Affiner votre recherche
Résultats 1-10 de 35
Non-linear release dynamics for a CeO2 nanomaterial embedded in a protective wood stain, due to matrix photo-degradation
2018
Scifo, Lorette | Chaurand, Perrine | Bossa, Nathan | Avellan, Astrid | Auffan, Mélanie | Masion, Armand | Angeletti, Bernard | Kieffer, Isabelle | Labille, Jérôme | Bottero, Jean-Yves | Rose, Jerome
The release of CeO2-bearing residues during the weathering of an acrylic stain enriched with CeO2 nanomaterial designed for wood protection (Nanobyk brand additive) was studied under two different scenarios: (i) a standard 12-weeks weathering protocol in climate chamber, that combined condensation, water spraying and UV–visible irradiation and (ii) an alternative accelerated 2-weeks leaching batch assay relying on the same weathering factors (water and UV), but with a higher intensity of radiation and immersion phases. Similar Ce released amounts were evidenced for both scenarios following two phases: one related to the removal of loosely bound material with a relatively limited release, and the other resulting from the degradation of the stain, where major release occurred. A non-linear evolution of the release with the UV dose was evidenced for the second phase. No stabilization of Ce emissions was reached at the end of the experiments. The two weathering tests led to different estimates of long-term Ce releases, and different degradations of the stain. Finally, the photo-degradations of the nanocomposite, the pure acrylic stains and the Nanobyk additive were compared. The incorporation of Nanobyk into the acrylic matrix significantly modified the response of the acrylic stain to weathering.
Afficher plus [+] Moins [-]Photocatalytic decomposition of selected biologically active compounds in environmental waters using TiO2/polyaniline nanocomposites: Kinetics, toxicity and intermediates assessment
2018
Šojić Merkulov, Daniela V. | Despotović, Vesna N. | Banić, Nemanja D. | Armaković, Sanja J. | Finčur, Nina L. | Lazarević, Marina J. | Četojević-Simin, Dragana D. | Orčić, Dejan Z. | Radoičić, Marija B. | Šaponjić, Zoran V. | Čomor, Mirjana I. | Abramović, Biljana F.
A comprehensive study of the removal of selected biologically active compounds (pharmaceuticals and pesticides) from different water types was conducted using bare TiO₂ nanoparticles and TiO₂/polyaniline (TP-50, TP-100, and TP-150) nanocomposite powders. In order to investigate how molecular structure of the substrate influences the rate of its removal, we compared degradation efficiency of the initial substrates and degree of mineralization for the active components of pharmaceuticals (propranolol, and amitriptyline) and pesticides (sulcotrione, and clomazone) in double distilled (DDW) and environmental waters. The results indicate that the efficiency of photocatalytic degradation of propranolol and amitriptyline was higher in environmental waters: rivers (Danube, Tisa, and Begej) and lakes (Moharač, and Sot) in comparison with DDW. On the contrary, degradation efficacy of sulcotrione and clomazone was lower in environmental waters. Further, of the all catalysts applied, bare TiO₂ and TP-100 were found to be most effective in the mineralization of propranolol and amitriptyline, respectively, while TP-150 appeared to be the most efficient in terms of sulcotrione and clomazone mineralization. Also, there was no significant toxicity observed after the irradiation of pharmaceuticals or pesticides solutions using appropriate catalysts on rat hepatoma (H-4-II-E), mouse neuroblastoma (Neuro-2a), human colon adenocarcinoma (HT-29), and human fetal lung (MRC-5) cell lines. Subsequently, detection and identification of the formed intermediates in the case of sulcotrione photocatalytic degradation using bare TiO₂ and TP-150 showed slightly different pathways of degradation. Furthermore, tentative pathways of sulcotrione photocatalytic degradation were proposed and discussed.
