Affiner votre recherche
Résultats 1-10 de 17
Highly sensitive GQDs-MnO2 based assay with turn-on fluorescence for monitoring cerebrospinal acetylcholinesterase fluctuation: A biomarker for organophosphorus pesticides poisoning and management
2017
Deng, Jingjing | Lu, Dingkun | Zhang, Xiaolei | Shi, Guoyue | Zhou, Tianshu
In this study, we demonstrated an assay with turn-on fluorescence for monitoring cerebrospinal acetylcholinesterase (AChE) fluctuation as a biomarker for organophosphorus pesticides (OPs) poisoning and management based on single layer MnO2 nanosheets with graphene quantum dots (GQDs) as signal readout. Initially, the fluorescence of GQDs was quenched by MnO2 nanosheets mainly due to the inner filter effect (IFE). However, with the presence of reductive thiocholine (TCh), the enzymatic product, hydrolyzed from acetylthiocholine (ATCh) by AChE, the redox reaction between MnO2 and TCh occurred, leading to the destruction of the MnO2 nanosheets, and thereby IFE was diminished gradually. As a consequence, the turn-on fluorescence of GQDs with the changes in the spectrum of the dispersion constituted a new mechanism for sensing of cerebrospinal AChE. With the method developed here, we could monitor cerebrospinal AChE fluctuation of rats exposed to OPs before and after therapy, and could thereby open up the pathway to a new sensing platform for better understanding the mechanism of brain dysfunctions associate with OPs poisoning.
Afficher plus [+] Moins [-]Colloidal properties and stability of aqueous suspensions of few-layer graphene: Importance of graphene concentration
2017
Su, Yu | Yang, Guoqing | Lu, Kun | Petersen, Elijah J. | Mao, Liang
Understanding the colloidal stability of graphene is essential for predicting its transport and ecological risks in aquatic environments. We investigated the agglomeration of ¹⁴C-labeled few-layer graphene (FLG) at concentrations spanning nearly four orders of magnitude (2 μg/L to 10 mg/L) using dynamic light scattering and sedimentation measurements. FLG agglomerates formed rapidly in deionized water at concentrations >3 mg/L. From 1 mg/L to 3 mg/L, salt-induced agglomeration was decreased with dilution of FLG suspensions; the critical coagulation concentration of the more concentrated suspension (3 mg/L) was significantly lower than the dilute suspension (1 mg/L) in the presence of NaCl (1.6 mmol/L and 10 mmol/L, respectively). In contrast, FLG underwent slow agglomeration and settling at concentrations ≤0.1 mg/L in NaCl solutions and ambient waters with low ionic strength (<10 mmol/L). FLG nanoparticles with smaller lateral sizes (25 nm–75 nm) were shown to agglomerate more slowly than larger FLG, and these small FLG particles exhibited greater bioaccumulation in zebrafish embryo and stronger chorion penetration ability than larger FLG particles. These findings suggest that FLG at more environmentally relevant concentration is relatively stable and may have implications for exposure of small FLG to ecological receptors.
Afficher plus [+] Moins [-]Nano-Particle-Mediated Wastewater Treatment: a Review
2017
Ghosh, Ankita | Nayak, Ashish Kumar | Pal, Anjali
Nowadays, due to increase in worldwide population and rapid urbanization, water demand in the region is increasing fast while water quality is deteriorating. The physical, chemical, and biological characteristics are changing in a fast way due to the accumulation of contaminants such as heavy metals, synthetic dyes, and organic and inorganic materials. This makes the water harmful for the biotic and abiotic components of the ecosystem. Various noble approaches have been employed by the researchers in order to replace the traditional wastewater treatment methods. In this regard, nano-technology has occupied a central position in the areas of research. The term “nano-technology” is a branch of science which acknowledges the manipulation of materials at nano-scale. These materials may have large specific surface area, high reactivity, degree of functionalization, size-dependent properties, etc., which make them suitable for execution in water purification and wastewater treatment. This paper briefly reviews the current advances and application of nano-materials for wastewater treatment. Here, various types of nano-materials such as carbon nano-tubes, MnO₂ nano-sheets, graphene composites, metal oxides, antimicrobial nano-materials, and photocatalysts, which are employed in the field of wastewater treatment, have been dissertated.
Afficher plus [+] Moins [-]Synthesis, Characterization, and Adsorption Properties of a Graphene Composite Sand (GCS) and Its Application in Remediation of Hg(II) Ions
2017
Bajpai, A.K. | Dubey, Renu | Bajpai, J.
