Biomanipulation is an efficient tool to control eutrophication and cyanobacterial blooms in temperate lakes. However, the effects of this technique are still unclear for tropical ecosystems. Herein, we evaluated the effects of the biomanipulation on cyanobacterial biomass in a tropical shallow reservoir in Northeast Brazil. A mesocosm experiment was conducted in Tapacurá reservoir (Pernambuco) with eight treatments, in which we factorially manipulated the presence of submerged macrophytes (Ceratophyllum demersum), large herbivorous zooplankton (Sarsilatona serricauda), and nutrients (0.4 mg L⁻¹ of nitrogen and 0.5 mg L⁻¹ of phosphorus). On the first, fifth, and tenth days, we analyzed the total biomass of cyanobacteria, and the morphotypes coccoid, heterocyted filamentous, and non-heterocyted filamentous cyanobacteria; these components were compared through a three-way ANOVA. The bloom was composed mainly of five Microcystis morphospecies (coccoids) and Raphidiopsis raciborskii (heterocyted filaments). On the fifth day of the experiment, the combined addition of macrophytes and zooplankton was more efficient at controlling cyanobacterial biomass. On the tenth day, all macrophyte treatments showed significant cyanobacterial biomass reduction, decreasing up to 84.8%. On the other hand, nutrients and zooplankton, both isolated and combined, had no significant effect. Macrophytes also reduced the biomass of coccoids, heterocyted filaments, and non-heterocyted filaments when analyzed separately on the tenth day. Ceratophyllum demersum was more efficient at controlling the bloom than the addition of large herbivorous zooplankton, which could be related to allelopathy since cyanobacterial biomass was also reduced when nutrients were added. The addition of submerged macrophytes with allelopathic potential, associated with the increase of large herbivorous zooplankton, proved to be an efficient technique for controlling tropical cyanobacterial blooms.

The effects of exposure to different levels of ionising radiation were assessed on the genetic, epigenetic and microbiome characteristics of the “hologenome” of earthworms collected at sites within the Chernobyl exclusion zone (CEZ). The earthworms Aporrectodea caliginosa (Savigny, 1826) and Octolasion lacteum (Örley, 1881) were the two species that were most frequently found at visited sites, however, only O. lacteum was present at sufficient number across different exposure levels to enable comparative hologenome analysis. The identification of morphotype O. lacteum as a probable single clade was established using a combination of mitochondrial (cytochrome oxidase I) and nuclear genome (Amplified Fragment Length Polymorphism (AFLP) using MspI loci). No clear site associated differences in population genetic structure was found between populations using the AFLP marker loci. Further, no relationship between ionising radiation exposure levels and the percentage of methylated loci or pattern of distribution of DNA methylation marks was found. Microbiome structure was clearly site dependent, with gut microbiome community structure and diversity being systematically associated with calculated site-specific earthworm dose rates. There was, however, also co-correlation between earthworm dose rates and other soil properties, notably soil pH; a property known to affect soil bacterial community structure. Such co-correlation means that it is not possible to attribute microbiome changes unequivocally to radionuclide exposure. A better understanding of the relationship between radionuclide exposure soil properties and their interactions on bacterial microbiome community response is, therefore, needed to establish whether these the observed microbiome changes are attributed directly to radiation exposure, other soil properties or to an interaction between multiple variables at sites within the CEZ.

The application of low ozone dosage to minimize the problems caused by filamentous foaming was evaluated in two bioreactors of an urban wastewater treatment plant. Filamentous and nitrifying bacteria, as well as protist and metazoa, were monitored throughout a one-year period by FISH and conventional microscopy to examine the effects of ozone application on these specific groups of microorganisms. Multivariate data analysis was used to determine if the ozone dosage was a key factor determining the low carbon and nitrogen removal efficiencies observed throughout the study period, as well as to evaluate its impact on the biological communities monitored. The results of this study suggested that ozonation did not significantly affect the COD removal efficiency, although it had a moderate effect on ammonia removal efficiency. Filamentous bacteria were the community most influenced by ozone (24.9% of the variance explained by ozone loading rate), whilst protist and metazoa were less affected (11.9% of the variance explained). Conversely, ozone loading rate was not a factor in determining the nitrifying bacterial community abundance and composition, although this environmental variable was correlated with ammonia removal efficiency. The results of this study suggest that different filamentous morphotypes were selectively affected by ozone.

