In acidic medium, hazardous heavy metals of lead-zinc tailing (LZT) are easily leachable and mobilizable. Thus, the hazard, amount, form, and complexity of the leached heavy metals under acidic precipitation become a major environmental concern. This work investigates the gangue minerals, toxicity, speciation, leaching characteristics of heavy metals in LZT under simulated acid rain, as well as immobilization effects and mechanisms using a sustainable binder. In LZT, dolomite, quartz, calcite, and muscovite are the main gangue minerals, tiny hazardous metallic minerals were absorbed in the surface. The results revealed that Pb, Zn, Cr, and Cd were the predominant harmful elements, particularly Pb and Zn. Zn is leached completely and is the concerned hazardous element under simulated acid rain. In the acid rain neutralization ability test, the amount of leachable Pb, Cr, Ca, and Si maintained in equilibrium, leached Zn, Cd, Al, and Mg depended on the addition of acid. Pb and Ca were sedimented in residues. Immobilization of Pb, Zn, Cr, and Cd depended on the stability of Ca(OH)₂/C–S–H of hydrates, and 70% LZTHP after curing 7 days can be used for some practical engineering projects. This work opens up deeply understandings for the leached heavy metals under acidic precipitation and improves the sustainable and safe in the field of immobilization of heavy metals.

Excessive copper (Cu) in contaminated soil and groundwater has attracted continuous attentions due to the bioaccumulation and durability. In this study, the feasibility of remediation of heavy metal pollution in soil and groundwater was investigated using hydroxyapatite/calcium silicate hydrate (HAP/C–S–H) recovered from phosphorus-rich wastewater in farmland. The results show that the pH has a strong effect on copper removal from Cu-contaminated groundwater but the impact of ion strength on the removal is weak. In general, high pH and low ion strength give better results in copper removal. Kinetic and isotherm data from the study fit well with Pseudo-second-order kinetic model and Langmuir isotherm model, respectively. The maximum adsorption capacity of HAP/C–S–H (138 mg/g) was higher than that of C–S–H (90.3 mg/g) when pH value, temperature, and ionic strength were 5, 308 K, and 0.01 M, respectively. Thermodynamics results indicate that Cu removal is a spontaneous and endothermic process. X-ray diffraction (XRD) results show that the mechanism of copper removal involves physical adsorption, chemical precipitation and ion exchange. For the remediation of Cu-contaminated soil, 76.3% of leachable copper was immobilized by HAP/C–S–H after 28 d. Acid soluble Cu, the main contributor to biotoxicity, decreased significantly while reducible and residual Cu increased. After immobilization, the acid neutralization capacity of the soil increased and the dissolution of copper was substantially reduced in near-neutral pH. It can be concluded that HAP/C–S–H is an effective, low-cost and eco-friendly reagent for in-situ remediation of heavy metal polluted soil and groundwater.

Oil-contaminated soils resulted from drilling activities can cause significant damages to the environment, especially for living organisms. Treatment and management of these soils are the necessity for environmental protection. The present study investigates the field study of seven oil-contaminated soils treated by different stabilization/solidification (S/S) methods, and the selection of the best treated site and treatment method. In this study, first, the ratios of consumed binders to the contaminated soils (w/w) and the treatment times for each unit of treated soils were evaluated. The ratios of consumed binders to the contaminated soils were between 6 and 10% and the treatment times for each unit of treated soils were between 4.1 and 18.5 min/m³. Physicochemical characteristics of treated soils were also determined. Although S/S methods didn’t change the water content of treated soils, they increased the porosity of soils. Unexpectedly, the cement-based S/S methods didn’t increase the pH of the treated soils. The highest and the lowest leaching of petroleum hydrocarbons was belonging to S/S using diatomaceous earth (DE) and the combination of Portland cement, sodium silicate and DE (CS-DE), respectively. The best acid neutralization capacity was obtained for soils treated using the combination of Portland cement and sodium silicate (CS). Based on the best-worst multi-criteria decision-making method (BWM-MCDM), the soils treated using CS-DE was select as the best. The BWM-MCDM can be used as an effective tool for the selection of the best alternative in all areas of environmental decontamination.

