Wastewater treatment plants (WWTPs) are considered one of the important sources of aquatic/terrestrial microplastic (MP) pollution. Therefore, the abundance and properties of MPs in the wastewater and sludge of an urban WWTP in Bursa Turkey were investigated. The amount, properties, and removal of MPs were evaluated. The results showed that the average abundance of MPs was 135.3 ± 28.0 n/L in the influent and 8.5 ± 4.7 n/L in the effluent, with a 93.7% removal rate, MP was removed and transferred to the sludge. The daily MP amount released in the aquatic environment is calculated as 525 million MPs, and the annual amount is 1.9 × 10¹¹ MPs. The abundance of MPs in the sludge thickening and sludge filter cake is 17.9 ± 2.3 and 9.5 ± 2.3 n/g dry weight (dw), respectively. The sludge disposal amount of WWTP is 81.5 tons/day and the approximate amount of MP accumulated in the sludge per year is calculated as 2.8 × 10¹¹ MPs. In wastewater and sludge samples, fragment dominant shape, black main colour, and 500–1000 μm sizes are the most common size. The main MP types in wastewater samples at the influent are polypropylene (PP, 36.8%), polyethylene (PE, 31.0%), polystyrene (PS, 11.8%), polyethylene terephthalate (PET, 8.0%), and polyamide (PA, 7.1%), at the effluent (PE, 33.0%), (PP, 52.5%), and (PS, 8.2%). In the sludge cake, the distribution is (PE, 40.8%), (PP, 27.6%), (PS, 18.7%) and (PET, 8.0%). The results of this study show that MPs are removed from wastewater with high efficiency by treatment processes and a significant amount accumulates in the sludge. Therefore, it is suggested that to integrate advanced treatment processes into urban WWTPs and use effective sludge disposal management practices to reduce the amount of MP released into the environment with effluent and sludge.

Microplastics can have several negative consequences on a variety of organisms, and their prevalence in marine ecosystems has become a major concern. Researchers have recently focused their attention on the world's largest gulf, the Gulf of Mexico (GoM), to determine and assess the impact of microplastic pollution on various environmental compartments (i.e., water, sediment, and biota). This paper critically reviews the analytical methodologies as well as summarizes the distribution, accumulation, sources, and composition of microplastics in a handful of studies (n = 14) conducted in the Gulf of Mexico (GoM) covering countries like the USA (n = 10) and Mexico (n = 4). Current quality control measures with respect to sampling and microplastic extraction are summarized. Of 14 studies reviewed, 47% primarily focused on examining sediments for microplastics, with biota and water comprising 35% and 18%, respectively. The abundance ranged from 31.7 to 1392 items m⁻² and 60–1940 items kg⁻¹ in sediment, 12–381 particles L⁻¹ in water, and 1.31–4.7 particles per fish in biota. Irregular shaped fragments were the most abundant, followed by fiber, film, foam, hard, and beads etc. Different polymer types of microplastics have been found, including polyethylene, polypropylene, polystyrene, polyamide, nylon, and rayon etc. According to published research, 46 out of 100 fish thriving in this region are susceptible to microplastic ingestion. Although microplastic concentration in the GoM is among the highest found worldwide, the determination of microplastic contamination is still a growing field of research and methodological discrepancies largely limit the realization of establishing a baseline information on the microplastic abundance of the GoM. In this respect, considerable efforts must be dedicated towards evaluating their distribution and exposure levels; thereby, major challenges and future research directions are briefly discussed.

Microplastics are emerging contaminants and widely distributed in the environment. They are considered as a vector of numerous organic pollutants including antibiotics in aquatic environments and thereby influence their distribution and transport behaviors. However, the effects of microplastics on the environmental behavior of antibiotics in soils remain largely unclear. In this paper, the influence of polyamide (PA) microplastics on sorption and transport of the selected antibiotic [oxytetracycline (OTC)] in a sandy loamy soil was studied by performing batch and column experiments. Results show that PA microplastics increase the pH of reaction systems, which contributes to OTC sorption onto the tested soils. However, altering pH is not the key influencing mechanism because the overall sorption capacity decreases slightly after adding PA microplastics, which can be attributed to the dilution effect. Reduction of OTC sorption by adding microplastics promotes the migration of OTC in the tested soil, which could be demonstrated by the results of column experiments that the breakthrough of OTC occurs earlier with an increasing content of PA microplastics. According to the fitting parameters of HYDRUS−1D model, PA microplastics can affect the transport of OTC by altering the soil pore structure and dispersion coefficient. These results provide new insight into the interaction between microplastics and organic pollutants in soil environments.

