An investigation into the pollution of stormwater runoff from automobile workshops in Nigeria was performed. Also, multivariate regression was used to predict the pH, oil, and grease (O&G) as well as the electrical conductivity (EC) in relation to the characteristics of the solids and metals pollutants of the untreated automobile workshop stormwater. The results indicated that automobile workshops contributed notable amounts of pollutants to stormwater runoff. Results were compared with Nigerian and USEPA standards. It was found that most of the parameters had mean value ranges far greater than standard limits. The multivariate regression showed variations in the results obtained from different automobile workshops. These variations could be due to the influence of factors such as the volume of automobile servicing activities and the waste generated from these activities that flow in the stormwater runoff. However, the bulk of the EC and pH of the stormwater were associated with the concentrations of the total dissolved solids and copper while the bulk of the O&G concentration was associated with the concentrations of lead and cadmium. It is recommended to treat automobile workshop stormwater to prevent detrimental effects in aquatic systems. Future research is aimed at modeling such treatment using multivariate regression techniques is warranted.

Heavy metals that are discharged through industrial and agricultural activities cause contamination, especially to the water sources, and bring about negative impacts on the flora and fauna in the ecosystem. The monitoring of heavy metals in the environment requires high technical skills with sophisticated equipment and is also time-consuming. In this study, the potential of using natural photosynthetic microorganism consortiums collected from natural water bodies as bioindicators for the screening of heavy metals was explored. The photosynthetic microorganism consortiums were first cultured in lab, immobilized, and then exposed to different heavy metals (Cd, Cu, Ni and Co) at different concentrations (0.01 mg.L-1, 0.05 mg.L-1, 0.10 mg.L-1, 0.50 mg.L-1, 1.00 mg.L-1 and 5.00 mg.L-1). The fluorometric responses before and after the exposure to heavy metals were measured. The results revealed that consortium cells responded to a wide range of heavy metals within a short period of exposure. The responses showed that the consortium cells can detect the presence of Cd, Cu, Ni, and Co within the range of 0.05-5.00 mg.L-1. The study confirmed that the photosynthetic microorganism consortiums collected from natural water bodies could be used as bioindicators for the screening of heavy metals.

Heavy metal pollution from the increased use of sewage effluent for irrigation is posing a hazard to agricultural ecosystems. Thus, a reliable and simple method of reducing the impact of heavy metals on plant growth is required. In the present study, cyanobacterial species were isolated from the sewage water irrigated soil of Rohtak city, Haryana, India, and characterized by various biochemical parameters. The cyanobacterial filtrates were then used to analyze their effects on the growth performance of rice seedlings under various concentrations of sewage wastewater. The results revealed a statistically significant increase in biomass, photosynthetic pigments, nitrate reductase activity, plumule, and radical length of rice seedlings by application of cyanobacterial filtrates. The antioxidant system (peroxidase enzyme and catalase enzyme activity) was also found to be stimulated. As compared to introduced species, the extracts of isolated species had a more favorable, statistically significant effect on rice seedlings. Our study indicated that these isolates have a high tolerance against heavy metals and are potentially useful as biofertilizers for the crops in sewage water irrigated agroecosystems.

The in-lab incubation experiments were conducted to identify the passivation effect of corn vinasse biochar, which was prepared at different temperatures, on heavy metal Pb in paddy soil of the Pb-Zn mining area. The results showed that after 30 days of biochar amended to the soil, the soil pH and organic carbon content increased by 2.72%-8.47% and 27.79%-65.26%, respectively. The CO32- and OH- contained in corn vinasse biochar could react with Pb and generate carbonate and hydroxide of Pb. In comparison with the treatment control, the bioavailable fractions of Pb were reduced by 26.6%, 23.30%, 26.95%, and 35.33%, respectively, in biochar-amended treatments. Exchangeable fractions of Pb decreased by 21.50%, 21.33%, 22.58%, and 22.58% for the treatment 3% (300°C), 6% (300°C), 3% (600°C), and 6% (300°C) corn vinasse biochar, respectively, compared with the treatment control. As a whole, corn vinasse biochar could effectively promote the transformation of Pb in soil from the exchangeable fractions into the Fe-Mn oxide-bound fractions and residue fractions, with a significant passivation effect for Pb in soil and more effective passivation by high-temperature preparation and increased dosage of biochar.

