Soil pollution has become a real threat to mankind in the 21st century. On the one hand, soil pollution has reduced the world's arable land area, resulting in the contradiction between the world's population expansion and the shortage of arable land. On the other hand, soil pollution has seriously disrupted the soil ecological balance and significantly affected the biodiversity in the soil. Soil pollutants may further affect the survival, reproduction and health of humans and other organisms through the food chain. Several studies have suggested that biochar has the potential to act as a soil conditioner and to promote crop growth, and is widely used to remove environmental pollutants. Biochar modified by physical, chemical, and biological methods will affect the treatment efficiency of soil pollution, soil quality, soil ecology and interaction with organisms, especially with microorganisms. Therefore, in this review, we summarized several main biochar modification methods and the mechanisms of the modification and introduced the effects of the application of modified biochar to soil pollutant control, soil ecological regulation and soil nutrient regulation. We also introduced some case studies for the development of modified biochars suitable for different soil conditions, which plays a guiding role in the future development and application of modified biochar. In general, this review provides a reference for the green treatment of different soil pollutants by modified biochar and provides data support for the sustainable development of agriculture.

Effective immobilization of industrial waste into biochar development could be one of the most promising technologies for solid waste management to achieve circular economy. In this study, post-industrial cotton textile waste (PICTW), a cellulose rich industrial waste, was subjected to slow pyrolysis to develop a surface engineered biochar through phosphoric acid impregnation. Biochar produced at 500 °C designated as PICTWB500 showed a maximum methylene blue number (240 mg g⁻¹) with remarkable specific surface area of 1498 m² g⁻¹. FESEM, FTIR, XRD and Raman spectra analysis were performed to investigate the surface texture and functionalities developed in the biochar. Adsorption efficiency of the biochar was assessed using drimarene red, blue, violet, and black dyes as model dye pollutants in batch mode at different biochar dose, pH and contact time. The maximum monolayer adsorption capacity was obtained in the range 285–325 mg g⁻¹ for different dyes, determined from Langmuir adsorption model. The kinetic behaviour was more favourable with the pseudo second-order model. The recycling ability of PICTWB500 was proven to be effective up to 6th cycle without compromising its adsorption efficiency significantly. This study demonstrated an excellent adsorption capability of the biochar in dye laden real textile effluent and recycling of spent biochar as a precursor of bio compost. Hence, this study established a dual win strategy for waste utilization in textile industry using a closed loop approach with substantial techno-economic feasibility that may have potential applications.

Cadmium (Cd) is a non-essential trace element that accumulates in agricultural soils through the application of Cd-rich phosphate fertiliser. Vegetables can accumulate Cd to concentrations that sometimes exceed food safety standards. We investigated the potential of low-cost soil amendments to reduce Cd uptake by spinach (Spinacia oleracea L.), lettuce (Lactuca sativa L.) and onion (Allium cepa L.). Batch sorption experiments revealed the relative sorption of Cd by biosolids, charcoal, lignite, sawdust, two types of compost, bentonite and zeolite. Lignite and compost had the greatest ability to sorb Cd and were subsequently selected for pot trials, which elucidated their effect on Cd uptake by onions, spinach and lettuce in two market garden soils with native Cd concentrations of 1.45 mg/kg and 0.47 mg/kg. The addition of 2.5% (dry w/w) municipal compost reduced the Cd concentration in onions, spinach and lettuce by up to 60% in both soils. The addition of lignite gave variable results, which depended on the soil type and rate of addition. This Cd immobilisation was offset by soil acidification caused by the lignite. The results indicate that municipal compost is a low-cost soil conditioner that is effective in reducing plant Cd uptake.

The treatment of municipal wastewater produces clean water and sewage sludge (MSS), the management of which has become a serious problem in Europe. The typical destination of MSS is to spread it on land, but the presence of heavy metals and pollutants raises environmental and health concerns. Bioconversion mediated by larvae of black soldier fly (BSFL) Hermetia illucens (Diptera, Stratiomyidae: Hermetiinae) may be a strategy for managing MSS. The process adds value by generating larvae which contain proteins and lipids that are suitable for feed and/or for industrial or energy applications, and a residue as soil conditioner. MSS from the treatment plant of Ladispoli (Rome province) was mixed with an artificial fly diet at 50% and 75% (fresh weight basis) to feed BSFL. Larval performance, substrate reduction, and the concentrations of 12 metals in the initial and residual substrates and in larval bodies at the end of the experiments were assessed. Larval survival (> 96%) was not affected. Larval weight, larval development, larval protein and lipid content, and waste reduction increased in proportion the increase of the co-substrate (fly diet). The concentration of most of the 12 elements in the residue was reduced and, in the cases of Cu and Zn, the quantities dropped under the Italian national maximum permissible content for fertilizers. The content of metals in mature larvae did not exceed the maximum allowed concentration in raw material for feed for the European Directive. This study contributes to highlight the potential of BSF for MSS recovery and its valorization. The proportion of fly diet in the mixture influenced the process, and the one with the highest co-substrate percentage performed best. Future research using other wastes or by-products as co-substrate of MSS should be explored to determine their suitability.