Acid mine drainage (AMD) is a global environmental issue. Conventionally, a number of active and passive remediation approaches are applied to treat and manage AMD. Case studies on remediation approaches applied in actual mining sites such as lime neutralization, bioremediation, wetlands and permeable reactive barriers provide an outlook on actual long-term implications of AMD remediation. Hence, in spite of available remediation approaches, AMD treatment remains a challenge. The need for sustainable AMD treatment approaches has led to much focus on water reuse and resource recovery. This review underscores (i) characteristics and implication of AMD, (ii) remediation approaches in mining sites, (iii) alternative treatment technologies for water reuse, and (iv) resource recovery. Specifically, the role of membrane processes and alternative treatment technologies to produce water for reuse from AMD is highlighted. Although membrane processes are favorable for water reuse, they cannot achieve resource recovery, specifically selective valuable metal recovery. The approach of integrated membrane and conventional treatment processes are especially promising for attaining both water reuse and recovery of resources such as sulfuric acid, metals and rare earth elements. Overall, this review provides insights in establishing reuse and resource recovery as the holistic approach towards sustainable AMD treatment. Finally, integrated technologies that deserve in depth future exploration is highlighted.

Acetochlor is a widely used chloroacetanilide herbicide and has posed environmental risks in soil and water due to its toxicity and high leaching capacity. Earthworm represents the dominant invertebrate in soil and can promote the decomposition of organic pollutants. The effect of earthworm on acetochlor degradation in soil was studied by soil column experiment with or without acetochlor and earthworm in sterile and natural soils. The degradation capacities of drilosphere components to acetochlor were investigated by microcosm experiments. Bacterial and fungal acetochlor degraders stimulated by earthworm were identified by high-throughput sequencing. The degradation kinetics of acetochlor suggested that both indigenous microorganisms and earthworm played important roles in acetochlor degradation. Acetochlor degradation was quicker in soil with earthworms than without earthworms, with the degradation rates increased by 62.3 ± 15.2% and 9.7 ± 1.7% in sterile and natural treatments respectively. The result was related to the neutralized pH, higher enzyme activities and enhanced soil microbial community diversity and richness in the presence of earthworms. Earthworm cast was the degradation hotpot in drilosphere and exhibited better anaerobic degradation capacity in microcosm experiments. The acetochlor degradation rate of cast in anaerobic environment was 12.0 ± 0.1% quicker than that in aerobic environment. Residual acetochlor in soil conferred a long-term impairment on fungal community, and this inhibition could be repaired by earthworm. Earthworm stimulated indigenous degraders like Sphingomonas and Microascales and carried suspected intestinal degraders like Mortierella and Escherichia_coli to degradation process. Cometabolism between nutrition cycle species and degraders in casts also contributed to its faster degradation rates. The study also presented some possible anaerobic degradation species like Rhodococcus, Pseudomonas_fulva and Methylobacillus.

Graphene oxide (GO) may strongly interact with toxic metal ions and mineral particles upon release into the soil environment. We evaluated the mutual effects between GO and Ni (Ni(II)) with regard to their adsorption and co-adsorption on two minerals (goethite and hematite) in aqueous phase. Results indicated that GO and Ni could mutually facilitate the adsorption of each other on both goethite and hematite over a wide pH range. Addition of Ni promoted GO co-adsorption mainly due to the increased positive charge of minerals and cation–π interactions, while the presence of GO enhanced Ni co-adsorption predominantly due to neutralization of positive charge and strong interaction with oxygen-containing functional groups on adsorbed GO. Increasing adsorption of GO and Ni on minerals as they coexist may thus reduce their mobility in soil. Extended X-ray absorption fine structure (EXAFS) spectroscopy data revealed that GO altered the microstructure of Ni on minerals, i.e., Ni formed edge-sharing surface species (at RNᵢ₋Fₑ∼3.2 Å) without GO, while a GO-bridging ternary surface complexes (at RNᵢ₋C∼2.49 Å and RNᵢ₋Fₑ∼4.23 Å) was formed with GO. These findings improved the understanding of potential fate and toxicity of GO as well as the partitioning processes of Ni ions in aquatic and soil environments.