Regional geochemical mapping was carried out in Bilaspur and Korba Districts of Chhattisgarh, and stream sediments/slope wash, soil, and water samples were analyzed for concentration of heavy metals. The study contributes to understanding heavy metals contamination of sediments, soils, and water due to anthropogenic activity, mainly in agriculture-based rural areas. The study reveals that high geochemical anomalies observed for heavy metals like Ni, Cr, As, and Zn in sediments and soil samples are due to the extensive uses of phosphatic fertilizer and soil amendments in the form of poultry and swine manure. Water quality assessment of major streams in the study areas shows that the water is suitable for domestic and agricultural uses. Correlation analysis reveals that the chemical weathering of rock-forming minerals doesn’t control the surface water chemistry of the study area and is also an anthropogenic source of sodium in water. This study also shows the importance of the country’s geochemical mapping database, which will have much broader applications than conventional mineral exploration and geological mapping.

The heavy metal speciation analysis in sediments helps us understand and evaluate essential and unavoidable issues in terms of both health and environmental hazards imposed by these metals in our lives. Analyzing the total content of heavy metals enables us to understand only the quantity of the contaminants. To understand the different species or the chemical forms of heavy metals available in the sediments, we must study their speciation. Speciation studies help us determine their possible sources as well as their environmental stability in terms of availability to plants and other organisms. The heavy metals in this study were specified using four-stage sequential extraction, also known as the BCR technique. This study mainly highlights the quantification of metal contamination of Cu, Zn, Pb, Ni, Cd & Cr, and chemical forms as species in sediment samples collected from different Pune District, Maharashtra sites. Heavy metal contamination from the collected samples was analyzed with the use of flame atomic absorption spectrometry. This study indicated that Zn and Ni are among the most abundant metals in the sediment samples; however, Cu and Cd belong to the least abundant category. The oxidizable and residual forms (immobile and cannot be used by the organisms readily) appeared dominant for most heavy metals. Very significant differences were observed in the speciation of heavy metals from sample to sample, which was probably due to differences in water/soil composition and the agrochemicals like pesticides, weedicides, and fertilizers used in agricultural practices; the wastewater generated from different pharmaceuticals, chemical processing and manufacturing industries as well as the improper wastewater treatment methods.

Studies have emphasized that the presence of heavy metals in freshwater fish represents a global public health issue. Nigeria, being a developing nation with less emphasis on the quality of seafood consumed by the residents, ranks this study very vital. The policy implication of this study is the advancement of a healthy population in contemporary Nigeria. Hence, this study assessed heavy metal concentration in two fish species, Clarias gariepinus (Catfish) and Oreochromis niloticus (Nile Tilapia), in the Anambra River. The sample included twenty fishes, of which eighteen were collected from the three sampling locations (the fish ports of Anambra River), namely Otu-nsugbe, Otuocha, and Ikemivite) while two control samples were collected from a pond about 200 m away from the river. The levels of heavy metals were determined using Varian AA 240 atomic absorption spectrophotometer (AAS). The results showed that the concentrations of heavy metals (cadmium and arsenic) in the sampled fishes from Anambra River exceeded the joint World Health Organization and Food and Agriculture Organization (FAO/WHO) standard for fish and fish product consumption, while the concentration of chromium, mercury, and lead are within the permissible limit. The study also showed the distribution of the heavy metals in the fish organ varies among fish species. Heavy metals occur higher in Clarias garepinus than in Oreochromis niloticus, while tissue preference for heavy metal accumulation is in the order of gill > liver > muscle. It was recorded from this study that the heavy metal concentration in the fish from the pond is generally higher than the fish from the river for some metals. The high level of heavy metals in the sampled fish was attributed to heavy metals contamination of the river as a result of various anthropogenic activities such as mining, burning of fossil fuel and emission from the exhaust of boats/vehicles, overuse of fertilizers and pesticides, discharge of effluent, sewage, and hospital waste. This study concluded that long-term consumption of fish from the river may pose health risks to the consumers due to the possible bioaccumulation of heavy metals, especially cadmium and arsenic. It was recommended that continuous monitoring of heavy metal levels in the fish and water, public awareness, and appropriate legislative provisions should be put in place to ensure that harvested fish and fish products may be safe for human consumption.

