The distribution of polycyclic aromatic hydrocarbons (PAHs) in the surface water and sediments in five regions of the Indian Sundarbans was assessed. The capability of microbial biofilm communities to sequester PAHs in a biofilm-promoting vessel was evaluated. The total PAH concentration of water and sediments ranged from undetectable to 125 ng ml⁻¹ and 4880 to 2 × 10⁴ ng g⁻¹ dry weight respectively. The total PAHs concentration of sediments exceeded the Effects Range–Low value and the recommended Effects Range-Median values, implying the PAHs might adversely affect the biota of the Sundarbans. Pyrogenic and petrogenic sources of PAH contamination were identified in most of the sampling sites. Indigenous biofilms were cultivated in a patented biofilm-promoting culture vessel containing liquid media spiked with 16 priority PAHs. Biofilm-mediated 97–100% removal efficiency of 16 PAHs was attained in all media. There was no significant difference between the mean residual PAH from the liquid media collected from hydrophobic and hydrophilic flasks. Residual amounts of acenaphthene (Ace), anthracene (Ant), benzo(b)fluoranthene [B(b)F], benzo(a)pyrene [B(a)P] and benzo(g,h,i)perylene [B(g,h,i)P] showed differences when cultivated in hydrophobic and hydrophilic flasks. The mean residual amounts of total PAHs extracted from biofilm biomasses were variable. A biofilm obtained from a specific sampling site cultured in the hydrophobic flask showed higher PAH sequestration when compared to the removal attained in the hydrophilic flask. Relative abundances of different microbial communities in PAH-sequestering biofilms revealed bacterial phyla including Proteobacteria, Bacteroidetes, Firmicutes, Actinobacteria, Chloroflexi and Planctomycetes as well as members of Ascomycota phylum of fungi. The dominance of Candida tropicalis, Clostridium butyricum, Sphingobacterium multivorum and Paecilomyces fulvus were established.

Two microbial isolates from oil polluted Red Sea water in Egypt, designated as RS-Y1 and RS-F3, were found capable of degrading Belayim mix (BX) crude oil. Strains RS-Y1 and RS-F3 were assigned to the genera Lipomyces tetrasporus and Paecilomyces variotii based on their morphological and physiological characteristics. Both isolates were compared for the biodegradation of crude petroleum-oil hydrocarbons in basal salt medium supplemented with 5% (w/v) of BX-crude oil. Gas chromatography profile showed that the biodegradation of total petroleum hydrocarbons (TPHs) inoculated with L. tetrasporus (68.3%) and P. variotii (58.15%) along with their consortium (66%) significantly reduced TPHs levels as compared to the control after 30days. L. tetrasporus (44.5%) was more effective than P. variotii strain (32.89%) in reducing the unresolved complex mixtures (UCM) content from the medium. Both isolates exhibited a strong growth over a wide range of salinity (5–45g/L NaCl).

Heavy metal accumulation in crop grains due to hazardous metal contamination is considered a great concern. However, phytobeneficial fungi are reported to have important abilities for the biosafety of crops grown in contaminated soil. Therefore, the current study was undertaken to explore the mutualistic association of plant growth-promoting endophytic fungi in reducing heavy metal concentration in the seeds of soybean plants subsequently grown in contaminated soil, without comprising seed quality and biochemical profile. The results revealed that endophytic Paecilomyces formosus LHL10 and Penicillium funiculosum LHL06 synergistically produced higher amounts of GAs and IAA in a co-cultured medium. Moreover, the co-inoculation of LHL06 and LHL10 to soybean plants grown under multi-metal toxic conditions significantly mitigated the adverse effects of heavy metal toxicity and increased the seed production (number of pods per plants, number of seeds per pod, and 100 seed weight) of soybean plants grown under control and multi-metal toxic conditions. Moreover, the levels of carbohydrates (glucose, sucrose, and fructose), minerals (iron, calcium, magnesium, and potassium), amino acids (serine, glutamic acids, glycine, methionine, lysine, arginine, and proline), and antioxidants (superoxide dismutase, catalase, and peroxidase) were significantly enhanced in sole and co-inoculated plants under control and stress conditions. Whereas organic acids (citric acid, tartaric acid, malic acid, and succinic acid), lipid peroxidation (MDA) products, multi-metal accumulation (nickel, cadmium, copper, lead, chromium, and aluminum), and stress-responsive endogenous abscisic acid levels were significantly decreased in seeds of soybean plants grown under control and multi-metal toxic conditions upon LHL06 and LHL10 sole and co-inoculation. The current results suggested the positive biochemical regulation in seeds for improving the nutritional status and making it safe for human consumption.

