Proteomics technology is an attractive biomarker candidate discovery tool that can be applied to study large sets of biological molecules. To identify novel biomarkers and molecular targets in arsenic-induced skin lesions, we have determined the protein profile of arsenic-affected human epidermal stratum corneum by shotgun proteomics. Samples of palm and foot sole from healthy subjects were analyzed, demonstrating similar protein patterns in palm and sole. Samples were collected from the palms of subjects with arsenic keratosis (lesional and adjacent non-lesional samples) and arsenic-exposed subjects without lesions (normal). Samples from non-exposed healthy individuals served as controls. We found that three proteins in arsenic-exposed lesional epidermis were consistently distinguishably expressed from the unaffected epidermis. One of these proteins, the cadherin-like transmembrane glycoprotein, desmoglein 1 (DSG1) was suppressed. Down-regulation of DSG1 may lead to reduced cell-cell adhesion, resulting in abnormal epidermal differentiation. The expression of keratin 6c (KRT6C) and fatty acid binding protein 5 (FABP5) were significantly increased. FABP5 is an intracellular lipid chaperone that plays an essential role in fatty acid metabolism in human skin. This raises a possibility that overexpression of FABP5 may affect the proliferation or differentiation of keratinocytes by altering lipid metabolism. KRT6C is a constituent of the cytoskeleton that maintains epidermal integrity and cohesion. Abnormal expression of KRT6C may affect its structural role in the epidermis. Our findings suggest an important approach for future studies of arsenic-mediated toxicity and skin cancer, where certain proteins may represent useful biomarkers of early diagnoses in high-risk populations and hopefully new treatment targets. Further studies are required to understand the biological role of these markers in skin pathogenesis from arsenic exposure.

Wetland snakes, as top predators, are becoming globally recognised as bioindicators of wetland contamination. Livers are the traditional test organ for contaminant exposure in organisms, but research is moving towards a preference for non-lethal tissue sampling. Snake scales can be used as an indicator of exposure, as many metals bind to the keratin. We used laser ablation with inductively coupled plasma-atomic emission spectroscopy and mass spectrometry (LA-ICP-MS) to quantify the concentrations of 19 metals and metalloids (collectively referred to ‘metals’ hereafter) in Western tiger snake (Notechis scutatus occidentalis) scales from four wetlands along an urban gradient, and compared them to concentrations measured in captive tiger snake scales. We conducted repeat measures to determine the concentration accuracy of each metal using LA-ICP-MS. Concentrations in wild Western tiger snake scales were significantly higher than in reference tiger snake scales for most metals analysed, suggesting accumulation from environmental exposure. We compared the scale concentrations to sediment concentrations of sampled wetlands, and found inter-site differences between mean concentrations of metals in scales parallel patterns recorded from sediment. Four metals (Mn, As, Se, Sb) had strong positive correlations with liver tissue contents suggesting scale concentrations can be used to infer internal concentrations. By screening for a larger suite of metals than we could using traditional digestive methods, we identified additional metals (Ti, V, Sr, Cs, Tl, Th, U) that may be accumulating to levels of concern in tiger snakes in Perth, Western Australia. This research has progressed the use of LA-ICP-MS for quantifying a suite of metals available in snake scales, and highlights the significance of using wetland snake scales as a non-lethal indicator of environmental contamination.

Environmental exposure to arsenic is a major public health challenge worldwide. In detailing the hallmark signs of chronic arsenic exposure, previous studies have shown that epigenetic and immune dysfunction are associated with arsenic-induced skin lesions; however, knowledge regarding interactions between the mechanisms listed above is limited. In this study, a total of 106 skin samples were collected over the past 20 years. Based on the presence or absence of high arsenic exposure, the participants were divided into arsenic exposure (72) and reference (34) groups. Additionally, the arsenic exposure group was further divided into the non-cancer group (31, including skin hyperpigmentation and hyperkeratosis) and the skin cancer group (41, including Bowen’s disease, basal cell carcinoma and squamous cell carcinoma) according to a skin histopathological examination. First, the associations among miR-155, NF-AT1 with immunological dysfunction and arsenic-induced skin lesions and carcinogenesis were confirmed using these skin samples. In the arsenic-exposed group, miR-155–5p, keratin 1(Krt1), keratin 10 (Krt10), and keratin 6c (Krt6c) were significantly increased in the skin (p < 0.05), while NF-AT1, interleukin-2 (IL-2), and interferon-γ (IFN-γ) were significantly decreased (p < 0.05). Clear correlations were observed among these factors (p < 0.05). In immortalized human keratinocytes, silencing and overexpression of NF-AT1 could alter the expression and secretion of immunological dysfunction indicators (IL-2 and IFN-γ) that are induced by arsenic exposure (p < 0.05); however, miR-155–5p levels did not change significantly (p > 0.05). The miR-155–5p mimic and inhibitor could regulate the NF-AT1-mediated immunological dysfunction caused by arsenic (p < 0.05). Our study provides some limited evidence that miR-155–5p regulates the NF-AT1-mediated immunological dysfunction that is involved in the pathogenesis and carcinogenesis of arsenic. The second major finding was that Krt1 and Krt10 are markers of hyperkeratosis caused by arsenic, and Krt6c is a potential biomarker that can reflect arsenic carcinogenesis.

