Affiner votre recherche
Résultats 1-10 de 320
Concentration and leachability of N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD) and its quinone transformation product (6PPD-Q) in road dust collected in Tokyo, Japan
2022
Hiki, Kyoshiro | Yamamoto, Hiroshi
A recently identified chemical, 2-((4-Methylpentan-2-yl)amino)-5-(phenylamino)cyclohexa-2,5-diene-1,4-dione (6PPD-quinone; 6PPD-Q), is a transformation product of an additive used in the manufacture of tire rubber and causes acute lethality in coho salmon (Oncorhynchus kisutch) in urban watersheds. Despite its potential presence and ecotoxicity in receiving waters worldwide, information on the occurrence and fate of 6PPD-Q is limited. Here, we investigated the concentrations of 6PPD-Q and its parent chemical, 6PPD, in road dust collected from arterial and residential roads in Tokyo, Japan from May to October 2021. 6PPD-Q concentrations were highest from May to June, when atmospheric ozone concentrations are the highest in Japan; a correlation between 6PPD-Q and photochemical oxidants, as an alternative to ozone, corroborated this finding. We also found that 6PPD-Q concentrations at photochemical oxidant concentrations ranging from 35 to 47 ppbv were higher in dust collected from roads with high traffic volumes (i.e., arterial roads; median: 8.6 μg/g-OC) than in dust collected from roads with lower traffic volumes (i.e., residential roads; median: 6.3 μg/g-OC), indicating that 6PPD-Q is generated from traffic-related sources. We also found that 6PPD-Q was leached from dust particles within a few hours, with a log partitioning coefficient between organic carbon and water (KOC) of 3.2–3.5. The present results will help to understand the environmental occurrence, fate, and behavior of 6PPD-Q.
Afficher plus [+] Moins [-]Association of weather, air pollutants, and seasonal influenza with chronic obstructive pulmonary disease hospitalization risks
2022
Chong, Ka Chun | Chen, Yu | Chan, Emily Ying Yang | Lau, Steven Yuk Fai | Lam, Holly Ching Yu | Wang, Bin | Goggins, William Bernard | Ran, Jinjun | Zhao, Shi | Mohammad, Kirran N. | Wei, Yuchen
The influences of weather and air pollutants on chronic obstructive pulmonary disease (COPD) have been well-studied. However, the heterogeneous effects of different influenza viral infections, air pollution and weather on COPD admissions and re-admissions have not been thoroughly examined. In this study, we aimed to elucidate the relationships between meteorological variables, air pollutants, seasonal influenza, and hospital admissions and re-admissions due to COPD in Hong Kong, a non-industrial influenza epicenter. A total number of 507703 hospital admissions (i.e., index admissions) and 301728 re-admission episodes (i.e., episodes within 30 days after the previous discharge) for COPD over 14 years (1998–2011) were obtained from all public hospitals. The aggregated weekly numbers were matched with meteorological records and outdoor air pollutant concentrations. Type-specific and all-type influenza-like illness positive (ILI+) rates were used as proxies for influenza activity. Generalized additive models were used in conjunction with distributed-lag non-linear models to estimate the associations of interest. According to the results, high concentrations of fine particulate matter, oxidant gases, and cold weather were strong independent risk factors of COPD outcomes. The cumulative adjusted relative risks exhibited a monotone increasing trend except for ILI+ B, and the numbers were statistically significant over the entire observed range of ILI+ total and ILI+ A/H3N2 when the reference rate was zero. COPD hospitalization risk from influenza infection was higher in the elderly than that in the general population. In conclusion, our results suggest that health administrators should impose clean air policies, such as strengthening emissions control on petrol vehicles, to reduce pollution from oxidant gases and particulates. An extension of the influenza vaccination program for patients with COPD may need to be encouraged: for example, vaccination may be included in hospital discharge planning, particularly before the winter epidemic.
