temporal trends of OH-PAHs observed in the E and NE subjects and to evaluate possible differences in trend between the two groups. Temporal trends of OH-PAHs determined by LMM analysis demonstrated that, at all times, the E group had concentrations lower than those assessed in the NE group, all other conditions being equal. Moreover, no increase in OH-PAH concentrations was observed at T₁ and T₂ either in E or in NE group. Significant positive correlations were found between all OH-PAHs and smoking habits. Regarding variables associated to outdoor PAH exposure, residence near high traffic roads and daily time in traffic road was positively correlated with 1-hydroxynaphthalene and 1-hydroxypyrene, respectively. In conclusion, no impact of the WTE plant on exposure to PAHs was observed on the population living near the plant.

We aimed to explore the effects of mixtures of lead and various metals on blood pressure (BP) and the odds of pre-hypertension (systolic blood pressure (SBP) 120–139 mmHg, and/or diastolic blood pressure (DBP) 80–89 mmHg) and hypertension (SBP/DBP ≥140/90 mmHg) among Chinese adults in a cross-sectional study. This study included 11,037 adults aged 18 years or older from the 2017–2018 China National Human Biomonitoring. Average BP and 13 metals (lead, antimony, arsenic, cadmium, mercury, thallium, chromium, cobalt, molybdenum, manganese, nickel, selenium, and tin) in blood and urine were measured and lifestyle and demographic data were collected. Weighted multiple linear regressions were used to estimate associations of metals with BP in both single and multiple metal models. Weighted quantile sum (WQS) regression was performed to assess the relationship between metal mixture levels and BP. In the single metal model, after adjusting for potential confounding factors, the blood lead levels in the highest quartile were associated with the greater odds of both pre-hypertension (odds ratio (OR): 1.56, 95% CI: 1.22–1.99) and hypertension (OR:1.75, 95% CI: 1.28–2.40) when compared with the lowest quartile. We also found that blood arsenic levels were associated with increased odds of pre-hypertension (OR:1.31, 95% CI:1.00–1.74), while urinary molybdenum levels were associated with lower odds of hypertension (OR:0.68, 95% CI:0.50–0.93). No significant associations were found for the other 10 metals. WQS regression analysis showed that metal mixture levels in blood were significantly associated with higher SBP (β = 1.56, P < 0.05) and DBP (β = 1.56, P < 0.05), with the largest contributor being lead (49.9% and 66.8%, respectively). The finding suggests that exposure to mixtures of metals as measured in blood were positively associated with BP, and that lead exposure may play a critical role in hypertension development.