International audience | Road traffic is one of the main sources of particulate matter in the urban environment, emitting particulate organic andelemental carbon compounds and metal-rich particles through combustion and brakes and tires wear. In Western Africa, thecarbon and metal composition of airborne particles is also influenced by additional sources linked to biomass combustionand recent industrialization. Here, we investigated the impact of combustion-related and non-combustion-related emissionson the distribution of carbonaceous fractions and iron-rich particles in two urban environments in France and Senegal.The supermicron fraction (Da > 1μm) showed a significantly higher isothermal remanent magnetization (SIRM) than finerfractions, accounting for 79% in France and 81% in Senegal of the total SIRM. In the submicron fraction (Da < 1μm), we notedsignificantly higher concentrations of total carbon (TC) and elemental carbon (EC) than for other fractions, both accountingfor 71% in France and 68% and 75% in Senegal of the total and elemental particulate carbon concentration, respectively.Electron microscope observations revealed the presence of iron-rich particles for Da < 0.2μm, however, associated with aweak SIRM. Such iron particles may be produced by combustion or abrasion while we suspect that emissions by the abrasionprocess produce larger particles.

Herein, polyethylenimine (PEI)-grafted nitrogen (N)-doping magnetic biochar (PEIMW@MNBCBM) was synthesized, and characterization results showed that the microwave-assisted PEI grafting and ball milling-assisted N doping introduced abundant amino, pyridine N and pyrrole N structures onto biochar, which possessed high affinity to Cr(VI) in the anion form. The as-prepared PEIMW@MNBCBM displayed pH-dependence adsorption performance and high tolerance to co-existing ions with maximum uptake capacity of Cr(VI) identified as 183.02 mg/g. Furthermore, PEIMW@MNBCBM could bind Cr(VI) through electrostatic attraction, complexion, precipitation, reduction and pore filling. Especially, effective reduction of Cr(VI) was ascribed to cooperative electron transfer of partial oxygen-containing functional groups, intramolecular pyridine/pyrrole N, protonated amino and Fe²⁺ on the adsorbent, while oxygen-containing and amino functional groups from N-doping biochar and PEI synergistically complexed Cr(III) via providing lone pair electrons to form coordinate bonds. Furthermore, the stable precipitation was formed between Fe³⁺ and Cr(III). Additionally, the Cr(VI) elimination efficiency could maintain 95.83% even after four adsorption-desorption cycles, suggesting PEIMW@MNBCBM as a high-performance adsorbent for Cr(VI) contaminated water remediation.

In this study, magnetic biochar (MAB) and humic acid (HA)-coated magnetic biochar produced from apple branches without and after cellulase hydrolysis (HMAB and CHMAB, respectively) were prepared and tested as adsorbents of enrofloxacin (ENR) and moxifloxacin (MFX) in aqueous solution. Compared with MAB and HMAB, novel adsorbent CHMAB possessed a superior mesoporous structure, greater graphitization degree and abundant functional groups. When antibiotic solutions ranged from 2 to 20 mg L⁻¹, the theoretical maximum adsorption capacities of CHMAB for ENR and MFX were 48.3 and 61.5 mg g⁻¹ at 35 °C with adsorbent dosage of 0.4 g L⁻¹, respectively, while those of MAB and HMAB were 39.6 and 54.4 mg g⁻¹, and 44.7 and 59.0 mg g⁻¹, respectively. The pseudo-second-order kinetic model and Langmuir model presented a better fitting to the spontaneous and endothermic adsorption process. The maximum adsorption capacity of ENR and MFX onto CHMAB was achieved at initial pH values of 5 and 8, respectively. Additionally, the adsorption capacity of ENR and MFX decreased with increasing concentrations of K⁺ and Ca²⁺ (0.02–0.1 mol L⁻¹). Synergism between the pore-filling effect, π-π electron-donor-acceptor interactions, regular and negative charge-assisted H-bonding, surface complexation, electrostatic interactions and hydrophobic interactions may dominate the adsorption process. This study demonstrated that a novel magnetic biochar composite prepared through pyrolysis of agricultural waste lignocellulose hydrolyzed by cellulase in combination with HA coating was a promising adsorbent for eliminating quinolone antibiotics from aqueous media.

