Raman imaging can effectively characterise microplastics and nanoplastics, which is validated here to capture the items released from the plastic gloves when subjected to a mimicked fire. During the COVID-19 pandemic, large quantities of personal protective equipment (PPE) units have been used, such as the disposable gloves. If discarded and poorly managed, plastics gloves might break down to release secondary contaminants. The breakdown process can be accelerated by burning in a bushfire or at the incineration plants. During the burning process, the functional groups on the surface can be burned differently due to their different thermal stabilities. The different degrees of burning can be distinguished and visualised via Raman imaging. In the meantime, at the bottom of the burned plastics, microplastics and nanoplastics can be generated at a significant amount. The possible false Raman imaging on microplastics and nanoplastics is also discussed, by effectively extracting and distinguishing the weak signal from the background or noise. Overall, these findings confirm the importance of effectively working waste incineration plants and litter prevention, and suggest that Raman imaging is a suitable approach to characterise microplastics and nanoplastics.

The COVID-19 pandemic has resulted in an unprecedented surge of production, consumption, and disposal of personal protective equipment (PPE) including face masks, disposable gloves, and disinfectant wipes, which are often made of single use plastic. Widespread public use of these items has imposed pressure on municipalities to properly collect and dispose of potentially infectious PPE. There has been a lack of structured monitoring efforts to quantify the emerging trend of improperly disposed of PPE debris. In this study, we present a baseline monitoring survey to describe the spatial distribution of PPE debris during the COVID-19 pandemic from the metropolitan city of Toronto, Canada. Our objectives were to: (1) quantify PPE debris types among surveyed areas and; (2) identify PPE debris densities and accumulation of surveyed areas. A total of 1306 PPE debris items were documented, with the majority being disposable gloves (44%), followed by face masks (31%), and disinfecting wipes (25%). Of the face masks, 97% were designed for single use while only 3% were reusable. Of the surveyed locations, the highest daily average densities of PPE debris were recorded in the large and medium-sized grocery store parking lots and the hospital district (0.00475 items/m², 0.00160 items/m², and 0.00133 items/m² respectively). The two surveyed residential areas had the following highest PPE densities (0.00029 items/m² and 0.00027 items/m²), while the recreational trail had the lowest densities (0.00020 items/m²). Assuming a business-as-usual accumulation, an estimated 14,298 PPE items will be leaked as debris in just the surveyed areas annually. To facilitate proper disposal of PPE debris by the public we recommend development of municipal efforts to improve PPE collection methods that are informed by the described PPE waste pathways.

Nail salon technicians face chronic exposure to volatile organic compounds (VOCs), which can lead to adverse health outcomes including cancer. In this study, indoor levels of formaldehyde, as well as benzene, toluene, ethylbenzene and xylene, were measured in 6 Colorado nail salons. Personal exposure VOC measurements and health questionnaires (n = 20) were also performed; questionnaires included employee demographics, health symptoms experienced, and protective equipment used. Cancer slope factors from the United States Environmental Protection Agency (US EPA) and anthropometric data from the Centers for Disease Control and Prevention were then used to estimate cancer risk for workers, assuming 20-yr exposures to concentrations of benzene and formaldehyde reported here. Results show that 70% of surveyed workers experienced at least one health issue related to their employment, with many reporting multiple related symptoms. Indoor concentrations of formaldehyde ranged from 5.32 to 20.6 μg m−3, across all 6 salons. Indoor concentrations of toluene ranged from 26.7 to 816 μg m−3, followed by benzene (3.13–51.8 μg m−3), xylenes (5.16–34.6 μg m−3), and ethylbenzene (1.65–9.52 μg m−3). Formaldehyde levels measured in one salon exceeded the Recommended Exposure Limit from the National Institute for Occupational Safety and Health. Cancer risk estimates from formaldehyde exposure exceeded the US EPA de minimis risk level (1 × 10−6) for squamous cell carcinoma, nasopharyngeal cancer, Hodgkin's lymphoma, and leukemia; leukemia risk exceeded 1 × 10−4 in one salon. The average leukemia risk from benzene exposure also exceeded the US EPA de minimis risk level for all demographic categories modeled. In general, concentrations of aromatic compounds measured here were comparable to those measured in studies of oil refinery and auto garage workers. Cancer risk models determined that 20-yr exposure to formaldehyde and benzene concentrations measured in this study will significantly increase worker's risk of developing cancer in their lifetime.

The rise in the use of single-use plastics and personal protective equipment (PPE) has increased plastic waste in the marine environment. In this study, we surveyed the presence of PPE (face masks and gloves) discharged in 6 beaches along the coast of India. A total of 496 PPE were counted with an average density of 1.08 × 10⁻³ PPE m⁻². The PPE density found was comparable to previous studies. Face masks were the most recorded type of PPE (98.39%), with gloves accounting for only 1.61% of the total. However, a significant reduction in the appearance of PPE was recorded on all six beaches, likely due to the increase in vaccination rates. The most contaminated places were the beaches with recreational activities + fishing. It has been noticed that the lack of awareness of environmental pollution and the negligence of the population and the mismanagement of municipal waste are the main causes of beach pollution by PPE. This study confirms the potential threat of PPE to terrestrial and aquatic organisms of multiple taxa in India, but further studies are needed to quantify the impact of this type of waste on marine animals.

