Affiner votre recherche
Résultats 1-10 de 29
Comparing the Effect of Kerosene Pollution on Forest and Industrial Soil Microbial Community
2016
Ziadabadi, Zahra | Hassanshahian, Mehdi
Kerosene is the colorless liquid and slightly heavier than gasoline thatspecific odor removes after evaporation. Soil and underground water source arecontaminated with different pollutants such as petroleum hydrocarbons. These pollutantshave various negative environmental effects on soil and surrounding environment. Theaim of this research is to understand the effect of kerosene pollution on two differentsoils. The two different collected soils include Industrial and Forest soil. Six microcosmswere designed. Indeed, each soil has three microcosms: unpolluted microcosm, pollutedmicrocosm, and polluted microcosm with nutrient (Nitrogen and Phosphor). Some factorswere assayed in each microcosm during 120 day of experiment. These factors includetotal heterotrophic bacteria, total kerosene degrading bacteria, dehydrogenase enzyme,and kerosene biodegradation. The results of this study show that the highest quantity ofheterotrophic bacteria is related to forest soil (6×109). The quantities of kerosenedegrading bacteria significantly were lower than heterotrophic bacteria in all soilmicrocosms. The quantity of kerosene degrading bacteria have decrement pattern until60th day of experiment, but, after this day, these bacteria have increment pattern. The bestdehydrogenase activity between different microcosms is related to polluted microcosmwith kerosene except for farmland soil. The highest biodegradation of kerosene in allstudied soil belongs to industrial microcosm (95%). Statistical analysis of the resultsshows that there is a significant correlation between MPN quantity of heterotrophicbacteria and other assayed factrs. Also, forest soil has significant difference with othersoils. It may be possible to propose appropriate strategies for bioremediation of differentstudied soil types using the results obtained in this research.
Afficher plus [+] Moins [-]Will open waste burning become India's largest air pollution source?
2022
Sharma, Gaurav | Annadate, Saurabh | Sinha, Baerbel
India struggles with frequent exceedances of the ambient air quality standard for particulate matter and benzene. In the past two decades, India has made considerable progress in tackling indoor air pollution, by phasing out kerosene lamps, and pushing biofuel using households towards Liquefied Petroleum Gas (LPG) usage. In this study, we use updated emission inventories and trends in residential fuel consumption, to explore changes in the contribution of different sectors towards India's largest air pollution problem. We find that residential fuel usage is still the largest air pollution source, and that the <10% households using cow dung as cooking fuel contribute ∼50% of the residential PM₂.₅ emissions. However, if current trends persist, residential biofuel usage in India is likely to be phased out by 2035. India's renewable energy policies are likely to reduce emissions in the heat and electricity sector, and manufacturing industries, in the mid-term. PM₂.₅ emissions from open waste burning, on the other hand, hardly changed in the decade from 2010 to 2020. We conclude that without strong policies to promote recycling and upcycling of non-biodegradable waste, and the conversion of biodegradable waste to biogas, open waste burning is likely to become India's largest source of air pollution by 2035. While our study is limited to India, our findings are of relevance for other countries in the global South suffering from similar waste management challenges.
Afficher plus [+] Moins [-]Poly-NIPAM/Fe3O4/multiwalled carbon nanotube nanocomposites for kerosene removal from water
2022
Abdullah, Thamer Adnan | Juzsakova, Tatjána | Le, Phuoc-Cuong | Kułacz, Karol | Salman, Ali D. | Rasheed, Rashed T. | Mallah, Muhammad Ali | Varga, Béla | Mansoor, Hadeel | Mako, Eva | Zsirka, Balázs | Nadda, Ashok Kumar | Nguyen, X Cuong | Nguyen, D Duc
Multiwalled carbon nanotubes (MWCNTs) were oxidized using a mixture of H₂SO₄ and HNO₃, and the oxidized MWCNTS were decorated with magnetite (Fe₃O₄). Finally, poly-N-isopropyl acrylamide-co-butyl acrylate (P-NIPAM) was added to obtain P-NIPAM/Fe/MWCNT nanocomposites. The nanosorbents were characterized by various techniques, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and Brunauer–Emmett–Teller analysis. The P-NIPAM/Fe/MWCNT nanocomposites exhibited increased surface hydrophobicity. Owing to their higher adsorption capacity, their kerosene removal efficiency was 95%; by contrast, the as-prepared, oxidized, and magnetite-decorated MWCNTs had removal efficiencies of 45%, 55%, and 68%, respectively. The P-NIPAM/Fe/MWCNT nanocomposites exhibited a sorbent capacity of 8.1 g/g for kerosene removal from water. The highest kerosene removal efficiency from water was obtained at a process time of 45 min, sorbent dose of 0.005 g, solution temperature of 40 °C, and pH 3.5. The P-NIPAM/Fe/MWCNTs showed excellent stability after four cycles of kerosene removal from water followed by regeneration. The reason may be the increase in the positive charge of the polymer at pH 3.5 and the increased adsorption affinity of the adsorbent toward the kerosene contaminant. The pseudo second-order model was found to be the most suitable model for studying the kinetics of the adsorption reaction.
