The m-aminophenol (m-AP) is a widely used industrial chemical, which enters water, soils, and sediments with waste emissions. A common soil metal oxide, birnessite (δ-MnO2), was found to mediate the transformation of m-AP with fast rates under acidic conditions. Because of the highly complexity of the m-AP transformation, mechanism-based models were taken to fit the transformation kinetic process of m-AP. The results indicated that the transformation of m-AP with δ-MnO2 could be described by precursor complex formation rate-limiting model. The oxidative transformation of m-AP on the surface of δ-MnO2 was highly dependent on reactant concentrations, pH, temperature, and other co-solutes. The UV-VIS absorbance and mass spectra analysis indicated that the pathway leading to m-AP transformation may be the polymerization through the coupling reaction. The m-AP radicals were likely to be coupled by the covalent bonding between unsubstituted C2, C4 or C6 atoms in the m-AP aromatic rings to form oligomers as revealed by the results of activation energy and mass spectra. Furthermore, the toxicity assessment of the transformation productions indicated that the toxicity of m-AP to the E. coli K-12 could be reduced by MnO2 mediated transformation. The results are helpful for understanding the environmental behavior and potential risk of m-AP in natural environment.

The present work reports microwave-assisted synthesis of SnO₂ nanoparticles via green route using Psidium Guajava extract. For the enhancement of catalytic activity, nanohybrids of SnO₂ were formulated using different ratios of polyaniline (PANI) via ultrasound-assisted chemical polymerization. Formation of nanohybrids was confirmed via IR and XPS studies. The UV–vis DRS spectra of PANI/SnO₂ revealed significant reduction in the optical band gap upon nanohybrid formation. Microwave-assisted catalytic efficiency of pure SnO₂, PANI, PANI/SnO₂ nanohybrids was investigated using DDT as a model persistent organic pollutant. The degradation efficiency of PANI/SnO₂ was found to increase with the increase in the loading of PANI. Around 87% of DDT degradation was achieved within a very short period of 12 min under microwave irradiation using PANI/SnO₂-50/50 as catalyst. The effect of DDT concentration was explored and the degradation efficiency of PANI/SnO₂-50/50 catalyst was noticed to be as high as 82% in presence of 100 mg/L of DDT. The effect of microwave power on the degradation efficiency revealed 79% degradation using the same nanohybrid when exposed to microwave irradiation for 5 min under 1110 W microwave power. Scavenging studies confirmed the generation of OH, O₂⁻ radicals. The fragments with m/z values as low as 86 and 70 were confirmed by LCMS analysis. Recyclability tests showed that PANI/SnO₂-50/50 nanohybrid exhibited 81% degradation of DDT (500 mg/L) even after the third cycle, which reflected high catalytic efficiency as well as remarkable stability of the catalyst. This green nanohybrid could therefore be effectively utilized for the rapid degradation of persistent organic pollutants.

Civilization development is associated with the use of plastic. When plastic was introduced to the market, it was assumed that it was less toxic than glass. Recently, it is known that plastics are serious ecological problem they, do not degrade and remain in the environment for hundreds of years.Plastic may be degraded into micro-particles < 5000 nm in diameter, and further into nanoparticles (NPs) < 100 nm in diameter. NPs have been detected in air, soil, water and sludge.One of the most commonly used plastics is polystyrene (PS) - a product of polymerization of styrene monomers. It is used for the production of styrofoam and other products like toys, CDs and cup covers. In vivo and in vitro studies have suggested that polystyrene nanoparticles (PS-NPs) may penetrate organisms through several routes i.e. skin, respiratory and digestive tracts. They can be deposited in living organisms and accumulate further along the food chain. NPs are surrounded by “protein corona” that allows them penetrating cellular membranes and interacting with cellular structures. Depending on the cell type, NPs may be transported through pinocytosis, phagocytosis, or be transported passively. Currently there are no studies that would indicate a carcinogenic potential of PS-NPs. On the other hand, the PS monomer (styrene) was classified by the International Agency for Research on Cancer (IARC) as a potentially carcinogenic substance (carcinogenicity class B2).Despite of the widespread use of plastics and the presence of plastic NPs of secondary or primary nature, there are no studies that would assess the effect of those substances on human organism. This study was aimed at the review of the literature data concerning the formation of PS-NPs in the environment, their accumulation along the food chain, and their potential adverse effects on organisms on living various organization levels.