Toxic elements (arsenic, cadmium, lead, mercury, selenium, thallium) are a group of contaminants that are known to elicit developmental, reproductive, general health, and immune system effects in reptiles, even at low concentrations. Reptiles, including marine turtles, are susceptible to accumulation of toxic elements due to their long life span, low metabolic rate, and highly efficient conversion of prey into biomass. The objectives of this study were to (1) document concentrations of arsenic, cadmium, lead, mercury, selenium, and thallium in whole blood and keratin from nesting loggerhead sea turtles (Caretta caretta) from Casey Key, Florida and document correlations thereof and (2) correlate whole blood toxic element concentrations to various hematological and plasma biochemistry analytes. Baselines for various hematological and plasma analytes and toxic elements in whole blood and keratin (i.e., scute) in nesting loggerheads are documented. Various correlations between the toxic elements and hematological and plasma biochemistry analytes were identified; however, the most intriguing were negative correlations between arsenic, cadmium, lead, and selenium with and α- and γ-globulins. Although various extrinsic and intrinsic variables such as dietary and feeding changes in nesting loggerheads need to be considered, this finding may suggest a link to altered humoral immunity. This study documents a suite of health variables of nesting loggerheads in correlation to contaminants and identifies the potential of toxic elements to impact the overall health of nesting turtles, thus presenting important implications for the conservation and management of this species.

Mercury (Hg) concentrations are a concern in the Canadian Arctic, because they are relatively high compared to background levels and to similar species farther south, and are increasing in many wildlife species. Among marine birds breeding in the Canadian Arctic, Hg concentrations have been monitored regularly in eggs and intermittently in livers, but feathers have generally not been used as an indicator of Hg exposure or burden. We examined Hg concentrations in six marine bird species in the Canadian Arctic. Ivory gull Pagophila eburnea, feather Hg was exceptionally high, while glaucous gull Larus hyperboreus feather Hg was unexpectedly low, and ratios of feather THg to egg THg varied across species. The proportion of total Hg that was comprised of methyl Hg in ivory gull feathers was lower than in other species, and may be related to photo-demethylation or keratin breakdown in semi-opaque feather tissue.

Feathers, burdensome waste from the poultry industry, can be a cheap source of keratin, a protein with excellent physicochemical, biological, and mechanical properties. Acid and alkaline hydrolyses are usually adopted for isolation of keratin from its natural resources. This study aimed at assessing the statistically significant effect of input variables in the alkaline hydrolysis of keratin from chicken feathers on the process yield and on the molecular weight of peptides obtained. The effect of the volume ratio of 1M NaOH to the feathers’ mass, the hydrolysis time, and the shaking speed of the reaction mixture on the process yield were analyzed. The use of statistical analysis at the design step of experiment allowed reducing the trial number from 27 to 9. Among the input variables analyzed, only the volume ratio of 1M NaOH to the feathers’ mass had a significant effect on the process yield, while none of them significantly affected the molecular weight of the peptides obtained. All hydrolysates were dominated by two peptides’ fractions, with molecular weights of ca. 130 and 250 kDa, and mixture of many peptides of weight close to 10 kDa and smaller. Alkaline hydrolysis of feather keratin yielded protein hydrolysates soluble over a wide pH range.

Keratin/cellulose cryogels were successfully fabricated using chicken feathers (CF) and cardboard (C) from environmental waste for the first time, to be exploited in oil/solvent absorption. The keratin/cellulose-based composites were obtained by combining the dissolution of CF and C waste in 1-butyl-3-methylimidazolium chloride (Bmim⁻Cl⁺) ionic liquid green solvent via regeneration, simply by the freeze-drying method. The characterization analysis of the synthesized keratin/cellulose-based composites was performed using Fourier transform infrared spectrometry, X-ray diffractometry, scanning electron microscopy, and thermogravimetry. The as-prepared cryogel can absorb various oils and organic solvents. Moreover, its sorption capacity can reach up to 6.9–17.7 times the weight of the initial cryogel. This kind of CF/C cryogel revealed good and fast absorption efficiency. It could also be reused by simple absorption/distillation and absorption/desorption methods. Through the kinetic analysis, it was found that the pseudo-second-order model was more appropriate for the keratin/cellulose cryogel oil absorption process. Besides, owing to its low cost, good absorption capacity, and excellent reusability, this cryogel has potential for spill cleanup of oils and organic solvents.

