Affiner votre recherche
Résultats 1-10 de 106
Palm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics
2015
Abuh, Noah | Umoh, Akaninyene
Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were added. The properties of the wall panels were determined from cast specimen sizes of 100x 100 x 40 mm for density, moisture content and water absorption; 160 x 40 x 40mm for compressive strength, and 650 x 100 x 25 mm for bending strength. The specimens were cured in water and tested at ages of 3, 7, 14, 21, and 28 days. The results of density of the wall panels were within the range of 1634–1742 kg/m3, while the moisture content range of 3.30–8.45%, and the water absorption varies from 5 to 12%. The compressive strengths were found within the range of 1.92–5.20N/mm2 and, generally, decreases with the increasing percentage of fiber contents, but increased with curing age. The bending strength falls within the range of 2.04–4.13 N/mm2that increases with curing age and slightly increased with fiber content. It is concluded that oil palm fiber reinforced gypsum-cement wall panels are suitable as wall element.
Afficher plus [+] Moins [-]Tracing riverine sulfate source in an agricultural watershed: Constraints from stable isotopes
2021
Liu, Jinke | Han, Guilin
The sulfate pollution in water environment gains more and more concerns in recent years. The discharge of domestic, municipal, and industrial wastewaters increases the riverine sulfate concentrations, which may cause local health and ecological problems. To better understand the sources of sulfate, this study collected water samples in a typical agricultural watershed in East Thailand. The source apportionment of sulfide was conducted by using stable isotopes and receptor models. The δ³⁴SSO₄ value of river water varied from 1.2‰ to 16.4‰, with a median value of 8.9‰. The hydrochemical data indicated that the chemical compositions of Mun river water were affected by the anthropogenic inputs and natural processes such as halite dissolution, carbonate, and silicate weathering. The positive matrix factorization (PMF) model was not suitable to trace source of riverine sulfate, because the meaning of the extracted factors seems to be vague. Based on the elemental ratio and isotopic composition, the inverse model yielded the relative contribution of sulfide oxidation (approximately 46.5%), anthropogenic input (approximately 41.5%), and gypsum dissolution (approximately 12%) to sulfate in Mun river water. This study indicates that the selection of models for source apportionment should be careful. The large contribution of anthropogenic inputs calls an urgent concern of the Thai government to establish effective management strategies in the Mun River basin.
Afficher plus [+] Moins [-]Numerical analysis and modeling of two-loop experimental setup for measurements of radon diffusion rate through building and insulation materials
2020
Szajerski, Piotr | Zimny, Arkadiusz
Radon is a natural radioactive gas present in the environment, which is considered as the second most important lung cancer cause worldwide. Currently, radon gas is under focus and was classified as contaminant of emerging concern, which is responsible for serious biological/health effects in human. In presented work we propose the numerical model and analysis method for radon diffusion rate measurements and radon transport parameters determination. The experimental setup for radon diffusion was built in a classical, two chamber configuration, in which the radon source and outlet reservoirs are separated by the sample being tested. The main difference with previously known systems is utilization of only one radon detector, what was achieved by a careful characterization of the Rn-222 source and development of a numerical model, which allows for exact determination of radon transport parameters by fitting simulated radon concentration profile in the outlet reservoir to experimental data. For verification of the developed system, several insulation materials commonly used in building industry and civil engineering, as well as, common building materials (gypsum, hardened cement paste, concrete) were tested for radon diffusion rate through these barriers. The results of radon transmittance, permeability and diffusion coefficients for investigated materials are in compliance with values known previously from the literature. The analysis method is fast and efficient, and requires measurement period varying from a dozen or so hours up to 2–3 days depending on material properties. The described method is entirely based on a numerical analysis of the proposed differential equation model using freely available SCILAB software and experimental data obtained during sample measurements.