Digested sludge wasted by tanneries is rich in nutrients and trace elements however, the presence of toxic metals restricts their use in agriculture. The present study explores the possible application of tannery sludge amendment for the cultivation of an energy crop, Hibiscus cannabinus. The toxicity of various sludge amendments (25, 50, 75, and 100%, w/w) was examined during early seedling growth, followed by metal accumulation potential by performing pot experiments. Chemical characterization revealed the presence of Cr (709.6), Cu (366.43), Ni (74.6), Cd (132.71), Pb (454.8) μg.g-1 in tannery sludge beside N (2.1%), P 3.8 & K 316.96 (kg.hec-1.) respectively. Germination of H. cannabinus exposed to sludge extracts ranged between 80 to 95%; Relative seed germination, 81.33 to 84.43%. Relative root growth, 0.9 to 1.16 cm; and germination index, 95 to 110%. It was found that sludge extracts have not caused adverse effects on seed germination and early seedling growth. Heavy metal accumulation was observed as follows: Ni (3.37, 2.38, 1.46 & 0.90 mg.kg-1) > Pb (10.59, 10.15, 5.26, & 2.84 mg.kg-1) > Cu (2.34, 2.24, 0.97 & 0.24 mg.kg-1) > Cd (2.31, 1.19, 1.33 & 1.12 mg.kg-1) > Cr (1458, 1136.12, 601.73 & 211.6 mg.kg-1) in 100, 75, 50, & 25% sludge amended soil, respectively. The bio-concentration pattern of metals was found to be in the order of root > leaf > stem. The findings of the present study give direction for the eco-friendly and cost-effective management of tannery sludge. Further, H. cannabinus can be used for the restoration of metal-contaminated agricultural land, however, results need to be corroborated with field trials.

The stabilization of toxic metals in the stable matrices is quite well-known. Research on copper and cadmium stabilization in the CaO-CuO-SiO2 and CaO-CdO-SiO2 composites was conducted to study the characteristics of CaO-CuO-SiO2 and CaO-CdO-SiO2 composites as well as the Cu and Cd metals stabilization in the hydrated composites. The composites of CaO-CuO-SiO2 and CaO-CdO-SiO2 were synthesized by the solid-state reaction method. A stoichiometric amount of CaO, SiO2, Cu(NO3)2, and CdO were calcined at 1050°C for 4 hours. The synthesized compounds were further hydrated in a soaking time of 30, 60, and 90 days. The hydration produced calcium silicate hydrate that can stabilize metals. The Cu and Cd stability in CaO-CuO-SiO2 and CaO-CdO-SiO2, respectively, were tested using the Toxicity Leaching Procedure (TCLP) method. The hydrated and hydrated composite characterizations were performed using X-ray diffraction (XRD), Fourier Transform Infra-Red Spectrophotometer (FTIR), and Scanning Energy Mocroscopy-Energy Dispersive X-ray analyzer (SEM-EDX) and the Atomic Absorption Spectroscopy (AAS) methods. The composites mainly consist of Ca3SiO5, Ca2SiO4, Ca(OH)2, SiO2, and metal oxide of CuO, Cu2O, and CdO. The composites were able to stabilize ~100% of the heavy metals of Cu and Cd.

The rapid development of industry has led to the generation of a large amount of electroplating wastewater. The direct discharge of untreated electroplating wastewater may lead to the formation of toxic metal-organic complexes, which is a challenging problem for human health and the living environment of organisms. Due to the high solubility of heavy metals in aquatic environments and their easy absorption by organisms, effective treatment of electroplating wastewater is of great significance. The ultimate goal of electroplating wastewater treatment should be to recover metals and water from electroplating wastewater. In indoor experiments, pilot tests, and industrial applications of electroplating wastewater treatment, membrane treatment technology commonly used in wastewater terminal treatment has attracted great attention. Membrane treatment technology seems to be the most promising method for removing heavy metals and organic pollutants from electroplating wastewater. This article reviews the membrane treatment technologies for electroplating wastewater, introduces the advantages and disadvantages of various membranes in the treatment of electroplating wastewater, the removal efficiency of pollutant types, and their comparison. The focus is on the treatment effects of nano-filtration membrane, ultra-filtration membrane, micro-filtration membrane, reverse osmosis membrane, ceramic membrane, biofilm, etc., on electroplating wastewater. Compared with a single treatment method, the combination of different processes shows higher efficiency in removing various pollutants.