Afficher plus [+] Moins [-]Sustainable ferrate oxidation: Reaction chemistry, mechanisms and removal of pollutants in wastewater
2021
Dar, Afzal Ahmed | Pan, Bao | Qin, Jiani | Zhu, Qiuhui | Lichtfouse, Eric | ʻUs̲mān, Muḥammad | Wang, Chuanyi
This review is intended to evaluate the use of ferrate (Fe(VI)), being a green coagulant, sustainable and reactive oxidant, to remove micro pollutants especially pharmaceutical pollutants in contaminated water. After a brief description of advanced oxidation processes, fundamental dimensions regarding the nature, reactivity, and chemistry of this oxidant are summarized. The degradation of contaminants by Fe(VI) involves several mechanisms and reactive agents which are critically evaluated. The efficiency and chemistry of Fe(VI) oxidation differs according to the reaction conditions and activation agent, such as soluble Fe(VI) processes, which involve Fe(VI), UV light, and electro-Fe(VI) oxidation. Fe(VI) application methods (including single dose, multiple doses, chitosan coating etc), and Fe(VI) with activating agents (including sulfite, thiosulfate, and UV) are also described to degrade the micro pollutants. Besides, application of Fe(VI) to remove pharmaceuticals in wastewater are intensely studied. Electrochemical prepared Fe(VI) has more wide application than wet oxidation method. Meanwhile, we elaborated Fe(VI) performance, limitations, and proposed innovative aspects to improve its stability, such as the generation of Fe(III), synergetic effects, nanopores entrapment, and nanopores capsules. This study provides conclusive direction for synergetic oxidative technique to degrade the micro pollutants.
Afficher plus [+] Moins [-]Ferrate (VI)-mediated transformation of diethyl phthalate (DEP) in soil: Kinetics, degradation mechanisms and theoretical calculation
2021
Yu, Yao | Qi, Yumeng | Li, Chenguang | Cao, Wanming | Chen, Jing | Qu, Ruijuan | Zhou, Dongmei | Wang, Zunyao
Diethyl phthalate (DEP), as a kind of universally used plasticizer, has aroused considerable public concern owing to its wide detection, environmental stability, and potential health risks. In this work, the highly efficient removal of DEP by ferrate (VI) (Fe(VI)) was systematically explored in soil environment. The effects of the oxidant dosages, soil types, as well as the presence of coexisting cations and anions in tested soil on DEP removal were evaluated. When the dosage of Fe(VI) was 20 mM, complete removal of DEP (50 μg/g) was achieved in the tested soil after 2 min of reaction. Furthermore, the removal rate of DEP was closely related to the soil types, and the degradation rates were decreased obviously in red soil (RS), black soil (BS) and paddy soil (PS), probably due to the acidic condition and high content of organic matters. Moreover, the presence of Ca²⁺, Mg²⁺ and Al³⁺ in soil can inhibit the removal of DEP by Fe(VI), while SO₄²⁻ has an slightly promotion effect. Six oxidation intermediates were detected in the reaction process of DEP, product analysis revealed that the transformation of DEP was mainly through two pathways, including hydrolysis and hydroxylation reactions, which were probably mediated by oxygen atom transfer process of Fe(VI). Based on the frontier electron density theory calculation, two ester groups of DEP were prone to be attacked by Fe(VI), and the hydroxyl addition tended to occur at the para-position of one of the ester groups on the benzene ring. This study provides a novel approach for phthalate esters removal from soil using Fe(VI) oxidation and shows new insights into the oxidation mechanisms.