In this study, graphene-based adsorbent was successfully prepared following a thermal treatment method. The prepared material, named as graphene-coated sand (GCS), was used as an adsorbent for the removal of Hg(II) ions from aqueous solutions. Structure, composition, and morphology of the GCS were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray diffractometer (XRD), Raman spectroscopy, electron diffraction (ED) measurements, energy dispersive X-ray spectroscopy (EDX), surface area measurements, particle size, and zeta potential measurements, respectively. A batch adsorption method was used to assess the ability of GCS towards removal of Hg(II) ions from aqueous solutions. The results of batch studies revealed that the GCS required a pH value 6.0, contact time 120 min, and adsorbent dose of 200 mg to attain adsorption equilibrium. Langmuir, Freundlich, Temkin, and D-R adsorption isotherm models were employed to evaluate the isotherm constants and other parameters related to the adsorption process. The Hg(II) ions uptake by the GCS was found to follow Freundlich isotherm model with R ² value of 0.97695, under optimized conditions and at 40 °C with a maximum adsorption capacity of 299.40 mg/g. The adsorption process followed the second-order kinetic path. The thermodynamic parameters such as ΔH°, ΔS°, and ΔG° were also calculated which suggested that the adsorption processes of Hg(II) ions onto the GCS was endothermic and entropy favored. The values of ΔG° at 283, 303, and 313 K were − 1.10, − 0.025, and − 4.55 kJ, respectively, and ΔH°, ΔS° were calculated to be 26.60 kJ mol⁻¹ and ΔS° 1.35 J mol⁻¹ K⁻¹, respectively. The obtained results revealed that the prepared materials could be effectively and economically beneficial.
Afficher plus [+] Moins [-]Removal of Dyes Using Graphene-Based Composites: a Review
2017
Khurana, Ishani | Saxena, Amit | Bharathi, | Khurana, Jitender M. | Rai, Pramod Kumar
Water contamination has reached an alarming state due to industrialization and urbanization and has become a worldwide issue. Dyes contaminate water and are addressed extensively by researchers. Various technologies and materials have been developed for the treatment of contaminated water. Among them, adsorption has attracted great attention due to its ease and cost-effective nature. In recent years, graphene-based composites have shown great potential for the removal of contaminants from water. The literature reveals the usefulness of composites of graphene with metal oxides, carbon derivatives, metal hybrids and polymers for the removal of organic dyes from contaminated water. In this review, efforts have been made to compile the studies on the removal of cationic and anionic dyes from water using graphene-based composites.
Afficher plus [+] Moins [-]Upgraded modified forms of bituminous coal for the removal of safranin-T dye from aqueous solution
2017
Shaban, Mohamed | Abukhadra, Mostafa R. | Shahien, Mohamed G. | Khan, Aftab Aslam Parwaz
Natural bituminous coal was used as a precursor in the synthesis of different modified products. The modification of coal was performed by treating it with nitric acid (N-coal), coating its surface by zinc oxide nanoparticles (Z-coal), and converting it into porous graphite (PG). The effect of modification processes on the structures, morphologies, and optical properties was followed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectrum (FT-IR), and UV/VIS spectrophotometer analysis. The surface of N-coal grains becomes smoother than the surface of raw coal grains due to the removal of the associated impurities and the formation of nitrogen function groups. For Z-coal, the whole surface of coal grains appears to be completely covered by agglomerated ZnO nanoparticles of massive density and irregular shapes. The average crystallite size of the formed ZnO is ~22.2 nm and density of dislocations is 2.029 × 10⁻³ dislocation/nm². Also, the removal of safranin-T dye by natural bituminous coal and its modified forms was investigated as a function of contact time, adsorbent mass, initial dye concentration, and pH value. At pH 8, the PG showed higher efficiency (96%) than Z-coal (93.5%), N-coal (74.5%), and natural coal (62%) after 2 h for 0.1 g on 100 mg/L dye. The obtained results are well fitted by pseudo-second-order kinetic than by intraparticle diffusion and Elovich kinetic models for the adsorption by N-coal, Z-coal, and PG, whereas the adsorption by raw coal is well fitted with both pseudo-second-order and Elovich kinetic models. The Langmuir isotherm model fits well the equilibrium adsorption isotherm of safranin by raw coal and its modified forms. The values of maximum adsorption capacity were calculated for raw coal, N-coal, Z-coal, and PG to be 21.3, 27.4, 32.46, and 33.67 mg/g, respectively. A monolayer model with one energy and a monolayer model with two energies as advanced equilibrium models were investigated for more physical interpretation of the adsorption process. The calculated parameters (number of adsorbed molecules per site and number of receptor sites per unit mass) reflected the role of modification processes in the adsorption behavior of safranin. Graphical abstract High volatile bituminous coal and its modified forms have been used for the removal of Safranin-T dye from aqueous solution.
Afficher plus [+] Moins [-]The ways of use of multilayered graphene in engineering ecology
2017
Makotchenko, Victor G. | Makotchenko, Eugenia V. | Pinakov, Dmitry V.