Although water occupies 75% of the earth’s surface, only 0.0067% of the total water is available for human activities. These statistics further decline with the population growth and consequent multiplication in the amount of annual waste produced. The demand for clean and safe drinking water has always been a prime concern in the global scenario. Among various types of waste materials, endocrine-disrupting chemicals (EDCs) and pharmaceutical effluents have become a constant threat to the aquatic ecosystem and possess challenges worldwide. Endocrine-disrupting chemicals (EDCs) are a mixed group of emerging concern chemicals with the ability to mimic the mechanisms of biosynthesis, transport, and metabolism of hormones. These chemicals pose various health threats such as early puberty, infertility, obesity, diabetes, reproductive disorders, cancerous tumors, and related disorders (immune cells, hormones’ activity, and various organs). On the other hand, pharmaceutical compounds such as antibiotics also harm the natural environment, human health, and soil microbiology. Their low concentration, ranging from a few ng/L to μg/L, gives rise to a micro-pollution phenomenon, which makes it difficult to detect, analyze, and degrade in wastewater treatment plants. Activated carbons (ACs) and other adsorbents, including naturally occurring materials (wood, keratin) are considered as nanomaterials (NMs) reference for the separation of organic pollutants. It is generally acknowledged that mass-transfer phenomena control sorption kinetics at the liquid/solid interface, with retention controlled by the sorbent/sorbate properties. Therefore, the type of interaction (strong or weak van der Waals forces) and the hydrophilic/hydrophobic properties of the adsorbent are two crucial factors. Besides, EDCs and pharmaceutical compound sorption on such kinds of nanoporous solids depend on both the molecule size and charge density. The applications of nanomaterials on non-conservative methods, like advanced oxidation processes or AOPs (e.g., photocatalysis and Fenton reaction), are contemplated as more apt in comparison to conservative technology like reverse osmosis nanofiltration, and adsorption, etc. One of the reasons is that AOPs generate free radicals (hydroxyls), which are strong oxidants for the demineralization of organic compounds and the extreme case that hydroxyl radicals can attack any kinds of pollutants with the generation of only water and carbon dioxide as final products. AOPs may imply the use of NMs as either catalysts or photocatalysts, which improve the selective removal of the target pollutant. Therefore, various literature reviews have revealed that there is a timely need to upgrade the efficiency of the remediation approaches to protect the environment against EDCs and pharmaceuticals adequately. There is currently a lack of definitive risk assessment tools due to their complicated detection and associated insufficiency in the health risk database. Hence, our present review focuses on applying carbon-based nanomaterials to remove EDCs and pharmaceuticals from aqueous systems. The paper covers the effect of these pollutants and photocatalytic methods for treating these compounds in wastewater, along with their limitations and challenges, plausible solutions, and prospects of such techniques.

Dyes from industrial wastewaters represent one of the most hazardous pollutants as they are not effectively biodegradable. The present work is focused to study the novel properties of keratin-polyamide blend nanofibrous filtration membranes for treating wastewaters containing dye. Keratin protein was extracted from goat hair, a tannery waste through sulphitolysis process. The extracted keratin was blended with polyamide to prepare a nanofibrous membrane through the electrospinning process. The fabricated pristine polyamide and keratin-altered polyamide membranes were characterized and compared for their properties. Effects of solution pH, dye concentration, membrane flux, and membrane capacity have been examined. Very fine nanofibers and enhanced porosity drive the membrane to enhanced flux and higher filtration efficiencies. At pH 2, the dye removal efficiency of the blend membranes was 100, 99, 98, 90, and 83% for 100, 200, 250, 300, and 400 ppm concentrations of dye, respectively. The keratin–polyamide blend membrane exhibited better properties in all aspects. The results of this present investigation indicate that the presence of keratin in filtration membranes is promising for dye removal from the effluents.

Chicken feather, which is consisted of keratin, has always been abandoned as solid waste. The utilization technologies of waste keratin have been developed in electric zones and materials fields so far. Recently, numerous new types of adsorbents have been used for antibiotic removal. The chicken feather carbon is supposed to be a potential one. In this study, an activated feather carbon (AFC) was developed as the absorbent of amoxicillin (AMOX) in simulated wastewater. The micropore structures of AFC were detected by the scanning electron microscope (SEM). X-ray photoelectron spectrum (XPS) was recorded and analyzed. A BET surface area, as high as 1838.86 m²/g, was measured in this study. At the meantime, a rapid adsorption (5∼7 min) and high removal efficiency (99.63%) could be observed. The kinetics, isotherms, and thermodynamic studies indicated that the adsorption of AMOX by AFC was an exothermic physic-adsorption. The interaction between AMOX and AFC surface was supposed to be a multiple-layer adsorption process for it is well fitted with the Freundlich model. The adsorption behavior could be described by pseudo-second-order model almost perfectly in kinetic studies. In addition, effect of pH, ionic strength, and reusability properties were also discussed in this paper. The AFC was proved to be the most rapid, efficient, and economically absorbent for AMOX removal, which was effective enough under various temperatures and saline circumstances. It was also proved useful, convenient, and renewable in dealing with the tough antibiotic pollutant problems and rebuilding of antibiotic sewage treatment facilities.