Studies of microplastics (MPs) in remote, trans-boundary and alpine rivers are currently lacking. To understand the sinks and transport mechanisms of MPs, this study investigated the distributions and sources of MPs in the surface waters and sediments of five tributaries of the Koshi River (KR), a typical alpine river in the Himalayas between China and Nepal. Mean abundances of MPs in water and sediment were 202 ± 100 items/m³ and 58 ± 27 items/kg, dry weight, respectively. The upstream tributary, Pum Qu in China, had the smallest abundance of MPs, while the middle tributary, Sun Koshi in Nepal, had the greatest abundance. Compared to international values in rivers, contamination of the KR with MPs was low to moderate. Fibers represented 98% of all MP particles observed, which consisted of polyethylene, polyethyleneterephthalate, polyamide, polypropylene, and polystyrene. Blue and black MPs were prevalent, and small MPs (<1 mm) accounted for approximately 60% of all MPs. Atmospheric transmission and deposition were considered to be the principal sources of MPs in the upstream tributary. The results imply that point sources associated with mostly untreated sewage effluents and solid wastes from households, major settlements, towns, and cities were most important sources of MPs in the KR. Non-point sources from agricultural runoff and atmospheric transport and deposition in the middle stream tributaries also contribute a part of microplastics, while the least amount was from fishing in the downstream tributary. Urbanization, agriculture, traffic, and tourism contributed to pollution in the KR by MPs. Equations to predict abundances of MPs based on river altitudes revealed that different trends were affected by both natural and human factors within the KR basin. This study presents new insights into the magnitude of MP pollution of a remote alpine river and provides valuable data for developing MP monitoring and mitigation strategies in similar environments worldwide.

This study reports the shapes, dimensional classes, types and counts of microplastics (MPs) found in 23 individuals of N. norvegicus collected from two wild populations of the Adriatic Sea (Mediterranean basin). The focus was on three different anatomical compartments (gut, hepatopancreas and tail), which were analysed separately. MPs were found in all the investigated individuals with an average of about 17 MPs/individual. Fragments were predominant over fibers with a ratio of about 3:1. The majority of MPs were in the dimensional range 50–100 μm. The predominant polymers were polyester, polyamide 6, polyvinyl chloride and polyethylene, which together constitute about 61% of all the MPs found. Fragments were more concentrated in the hepatopancreas, with no significant difference between gut and tail, while fibers were more concentrated in the gut than in the tail with hepatopancreas somehow in between. The dimensional class of the MPs influences their anatomical distribution. There were no statistical differences among individuals from the two sampling sites. Sex of the individual did not influence the level of retained MPs, while length had a very marginal effect. The information reported here contributes to understanding of the possible risks linked to human consumption of different tissues from contaminated Norway lobsters.

As a new type of emerging pollutant in the ocean, microplastics have received global attention in recent years. Considering the increasing amount of human activities around the South China Sea, it is important to determine the current status of microplastic pollution in this region. In this study, we analyzed the abundance and distribution of microplastics at Zhubi Reef in the South China Sea. Microplastic abundance ranged from 1,400 to 8,100 items/m3 of surface water, which was much higher than the values reported from other ocean areas. About 80% of the microplastics were smaller than 0.5 mm in size. Fibers and pellets comprised the most common microplastic types. The dominant microplastics were transparent or blue in color. The main polymer types were polypropylene (25%) and polyamide (18%). In general, our results revealed Zhubi Reef was contaminated with microplastics, which were likely derived from the intensive fisheries in the area and emissions from coastal cities. This study also provides baseline data that are useful for additional studies of microplastics in the South China Sea.

Although evidence suggests the ubiquity of microplastics in the marine environment, our knowledge of its occurrence within remote habitats, such as the deep sea, is scarce. Furthermore, long term investigations of microplastic abundances are even more limited. Here we present a long-term study of the ingestion of microplastics by two deep-sea benthic invertebrates (Ophiomusium lymani and Hymenaster pellucidus) sampled over four decades. Specimens were collected between the years 1976–2015 from a repeat monitoring site >2000 m deep in the Rockall Trough, North East Atlantic. Microplastics were identified at a relatively consistent level throughout and therefore may have been present at this locality prior to 1976. Considering the mass production of plastics began in the 1940s - 50s our data suggest the relatively rapid occurrence of microplastics within the deep sea. Of the individuals examined (n = 153), 45% had ingested microplastics, of which fibres were most prevalent (95%). A total of eight different polymer types were isolated; polyamide and polyester were found in the highest concentrations and in the majority of years, while low-density polystyrene was only identified in 2015. This study provides an assessment of the historic occurrence of microplastics on the deep seafloor and presents a detailed quantification and characterisation of microplastics ingested by benthic species. Furthermore these data advance our knowledge on the long-term fate of microplastic in marine systems.