Fungi are one of the bioaerosols in indoor air of hospitals. They have adverse effects on staff and patients. The aim of this study was to investigate the effects of three incubation temperature on the density and composition of airborne fungi in an indoor and outdoor space of hospital. Sabouraud dextrose agar was used for culture the fungi. For improvement of aseptic properties, chloramphenicol was added to this medium. The density of airborne fungi was less than 282 CFU/m³. The highest density was detected in emergency room and the lowest of them was in neonatal intensive care unit (NICU) and operation room (OR). Results showed that fungi levels at 25 °C were higher than 37 and 15 °C (p = 0.006). In addition, ten different genera of fungi were identified in all departments. The predominant fungi were Fusarium spp., Penicillium spp., Paecilomyces spp., and Aspergillus niger. Moreover, the density and trend of distribution of Fusaruim spp. in the indoor space was directivity to outdoor space by ventilation system. The present study has provided that incubation temperature had effect on airborne fungi remarkably. We are suggested that more studies would be conducted on incubation temperature and other ambient factors on airborne fungi.

Polyamines such as triethylenetetramine (TETA) and other amine chelators are used in mineral processing applications. Formation of heavy metal complexes of these reagents as a by-product in effluent water is a recent environmental concern. In this study, Paecilomyces sp. was enriched from soil on TETA as the sole source of carbon and nitrogen and was found to degrade > 96 and 90% CuTETA complexes at initial concentrations of 0.32 and 0.79 mM respectively, following 96-h incubation. After destabilization, most of the copper (> 78%) was complexed extracellularly and the rest was associated with the cell. Mass spectroscopy results provided confirmation that copper re-complexed with small, extracellular, and organic molecules. There are no reports in the literature that Paecilomyces or any other organism can grow on TETA or CuTETA. This study is the first to show that biological destabilization of CuTETA complexes in mineral processing effluents is feasible.

A number of human health effects have been associated with exposure to metal removal fluids (MRFs). Multiple lines of research suggest that a newly identified organism, Mycobacterium immunogenum (MI), appears to have an etiologic role in hypersensitivity pneumonitis (HP) in case of MRFs exposed workers. However, our knowledge of this organism, other possible causative agents (e.g., Pseudomonads), and the microbial ecology of MRFs in general, is limited. In this study, culture-based methods and small subunit ribosomal RNA gene clone library approach were used to characterize microbial communities in MRF bulk fluid and associated biofilm samples collected from fluid systems in an automobile engine plant. PCR amplification data using universal primers indicate that all samples had bacterial and fungal contaminated. Five among 15 samples formed colonies on the Mycobacteria agar 7H9 suggesting the likely presence of Mycobacteria in these five samples. This observation was confirmed with PCR amplification of 16S rRNA gene fragment using Mycobacteria specific primers. Two additional samples, Biofilm-1 and Biofilm-3, were positive in PCR amplification for Mycobacteria, yet no colonies formed on the 7H9 cultivation agar plates. Real-time PCR was used to quantify the abundance of M. immunogenum in these samples, and the data showed that the copies of M. immunogenum 16S rRNA gene in the samples ranges from 4.33 × 10⁴ copy/ml to 4.61 × 10⁷ copy/ml. Clone library analysis revealed that Paecilomyces sp. and Acremonium sp. and Acremonium-like were dominant fungi in MRF samples. Various bacterial species from the major phylum of proteobacteria were found and Pseudomonas is the dominant bacterial genus in these samples. Mycobacteria (more specifically MI) were found in all biofilm samples, including biofilms collected from inside the MRF systems and from adjacent environmental surfaces, suggesting that biofilms may play an important role in microbial ecology in MRFs. Biofilms may provide a shield or sheltered microenvironment for the growth and/or colonization of Mycobacteria in MRFs.