Microplastics are emerging pollutants which have been extensively detected in water environments. However, little is known about microplastic pollution in soil environments. In this study, we investigated microplastics and mesoplastics in farmland soils from twenty vegetable fields around the suburbs of Shanghai. In each site, three duplicate soil samples were collected from shallow (0–3 cm) and deep soils (3–6 cm), respectively. Microplastics (sizes of 20 μm - 5 mm) and mesoplastics (5 mm - 2 cm) were detected using methods of density extraction, 30% H₂O₂ digestion and micro-fourier transform infrared spectroscopy. The abundance of microplastics was 78.00 ± 12.91 and 62.50 ± 12.97 items kg⁻¹ in shallow and deep soils, respectively. While, mesoplastics were found with abundance of 6.75 ± 1.51 and 3.25 ± 1.04 items kg⁻¹ in shallow and deep soils. Among these micro(meso)plastics, 48.79% and 59.81% were in size of <1 mm in shallow and deep soils. The main morphotypes of microplastics included fiber, fragment and film, mostly in color of black or transparent. Moreover, we found that topsoil contained higher concentrations and larger sizes of micro(meso)plastics than deep soil. In addition, the vast majority of micro(meso)plastics were polypropylene (50.51%) and polyethylene (43.43%). This study reveals occurrence and characteristics of microplastic pollution in typical farmland soils. It provides important data for subsequent research on microplatics in the terrestrial ecosystem.

Although a growing number of studies have reported microplastics (MPs) in biosolids and soils, there are significant differences in the concentrations found across different regions worldwide. This has raised questions about the quality of studies due to a lack of standardized sampling and analysis methods for detecting MPs in such complex samples. In this study, we applied a systematic quantitative literature review (SQLR) methodology to analyze studies reporting MPs in sludge/biosolids and agricultural soils. We also assessed the quality of individual studies on MPs in sludge/biosolids and soils based on the inclusion of quality assurance/quality control (QA/QC) procedures. There is limited understanding about MPs in soils with a history of biosolid application with only 9% of publications reporting MPs in biosolid-amended soil. There was almost eight orders of magnitude difference (3.4 × 10⁻⁵ to 9.4 × 10³ particles/g) between the highest concentrations of MPs in sludge/biosolid samples compared to the lowest virgin soil samples. The literature shows a consistency in the polymer types (polyester, PP and PE) and morphotypes (fibres and fragments) of MPs most frequently detected in biosolids and soils, suggesting a potential role of biosolids in soils MP pollution. Despite the large variations in the sizes of MPs, there was a negative correlation between the lowest size detected and concentrations reported. This indicates that current concentrations of MPs are influenced by the detection size. Our assessment shows that the majority of studies to-date lack critical QA/QC measures, particularly field blank, positive control and method validation. This highlights an urgent need for quality improvement of future research in this field to produce reliable data, ultimately crucial to assess the risk of MPs and derive suitable environmental guidelines. It is recommended that MPs studies methodically include QA/QC protocols at every step of the process to ensure the integrity of the data that is published.

This study focuses on the presence of MPs in the sediment beds around coral reefs of MPNPs in Baja California Sur, México. Based on seasonal sampling results, comparison of MPs from Cabo Pulmo (avg. 680.25 items/100 g⁻¹ d.w) recorded higher values than Espiritu Santo Island (avg. 321.75 items/100 g⁻¹ d.w) from backshore/foreshore regions. Fibrous MPs are the dominant morphotypes followed by fragments and spheres. SEM/EDS analysis revealed that the MPs are altered texturally in surface and is bioavailable to marine organisms independent of size/shape. FTIR analysis indicate different polymers (in %) in the form of PP (70), PET (65), HDPE (59), LDPE (50), PS (30), PC (18), PU (10) and RYN (10). Most of the MPs are secondary in origin resulting from man-made and tourist's activities controlled by wave transportation and tidal currents. Existence of MPs in sediment beds around the coral reefs signals the ways for future investigations.

