A pot experiment was carried out in the green house of Bangladesh Jute Research Institute (BJRI), Dhaka to study the response of jute (Corchorus capsularies and Corchorus olitorius) to the accumulation of As from soil to plants when various rates of As were applied. In the experiment, four treatments of arsenic (control, 10, 20 and 40 mg/kg) were applied. The salt sodium meta-arsenite (NaAsO2) was used as a source of As. Three jute varieties of CVL-1, 0-9897 and OM-1 were used.  CVL-1 variety is As sensitive whereas the 0-9897 and OM-1 varieties appeared to be As tolerant and OM-1 takes up the highest amount of As. Arsenic will be ingested into the body exceeding the maximum allowable daily limit (0.22mg/kg per day) through the consumption of 100g of jute leaves of these three varieties per day. Accumulation of As at 10 and 40 mg/kg treatment, the maximum was observed at 52 days harvest for CVL-1 while for the other two treatments, the maximum was observed at 42 days of growth. In the case of 0-9897 and OM-1 varieties, overall the maximum accumulation of As was observed at 42 days of growth at 40 mg/kg treatment.

International audience | It is essential to monitor pesticides in soils as their presence at trace levels and their bioavailability can induce adverse effects on soil's ecosystems, animals, and human health. In this study, we developed an analytical method for the quantification of traces of multi-class pesticides in soil using liquid chromatography-tandem mass spectrometry. In this way, 31 pesticides were selected, including 12 herbicides, 9 insecticides, and 10 fungicides. Two extraction techniques were first evaluated namely: the pressurized liquid extraction and the QuEChERS procedure. The latest one was finally selected and optimized, allowing extraction recoveries of 55 to 118 %. The addition of the chelating agent EDTA, which binds preferentially to soil cations that complex some pesticides, facilitates their extraction. Coupled with liquid chromatography-tandem mass spectrometry, the procedure displayed very high sensitivity, with limits of quantification (LOQ) in the range 0.01-5.5 ng/g. A good linearity (R² >0.992) was observed over two orders of magnitude (LOQ-100×LOQ) with good accuracy (80%-120 %) for all compounds except the two pyrethroids lambda-cyhalothrin and tau-fluvalinate (accuracy comprised between 50 and 175%) and the cyclohexanedione cycloxydim (accuracy<35%). Good repeatability and reproducibility were also achieved. The method was finally successfully applied to 12 soil samples collected from 3 land-use types. Among the 31-targeted pesticides, 24 were detected at least once, with concentration levels varying from LOQ to 722 ng/g. Many values were below 0.5 ng/g, indicating that the developed method could provide new knowledge on the extremely low residual contents of some pesticides.

The present study investigated that the potential of soil or foliar applied 15 mg/L zinc oxide quantum dots (ZnO QD, 11.7 nm) to enhance pumpkin (Cucurbita moschata Duch.) growth and biomass in comparison with the equivalent concentrations of other sizes of ZnO particles, ZnO nanoparticles (ZnO NPs, 43.3 nm) and ZnO bulk particles (ZnO BPs, 496.7 nm). In addition, ZnSO4 was used to set a Zn²⁺ ionic control. For foliar exposure, ZnO QD increased dry mass by 56% relative to the controls and values were 17.3% greater than that of the ZnO NPs particles. The cumulative water loss in the ZnO QD treatment was 10% greater than with ZnO NPs, suggesting that QD could better enhance pumpkin growth. For the root exposure, biomass and accumulative water loss equivalent across all Zn treatments. No adverse effects in terms of pigment (chlorophyll and anthocyanin) contents were evident across all Zn types regardless exposure routes. Foliar exposure to ZnO QD caused 40% increases in shoot Zn content as compared to the control; the highest Zn content was evident in the Zn²⁺ ionic treatment, although this did not lead to growth enhancement. In addition, the shoot and root content of other macro- and micro-nutrients were largely equivalent across all the treatments. The contents of other nutritional compounds, including amino acids, total protein and sugar, were also significantly increased by foliar exposure of ZnO QD. The total protein in the ZnO QD was 53% higher than the ZnO particle treatments in the root exposure group. Taken together, our findings suggest that ZnO QDs have significant potential as a novel and sustainable nano-enabled agrichemical and strategies should be developed to optimize benefit conferred to amended crops.