Afficher plus [+] Moins [-]A potential source for PM2.5: Analysis of fine particle generation mechanism in Wet Flue Gas Desulfurization System by modeling drying and breakage of slurry droplet
2019
Jiang, Binfan | Xie, Yulei | Xia, Dehong | Liu, Xiangjun
Aerosol particulate matter with dynamic diameter smaller than 2.5 μm (PM₂.₅) is the main cause for haze pollution in China. As a dominant precursor of PM₂.₅, SO₂ emitted from industrial process is now strictly controlled by using limestone/gypsum Wet Flue Gas Desulfurization (WFGD) system in China. However, a phenomenon that fine particle derived from WFGD is recently addressed, and is suggested to be a potential source of primary PM₂.₅. Herein, a first investigation into the particle generation mechanism in WFGD system is conducted with a novel droplet (containing particles) drying and breakage model. The proposed model considers a random and porous crust instead of the previous regular crust assumption, and is verified by comparing the modeling results with measurements. An orthogonal test with four factors and three levels is carried out through modeling calculation, and flue gas temperature (Tg) in the inlet is found to be a governing parameter for PM₂.₅ yields in WFGD. With Tg in range of 120–160 °C, PM₂.₅ yields in desulfurizing tower can reach a maximum value at ∼2 × 10⁸ cm⁻³ under typical WFGD condition. To avoid this situation and reduce the PM₂.₅ generation, Tg is suggested to be lower than 120 °C. Additionally, a new insight of the elimination effect of gas-gas heater (GGH) on “gypsum rain” in WFGD system is provided.
Afficher plus [+] Moins [-]Microstructural characteristics of naturally formed hardpan capping sulfidic copper-lead-zinc tailings
2018
Liu, Yunjia | Wu, Songlin | Nguyen, Tuan A.H. | Southam, Gordon | Chan, Ting-Shan | Lu, Ying-Rui | Huang, Longbin
A massive and dense textured layer (ca. 35–50 cm thick) of hardpan was uncovered at the top layer, which capped the unweathered sulfidic Cu-Pb-Zn tailings in depth and physically supported gravelly soil root zones sustaining native vegetation for more than a decade. For the purpose of understanding functional roles of the hardpan layer in the cover profile, the present study has characterized the microstructures of the hardpan profile at different depth compared with the tailings underneath the hardpans. A suit of microspectroscopic technologies was deployed to examine the hardpan samples, including field emission-scanning electron microscopy coupled with energy dispersive spectroscopy (FE-SEM-EDS), X-ray diffraction (XRD) and synchrotron-based X-ray absorption fine structure spectroscopy (XAFS). The XRD and Fe K-edge XAFS analysis revealed that pyrite in the tailings had been largely oxidised, while goethite and ferrihydrite had extensively accumulated in the hardpan. The percentage of Fe-phyllosilicates (e.g., biotite and illite) decreased within the hardpan profile compared to the unweathered tailings beneath the hardpan. The FE-SEM-EDS analysis showed that the fine-grained Ca-sulfate (possibly gypsum) evaporites appeared as platelet-shaped that deposited around pyrite, dolomite, and crystalline gypsum particles, while Fe-Si gels exhibited a needle-like texture that aggregated minerals together and produced contiguous coating on pyrite surfaces. These microstructural findings suggest that the weathering of pyrite and Fe-phyllosilicates coupled with dolomite dissolution may have contributed to the formation of Ca-sulfate/gypsum evaporites and Fe-Si gels. These findings have among the first to uncover the microstructure of hardpan formed at the top layer of sulfidic Cu-Pb-Zn tailings, which physically capped the unweathered tailings in depth and supported root zones and native vegetation under semi-arid climatic conditions.