The hexafluoropropylene-oxide-dimer-acid (GenX) is a short-chain perfluoroalkyl substance that was recently introduced following the phase out of PFOA, as an alternative for the process of polymerization. GenX was detected at high concentrations in rivers, drinking water and in sera of exposed workers and recent findings suggested its potential dangerousness for human health.Aim of the study was to assess the consequences of GenX exposure on in vitro thyroid cells with particular attention to the effects on cell-viability, proliferation, DNA-damage and in the thyroid-related genes expression.FRTL-5 rat-thyroid cell line were incubated with increasing concentrations of GenX for 24 h, 48 h and 72 h to assess cell viability by WST-1. DNA-damage was assessed by comet assay and further confirmed by micronucleus assay. The proliferation of survived cells was measured by staining with crystal violet and evaluation of its optical density after incubation with SDS. Changes in TTF-1, Pax8, Tg, TSH-R, NIS and TPO genes expression were evaluated by RT-PCR.GenX exposure reduced FRTL-5 viability in a time and dose-dependent manner (24 h: ANOVA F = 22.286; p < 0.001; 48 h: F = 43.253, p < 0.001; 72 h: F = 49.708, p < 0.001). Moreover, GenX exerted a genotoxic effect, as assessed by comet assay (significant increase in tail-length, olive-tail-moment and percentage of tail-DNA) and micronucleus assay, both at cytotoxic and non-cytotoxic concentrations. Exposure to GenX at concentrations non-cytotoxic exerted a significant lowering of the expression of the regulatory gene TTF-1 (p < 0.05 versus untreated) and higher expression of Pax-8 (p < 0.05 versus untreated) and a down-regulation of NIS (p < 0.05 versus untreated). In addition, cells survived to GenX exposure showed a reduced re-proliferation ability (24 h: ANOVA F = 11,941; p < 0,001; 48 h: F = 93.11; p < 0.001; 72 h F = 21.65; p < 0.001).The exposure to GenX produces several toxic effects on thyroid cells in vitro. GenX is able to promote DNA-damage and to affect the expression of thyroid transcription-factor genes.

Via the thermal sintering, a nanocrystalline IrO₂ coating was formed on the Ti substrate to successfully prepare a Ti/IrO₂ electrode. Based on the electrochemical analysis, the prepared Ti/IrO₂ electrode was found to have powerful oxidation effect on the organics in the TNT red water, where the nitro compound was oxidized through an irreversible electrochemical process at 0.6 V vs. SCE. According to the analysis of the nitro compound content, the UV–vis spectra, and the FTIR spectra of 2,4,6-trinitrotoluene (TNT) red water with electrolytic periods, the degradation mechanism of the dinitrotoluene sulfonate (DNTS) was developed. And the intermediates were characterized by UPLC-HRMS. The DNTS mainly occurred one electron transfer reaction on the Ti/IrO₂ electrode. At the early stage of the electrolysis, the polymerization of DNTS was mainly dominated. The generated polymer did not form a polymer film on the electrode surface, but instead it promoted a further reduction. After electrolyzing for 30 h, all NO₂ function group in the TNT red water was degraded completely.

Sealcoat is an emulsified coating product applied to asphalt to protect against surface weathering. Sealcoat products contain coal-tar (CT) or petroleum-derived residues and are a recognized source of polycyclic aromatic hydrocarbons (PAHs) in urban areas. Although the toxicity of urban runoff from CT-sealed asphalt is established, chemical characterization has focused more on PAHs and alkylated derivatives and less on polar transformation products. In this study, solid-phase extraction (SPE) was used to concentrate dissolved (<0.2 μm) species in runoff collected from asphalt surfaces sealed with CT pitch or steam-cracked petroleum (SCP) residues. CT-sealed surfaces released a 20-fold greater concentration of SPE-extractable compounds in runoff compared to SCP-sealed surfaces. Representative compounds were sorted into four groups: nitrogen heterocycles (azaarenes) and other oxygen- and sulfur-containing species (N HET); hydroxylated N heterocycles (hydroxylated N HET); the nonionic surfactant 2,4,7,9-tetramethyl-5-decyne-4,7-diol (TMDD); and styrene-acrylonitrile polymer byproducts (SAN Trimer). Species concentrations and weathering-related disappearance behavior differed among the four subgroups. While hydroxylated N HET concentrations decreased by 94% in runoff from CT-sealed surfaces 60 h after sealcoat application, SAN Trimer concentrations in CT and SCP runoff increased over time as polymerization progressed, illustrating the complex changes the chemicals in sealcoat undergo as it cures under environmentally-relevant conditions. Overall, this study shows that urban runoff collected from CT-sealed and SCP-sealed asphalt surfaces is a potential source of water-soluble contaminants with unknown long-term ecotoxicological effects to aquatic systems.

