Phytases are a group of digestive enzymes which are commonly used as feed enzymes. These enzymes are used exogenously in the feeds of monogastric animals thereby it improves the digestibility of phosphorous and thus reduces the negative impact of inorganic P excretion on the environment. Even though these enzymes are widely distributed in many life forms, microorganisms are the most preferred and potential source of phytase. Despite the extensive availability of the phytase-producing microbial consortia, only a few microorganisms have been known to be exploited at industrial level. The high costs of the enzyme along with the incapability to survive high temperatures followed by the poor storage stability are noted to be the bottleneck in the commercialization of enzymes. For this reason, besides the conventional fermentation approaches, the applicability of cloning, expression studies and genetic engineering has been implemented for the past few years to accomplish the abovesaid benefits. The site-directed mutagenesis as well as knocking out have also validated their prominent role in microbe-based phytase production with enhanced levels. The present review provides detailed information on recent insights on the modification of phytases through heterologous expression and protein engineering to make thermostable and protease-resistant phytases.

The removal efficiency of antibiotic resistance genes (ARGs) is the biggest challenge for the treatment of erythromycin fermentation residue (EFR). In the current research, 0% (control), 10% (T1), and 30% (T2) spray-dried EFR were composted with bulking materials, consisting of cattle manure and maize straw, for 30 days. Environmental factors and bacterial community on the behaviors of ARGs were further investigated. Apart from the high levels of erythromycin, the electrical conductivities were also increased by 66.7% and 291.7% in the samples of T1 and T2, respectively. After 30 days of composting, total ARGs in the samples of control were decreased by 78.1%–91.2%, but those of T1 and T2 were increased 14.5–16.7- and 38.5–68.7-fold. ARGs related to ribosomal protection (erm) dominated the samples of T1 and T2 at D 13 and 30, especially that ermF accounted for more than 80% of the total ARGs. Furthermore, the results of bacterial community revealed that EFR promoted the growth of Proteobacteria and Bacteroidetes, but inhibited that of Actinobacteria, Verrucomicrobia and Chloroflexi. Network analysis revealed that the enriched ARGs had strong correlation with seven bacterial genera, including Halomonas, Oceanobacillus, and Alcaligenes, most of which are halotolerant. Above all, erythromycin combined with high salinity can have synergistic effect on the enrichment of ARGs and their hosts.

This paper for the first time synthesizes novel biodiesel experimentally using low-cost feedstocks of coconut oil, caustic soda, and fermented palm wine contaminated by microorganisms. The alkaline catalyzed transesterification method was used for biodiesel production with minimal glycerol. The produced biodiesel was biodegradable and effective in cleaning a shoreline oil spill experiment verified by our developed oil spill radial numerical simulator. For the first time, an adaptive neuro-fuzzy inference system (ANFIS) was hybridized with invasive weed optimization (IWO), imperialist competitive algorithm (ICA), and shuffled complex evolution (SCE-UA) to predict biodiesel yield (BY) using obtained Monte Carlo simulation datasets from the biodiesel experimental seed data. The test results indicated ANFIS-IWO (MSE = 0.0628) as the best model and also when compared to the benchmarked ANFIS genetic algorithm (MSE = 0.0639). Additionally, ANFIS-IWO (RMSE = 0.54705) was tested on another coconut biodiesel data in the literature and it outperformed both response surface methodology (RMSE = 0.72739) and artificial neural network (RMSE = 0.68615) models used. The hybridized models proved to be robust for biodiesel yield modeling in addition to the produced biodiesel serving as an environmentally acceptable and cost-effective alternative for shoreline bioremediation.