Atmospheric deposition is an important pathway for moisture, nutrient, and pollutant exchange among the atmosphere, forest, and soils. Previous work has shown the importance of proximity to the forest edge to chemical fluxes in throughfall, but far less research has considered stemflow. This study examined the difference in acid neutralization capacity (ANC) of stemflow of nineteen Liriodendron tulipifera L. (yellow poplar) trees between the forest edge and interior in a rural area of northeastern Maryland. We measured ANC directly via potentiometric titration. Stemflow from trees at the forest edge was found to have significantly higher and more variable pH and ANC than in the forest interior (p < 0.01). No mathematical trend between ANC and distance to the forest edge was observed, indicating the importance of individual tree characteristics in stemflow production and chemistry. These results reaffirm the importance of stemflow for acid neutralization by deciduous tree species.

The pH change and the release of organic matter and metals from sediment, due to the potential CO₂ acidified seawater leakages from a CCS (Carbon Capture and Storage) site are presented. Column leaching test is used to simulate a scenario where a flow of acidified seawater is in contact with recent contaminated sediment. The behavior of pH, dissolved organic carbon (DOC) and metals As, Cd, Cr, Cu, Ni, Pb, Zn, with liquid to solid (L/S) ratio and pH is analyzed. A stepwise strategy using empirical expressions and a geochemical model was conducted to fit experimental release concentrations. Despite the neutralization capacity of the seawater-carbonate rich sediment system, important acidification and releases are expected at local scale at lower pH. The obtained results would be relevant as a line of evidence input of CCS risk assessment, in an International context where strategies to mitigate the climate change would be applied.

A nursery experiment was conducted to evaluate the potential role of arbuscular mycorrhizal (AM) fungi in encouraging the vegetation cover on bauxite residue (red mud) sites. An alkali tolerant bermudagrass (Cynodon dactylon) adapted to local conditions were grown in red mud with different amendments with and without AM fungi to assess mycorrhizal effects on plant growth, mineral nutrition, metal uptake and neutralization of bauxite residue. Inoculation of AM fungi significantly increased the plant growth, nutrient uptake and reduced Fe, Al accumulation in plant tissue and also improved the soil physico-chemical and biochemical properties. Gypsum and sludge amended treatments inoculated with AM fungi had maximum biomass, nutrient uptake and reduced accumulation of metals. The neutralization of red mud was significant in presence of AM fungi than control. The experiment provided evidence for the potential use of bermudagrass in combination with AM fungi for ecological restoration of bauxite residue sites.

Phosphogypsum (PG) is disposed worldwide in large stacks usually placed in coastal zones, as in the case of Huelva (SW of Spain), where around 100 Mt of PG are stored on the salt marshes of the Tinto River estuary covering a surface of about 1000 ha. This management generates the weathering of PG, and due to its high acidity (pH ≈ 2) and pollutant load can provoke significant emissions into their surroundings. In this work were evaluated by laboratory experiments the effects of pH increase in the behaviour of heavy metals and natural radionuclides during the mixing of phosphogypsum leachates with seawater.The acidic phosphogypsum leachates showed concentrations of heavy metals from two to three orders of magnitude higher than natural continental waters, and natural radionuclides (U-isotopes and ²¹⁰Po) from four to five orders of magnitude higher than unperturbed aquatic systems. Major elements and some heavy metals as Mn, Ni, Cd, As, Sb and Co showed a conservative behaviour during the neutralisation of the leachates with seawater, remaining in the liquid phase, while other ones as Al, Fe, Cr, Zn, Cu, Pb precipitated and/or were adsorbed onto the solid phase. The U-isotopes and ²¹⁰Po showed a clear non-conservative behaviour probably due to coprecipitation/adsorption processes onto the formed precipitates, but while ²¹⁰Po reached a total removal at pH ≈ 7, U- isotopes after a total removal at pH ≈ 5 returned into the liquid phase due to redissolution/desorption processes at near neutral pH.The formed precipitates, mainly composed by iron phosphates particles, showed heavy metal and natural radionuclide concentrations from one to three orders of magnitude higher than unperturbed soils. All these facts demonstrate the serious environmental impact produced by the PG stacks into their surroundings and the urgency of effective restoration measures.