Afficher plus [+] Moins [-]BTEX indoor air characteristic values in rural areas of Jordan: Heaters and health risk assessment consequences in winter season
2020
Alsbou, Eid M. | Omari, Khaled W.
Benzene, toluene, ethylbenzene, and xylene isomers (BTEX) are known to affect environmental air and health quality. In this study, the levels of BTEX compounds were determined in indoor air environments during the winter generated by several different heaters: diesel pot-bellied heater with chimney (DH); electric heater (EH); unfluted gas heater (GH); kerosene heater (KH); and wood pot-bellied heater with chimney (WH). The samples were collected using a diffusion passive adsorbent (activated charcoal) and then analyzed by gas chromatography-mass spectrometry (GC-MS). The results showed that the heaters differ in the quantity of BTEX released during operation. The KH was the most polluted heater based on BTEX measurement, followed by DH. The ∑BTEX for heaters were observed as follows: KH (290 μg m⁻³); DH (120 μg m⁻³); GH (84 μg m⁻³); WH (31 μg m⁻³); EH (16 μg m⁻³). Toluene was the predominant compound in all air samples. In KH and DH, the toluene to benzene ratios (T/B) were higher than 4 due to fuel evaporation, while GH had a T/B ratio of 3.9, indicating that the combustion of liquefied petroleum gas (LPG) was the main source. Moreover, a risk assessment was performed to evaluate where the cancer risks (CR) for benzene and ethylbenzene exceeded the critical values (10⁻⁶). KH was found to be the most harmful heater for residents, followed by DH and GH. For non-carcinogenic compounds, hazard quotients (HQ) were found to be less than one and thus unlikely to cause health problems.
Afficher plus [+] Moins [-]Valorization of biodiesel side stream waste glycerol for rhamnolipids production by Pseudomonas aeruginosa RS6
2021
Baskaran, Shobanah Menon | Zakaria, Mohd Rafein | Mukhlis Ahmad Sabri, Ahmad Syafiq | Mohamed, Mohd Shamzi | Wasoh, Helmi | Toshinari, Maeda | Hassan Mohd. Ali, | Banat, Ibrahim M.
Biodiesel side stream waste glycerol was identified as a cheap carbon source for rhamnolipids (RLs) production which at the same time could improve the management of waste. The present study aimed to produce RLs by using Pseudomonas aeruginosa RS6 utilizing waste glycerol as a substrate and to evaluate their physico-chemicals properties. Fermentation conditions such as temperature, initial medium pH, waste glycerol concentration, nitrogen sources and concentrations resulted in different compositions of the mono- and di-RLs produced. The maximum RLs production of 2.73 g/L was obtained when P. aeruginosa RS6 was grown in a basal salt medium supplemented with 1% waste glycerol and 0.2 M sodium nitrate at 35 °C and pH 6.5. At optimal fermentation conditions, the emulsification index (E₂₄) values of cooking oil, diesel oil, benzene, olive oil, petroleum, and kerosene were all above E₂₄₌50%. The surface tension reduction obtained from 72.13 mN/m to 29.4–30.4 mN/m was better than the surface activity of some chemical-based surfactants. The RLs produced possessed antimicrobial activities against Gram-negative and Gram-positive bacteria with values ranging from 37% to 77% of growth inhibition when 1 mg/mL of RLs was used. Concentrations of RLs below 1500 μg/mL did not induce phytotoxicity effects on the tested seeds (Vigna radiata) compared to the chemical-based- surfactant, SDS. Furthermore, RLs tested on zebrafish (Danio rerio) embryos only exhibited low acute toxicity with an LC₅₀ value of 72.97 μg/mL at 48 h of exposure suggesting a green and eco-biochemical worthy of future applications to replace chemical-based surfactants.