The applications of multilayered graphenes (MLGs), nanocomposites “MLG–decontaminant” and polydicarbonfluoride intercalation compounds for the localization and deactivation of toxic spills and gaseous emissions under technogenic accidents are investigated in this paper. The intercalation compounds contain oxidizers as intercalants, and MLGs are formed destructively by thermolysis of polydicarbonfluoride intercalation compounds. The sorptive capacity of MLGs (about 240 ml of liquid phase per 1 g of MLG) is much higher than in well-known expanded graphites (EGs) obtained from graphite oxide or graphite acid salts. Our investigation revealed the possibility of the production of the “MLG–decontaminant” nanocomposites with the neutralizator content >95% due to the extremely low (down to 0.4 g/l) apparent density of MLG and its high specific surface (about 370 m²/g). The use of these nanocomposites for the acid–base or redox neutralization of contaminants does not result in the overheating, sputtering or evaporation of liquid phases, because their neutralization products sorb into MLGs. It prevents the soil mineralization by liquid or solid deactivated spills. We revealed that polydicarbonfluoride intercalation compounds with oxidizers (ClF₃, HNO₃, N₂O₄) can be efficiently used for the deactivation of spills and gaseous emissions of nitrogen-containing base compounds.
Afficher plus [+] Moins [-]Dye removal of AR27 with enhanced degradation and power generation in a microbial fuel cell using bioanode of treated clinoptilolite-modified graphite felt
2017
Kardi, Seyedeh Nazanin | Ibrahim, Norahim | Najafpour-Darzi, Ghasem | Rashid, Noor Aini Abdul | Villaseñor, José
This work studied the performance of a laboratory-scale microbial fuel cell (MFC) using a bioanode that consisted of treated clinoptilolite fine powder coated onto graphite felt (TC-MGF). The results were compared with another similar MFC that used a bare graphite felt (BGF) bioanode. The anode surfaces provided active sites for the adhesion of the bacterial consortium (NAR-2) and the biodegradation of mono azo dye C.I. Acid Red 27. As a result, bioelectricity was generated in both MFCs. A 98% decolourisation rate was achieved using the TC-MGF bioanode under a fed-batch operation mode. Maximum power densities for BGF and TC-MGF bioanodes were 458.8 ± 5.0 and 940.3 ± 4.2 mW m⁻², respectively. GC-MS analyses showed that the dye was readily degraded in the presence of the TC-MGF bioanode. The MFC using the TC-MGF bioanode showed a stable biofilm with no biomass leached out for more than 300 h operation. In general, MFC performance was substantially improved by the fabricated TC-MGF bioanode. It was also found that the TC-MGF bioanode with the stable biofilm presented the nature of exopolysaccharide (EPS) structure, which is suitable for the biodegradation of the azo dye. In fact, the EPS facilitated the shuttling of electrons to the bioanode for the generation of bioelectricity.
Afficher plus [+] Moins [-]Preparation of transition metal composite graphite felt cathode for efficient heterogeneous electro-Fenton process
2017
A composite graphite felt (GF) modified with transition metal was fabricated and used as cathode in heterogeneous electro-Fenton (EF) for methyl orange (MO) degradation. Characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), the morphology and surface physicochemical properties of the cathodes after modification were observed considerably changed. After loading metals, the current response became higher, the accumulation of H₂O₂ and the degradation efficiency of MO were improved. Under the same conditions, GF-Co had the highest catalytic activity for electro-reduction of O₂ to H₂O₂ and MO degradation. At pH 3, 99 % of MO degradation efficiency was obtained using GF-Co after 120 min treatment and even at initial pH 9, 82 % of that was obtained. TOC removal efficiency reached 93.8 % using GF-Co at pH 3 after 120 min treatment while that was 12.3 % using GF. After ten-time runs, the mineralization ratio of the GF-Co was still 89.5 %, suggesting that GF-Co was very promising for wastewater treatment. The addition of isopropanol proved that ·OH played an important role in degradation of MO.
Afficher plus [+] Moins [-]Removal of tetracycline and oxytetracycline from water by magnetic Fe3O4@graphene
2017
Zhang, Yan | Jiao, Zhe | Hu, Yongyou | Lv, Sihao | Fan, Hongbo | Zeng, Yanyan | Hu, Jun | Wang, Mianmian
In this paper, Fe₃O₄@graphene (Fe₃O₄@G) magnetic nanocomposite was prepared via in situ precipitation method for the removal of oxytetracycline (OTC) and tetracycline (TC) from aqueous solution. The properties of the prepared nanocomposite were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and magnetic property measurement system (MPMS). Adsorption isotherm and kinetics of OTC and TC were studied in batch experiments. The influence of the dosage of Fe₃O₄@G, the solution pH, and ion strength on the adsorption process were also assessed. The results demonstrated that the Langmuir model fitted the adsorption equilibrium data better than did the Freundlich model, and the pseudo-first-order model was more suitable than the pseudo-second-order to describe the adsorption process, with a good adsorption rate constant (k = 0.974 and 0.834 g mg⁻¹ h⁻¹, respectively). The adsorption ability reached maximum at pH of 7 with no NaCl. The removal efficiency of Fe₃O₄@G in lake, tap, and pool water were 95.45, 96.68, and 89.82 % for OTC and 98.77, 98.23, and 89.09 % for TC, respectively. The π-π interaction and cation-π bonding of the adsorbent and analytes make it suitable for the removal of OTC and TC. The present study suggests that the prepared composite can be deemed as a promising material for the removal of tetracycline antibiotics from aqueous solution.
Afficher plus [+] Moins [-]