Investigations of the physicochemical degradation of personal protective equipment (PPE) under controlled environmental conditions are largely lacking. Here the chemical and physical changes of face masks and gloves (recovered from the marine environment) were evaluated after exposure time up to 60 days of simulated environmental conditions. The results suggested that the polymer backbone of PPE suffers typical changes induced by sun exposure. Changes in the intensity of diffraction peaks indicated shifts in the crystallinity of PPE, possibly altering their thermal behavior. Signs of physical degradation in PPE, such as ruptures, and rough surfaces, which exacerbated over time were also detected. Additionally, signals of some elements of concern, such as Cu and Mo, and elements typically found in seawater were detected. The results of this study allowed us to better understand the degradation of typical PPE items in the marine environment, ultimately resulting in the release of microplastics and chemical contaminants.

Anthropogenic activities experienced a pause due to the nationwide lockdown, imposed to contain the rapid spread of COVID-19 in the third week of March 2020. The impacts of suspension of industrial activities, vehicular transport and other businesses for three months (25 March-30 June) on the environmental settings of Chennai, a coastal megacity was assessed. A significant reduction in the key urban air pollutants [PM₂.₅ (66.5%), PM₁₀ (39.5%), NO₂ (94.1%), CO (29%), O₃ (45.3%)] was recorded as an immediate consequence of the reduced anthropogenic activities. Comparison of water quality of an urban river Adyar, between pre-lockdown and lockdown, showed a substantial drop in the dissolved inorganic N (47%) and suspended particulate matter (41%) during the latter period. During the pandemic, biomedical wastes in India showed an overall surge of 17%, which were predominantly plastic. FTIR-ATR analysis confirmed the polymers such as polypropylene (25.4%) and polyester (15.4%) in the personal protective equipment.

The extensive use of personal protective equipment (PPE) driven by the COVID-19 pandemic has become an important contributor to marine plastic pollution. However, there are very few studies quantifying and characterizing this type of pollution in coastal areas. In the present study, we monitored the occurrence of PPE (face masks, bouffant caps, and gloves) discarded in 13 sites along Cox's Bazar beach, the longest naturally occurring beach in the world. The vast majority of the items were face masks (97.9%), and the mean PPE density across sites was 6.29 × 10⁻³ PPE m⁻². The presence of illegal dumping sites was the main source of PPE, which was mainly located on touristic/recreational beaches. Fishing activity contributed to PPE pollution at a lower level. Poor solid waste management practices in Cox's Bazar demonstrated to be a major driver of PPE pollution. The potential solutions and sustainable alternatives were discussed.

On 10 August 2021, a face mask (14 cm × 9 cm) was found in the feces of a juvenile green turtle, by-caught alive in a set net off the northeast coast of Japan. Although sea turtles have been monitored in this region over the last 15 years (n = 76), face masks had never been found before the Covid-19 pandemic and this is the first detection. Fourier-transform infrared spectroscopy identified the mask as polypropylene. Estrogenic active benzotriazole-type UV stabilizers such as UV329 were detected in commercially available polypropylene face masks. Exposure of marine organisms ingesting plastics to endocrine-disrupting chemicals and physical injury are of concern. This study indicates that changes in human life in the pandemic are beginning to affect marine life. Precautionary actions including establishment of appropriate waste management of personal protective equipment and use of safe additives are urgently needed.

The emergence of the COVID-19 pandemic has caused worldwide health constraints. This study was conducted to establish a baseline monitoring survey to describe the distribution of PPE litters during the COVID-19 pandemic in the province of Palawan, Philippines. A total of 386 COVID-19-related PPE items were present in 83 % of coastal sampling sites with over a cumulative area of 48,200 m², with a density of 8 × 10⁻³ items m⁻². The facemask (98 %; n = 377) was the primary type of PPE, followed by face shield (2 %; n = 9). Meanwhile, the daily density of PPE litters in San Manuel, Puerto Princesa ranged from 0 to 9.9 × 10⁻² items m⁻², with a mean density of 8 × 10⁻³ items m⁻². The accumulation rates of PPE items ranged from 3.27 × 10⁻¹ items to 1.143 items d⁻¹, with an average rate of 7.29 × 10⁻¹ items d⁻¹.

Plastic pollution has become a serious transboundary challenge to nature and human health, with estimation of reports published — predicting a twofold increase in plastic waste by 2030. However, due to the COVID-19 pandemic, the excessive use of single-use plastics (including face masks, gloves and personal protective equipment) would possibly exacerbate such forecasts. The transition towards eco-friendly alternatives like bio-based plastics and new emerging sustainable technologies would be vital to deal with future pandemics, even though the use or consumption of plastics has greatly enhanced our quality of life; it is however critical to move towards bioplastics. We cannot deny the fact that bioplastics have some challenges and shortcomings, but still, it is an ideal option for opt. The circular economy is the need of the hour for waste management. Along with all these practices, individual accountability, corporate intervention and government policy are also needed to prevent us from moving from one crisis to the next. Only through cumulative efforts, we will be able to cope up with this problem. This article collected scattered information and data about accumulation of plastic during COVID-19 worldwide. Additionally, this paper illustrates the substitution of petroleum-based plastics with bio-based plastics. Different aspects are discussed, ranging from advantages to challenges in the way of bioplastics.