Afficher plus [+] Moins [-]Aircraft soot from conventional fuels and biofuels during ground idle and climb-out conditions: Electron microscopy and X-ray micro-spectroscopy
2019
Liati, A. | Schreiber, D. | Alpert, P.A. | Liao, Y. | Brem, B.T. | Corral Arroyo, P. | Hu, J. | Jonsdottir, H.R. | Ammann, M. | Dimopoulos Eggenschwiler, P.
Aircraft soot has a significant impact on global and local air pollution and is of particular concern for the population working at airports and living nearby. The morphology and chemistry of soot are related to its reactivity and depend mainly on engine operating conditions and fuel-type. We investigated the morphology (by transmission electron microscopy) and chemistry (by X-ray micro-spectroscopy) of soot from the exhaust of a CFM 56-7B26 turbofan engine, currently the most common engine in aviation fleet, operated in the test cell of SR Technics, Zurich airport. Standard kerosene (Jet A-1) and a biofuel blend (Jet A-1 with 32% HEFA) were used at ground idle and climb-out engine thrust, as these conditions highly influence air quality at airport areas. The results indicate that soot reactivity decreases from ground idle to climb-out conditions for both fuel types. Nearly one third of the primary soot particles generated by the blended fuel at climb-out engine thrust bear an outer amorphous shell implying higher reactivity. This characteristic referring to soot reactivity needs to be taken into account when evaluating the advantage of HEFA blending at high engine thrust. The soot type that is most prone to react with its surrounding is generated by Jet A-1 fuel at ground idle. Biofuel blending slightly lowers soot reactivity at ground idle but does the opposite at climb-out conditions. As far as soot reactivity is concerned, biofuels can prove beneficial for airports where ground idle is a common situation; the benefit of biofuels for climb-out conditions is uncertain.
Afficher plus [+] Moins [-]Household biomass fuel use, blood pressure and carotid intima media thickness; a cross sectional study of rural dwelling women in Southern Nigeria
2018
Ofori, Sandra N. | Fobil, Julius N. | Odia, Osaretin J.
Rising prevalence of cardiovascular disease requires in-depth understanding of predisposing factors. Studies show an association between air pollution and CVD but this association is not well documented in southern Nigeria where the use of biomass fuels (BMF) for domestic purposes is prevalent.This study aimed to explore the association between household BMF use and blood pressure (BP) and carotid intima media thickness (CIMT) among rural-dwelling women.A cross-sectional study of 389 women aged 18 years and older. Questionnaires were used to obtain data on predominant fuel used and a brief medical history. Wood, charcoal and agricultural waste were classified as BMF while kerosene, bottled gas and electricity were classified as non-BMF. Blood pressure and CIMT were measured using standard protocols. Regression analysis was used to assess the relationship between fuel type and BP, CIMT, pre-hypertension and hypertension after adjusting for confounders.There was a significant difference in the mean (standard deviation) systolic BP (135.3, 26.7 mmHg vs 123.8, 22.6 mmHg; p < 0.01), diastolic BP (83.7, 18.5 mmHg vs 80.1, 13.8 mmHg; p = 0.043) and CIMT (0.63, 0.16 mm vs 0.56, 0.14 mm; p = 0.004) among BMF users compared to non-BMF users. In regression analysis, the use of BMF was significantly associated with 2.7 mmHg higher systolic BP (p = 0.040), 0.04 mm higher CIMT (p = 0.048) in addition to increased odds of pre-hypertension (OR 1.67 95% CI 1.56, 4.99, P = 0.035) but not hypertension (OR 1.23 95% CI 0.73, 2.07, P = 0.440).In this population, there was a significant association between BMF use and increased SBP, CIMT and pre-hypertension. This requires further exploration with a large-scale longitudinal study design because there are policy implications for countries like Nigeria where a large proportion of the population still rely on BMF for domestic energy.
Afficher plus [+] Moins [-]Light absorption of organic carbon emitted from burning wood, charcoal, and kerosene in household cookstoves
2018
Xie, Mingjie | Shen, Guofeng | Holder, Amara L. | Hays, Michael D. | Jetter, James J.
