Affiner votre recherche
Résultats 1-2 de 2
Characterization of Solid Waste Incineration Fly Ashes and their Heavy Metal Leaching Behavior
2023
Li, Yonglun | Chen, Weifang | Hu, Mingzhu
Two fly ashes from municipal solid waste incineration were selected to study their heavy metal leaching behavior. The main purpose of this research is to investigate the characteristics of fly ashes and compare the leaching of heavy metals in different leaching environment. pH and acid neutralization capacity analysis showed that fly ashes were highly alkaline. Fly ashes also contained a variety of heavy metals including Pb, Cu, Cr, Zn, Cd and Ni etc. Leaching studies showed that the alkalinity of fly ashes raised the pH of leaching solution from acidic to basic. Ni, Cu and Zn were strongly bound to ashes and manifested low leaching. In contrast, Cr and Cd had high mobility but their leaching was inhibited by the low solubility of carbonate Cr and Cd. Pb was highly leachable in the alkaline environment with concentration in the leaching solution reached as high as 9.74 mg/L. In addition, the presence of EDTA in the environment also increased leaching. Pb concentration was raised to 16.63 mg/L. This could be attributed to the chelating capacity of EDTA which means that the presence of organics in natural environment should be taken into consideration.
Afficher plus [+] Moins [-]Batch and Column Studies on Nickle and Cadmium Removal Using Iranian Clay-based Geopolymer
2021
Bakhtiari, Somayeh | Zeidabadinejad, Asma | Abbaslou, Hanieh | Ghanizadeh, Alireza
The production rate of industrial and agricultural waste is increasing due to population growth. Soil is the most important receiver of industrial and agricultural waste. Contaminants such as heavy metals in various waste after reception by the soil, immediately become part of the cycle that has different impacts on the environment. Geopolymer, as a chemical stabilizer has the potential to stabilize heavy metals in the soil. In this research, several geopolymers for the stabilization of heavy metals in soil were synthesized. Silicon dioxide (SiO2) and aluminosilicate (Al2SiO4) must be used to produce the geopolymers. Rice husk ash was used as the SiO2 source. Also, Iranian zeolite and sepiolite, and red clay soil were utilized as the source of Al2SiO4. The synthesized geopolymers were investigated for the adsorption of nickel and cadmium. Also, batch and column studies of using geopolymers for the chemical stabilization of heavy metals in soil were conducted. The results revealed a high adsorption capacity of the geopolymers. The zeolite, sepiolite, and red clay geopolymer-soil samples adsorbed 100% of the heavy metals (i.e., Ni and Cd) at a concentration of 100 ppm. The zeolite geopolymer adsorbent adsorbed 57% and 96% of Ni and Cd at a concentration of 1000 ppm, respectively. In general, it was concluded that the use of geopolymer compounds in soils with high heavy metal adsorption capacity could be an efficient approach to prevent groundwater resource pollution.
Afficher plus [+] Moins [-]