Afficher plus [+] Moins [-]In-depth investigation of Sodium percarbonate as oxidant of PAHs from soil contaminated with diesel oil
2021
Cavalcanti, Jorge Vinicius Fernandes Lima | Fraga, Tiago José Marques | Loureiro Leite, Mirella de Andrade | dos Santos e Silva, Daniella Fartes | de Lima, Valmir Félix | Schuler, Alexandre Ricardo Pereira | do Nascimento, Clístenes Williams Araújo | da Motta Sobrinho, Maurício Alves
Sodium percarbonate (SPC, 2Na₂CO₃∙3H₂O₂), is a compound that can be used under multiple environmental applications. In this work, SPC was employed as oxidant in the treatment of soil contaminated with diesel oil. The soil samples were collected during the earthmoving stage of RNEST Oil Refinery (Petrobras), Brazil. Then, the samples were air-dried, mixed and characterized. Subsequently, raw soil was contaminated with diesel and treated by photo-Fenton reaction (H₂O₂/Fe²⁺/UV). SPC played a significant role in the generation of hydroxyl radicals under the catalytic effect of ferrous ions (Fe²⁺), hydrogen peroxide (H₂O₂) and radiation. These radicals provoked the photodegradation of polycyclic aromatic hydrocarbons (PAHs), in the soil remediation. A factorial design 3³ was carried out to assess the variables which most influenced the decrease in total organic carbon (TOC). The study was performed with the following variables: initial concentration of [H₂O₂] and [Fe²⁺], between 190.0 and 950.0 mmol L⁻¹ and 0.0–14.4 mmol L⁻¹, respectively. UV radiation was supplied from sunlight, blacklight lamps, and system without radiation. All experiments were performed with 5.0 g of contaminated soil in 50.0 mL of solution. The initial concentration of Fe²⁺ showed the statistically most significant effect. The oxidation efficiency evaluated in the best condition showed a decrease from 34,765 mg kg⁻¹ to 15,801 mg kg⁻¹ in TOC and from 85.750 mg kg⁻¹ to 20.770 mg kg⁻¹ in PAHs content. Moreover, the sums of low and high molecular weight polycyclic aromatic hydrocarbons (LMW-PAHs and HMW-PAHs) were 19.537 mg kg⁻¹ and 1.233 mg kg⁻¹, respectively. Both values are within the limits recommended by the United Sates Environmental Protection Agency (USEPA) and evidenced the satisfactory removal of PAHs from contaminated soil, being an alternative to classic oxidation protocols.
Afficher plus [+] Moins [-]Synthesis and photocatalytic degradation activities of phosphorus containing ZnO microparticles under visible light irradiation for water treatment applications
2020
Saffari, Reyhaneh | Shariatinia, Zahra | Jourshabani, Milad
A series of phosphorus containing ZnO (P–ZnO) photocatalysts with various percentages of phosphorus were successfully synthesized using the hydrothermal method. The structural, physical and optical properties of the obtained microparticles were investigated using diverse techniques such as X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet–visible diffusion reflectance spectroscopy (UV–Vis DRS), photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and N₂ adsorption-desorption analysis. The photocatalytic activities of the pure and P–ZnO samples were evaluated for the degradation of Rhodamine B (RhB) under visible light irradiation. The parameters such as pH, catalyst dosage, contaminant concentration and effect of persulfate as an oxidant were studied. It was found that the P–ZnO1.8% photocatalyst could destroy 99% of RhB (5 ppm) in 180 min at pH = 7; furthermore, it degraded ∼100% of 5 and 10 ppm of the RhB pollutant in 120 and 180 min, respectively, only by adding 0.01 g of persulfate into the reaction solution. To determine the photocatalytic mechanism, 2-propanol, benzoquinone and EDTA were used and it was indicated that hydroxyl radicals, superoxide ions and holes, all had major roles in the photocatalytic degradation but the hydroxyl radical effect was the most significant. The phenol degradation was also investigated using the P–ZnO1.8% optimum photocatalyst which could destroy 53% of the phenol (5 ppm) in 180 min. According to the reusability test, it was proved that after 5 cycles, the catalyst activity was not highly changed and it was potentially capable of pollutant degradation.