Household cookstove emissions are an important source of carbonaceous aerosols globally. The light-absorbing organic carbon (OC), also termed brown carbon (BrC), from cookstove emissions can impact the Earth's radiative balance, but is rarely investigated. In this work, PM2.5 filter samples were collected during combustion experiments with red oak wood, charcoal, and kerosene in a variety of cookstoves mainly at two water boiling test phases (cold start CS, hot start HS). Samples were extracted in methanol and extracts were examined using spectrophotometry. The mass absorption coefficients (MACλ, m2 g−1) at five wavelengths (365, 400, 450, 500, and 550 nm) were mostly inter-correlated and were used as a measurement proxy for BrC. The MAC365 for red oak combustion during the CS phase correlated strongly to the elemental carbon (EC)/OC mass ratio, indicating a dependency of BrC absorption on burn conditions. The emissions from cookstoves burning red oak have an average MACλ 2–6 times greater than those burning charcoal and kerosene, and around 3–4 times greater than that from biomass burning measured in previous studies. These results suggest that residential cookstove emissions could contribute largely to ambient BrC, and the simulation of BrC radiative forcing in climate models for biofuel combustion in cookstoves should be treated specifically and separated from open biomass burning.
Afficher plus [+] Moins [-]Chemical characterization and source apportionment of aerosol over mid Brahmaputra Valley, India
2018
Bhuyan, Pranamika | Deka, Pratibha | Prakash, Amit | Pālaccantiran̲, Cu. | Hoque, Raza Rafiqul
Aerosol samples (as PM₁₀, n = 250) were collected from three rural/remote receptor locations in the mid Brahmaputra plain region and were chemically characterized for metals (Al, Fe, Co, Cu, Cr, Cd, Mn, Ni, Pb), ions (Ca²⁺, Mg²⁺, Na⁺, K⁺, NH₄⁺, F⁻, Cl⁻, NO₃⁻, SO₄²⁻), and carbon. Vital ratios like NO₃⁻/SO₄²⁻, EC/OC, K⁺/EC, K⁺/OC, enrichment factors and inter-species correlations were exploited to appreciate possible sources of aerosol. These empirical analyses pointed towards anthropogenic contributions of aerosol, particularly from biomass burning, vehicular emission, and road dust. The chemically characterized concentration data were subsequently fed into two receptor models viz. Principal Component Analysis-Multiple Linear Regression (PCA-MLR) and Chemical Mass Balance (CMB) for apportionment of sources of aerosol. The PCA-MLR estimates identified that the combustion sources together accounted for ∼42% of aerosol and the contribution of secondary formation to be 24%. Road and crustal dusts have been well apportioned by PCA-MLR, which together accounts for ∼26% of the aerosol. The CMB model estimates explained that the combustion sources taken together contributed ∼47% to the aerosol, which includes biomass burning (27%), vehicular emission (13%), coal (1%), kerosene (4%), and petroleum refining (2%). Other major sources that were apportioned were road dust (15%), crustal dust (26%), and construction dust (6%). There are inherent limitations in the source strength estimations because of uncertainty present in the source emission profiles that have been applied to the remote location of India. However, both the models (PCA-MLR and CMB) estimated the contribution of combustion sources to 42 and 47% respectively, which is comparable.
Afficher plus [+] Moins [-]Estimation of main greenhouse gases emission from household energy consumption in the West Bank, Palestine
2013
Abu-Madi, Maher | Rayyan, Ma'moun Abu
The main GHGs (CO2, NOx, and SO2) have been quantified based on national energy and population statistics. The results show that the contribution of households' energy consumption in the West Bank to global CO2 emission is about 0.016%, while contribution of total energy consumption by all sectors is about 0.041%. The results show that wood is the most polluting energy source in terms of CO2 and NOx emission, while electricity is the most polluting source in terms of SO2. Other sources like diesel, kerosene, and LPG that contribute to the GHGs emission are also quantified. The total amounts of CO2, NOx, and SO2 by households in the West Bank are 4.7 million tonne per year, 3.02 thousand tonne per year, and 2.23 thousand tonne per year respectively. This study presents a set of measures that might help in reducing the level of GHGs emission and protect the environment.
Afficher plus [+] Moins [-]