The insecticide chlordecone is a contaminant found in most of the banana plantations in the French West Indies. This study aims to search for fungal populations able to grow on it. An Andosol heavily contaminated with chlordecone, perfused for 1 year in a soil–charcoal system, was used to conduct enrichment cultures. A total of 103 fungal strains able to grow on chlordecone-mineral salt medium were isolated, purified, and deposited in the MIAE collection (Microorganismes d'Intérêt Agro-Environnemental, UMR Agroécologie, Institut National de la Recherche Agronomique, Dijon, France). Internal transcribed spacer sequencing revealed that all isolated strains belonged to the Ascomycota phylum and gathered in 11 genera: Metacordyceps, Cordyceps, Pochonia, Acremonium, Fusarium, Paecilomyces, Ophiocordyceps, Purpureocillium, Bionectria, Penicillium, and Aspergillus. Among predominant species, only one isolate, Fusarium oxysporum MIAE01197, was able to grow in a liquid culture medium that contained chlordecone as sole carbon source. Chlordecone increased F. oxysporum MIAE01197 growth rate, attesting for its tolerance to this organochlorine. Moreover, F. oxysporum MIAE01197 exhibited a higher EC₅₀value than the reference strain F. oxysporum MIAE00047. This further suggests its adaptation to chlordecone tolerance up to 29.2 mg l⁻¹. Gas chromatography–mass spectrometry (GC-MS) analysis revealed that 40 % of chlordecone was dissipated in F. oxysporum MIAE01197 suspension culture. No chlordecone metabolite was detected by GC-MS. However, weak amount of¹⁴CO₂evolved from¹⁴C₁₀-chlordecone and¹⁴C₁₀-metabolites were observed. Sorption of¹⁴C₁₀-chlordecone onto fungal biomass followed a linear relationship (r² = 0.99) suggesting that it may also account for chlordecone dissipation in F. oxysporum MIAE01197 culture.

Removal of textile dyestuffs from aqueous solution by biosorption onto a dead fungal biomass isolated from acidic mine drainage in the Çanakkale Region of Turkey was investigated. The fungus was found to be a promising biosorbent and identified as Paecilomyces sp. The optimal conditions for bioremediation were as follows: pH, 2.0; initial dyestuff concentration, 50 mg l(-1) for Reactive Yellow 85 and Reactive Orange 12, and 75 mg l(-1) for Reactive Black 8; biomass dosage, 2 g l(-1) for Reactive Yellow 85, 3 g l(-1) for Reactive Orange 12, 4 g l(-1) for Reactive Black 8; temperature, 25 °C; and agitation rate, 100 rpm. Zeta potential measurements indicated an electrostatic interaction between the binding sites and dye anions. Fourier transform infrared spectroscopy showed that amine, hydroxyl, carbonyl, and amide bonds were involved in the dyestuff biosorption. A toxicity investigation was also carried out before and after the biosorption process. These results showed that the toxicities for the reactive dyestuffs in aqueous solutions after biosorption studies decreased. The Freundlich and Langmuir adsorption models were used for the mathematical description of the biosorption equilibrium, and isotherm constants were evaluated for each dyestuff. Equilibrium data of biosorption of RY85 and RO12 dyestuffs fitted well to both models at the studied concentration and temperature.