Surfactant-enhanced remediation (SER) is one of the most effective methods for petroleum hydrocarbon-contaminated sites compared to single physical and chemical methods. However, biosurfactants are not as commonly used as chemical surfactants, and the actual remediation effects and related mechanisms remain undefined. Therefore, to comprehensively compare the remediation effects and biological mechanisms of biosurfactants and chemical surfactants, soil column leaching experiments including two biosurfactants (rhamnolipids and lipopeptide) and three commercially used chemical surfactants (Tween 80, Triton X-100, and Berol 226SA) were conducted. After seven days of leaching, rhamnolipids exhibited the highest petroleum hydrocarbon removal rate of 61.01%, which was superior to that of chemical surfactants (11.73–18.75%) in n-alkanes C10–C30. Meanwhile, rhamnolipids exhibited a great degradation advantage of n-alkanes C13–C28, which was 1.22–30.55 times that of chemical surfactants. Compared to chemical surfactants, biosurfactants significantly upregulated the soil's biological functions, including soil conductivity (80.90–155.56%), and soil enzyme activities of lipase (90.31–497.10%), dehydrogenase (325.00–655.56%), core enzyme activities of petroleum hydrocarbon degradation, and quorum sensing between species. Biosurfactants significantly changed the composition of Pseudomonas, Citrobacter, Acidobacteriota, and Enterobacter at the genus level. Meanwhile, chemical surfactants had less influence on the bacterial community and interactions between species. Moreover, the biosurfactants enhanced the microbial interactions and centrality of petroleum hydrocarbon degraders in the community based on the network. Overall, this work provides a systematic comparison and understanding of the chemical- and bio-surfactants used in bioremediation. In the future, we intend to apply biosurfactants to practical petroleum hydrocarbon-contaminated fields to observe realistic remediation effects and compare their functional mechanisms.

Use of per- and polyfluoroalkyl substance (PFAS)-containing aqueous film-forming foams (AFFF) at firefighting training sites (FFTS) has been linked to PFAS contamination of drinking water. This study investigated PFAS transport and distribution in an urban groundwater aquifer used for drinking water production that has been affected by PFAS-containing AFFF. Soil, sediment, surface water and drinking water were sampled. In soil (n = 12) at a FFTS with high perfluorooctane sulfonate (PFOS) content (87% of ∑PFAS), the ∑PFAS concentration (n = 26) ranged from below detection limit to 560 ng g⁻¹ dry weight. In groundwater (n = 28), the ∑PFAS concentration near a military airbase FFTS reached 1000 ng L⁻¹. Principal component analysis (PCA) identified the military FFTS as the main source of PFAS contamination in drinking water wellfields >10 km down-gradient. Groundwater samples taken close to the military FFTS site showed no ∑PFAS concentration change between 2013 and 2021, while a location further down-gradient showed a transitory 99.6% decrease. Correlation analysis on PFAS composition profile indicated that this decrease was likely caused by dilution from an adjacent conflating aquifer. ∑PFAS concentration reached 15 ng L⁻¹ (PFOS 47% and PFHxS 41% of ∑PFAS) in surface river water (n = 6) and ranged between 1 ng L⁻¹ and 8 ng L⁻¹ (PFHxS 73% and PFBS 17% of ∑PFAS) in drinking water (n = 4). Drinking water had lower PFAS concentrations than the wellfields due to PFAS removal at the water treatment plant. This demonstrates the importance of monitoring PFAS concentrations throughout a groundwater aquifer, to better understand variations in transport from contamination sources and resulting impacts on PFAS concentrations in drinking water extraction areas.

Arbuscular mycorrhizal fungi (AMF) are widespread and specialized soil symbiotic fungi, and the establishment of their symbiotic system is of great importance for adversity adaptation. To reveal the growth and photosynthetic characteristics of AMF–crop symbionts in response to heavy metal stress, this experiment investigated the effects of Rhizophagus irregularis (Ri) inoculation on the growth, photosynthetic gas exchange parameters, and chlorophyll fluorescence characteristics of hemp (Cannabis sativa L.) at a Cd concentration of 80 mg/kg. The results showed that (1) under Cd stress, the biomass of each plant structure in the Ri treatment was significantly higher than that in the noninoculation treatment (P < 0.05); (2) under Cd stress, the transpiration rate, stomatal conductance, net photosynthetic rate, PSII efficiency, apparent electron transport rate and photochemical quenching coefficient of the Ri inoculation group reached a maximum, with increases ranging from 1% to 28%; (3) inoculation of Ri significantly reduced Cd enrichment in leaves, which in turn significantly increased the transpiration rate, stomatal conductance, electron transfer rate, net photosynthetic rate and photosynthetic intensity, protecting PSII (P < 0.05); and (4) by measuring the light response curves of different treatments, the light saturation points of hemp inoculated with the Ri treatment reached 1448.4 μmol/m²/s, and the optical compensation point reached 24.0 μmol/m²/s under Cd stress. The Ri–hemp symbiont demonstrated high adaptability to weak light and high utilization efficiency of strong light under Cd stress. Our study showed that Ri–hemp symbiosis improves adaptation to Cd stress and promotes plant growth by regulating the photosynthetic gas exchange parameters and chlorophyll fluorescence parameters of plants. The Ri–hemp symbiosis is a promising technology for improving the productivity of Cd-contaminated soil.