This paper investigated the impacts of various real microplastics (MPs), i.e., polyethylene (PE) and polyethylene terephthalate (PET) with different sizes (1000–2000 and 100–200 μm) and different dosages (0.5 and 5% on a dry weight basis), on the toluene removal during the thermally enhanced air injection treatment. First, microscopic tests were carried out to determine the MPs' microstructure and behavior. The PE was mainly a small block, and PET appeared filamentous and sheeted with a larger slenderness ratio. Second, the interactions between MPs and toluene-contaminated soils were revealed by batch adsorption equilibrium experiments and low-field magnetic resonance. The morphological differences and dosage of the MPs impacted soils’ total porosity (variation range: 39.2–42.7%) and proportion of the main pores (2–200 μm). Third, the toluene removal during the air injection consisted of compaction, rapid growth, rapid reduction, and tailing stages, and the MPs were regarded as an emerging solid state to affect these removal stages. The final cumulative toluene concentrations of soil-PET mixtures were influenced by total porosity, and those of soil-PE mixtures were controlled by total porosity (influence weight: 0.67) and adsorption capacity (influence weight: 0.33); meanwhile, a self-built comprehensive coefficient of MPs can reflect the relationship between them and cumulative concentrations (correlation coefficient: 0.783).

Chlorinated and brominated polycyclic aromatic hydrocarbons (Cl/Br-PAHs) are persistent organic pollutants with potential carcinogenic toxicities that are even higher than those of their parent PAH congeners. Current knowledge of Cl/Br-PAH sources and emission characteristics is lacking. Electric arc furnace (EAF) steelmaking is a potential source for Cl/Br-PAHs, considering that preheating of raw materials before they enter the EAF could produce suitable conditions for Cl/Br-PAHs formation. In this field study, we identified EAFs as an important source of Cl/Br-PAHs and clarified their emission concentrations, fingerprints by gas chromatography coupled with high-resolution magnetic mass spectrometry. Potential formation mechanisms of Cl/Br-PAHs were also proposed. The mass concentration ranges for Σ₁₈Cl-PAHs and Σ₁₈Br-PAHs in stack gas were 25.85–4191 ng Nm⁻³ and 1.02–341 ng Nm⁻³, respectively. The variation of concentration indicated that the steel scrap composition greatly affected the production of Cl/Br-PAHs. The congener ratios including 6-chlorobenzo [a]pyrene/3-chlorofluoranthene and 1-chloroanthracene/1-chloropyrene could be used to estimate the influence of industrial sources on Cl-PAH occurrences in the air. Ring structure growth was the dominant formation pathway for Cl/Br-PAHs, distinctly different from dioxin formation mechanisms dominated by precursor dimerization and chlorination.

We investigated the competitive effects of different fractions of wastewater treatment plant effluent organic matter (EfOM) on adsorption of an organic micro pollutant (OMP), propranolol (PRO), in a fixed bed column packed with magnetic tyre char (MTC). The results showed that the presence of EfOM inhibited PRO adsorption in wastewater leading to decreased PRO adsorption capacity from 5.86 to 2.03 mg/g due to competitive effects and pore blockage by smaller EfOM fractions. Characterization of EfOM using size exclusion chromatography (LC-OCD) showed that the principal factor controlling EfOM adsorption was pore size distribution. Low molecular weight neutrals had the highest adsorption onto MTC while humic substances were the least interfering fraction. Effect of important parameters such as contact time, linear velocity and bed height/diameter ratio on MTC performance was studied in large-lab scale columns. Linear velocity and contact time were found to be effective in increasing adsorption capacity of PRO on MTC and delaying breakthrough time. Increase in linear velocity from 0.64 cm/min to 1.29 cm/min increased mass transfer and dispersion, resulting in considerable rise of adsorbed amount (5.86 mg/g to 22.58 mg/g) and increase in breakthrough time (15.8–62.7 h). Efficiency of non-equilibrium Hydrus model considering dispersion and mass transfer mechanism was demonstrated for real wastewater and scale up purposes. Ball milling for degradation of adsorbed PRO and regeneration of MTC resulted in 79% degradation of PRO was achieved after 5 h milling (550 rpm), while the addition of quartz sand increased the efficiency to 92%.

Soil magnetic susceptibility (MS) is an important parameter in pollution studies owing to its relationship with atmospheric deposition, and the concomitance of technogenic magnetic particles (TMPs) with potentially toxic elements (PTEs), Fe and Mn. In this study, we performed a detailed soil study under tree canopies for a forest area with high historical TMP-bearing industrial dust deposition. The technogenic sources of magnetic signals in topsoil were analyzed via scanning electron microscope electron dispersive spectroscopy (SEM/EDS), while the minor role of geogenic sources was obtained from soil profile analysis. To our knowledge, this is the first study to show soil TMP distribution in three dimensional (3D) space. In addition, using the data from 275 soil cores and 8250 individual measurements, 3D maps of MS for four tree species were plotted. There is a noticeable difference between coniferous (spruce and pine) and deciduous (beech and oak) species regarding depth of maximum concentration of magnetic particles in the topsoil. For beech and oak, maximum MS values were measured at 3 cm depth; pine and spruce, maximum MS values were measured at 5 cm depth. However, no significant differences were found among tree species in terms of mean MS or PTE contents. This suggests that there is little different among tree species in terms of dust capture over their life span. Significant correlations between MS and other parameters (PTEs and organic matter contents) present new possibilities for spatial 3D analysis of topsoil horizons.