This study used biogas residue produced by anaerobic fermentation of food waste as the raw material in large-scale windrow composting. The effects of the addition of a microbial consortium on the physical and chemical properties and stability of composting of biogas residue were studied. The maturity of food waste biogas residue during composting was investigated by multivariate interaction of environmental, maturity, and nutrient parameters, using structural equation modeling (SEM). Results showed that the temperature of T2 compost with the microbial consortium increased more rapidly. The pH ranges of T1 (without the microbial consortium) and T2 were 8.75–9.15 and 8.42–9.27, respectively; the electrical conductivity (EC) ranges of T1 and T2 were 2.74–3.95 mS/cm and 2.81–3.85 mS/cm, respectively; the degradation rates of organic matter (OM) in T1 and T2 were 21.74% and 33.62%, respectively; and the total nitrogen (TN) ranges of T1 and T2 were 1.93–3.10% and 1.80–3.21%, respectively. By the end of composting, the germination indices (GI) of T1 and T2 were 20.57% and 64.24%, respectively. The total oxygen consumption after 4 days (AT₄) was 1.88 mg-O₂/g and 1.2 mg-O₂/g in T1 and T2, respectively. SEM of T1 showed that compost temperature and EC were important factors affecting compost maturity. These factors highly significantly affected OM, which in turn affected AT₄ of the biogas residue composting. SEM of T2 showed that compost temperature, pH, and EC affected OM, which in turn affected compost maturity. Temperature affected compost maturity by affecting AT₄ and GI. Principal component analysis (PCA) showed that the overall score of T2 was higher than that of T1, indicating that the addition of the microbial consortium was beneficial for industrial-scale composting of biogas residue produced by anaerobic digestion of food waste.

Mattress is among the main products of ectopic fermentation system (EFS); however, the research on the data of antimicrobial residues in the mattress of EFS and risk assessments of mattress have not been conducted. This study involved a scale survey to assess the levels and distributions of 54 antimicrobial residues, including 4 tetracyclines, 19 quinolones, 22 sulfonamides, 3 amphenicols, and 6 macrolides in mattress on 12 swine farms that use ectopic fermentation systems (EFS) in Zhejiang Province. A total of 25 antimicrobials were detected in mattress, and the total residue amount of antimicrobial in mattress samples of each farm was 0.77–28.2 g/T. Chlortetracycline had the highest contribution rate, and the residue amount of antimicrobial in mattress is not entirely determined by the start-up time of EFS but is related to the use of feed containing antimicrobial, medication habits, the level of mattress management, and maintenance methods of EFS. The risk assessments of antimicrobial in the mattress were carried out. The results show that the risk of using mattress of EFS for soil is low.

Agricultural and agro-industrial wastes (e.g., potato peel waste) are causing severe environmental problems. The processes of pretreatment, saccharification, and fermentation are the major obstacles in bioethanol production from wastes and must be overcome by efficient novel techniques. The effect of exposing the fungi (yeast) Saccharomyces cerevisiae to laser source with the addition of graphitic carbon nitride nanosheets (g-C₃N₄) with different concentrations on bioethanol production was investigated through the implementation of a batch anaerobic system and using potato peel waste (PPW). Dichromate test was implemented as quantitative analysis for quantification of the bioethanol yield. The benefits of this test were the appearance of green color indicating the identification of ethanol (C₂H₅OH) by bare eye and the ease to calculate the bioethanol yield through UV–visible spectrophotometry. The control sample (0.0 ppm of g-C₃N₄) showed only a 4% yield of bioethanol; however, by adding 150 ppm to PPW medium, 22.61% of ethanol was produced. Besides, laser irradiations (blue and red) as influencing parameters were studied with and without the addition of g-C₃N₄ nanomaterials aiming to increase the bioethanol. It was determined that the laser irradiation can trigger the bioethanol production (in case of red: 13.13% and in case of blue: 16.14% yields, respectively) compared to the control sample (in absence of g-C₃N₄). However, by adding different concentrations of g-C₃N₄ nanomaterials from 5 to 150 ppm, the bioethanol yield was increased as follows: in case of red: 56.11% and, in case of blue: 56.77%, respectively. It was found that using fungi and exposing it to the blue laser diode source having a wavelength of 450 nm and a power of 250 mW for a duration of 30 min with the addition of 150 mg L⁻¹ of g-C₃N₄ nanomaterials delivered the highest bioethanol yield from PPW.