Microfiber is a subgroup of microplastics and accounts for a large proportion of microplastics in aquatic environment, especially in municipal effluents. The purpose of the present study was to quantify microfiber shedding from three most populate synthetic textile fabrics: polyester, polyamide, and acetate fabrics. The results showed that more microfibers were released after washing with a pulsator laundry machine than a platen laundry machine. The greatest number of microfibers was released from acetate fabric, which was up to 74,816 ± 10,656 microfibers/m2 per wash, although microfibers were shed from all materials. Moreover, an increasing trend was found in the number of microfibers shedding from synthetic fabrics with the washing temperature increasing, and greater microfiber release occurred when washing fabrics with detergent rather than with water alone. The lint filter bag equipped with the pulsator laundry machine retained the longer microfibers (>1000 μm), but not the shorter microfibers (<500 μm) instead of releasing into the drainage system. Our data suggested that microfibers released during washing of synthetic fabrics may be an important source of microfibers in aquatic environment due to the increasing production and use of synthetic fabrics globally. Thus, more efficient filtering bags or other technologies in household washing machines should be developed to prevent and reduce the release of microfibers from domestic washing.

Terrestrial environments are subject to extensive pollution by plastics and, based on the slow degradation of plastics, are likely to act as long term sinks for microplastic debris. Currently the hazards of microplastics in soil and the potential impacts on soil organisms is poorly understood. Particularly the role of particle characteristics, such a size or polymer type, in dose-response relationships for microplastics is not known. The aim of this study was to assess the ingestion and toxicity of nylon (polyamide) particles, in three different size ranges, to Enchytraeus crypticus in a soil exposure. Effects were also compared with those of polyvinyl chloride (PVC) particles, in a single size range. Nylon particle ingestion was confirmed using fluorescence microscopy, with greatest ingestion for particles in the smallest size range (13–18 μm). To investigate how particle size affected survival and reproduction, E. crypticus were exposed to nylon particles in two well-defined size ranges (13–18 and 90–150 μm) and concentrations of 20, 50, 90 and 120 g/kg (2–12% w/w). An intermediate nylon size range (63–90 μm) and a larger sized PVC particle (106–150 μm), both at 90 g/kg, were also tested. Survival was not affected by either of the polymer types or sizes. Reproduction was significantly reduced, in a dose-dependent manner, by the nylon particles at high exposure concentrations (>90 g/kg). Smaller size ranges (13–18 μm) had a greater effect compared to larger size ranges (>63 μm), with a calculated EC₅₀ for the 13–18 μm size range of 108 ± 8.5 g/kg. This greater hazard could be qualitatively linked with the ingestion of a greater number of smaller particles. This study highlights the potential for toxic effects of plastics in small size ranges to soil organisms at high exposure concentrations, providing understanding of the hazards microplastics may pose in the terrestrial environment.

Microplastics and antibiotics are two classes of emerging contaminants with proposed negative impacts to aqueous ecosystems. Adsorption of antibiotics on microplastics may result in their long-range transport and may cause compound combination effects. In this study, we investigated the adsorption of 5 antibiotics [sulfadiazine (SDZ), amoxicillin (AMX), tetracycline (TC), ciprofloxacin (CIP), and trimethoprim (TMP)] on 5 types of microplastics [polyethylene (PE), polystyrene (PS), polypropylene (PP), polyamide (PA), and polyvinyl chloride (PVC)] in the freshwater and seawater systems. Scanning Electron Microscope (SEM) and X-ray diffractometer (XRD) analysis revealed that microplastics have different surface characterizes and various degrees of crystalline. Adsorption isotherms demonstrated that PA had the strongest adsorption capacity for antibiotics with distribution coefficient (Kd) values ranged from 7.36 ± 0.257 to 756 ± 48.0 L kg−1 in the freshwater system, which can be attributed to its porous structure and hydrogen bonding. Relatively low adsorption capacity was observed on other four microplastics. The adsorption amounts of 5 antibiotics on PS, PE, PP, and PVC decreased in the order of CIP > AMX > TMP > SDZ > TC with Kf correlated positively with octanol-water partition coefficients (Log Kow). Comparing to freshwater system, adsorption capacity in seawater decreased significantly and no adsorption was observed for CIP and AMX. Our results indicated that commonly observed polyamide particles can serve as a carrier of antibiotics in the aquatic environment.