Afficher plus [+] Moins [-]Long-term calibration models to estimate ozone concentrations with a metal oxide sensor
2020
Sayahi, Tofigh | Garff, Alicia | Quah, Timothy | Lê, Katrina | Becnel, Thomas | Powell, Kody M. | Gaillardon, Pierre-Emmanuel | Butterfield, Anthony E. | Kelly, Kerry E.
Ozone (O₃) is a potent oxidant associated with adverse health effects. Low-cost O₃ sensors, such as metal oxide (MO) sensors, can complement regulatory O₃ measurements and enhance the spatiotemporal resolution of measurements. However, the quality of MO sensor data remains a challenge. The University of Utah has a network of low-cost air quality sensors (called AirU) that primarily measures PM₂.₅ concentrations around the Salt Lake City valley (Utah, U.S.). The AirU package also contains a low-cost MO sensor ($8) that measures oxidizing/reducing species. These MO sensors exhibited excellent laboratory response to O₃ although they exhibited some intra-sensor variability. Field performance was evaluated by placing eight AirUs at two Division of Air Quality (DAQ) monitoring stations with O₃ federal equivalence methods for one year to develop long-term multiple linear regression (MLR) and artificial neural network (ANN) calibration models to predict O₃ concentrations. Six sensors served as train/test sets. The remaining two sensors served as a holdout set to evaluate the applicability of the new calibration models in predicting O₃ concentrations for other sensors of the same type. A rigorous variable selection method was also performed by least absolute shrinkage and selection operator (LASSO), MLR and ANN models. The variable selection indicated that the AirU’s MO oxidizing species and temperature measurements and DAQ’s solar radiation measurements were the most important variables. The MLR calibration model exhibited moderate performance (R² = 0.491), and the ANN exhibited good performance (R² = 0.767) for the holdout set. We also evaluated the performance of the MLR and ANN models in predicting O₃ for five months after the calibration period and the results showed moderate correlations (R²s of 0.427 and 0.567, respectively). These low-cost MO sensors combined with a long-term ANN calibration model can complement reference measurements to understand geospatial and temporal differences in O₃ levels.
Afficher plus [+] Moins [-]Regulation of coastal methane sinks by a structured gradient of microbial methane oxidizers
2019
He, Zhanfei | Wang, Jiaqi | Hu, Jiajie | Yu, Hanqing | Jetten, Mike S.M. | Liu, Huan | Cai, Chaoyang | Liu, Yan | Ren, Hongxing | Zhang, Xu | Hua, Miaolian | Xu, Xinhua | Zheng, Ping | Hu, Baolan
Coastal wetlands are widely recognized as atmospheric methane sources. However, recent field studies suggest that some coastal wetlands could also act as methane sinks, but the mechanism is not yet clear. Here, we investigated methane oxidation with different electron acceptors (i.e., oxygen, nitrate/nitrite, sulfate, Fe(III) and Mn(IV)) in four coastal wetlands in China using a combination of molecular biology methods and isotopic tracing technologies. The geochemical profiles and in situ Gibbs free energies suggest that there was significant nitrite-dependent anaerobic oxidation of methane (nitrite-AOM) in the sub-surface sediments; this was subsequently experimentally verified by both the microbial abundance and activity. Remarkably, the methanotrophic communities seemed to exist in the sediments as layered structures, and the surface aerobic methane-oxidizing bacteria were able to take up atmospheric methane at a rate of 0.10–0.18 nmol CH₄ day⁻¹ cm⁻², while most, if not all, sedimentary methane was being completely consumed by anaerobic methanotrophs (23–58% by methane oxidizers in phylum NC10). These results suggest that coastal methane sinks might be governed by diverse microbial communities where NC10 methane oxidizers contributed significantly. This finding helps to better understand and predict the coastal methane cycle and reduce uncertainties in the estimations of the global methane flux.