Afficher plus [+] Moins [-]Rational design of carbonaceous nanofiber/Ni-Al layered double hydroxide nanocomposites for high-efficiency removal of heavy metals from aqueous solutions
2018
Yu, Shujun | Liu, Yang | Ai, Yuejie | Wang, Xiangxue | Zhang, Rui | Chen, Zhongshan | Chen, Zhe | Zhao, Guixia | Wang, Xiangke
Heavy metal pollution of water sources has raised global environmental sustainability concerns, calling for the development of high-performance materials for effective pollution treatment. Herein, we report a facile approach to synthesize carbonaceous nanofiber/NiAl layered double hydroxide (CNF/LDH) nanocomposites for high-efficiency elimination of heavy metals from aqueous solutions. The CNF/LDH nanocomposites were characterized by three-dimensional architectures formed by the gradual self-assembly of flower-like LDH on CNF. The nanocomposites exhibited excellent hydrophilicity and high structural stability in aqueous solutions, guaranteeing the high availability of active sites in these environments. High-efficiency elimination of heavy metal ions by the CNF/LDH nanocomposites was demonstrated by the high uptake capacities of Cu(II) (219.6 mg/g) and Cr(VI) (341.2 mg/g). The sorption isotherms coincided with the Freundlich model, most likely because of the presence of heterogeneous binding sites. The dominant interaction mechanisms consisted of surface complexation and electrostatic interaction, as verified by a combination of X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy analyses and density functional theory calculations. The results presented herein confirm the importance of CNF/LDH nanocomposites as emerging and promising materials for the efficient removal of heavy metal ions and other environmental pollutants.
Afficher plus [+] Moins [-]Photocatalysis of bisphenol A by an easy-settling titania/titanate composite: Effects of water chemistry factors, degradation pathway and theoretical calculation
2018
Zhao, Xiao | Du, Penghui | Cai, Zhengqing | Wang, Ting | Fu, Jie | Liu, Wen
Bisphenol A (BPA) is a widely concerned endocrine disrupting chemical and hard to be removed through conventional wastewater treatment processes. In this study, we developed a TiO2 decorated titanate nanotubes composite (TiO2/TNTs) and used for photocatalytic degradation of BPA. TEM and XRD analysis show that the TiO2/TNTs is a nano-composite of anatase and titanate, with anatase acting as the primary photocatalytic site and titanate as the skeleton. TiO2/TNTs exhibited excellent photocatalytic reactivity and its easy-settling property leaded to good reusability. After 5 reuse cycles, TiO2/TNTs also could photo-degrade 91.2% of BPA with a high rate constant (k1) of 0.039 min⁻¹, which was much better than TiO2 and TNTs. Higher pH facilitated photocatalysis due to more reactive oxygen species produced and less material aggregation. The presence of NaCl and CaCl2 showed negligible effects on BPA degradation, but NaHCO3 caused an inhibition effect resulting from consumption of ·OH. Humic acid inhibited degradation mainly due to blockage of the active sites of TiO2/TNTs. Degradation pathway was well interpreted through theoretical calculation. Hydroxyl radical played the dominate role in BPA photodegradation, and the atoms of BPA with high Fukui index based on density-functional theory (DFT) calculation are the radical easy-attacking (f⁰) sites. Considering the good photocatalytic reactivity, reusability, stability and settle property, TiO2/TNTs promises to be an efficient alternative for removal of organic compounds from wastewaters.
Afficher plus [+] Moins [-]Acute exposure to TiO2 nanoparticles produces minimal apparent effects on oyster, Crassostrea virginica (Gmelin), hemocytes
2018
Doyle, John J. | Ward, J Evan | Wikfors, Gary H.
The response of oyster (Crassostrea virginica) hemocytes was studied following exposure to anatase nanoparticles (ca. 7.4nm), surface-coated rutile nanocomposites (UV–Titan M212, ca. 86nm) and bulk titanium dioxide (TiO₂) particles (anatase and rutile crystalline forms; 0.4-0.5μm). Hemocytes were collected from oysters and exposed to one of the four particle types at concentrations of 0.1, 0.5, and 1.0mg/L under dark and environmentally-relevant light conditions for periods of two and four hours. Hemocyte mortality, phagocytosis, and reactive oxygen species (ROS) production were then evaluated using flow-cytometric assays. Bulk and nanoparticulate TiO₂ had little effect on viability of oyster hemocytes or on production of ROS. Significant changes in phagocytosis occurred after exposure to anatase nanoparticles for 4h under dark conditions, and UV–Titan for 2h under light conditions. Results demonstrate that TiO₂ particles (bulk or nanoscale) produce minimal effects on hemocyte biomarkers examined following acute, in vitro exposures.