Afficher plus [+] Moins [-]Diverse mechanisms drive fluoride enrichment in groundwater in two neighboring sites in northern China
2018
Li, Danni | Gao, Xubo | Wang, Yanxin | Luo, Wenting
Excessive amounts of fluoride in drinking groundwater are harmful to human health, but the mechanisms responsible for fluoride enrichment in groundwater are not fully understood. Samples from two neighboring areas with endemic fluorosis were collected to test the hypothesis that there are distinctly different mechanisms responsible for the enrichment of fluoride in these groundwater. Hydrochemistry, stable isotopes and geochemical simulation were conducted together to investigate the fluoride spatial distribution and the diversity of responsible mechanisms. Our results showed that the spatial distributions of fluoride are different: I) high [F] in fresh shallow groundwater (SGQJ) and II) medium [F] in fresh to brackish deep groundwater (DGQJ) in the Qiji area; and III) medium [F] in brackish shallow groundwater (SGYH) and IV) low [F] in fresh deep groundwater (DGYH) in the Yanhu area. We also found that the fluoride concentration in groundwater is primarily controlled by the dissolution equilibrium of fluorite, as suggested by the correlation between [F] and [Ca]. However, there are other significant mechanisms: 1) for SGQJ, fluoride-bearing minerals (such as fluorite) dissolution, along with moderate evaporation, cation exchange and the more alkaline conditions are the driving factors; 2) for SGYH, the contributing factors are strong evaporation, the salt effect, dissolution of evaporites, gypsum and dolomite, bicarbonate-fluoride competition and anthropogenic activity; 3) for DGQJ, cation exchange, alkaline conditions and competitive adsorption are major factors; and 4) dolomite dissolution promotes the [F] increase in DGYH. Our findings suggest that the hydrogeochemical conditions play key roles in the enrichment of fluoride and that caution should be taken in the future when evaluating fluoride occurrence in groundwater, even in nearby areas.
Afficher plus [+] Moins [-]Study on emission of hazardous trace elements in a 350 MW coal-fired power plant. Part 2. arsenic, chromium, barium, manganese, lead
2017
Zhao, Shilin | Duan, Yufeng | Chen, Lei | Li, Yaning | Yao, Ting | Lichuanjushi, | Liu, Meng | Lu, Jianhong
Hazardous Trace elements (HTEs) emitted from coal combustion has raised widespread concern. Studies on the emission characteristics of five HTEs, namely arsenic (As), chromium (Cr), barium (Ba), manganese (Mn), lead (Pb) at three different loads (100%, 83%, 71% output) and different coal types were performed on a 350 MW coal-fired power plant equipped with SCR, ESP + FF, and WFGD. HTEs in the flue gas at the inlet/outlet of each air pollution control device (APCD) were sampled simultaneously based on US EPA Method 29. During flue gas HTEs sampling, coal, bottom ash, fly ash captured by ESP + FF, fresh desulfurization slurry, desulfurization wastewater were also collected. Results show that mass balance rate for the system and each APCD is in an acceptable range. The five studied HTEs mainly distribute in bottom and ESP + FF ash. ESP + FF have high removal efficiency of 99.75–99.95%. WFGD can remove part of HTEs further. Total removal rate across the APCDs ranges from 99.84 to 99.99%. Concentration of HTEs emitted to atmosphere is within the extremely low scope of 0.11–4.93 μg/m3. Emission factor of the five studied HTEs is 0.04–1.54 g/1012J. Content of As, Pb, Ba, Cr in solid samples follows the order of ESP + FF ash > bottom ash > gypsum. More focus should be placed on Mn in desulfuration wastewater, content of which is more than the standard value. This work is meaningful for the prediction and removal of HTEs emitted from coal-fired power plants.