Children in urban environments are exposed to potential harmful elements (PHEs) through variable exposure media. Playing activities in outdoor playgrounds have been considered of high concern due to children's exposure to sand-bound PHEs through unintentional or intentional sand ingestion. Furthermore, the affinity of magnetic particles with dust-bound PHEs in playgrounds has been reported. In this study, playground sands (PG sands) from public playgrounds in the city of Thessaloniki, N. Greece were sampled and the levels, the contamination degree, oral bioaccessibility and exposure assessment of PHEs were evaluated. In addition, low-cost and fast magnetic measurements (i.e. mass specific magnetic susceptibility, χₗf) were explored as potential pollution and health risk proxies. Mineralogically, siliceous PG sands dominated, while morphologically angular magnetic particles and Fe-rich “spherules” of anthropogenic origin were revealed and verified by enhanced χₗf values. The average total elemental contents exhibited a descending order of Mn > Ba > Cr > Zn > Ni > Pb > Cu > Co > As > Sn > Bi > Cd, however only Cd, Bi, Pb, Cr, As and Zn were presented anthropogenically enhanced. Notable increase on PHEs levels and finer sand fractions were observed with continuous sand use. Anthropogenically derived elements (i.e. Cd and Pb with high Igₑₒ values) exhibited higher bioaccessible fractions in PG sands and considered easily soluble in gastric fluids through ingestion. However, increased risks were found for specific PHEs (especially Pb) only in a worst case exposure scenario of an intentional sand ingestion (pica disorder). Statistical analysis results revealed a linkage of anthropogenic components with sand-bound magnetic particles. Moreover, the recorded high affinity of Pb contents (in an enhanced magnetized sub-set of PG sands) and bioaccessible Cd fractions with χₗf provide a preliminary indication on the successful applicability of low-cost and fast magnetic measurements in high impacted playground environments.

The environmental-friendly photocatalytic process with a magnetic catalyst CoFe₂O₄/TiO₂ mediated by solar light for ibuprofen (IBP) degradation in pure water, wastewater effluent and artificial seawater was investigated systematically. The study aims to reveal the efficiency, the mechanism and toxicity evolution during IBP degradation. Hydroxyl radicals and photo-hole (h⁺) were found to contribute to the IBP decay. The presence of SO₄²⁻ showed no significant effect, while NO₃⁻ accelerated the photodegradation, and other anions including HCO₃⁻, Cl⁻, F⁻, and Br⁻ showed significant inhibition. The removal efficiency was significantly elevated with the addition of peroxymonosulfate (PMS) or persulfate (PS) ([Oxidant]₀:[IBP]₀ = 0.4–4), with reaction rate of 5.3–13.1 and 1.3–2.9 times as high as the control group, respectively. However, the reaction was slowed down with the introduction of H₂O₂. A mathematic model was employed to describe the effect of ferrate, high concentration or stepwise addition of ferrate was suggested to play a positive role in IBP photodegradation. Thirteen transformation products were identified and five of them were newly reported. The degradation pathways including hydroxylation, the benzene ring opening and the oxidation of carbon were proposed. IBP can be efficiently removed when spiked in wastewater and seawater despite the decreased degradation rate by 41% and 56%, respectively. Compared to the IBP removal, mineralization was relatively lower. The adverse effect of the parent compound IBP to the green algae Chlorella vulgaris was gradually eliminated with the decomposition of IBP. The transformation product C178a which possibly posed toxicity to rotifers Brachionus calyciflorus can also be efficiently removed, indicating that the photocatalysis process is effective in IBP removal, mineralization and toxicity elimination.

Size and magnetic separation of incineration bottom ash (IBA) are common for ferrous metals recovery, however, their influences on the mineral phase and the element redistribution, and subsequently the induced variation of metal leaching potential herein remain limited understanding. The lack of research in this field may misunderstand IBA performances, cause confused results for comparison among various studies, and potentially lead to biased conclusions. We herein quantitatively investigate the effects of size and magnetic separation on the IBA based on element distribution, leaching behavior, morphology, and mineralogy with statistical analysis. For preparation, sieving was performed with the original IBA (to obtain 7 size-fractions termed as OR1-7, respectively), followed by magnetic separation of each, to further yield magnetic fractions (MF1-7) to discriminate nonmagnetic fractions (NF1-7). In this study, we show that size and magnetic separation may pose significant yet different impacts on different fractions, which would affect their leaching potential concerning their respective downstream applications.