Afficher plus [+] Moins [-]Silver@ graphene oxide nanocomposite: synthesize and application in removal of imidacloprid from contaminated waters
2018
Keshvardoostchokami, Mina | Bigverdi, Parastoo | Zamani, Abbasali | Parizanganeh, Abdolhosein | Piri, Farideh
Silver@graphene oxide nanocomposite was synthesized through an efficient approach, characterized by FTIR, EDX, and TEM instruments and then was used as adsorbent for imidacloprid removal from water in batch procedure. Effective variants such as contact time, pH, adsorbent dosage, and initial concentration of imidacloprid on procedure by two methods, one at a time and experimental design methods, were studied. Results in optimum conditions based on one at a time experiments is removal of 63% of the pesticide from 50 mL water containing 10 mg/L of imidacloprid by 0.03 g of the adsorbent at pH = 6.6 after 60 min while, experimental design method predict similarity results, 66% uptake of the poison by 0.06 g of the adsorbent in pH = 8. Kinetics and isotherm for adsorption processes follows Freundlich and pseudo-second-order models. Results confirm that Ag@graphene oxide nanocomposite can be applicable for removal of imidacloprid from real polluted water.
Afficher plus [+] Moins [-]Removal of Hazardous Hydrogen Fluoride (HF) from Water Through Homogeneous Nanostructured CaO-SiO2 Sorbents: Optimization of Binder
2018
Lim, Min-Hwa | Sadhasivam, T. | Jung, Do-Sung | Lim, Hankwon | Ryi, Shin-Kun | Jung, Ho-Young
In this study, we prepared a homogeneous dispersion of CaO-SiO₂ sorbent with advanced nanostructures as an efficient solid-reducing agent for the elimination of hazardous chemicals. The hydrophobic properties of SiO₂ ceramic particles are of interest for reducing the limitations and enhancing the chemical properties of highly hygroscopic materials. Nano-sized SiO₂ is introduced and composited with CaO through a facile synthetic route. The structural and microstructural characteristics and elemental compositional analyses confirm the uniform distribution of the CaO-SiO₂ nanocomposite. The as-prepared nanocomposites have particle sizes in the range of ~ 20–100 nm. Optimization of the composition reveals that the 60 wt% CaO-SiO₂ can be considered as an efficient solid-reducing agent for the hydrogen fluoride (HF) removal process. In order to identify the catalytic effect and binder ratio, the specific surface area and HF removal performance was investigated and compared to CaO-SiO₂ nanostructures with individual CaO catalyst. The higher amount of HF concentration was absorbed by CaO-SiO₂ catalyst than the CaO only. In the first 2.5-h reaction, the outlet HF concentration is rapidly increased to 380 ppm by using CaO catalyst as a HF sorbent. However, the outlet HF concentration is sluggishly increased up to 180 ppm, when nanostructured CaO-SiO₂ catalyst used as a sorbent in RE-RCS. It has been found that the addition of hydrophobic properties of SiO₂ has prevented the reaction between water/moisture and CaO in CaO-SiO₂ catalyst system, which is a major reason for enhancement in HF removal process. Furthermore, the CaF₂ byproduct can be effectively used in the ceramic industry and building material applications.