Strategic valorization of readily available sugarcane bagasse (SB) is very important for waste management and sustainable biorefinery. Conventional SB pretreatment methods are ineffective to meet the requirement for industrial adaptation. Several past studies have highlighted different pretreatment procedures which are lacking environmentally benign characteristics and effective SB bioconversion. This article provides an in-depth review of a variety of environmentally acceptable thermochemical and biological pretreatment techniques for SB. Advancements in the conversion processes such as pyrolysis, liquefaction, gasification, cogeneration, lignin conversion, and cellulose conversion via fermentation processes are critically reviewed for the formation of an extensive array of industrially relevant products such as biofuels, bioelectricity, bioplastics, bio adsorbents, and organic acids. This article would provide comprehensive insights into several crucial aspects of thermochemical and biological conversion processes, including systematic perceptions and scientific developments for value-added products from SB valorization. Moreover, it would lead to determining efficient pretreatment and/or conversion processes for sustainable development of industrial-scale sugarcane-based biorefinery.

Lignocellulose degradation (LCD) was the key factor limiting the development of anaerobic fermentation (AF) by the cow dung (CD). In the research, the effects of cellulase pretreatment (CP) and microvoltage (MV) alone and combination on the gas production and LCD during the AF were investigated. The results showed that both CP and MV had an significant effect on the AF, though the synergistic reaction was more pronounced. The total biogas yield (TBY) could reach 11521 mL, and the highest methane production rate was 73% in the synergistic reactions, which was increased by 18.7% and 10.0% compared to CP and MV alone respectively. Meanwhile, the degradation rates of cellulose and lignin could be increased by 33.44% and 22.23%, respectively. The results of SEM, FT-IR and excitation emission matrix demonstrated that CP and MV played an important role in improving the fermentation efficiency. The microbial biomass change results indicated that the synergistic effect of CP and 0.8 V MV on the LCD was achieved by promoting the growth of lignocellulose-degrading bacteria. Moreover, the electricity could not only accelerate the movement of microorganisms and enzymes, but also promoted and enhanced the activity of enzymes, which provided an important reference for further development of the AF technology and the biogas industry.

In the face of the rapid increase of carbon emissions, climate warming, and an epidemic situation, low-carbon economy is attracting growing attention. Using bibliometric analysis and machine learning methods, the paper conducts a systematic review in the low-carbon economy. Using the Web of Science Core Collection database, 1433 articles from 1990 to 2021 were selected for review. We find that the trajectories of the low-carbon economy research can be divided into four phases: exploration, fermentation, rising, and flourishing. The low-carbon economy research can be categorized into five clusters: low-carbon energy policy, carbon footprint and carbon trading, energy–economy–environment system, energy efficiency and its decomposition, and carbon emission drivers. The findings of this review study shed light on the role and effects of low-carbon economic policies on energy futures.

Alkyl polyglycosides (APG), a biodegradable biosurfactant, have been widely used in environmental pollution control. However, the application of APG to enhance anaerobic dark fermentation of excess sludge (ES) and plant waste (PW) to improve hydrogen production has not been reported so far. In order to fill this gap, the effect of APG on hydrogen production from ES and PW was studied in mesophilic (30 °C) environment. The results showed that APG increased the yield of hydrogen, and the recommended dose was 0.15 g/g (calculated as volatile suspended solids), accompanied by 18.7 mL/g. The contribution of APG self-degradation to hydrogen can be ignored. Mechanism investigation revealed that APG promoted the dissolution, hydrolysis, and acidification of complex organic matter, and when the content of APG was 0.15 g/g, the concentration of dissolved chemical oxygen demand (COD) was as high as 3151 mg/L; however, the dissolved concentration of COD in the blank group was only 1548 mg/L. In addition, APG improved the output of volatile fatty acids (VFA). APG promoted the proportion of acetate and butyrate in VFA, which was conducive to hydrogen production. As for the process of methanogenesis, APG reduced the consumption of hydrogen and accumulates hydrogen. This work provides an alternative strategy for the recycling of organic waste and the enhanced generation of hydrogen.