Oil pollution of waters is one of the most serious environmental problems globally. The long half-life and persistence within the environment makes oil particularly toxic and difficult to remediate. There is a significant need for efficient and cost-effective oil recovery technologies to be brought in to practice. In this study, we developed a facile and efficient magnetic separation method. The surface of 316L stainless steel nanoparticles was modified by plasma deposition of 1,7-octadiene and perfluorooctane, producing relatively hydrophobic coatings having water contact angles of 86 and 100°, respectively. Both coatings had high oil removal efficiency (ORE) of >99%. The captured oil could be easily separated by applying an external magnetic force. The ease of material preparation and separation from the water after the oil is captured, and its high ORE is a compelling argument for further development and optimization of the technology to possible utilization into practice. Furthermore, the capacity of plasma polymerization to deliver desired surface properties can extend the application of the technology to removing other chemical and biological contaminants from polluted waters.

A molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization using diclofenac (DFC) as a template. Binding characteristics of the MIP were evaluated using equilibrium binding experiments. Compared to the non-imprinted polymer (NIP), the MIP showed an outstanding affinity towards DFC in an aqueous solution with a binding site capacity (Qₘₐₓ) of 324.8mg/g and a dissociation constant (Kd) of 3.99mg/L. The feasibility of removing DFC from natural water by the MIP was demonstrated by using river water spiked with DFC. Effects of pH and humic acid on the selectivity and adsorption capacity of MIP were evaluated in detail. MIP had better selectivity and higher adsorption efficiency for DFC as compared to that of powdered activated carbon (PAC). In addition, MIP reusability was demonstrated for at least 12 repeated cycles without significant loss in performance, which is a definite advantage over single-use activated carbon.

Based on the application of sediment microbial fuel cell (SMFC) in the bioremediation of sediment, this study used the sediment microbial fuel cell technology as the leading reactor. Modification of anode carbon felts (CF) by synthesis of PANI/MnO₂ composited to improve the electrical performance of the sediment microbial fuel cell. This study investigated the degradation effects, degradation pathways of the specific contaminant enrofloxacin and microbial community structure in sediment microbial fuel cell systems. The results showed that the sediment microbial fuel cell system with modified anode carbon felt (PANI-MnO₂/CF) prepared by in-situ chemical polymerization had the best power production performance. The maximum output voltage was 602 mV and the maximum power density was 165.09 mW m⁻². The low concentrations of enrofloxacin (12.81 ng g⁻¹) were effectively degraded by the sediment microbial fuel cell system with a removal rate of 59.52%.

Soil and groundwater contamination with potentially toxic elements (PTEs) including cadmium (Cd) and copper (Cu) has become a serious problem for ecosystem functioning. Silicon (Si) may precipitate these metals as silicates, and may also form, at undersaturation of silicates, ‘Si-contaminant compounds’, i.e. particles of polymerized silica with PTEs incorporated or adsorbed by inner-sphere complexes. While the formation of these compounds in aqueous solution has been proven, their formation in soil remains unclear yet. Therefore, we conducted column experiments with a topsoil horizon artificially contaminated with Cd or Cu solutions (10 mM) in the presence (10 mM) and absence of monomeric Si, and monitored the elemental composition of the eluates during 12 irrigation steps with artificial rainwater by microwave-plasma atomic emission spectrometry, the size and charge of the particles eluted by dynamic light scattering and phase analysis light scattering, and determined the spatial distribution of total and exchangeable Cd and Cu in soil after the experiments. When Si was previously applied to soil, significantly larger particles (up to > 200 nm) in the eluates indicated Si polymerization and formation of Si-contaminant compounds. However, Cd and Cu concentrations were very low (<0.4 μM), pointing to efficient retardation in soil. In any variant, the particles formed were slightly negatively charged (−11 mV). The molar metal:Si ratios in the eluates and significant correlations between the amounts of Si and metals in soil extracted by NH₄NO₃ pointed to the formation of Si-contaminant compounds, too. More Cu than Cd was retained in soil, and significantly more in the presence of Si, but less Cu than Cd was in exchangeable form. While particularly Cu formed Si-contaminant compounds, which reduced the concentration of Cu ions, the Si-contaminant-compound particles in the eluates remained very small, thus potentially susceptible to particulate export from soil into the groundwater.