Afficher plus [+] Moins [-]The impact of gypsum mine water: A case study on morphology and DNA integrity in the freshwater invertebrate, Gammarus balcanicus
2014
Ternjej, Ivančica | Mihaljević, Zlatko | Ivković, Marija | Previšić, Ana | Stanković, Igor | Maldini, Krešimir | Želježić, Davor | Kopjar, Nevenka
The aim of our study was to investigate how exposure to heavy metal-rich waters from gypsum mining affects the morphology and levels of primary DNA damage in Gammarus balcanicus. Chemical analysis revealed increased concentrations of metals in water and sediment collected at a site impacted by gypsum mine wastewaters. The specimens also showed elevated total tissue metal levels when compared with the organisms collected at the reference site. The most prominent increase was observed for strontium, followed by iron, nickel, vanadium, aluminium, and manganese. The major pathway of entry for these toxic substances was through the degraded exoskeleton as a consequence of excessive strontium input (unbalanced calcium/strontium ratio) and altered permeability. Disturbed exoskeleton integrity was observed only in individuals collected downstream of the gypsum mine, which was confirmed by electron microscopy. Levels of primary DNA damage were evaluated using the alkaline comet assay in the haemolymph of the specimens.
Afficher plus [+] Moins [-]Influence of arbuscular mycorrhizal fungi on the growth and nutrient status of bermudagrass grown in alkaline bauxite processing residue
2011
Giridhar Babu, A. | Sudhakara Reddy, M.
A nursery experiment was conducted to evaluate the potential role of arbuscular mycorrhizal (AM) fungi in encouraging the vegetation cover on bauxite residue (red mud) sites. An alkali tolerant bermudagrass (Cynodon dactylon) adapted to local conditions were grown in red mud with different amendments with and without AM fungi to assess mycorrhizal effects on plant growth, mineral nutrition, metal uptake and neutralization of bauxite residue. Inoculation of AM fungi significantly increased the plant growth, nutrient uptake and reduced Fe, Al accumulation in plant tissue and also improved the soil physico-chemical and biochemical properties. Gypsum and sludge amended treatments inoculated with AM fungi had maximum biomass, nutrient uptake and reduced accumulation of metals. The neutralization of red mud was significant in presence of AM fungi than control. The experiment provided evidence for the potential use of bermudagrass in combination with AM fungi for ecological restoration of bauxite residue sites.
Afficher plus [+] Moins [-]Simultaneous immobilization of the cadmium, lead and arsenic in paddy soils amended with titanium gypsum
2020
Zhai, Weiwei | Dai, Yuxia | Zhao, Wenliang | Yuan, Honghong | Qiu, Dongsheng | Chen, Jingpan | Gustave, Williamson | Maguffin, Scott Charles | Chen, Zheng | Liu, Xingmei | Tang, Xianjin | Xu, Jianming
In situ immobilization of heavy metals in contaminated soils using industrial by-products is an attractive remediation technique. In this work, titanium gypsum (TG) was applied at two levels (TG-L: 0.15% and TG-H: 0.30%) to simultaneously reduce the uptake of cadmium (Cd), lead (Pb) and arsenic (As) in rice grown in heavy metal contaminated paddy soils. The results showed that the addition of TG significantly decreased the pH and dissolved organic carbon (DOC) in the bulk soil. TG addition significantly improved the rice plants growth and reduced the bioavailability of Cd, Pb and As. Particularly, bioavailable Cd, Pb and As decreased by 35.2%, 38.1% and 38.0% in TG-H treatment during the tillering stage, respectively. Moreover, TG application significantly reduced the accumulation of Cd, Pb and As in brown rice. Real-time PCR analysis demonstrated that the relative abundance of sulfate-reducing bacteria increased with the TG application, but not for the iron-reducing bacteria. In addition, 16S rRNA sequencing analysis revealed that the relative abundances of heavy metal-resistant bacteria such as Bacillus, Sulfuritalea, Clostridium, Sulfuricella, Geobacter, Nocardioides and Sulfuricurvum at the genus level significantly increased with the TG addition. In conclusion, the present study implied that TG is a potential and effective amendment to immobilize metal(loid)s in soil and thereby reduce the exposure risk of metal(loid)s associated with rice consumption.
Afficher plus [+] Moins [-]