A review of 80 papers on microplastic (MP) particles in marine sediments was conducted for different sedimentary environments. The papers were assessed for data on average MP concentration, MP morphotype (fibres, fragments, films, etc.), MP particle size distribution, sediment accumulation rates and correlations with total organic carbon (TOC) and sediment grain size. The median concentration of MP particles is highest in fjords at 7000 particles kg⁻¹ dry sediment (DS) followed by 300 in estuarine environments, 200 in beaches, 200 in shallow coastal environments, 50 on continental shelves and 80 particles kg⁻¹ DS for deep sea environments. Fibres are the dominant MP type and account for 90% of MP on beaches (median value) and 49% of particles in tide-dominated estuaries. In order to advance our understanding of the fate of MP in the ocean, quantitative assessments are needed of MP flux rates (g m⁻² year⁻¹) in a range of sedimentary environments.

The emergence of a red tide resulting in yellow-brownish discoloration of waters in Porto Cesareo bay (Italy) during July–August 2018 is reported. The species responsible for the bloom was the dinoflagellate Margalefidinium cf. polykrikoides. Cell densities reached 9.1 × 10⁶ cells L⁻¹ during the initial outbreak. A second peak was observed about three weeks later reaching 6.7 × 10⁵ cells L⁻¹. Study of live specimens showed great variation in cell size and shape. Different cyst morphotypes were found in the water samples and in the sediment. For the first time, we followed several stages of the life cycle of M. cf. polykrikoides in natural samples. Fish die-offs in the bay were not observed, however this high-density bloom may have caused consequences on the ecosystem (amount of mucilage on the beach) and in turn, on tourism that is the main activity in the area during the summer season.

Progressive fragmentation of larger plastic debris due to the mechanical action of wind/waves, prolonged exposure to ultraviolet radiation, or biological degradation has led to the formation of microplastics or MPs (<5 mm). MPs are pervasive in nature and hence, ubiquitous in distribution across the global marine systems. The Arctic Ocean, despite its remoteness, has been reported to contain a high concentration of MPs. However, studies on the presence of MPs in the sediment compartments of the Arctic Ocean are relatively lesser than that of the water column, surface water and Arctic fauna. Similarly, MP pollution of the Arctic fjords remains understudied. Here, we present the occurrence of MPs in the sediments of Kongsfjorden, an Arctic fjord in the Svalbard archipelago. Sediment samples from eight locations in Kongsfjorden, when analyzed, reveal the presence of MPs in three sites, with values ranging from 4 to 24 MPs/kg (dry weight) sediment. The highest number of MPs was observed at site K5 (24 particles/kg). On an average, 2.87 MPs/kg were recorded and their size ranged from 55 μm to 381 μm. Stereomicroscopic observation of MPs indicated fragment and fibers as the morphotypes of MPs. Polymer profile analysis with micro-Raman spectroscope confirmed high-density polyethylene (HDPE), low-density polyethylene (LDPE) and polyamide (PA) as the polymer components of the MPs found in the sediment samples. Of these, HDPE was the predominant polymer. Further detailed studies are needed to understand the source and the mechanisms involved in transporting MPs to the sediment and their impact on Arctic fjords.

Accumulation of microplastics (MPs) in marine organisms poses an imminent environmental threat and health risk due to the possibility of trophic transfer of accumulated MPs in ecologically important food chains. In this context, a field-level study was conducted on the fishing grounds of the north eastern part of the Arabian Sea through experimental fishing, and the gastrointestinal tracts (GT) of three different species of shrimps (n=180) were examined for the incidence of microplastics. The results showed that all shrimp caught from the fishing grounds had significant levels of MPs in the gastrointestinal tracts. A total number of 1220 microplastic items were recorded from the pooled samples, with an average of 6.78 ± 2.80 items per individual. The gastrointestinal tract showed an average number of 70.32 ± 34.67 MPs per gram of the gut material. The MPs with the size range of 100–250 μm were the most abundant form found in the shrimp species analyzed. Among the colored MP particles, black color was the most dominant (30.16%) form of MP. Fibers, fragments, pellets, beads, and films were the common morphotypes; however, fibers showed an occurrence of 39.40%, 47.39%, and 41.89% in the GTs of Metapenaeus monoceros, Parapeneopsis stylifera, and Penaeus indicus, respectively. In the present study, six types of plastic polymers were identified from the GTs of the studied samples. The findings confirm the presence of microplastics in the natural habitats of shrimps beyond the coast and indicate that shrimps caught from these coastal fishing grounds contain MPs in their gut. The findings underline the immediate scientific intervention for the microplastic reduction in the marine environment.