Due to the high radiotoxicity in high concentrations, plutonium isotopes have drawn high attentions in the consideration of radiation risk, their sources, level, environmental behaviors, including deposition, retention and migration behaviors. However, such research in the Qinghai-Tibet Plateau is still missing, where is deemed as an environmental sensitive area. ²³⁹,²⁴⁰Pu in surface soil collected from the Qinghai-Tibet Plateau were determined for the first time in this work. The concentrations of ²³⁹,²⁴⁰Pu are in the range of 0.0176–1.95 Bq/kg, falling into the reported ranges in the background areas from the similar latitude belt. The ²⁴⁰Pu/²³⁹Pu atomic ratio range was measured to be 0.146–0.225, which is similar with the global fallout values. Both indicate that the global fallout is the major source of plutonium in this region, and the low plutonium level will not cause any radiation risk so far. Based on the statistical analysis of the possible parameters (organic content, moisture content, average annual precipitation, altitudes, topography and human activity), the large variations of ²³⁹,²⁴⁰Pu concentrations were mainly attributed to the retention process related factors including soil organic content and human activity disturbances. While, the deposition related factors including the average annual precipitation, altitudes, topography made insignificant influence on the spatial distribution of ²³⁹,²⁴⁰Pu concentrations due to the low ²³⁹,²⁴⁰Pu concentrations in atmosphere, less wet deposition amount and insignificant re-suspended amount. The highest ²³⁹,²⁴⁰Pu concentrations of 0.805–1.95 Bq/kg were mainly due to the good retention condition in the sampling sites with higher soil organic content and less human activity disturbances.

The carcinogenic attribute of arsenic (As) has turned the world to focus more on the decontamination and declining the present level of As from the environment especially from the soil and water bodies. Phytoremediation has achieved a status of sustainable and eco-friendly approach of decontaminating pollutants, and in the present study, an attempt has been made to reveal the potential of As remediation by a halophyte plant, Acanthus ilicifolius L. Special attention has given to analyse the morphological, physiological and anatomical modulations in A. ilicifolius, developed in response to altering concentrations of Na₂AsO₄.7H₂O (0, 70, 80 and 90 μM). Growth of A. ilicifolius under As treatments were diminished as assessed from the reduction in leaf area, root length, dry matter accumulation, and tissue water status. However, the plants exhibited a comparatively higher tolerance index (44%) even when grown in the higher concentrations of As (90 μM). Arsenic treatment induced reduction in the photochemical activities as revealed by the pigment content, chlorophyll stability index (CSI) and Chlorophyll a fluorescence parameter. Interestingly, the thickness and diameter of the xylem walls in the leaf as well as root tissues of As treated samples increased upon increasing the As concentration. The adaptive strategies exhibited by A. ilicifolius towards varying concentrations of As is the result of coordinated responses of morpho-physiological and anatomical attributes, which make the plant a promising candidate for As remediation, especially in wetlands.

Chlorinated paraffins (CPs) are used as additives in metal processing in the metal smelting industry. Data on CPs in the environment near metal smelting plants are limited. The objectives of this study were to investigate the concentrations and congener profiles of CPs in soil around factories in a non-ferrous metal recycling park located in Hebei, China, and to investigate human exposure to CPs in the soil. The concentrations of short-chain CPs (SCCPs) and medium-chain CPs (MCCPs) were determined by two-dimensional gas chromatography with electron capture negative ionization mass spectrometry. The SCCP and MCCP concentrations in the soil samples were 121–5159 ng/g and 47–6079 ng/g, respectively. Generally, the CP concentrations in soils around the factories were relatively high compared with those near other contaminated sites and in rural and urban areas. There were significant correlations between the MCCP concentrations, some SCCP carbon homologs, and the total organic carbon content (p < 0.05). The major SCCP and MCCP congener groups were C₁₀Cl₆–₇ and C₁₅–₁₆Cl₅, respectively. Hierarchical cluster analysis and principal component analysis indicated that SCCPs and MCCPs in the soil might originate from extreme pressure additives containing CP-42 and CP-52 and CP-containing waste material from the factories. The concentrations in two samples collected near a metal recycling factory posed a moderate risk according to a risk assessment conducted using risk quotients. Further risk assessment showed that the CPs concentrations in soil did not pose significant health risks to either children or adults.

As a promising amendment, biochar has excellent characteristics and can be used as a remediation agent for diverse types of soil pollution. Biochar is mostly made from agricultural wastes, forestry wastes, and biosolids (eg, sewage sludge), but not all the biochar has the same performance in the improvement of soil quality. There is a lack of guidelines devoted to the selection of biochar to be used for different types of soil pollution, and this can undermine the remediation efficiency. To shed light on this sensitive issue, this review focus on the following aspects, (i) how feedstocks affect biochar properties, (ii) the effects of biochar on heavy metals and organic pollutants in soil, and (iii) the impact on greenhouse gas emissions from soil. Generally, the biochars produced from crop residue and woody biomass which are composed of lignin, cellulose, and hemicellulose are more suitable for organic pollution remediation and greenhouse gas emission reduction, while biochar with high ash content are more suitable for cationic organic pollutant and heavy metal pollution (manure and sludge, etc.). Additionally, the effect of biochar on soil microorganisms shows that gram-negative bacteria in soil tend to use WB biochar with high lignin content, while biochar from OW (rich in P, K, Mg, and other nutrients) is more able to promote enzyme activity. Finally, our recommendations on feedstocks selection are presented in the form of a flow diagram, which is precisely intended to be used as a support for decisions on the crucial proportioning conditions to be selected for the preparation of biochar having specific properties and to maximize its efficiency in pollution control.