Afficher plus [+] Moins [-]Highly Efficient Cuprous Oxide Nanocrystals Assisted with Graphene for Decolorization Using Visible Light
2018
Liu, Shouheng | Yang, Sheng-Wei
The preparation of rhombic dodecahedral cuprous oxide (rdCu₂O) decorated with various amounts of reduced graphene oxide (rGO) is carried out by using a wet-chemical route. The resultant nanocomposites (denoted as rdCu₂O-xrGO, x = amounts of rGO) possess unique crystal facets of Cu₂O and superior electronic properties of rGO, which are tested as photocatalysts in the degradation of methyl orange (MO) under visible light irradiation. Among all the rdCu₂O-xrGO photocatalysts, the rdCu₂O-1rGO is found to degrade ca. 98% of MO in the presence of very low catalyst concentration (0.0625 g L⁻¹) within 120 min under visible light illumination. This obtained result may be owing to the well interfacial contact of rhombic dodecahedral Cu₂O nanoparticles with high electronic conductivity of rGO sheets that can increase the separation of photo-induced electron-hole pairs, stabilize the Cu₂O, and enhance MO adsorption, which are proofed by using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, photoluminescence, and UV-Vis diffuse reflection spectroscopy. Most importantly, these efficient photocatalysts can be reusable and retain surpassing photoactivity in terms of MO degradation after cyclic tests, which may provide a possible opportunity for practical applications in purifying wastewater via direct sunlight.
Afficher plus [+] Moins [-]Community Refinery Wastewater Photodegradation by Fe-Doped TiO2 Films
2018
Theerakarunwong, Chonlada Dechakiatkrai | Phothi, Rutairat
Photocatalytic treatment of real community wastewater using Fe-doped TiO₂ nanofilm was prepared by modified sol-gel method together with a simple dip-coating technique. The process was investigated in a home-made batch photoreactor. The as-prepared nanocomposite film was characterized by UV-Vis diffuse, XRD, BET, and Fe-SEM analysis. The poultry processing wastewater was collected from Nakhonsawan Municipality. Subsequently, the photocatalytic treatment of the wastewater was performed using a home-made photoreactor operated in batch mode to demonstrate the effects of Fe-dopant concentration with various layer numbers. The catalysts were irradiated using four lamps of 15 W power that emitted visible light and performed at room temperature. The samples were collected every 15 min and analyzed for biochemical oxygen demand (BOD) and chemical oxygen demand (COD) removal efficiency compared to pure TiO₂ nanofilm and direct photolysis. From the results, the mixture of rutile and anatase was obtained with the maximum specific surface area of 150.12 mg²/g and the average particle size of 39.95 nm for 3 layers of 0.15% wt/v Fe-doped TiO₂. The BOD and COD value at 90 min time treatment was presented to be 8.87 and 32 mg L⁻¹, respectively, in the presence of 0.15% wt/v Fe-doped TiO₂ film photocatalysts. Moreover, atomic absorption spectrometric result ensured that no Ti contamination was detected in all parts of plants after watering by the treated water. Hence, the photocatalytic treatment markedly improved the quality of the community wastewater.
Afficher plus [+] Moins [-]Antimicrobial and antifouling properties of versatile PPSU/carboxylated GO nanocomposite membrane against Gram-positive and Gram-negative bacteria and protein
2018
Shukla, Arun Kumar | Alam, Javed | Ansari, Mohammad Azam | Alhoshan, Mansour | Ali, Fekri Abdulraqeb Ahmed
Biofouling is a serious issue in membrane-based water and wastewater treatment as it critically compromises the efficacy of the water treatment processes. This investigation demonstrates the antimicrobial and antifouling properties of a nanocomposite membrane system composed of carboxyl-functionalized graphene oxide (COOH-GO) and polyphenylsulfone (PPSU). The PPSU/COOH-GO nanocomposite membrane exhibited excellent antimicrobial properties, achieving maximum bacteriostasis rates of 74.2% and 81.1% against the representative Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa, respectively) and 41.9% against the representative Gram-positive bacterium (Staphylococcus aureus). The PPSU/COOH-GO nanocomposite membrane inhibited the attachment, colonization, and the biofilm formation of three species. Antifouling was assessed through filtration experiments using a model foulant bovine serum albumin (BSA). The fouling mechanisms were investigated by Hermia’s models (complete blocking, intermediate blocking, standard blocking, and cake formation), and the analysis involved fitting the volumetric flux decline experimental data to models. The fouling study revealed a less irreversible fouling and increased flux recovery ratio for the PPSU/COOH-GO nanocomposite membrane. Complete blocking of pores and cake formation were the major fouling mechanisms for the membrane.
Afficher plus [+] Moins [-]