Afficher plus [+] Moins [-]Enhanced heterogeneous Fenton-like systems based on highly dispersed Fe0-Fe2O3 nanoparticles embedded ordered mesoporous carbon composite catalyst
2018
Wang, Jing | Liu, Chao | Qi, Junwen | Li, Jiansheng | Sun, Xiuyun | Shen, Jinyou | Han, Weiqing | Wang, Lianjun
Acceleration of Fe³⁺/Fe²⁺ cycle and simultaneous reduction of particle size with enhanced stability is extremely important for iron-based heterogeneous Fenton catalysts. In this work, Fe⁰-Fe₂O₃ composite nanoparticles embedded ordered mesoporous carbon hybrid materials (Fe⁰-Fe₂O₃/OMC) were rationally designed as efficient heterogeneous Fenton catalysts. Because of the confinement and reduction of OMC, highly dispersed Fe⁰-Fe₂O₃ active species with diameter of ∼8 nm were generated by an optimized carbothermic reduction process. In addition, Fe⁰-Fe₂O₃/OMC possesses ordered mesoporous structure with uniform mesopore, high surface area and pore volume. For comparison, two other catalysts, including solely Fe⁰ nanoparticles supported on ordered mesoporous carbon (Fe⁰/OMC) and solely Fe₂O₃ nanoparticles supported on ordered mesoporous carbon (Fe₂O₃/OMC) were also prepared. The Fenton catalytic performance of synthesized catalysts was evaluated by using H₂O₂ as oxidizing agent to degrade Acid Orange II (AOII). The results show that almost 98.1% of 100 mg L⁻¹ AOII was removed by Fe⁰-Fe₂O₃/OMC in condition of neutral pH and nearly room temperature, which is much higher than those of compared catalysts. The enhanced catalytic activity of Fe⁰-Fe₂O₃/OMC for AOII removal is due to the efficient electron transfer between the Fe⁰ and iron oxide and the accelerated Fe³⁺/Fe²⁺ cycle. The stability and reusability of the catalyst was also investigated, which showed a good performance even after five consecutive runs. The as-synthesized catalyst is proved to be an attractive candidate in heterogeneous Fenton chemistry and practical application.
Afficher plus [+] Moins [-]Large eddy simulation of reactive pollutants in a deep urban street canyon: Coupling dynamics with O3-NOx-VOC chemistry
2017
Zhong, Jian | Cai, Xiao-Ming | Bloss, William James
A large eddy simulation (LES) model coupled with O3-NOx-VOC chemistry is implemented to simulate the coupled effects of emissions, mixing and chemical pre-processing within an idealised deep (aspect ratio = 2) urban street canyon under a weak wind condition. Reactive pollutants exhibit significant spatial variations in the presence of two vertically aligned unsteady vortices formed in the canyon. Comparison of the LES results from two chemical schemes (simple NOx-O3 chemistry and a more comprehensive Reduced Chemical Scheme (RCS) chemical mechanism) shows that the concentrations of NO2 and Ox inside the street canyon are enhanced by approximately 30–40% via OH/HO2 chemistry. NO, NOx, O3, OH and HO2 are chemically consumed, while NO2 and Ox (total oxidant) are chemically produced within the canyon environment. Within-canyon pre-processing increases oxidant fluxes from the canyon to the overlying boundary layer, and this effect is greater for deeper street canyons (as found in many traditional European urban centres) than shallower (lower aspect ratio) streets. There is clear evidence of distinct behaviours for emitted chemical species and entrained chemical species, and positive (or negative) values of intensities of segregations are found between pairs of species with similar (or opposite) behaviour. The simplified two-box model underestimated NO and O3 levels, but overestimated NO2 levels for both the lower and upper canyon compared with the more realistic LES-chemistry model. This suggests that the segregation effect due to incomplete mixing reduces the chemical conversion rate of NO to NO2. This study reveals the impacts of nonlinear O3-NOx-VOC photochemical processes in the incomplete mixing environment and provides a better understanding of the pre-processing of emissions within canyons, prior to their release to the urban boundary layer, through the coupling of street canyon dynamics and chemistry.
Afficher plus [+] Moins [-]