Phosphorus is an essential mineral for the growth of plants which is supplied in the form of fertilizers. Phosphorus remains an inseparable part of developing agrarian economics. Phosphorus enters waterways through three different sources: domestic, agricultural, and industrial sources. Rainfall is the main cause for washing away a large amount of phosphates from farm soils into nearby waterways. The surplus of phosphorus in the water sources cause eutrophication and degradation of the habitat with an adverse effect on aquatic life and plants. Phosphate elimination is necessary to control eutrophication in water sources. Among the different methods reported for the removal and recovery of phosphorus: ion exchange, precipitation, crystallization, and others, adsorption standout as a sustainable solution. The current review offers a comparative assessment of the literature on novel materials and techniques for the removal of phosphorus. Herein, different adsorbents, their behaviors, mechanisms, and capacity of materials are discussed in detail. The adsorbents are categorized under different heads: iron-based, silica-alumina-based, calcium-based, biochar-based wherein the metal and metal oxides are employed in phosphorus removal. The ideal attribute of adsorbent will be the utilization of spent adsorbents as a phosphate plant food and a soil conditioner in agriculture. The review provides the perspective on the current research with potential challenges and directives for possible research in the field.

In two soils from Central Greece, a pot experiment was conducted with the addition of mixture at various ratios of zeolite and compost (based on Posidonia oceanica (L.) leaves) applied at a rate of 5% w/w (calculated on a soil dry weight basis). Three varieties of tobacco (Burley, Virginia, and Oriental) were cultivated, and Cu, Zn, and Cd concentrations in tobacco leaves were measured at first, second, and third primings. We found that the addition of zeolite in the soil1 led to a significant reduction of metal concentration in all three tobacco varieties compared to the control. Also, zeolite addition reduced significantly the water-soluble, as well as, DTPA-extractable metal concentrations, compared to the other treatments. Our results suggest that the most effective amendment in soil 1 was the mixture consisting of 20% compost and 80% zeolite; this mixture led to higher reduction of metal concentration in all tobacco varieties. As for soil 2, which had almost twice as high Cd concentrations as than in soil 1, Posidonia compost was more effective in reducing Cd concentrations from all three tobacco varieties. In all cases studied, both in soils 1 and 2, Cd concentration was higher in Burley tobacco leaves. The results indicate that a mixture of zeolite and compost consisting of Posidonia oceanica (L.) is a low-cost soil conditioner that is effective in reducing tobacco Cu, Zn, and Cd uptake.

Soil contamination with readily soluble salts and heavy metals is a major challenge concerning sustainable crop production. The use of organic wastes in agriculture not only helps in waste reduction but also acts as a soil conditioner and bio-stimulant for enhancing crop growth. In this regard, a pot experiment was conducted to investigate the effect of raw and processed animal manure (AM) on the growth, yield, and physicochemical parameters of Brassica napus L. developed under salinity and Ni stress. The experiment comprised two salinity levels (1.05 and 8 dS m⁻¹), two Ni levels (0 and 50 mg kg⁻¹), and two types of AMs (raw and processed at a rate of 2% w/w). A control treatment without AM incorporation was also included. In results, the application of AM markedly increased the growth and yield of B. napus under Ni and salinity stress; at the same time, it improved the physiological and chemical parameters of the said crop. Similarly, incorporation of processed AM significantly improved nutrient uptake and decreased Na/K ratios in the shoot and grain under the different stress conditions, as compared to the control. Likewise, Ni uptake in the grain, shoot, and root samples was also significantly reduced under the AM treatment. Also, the application of AM significantly reduced the daily intake of metal (DIM) index and the health risk index (HRI) values under the different stress conditions, as compared to the control. In conclusion, the application of processed AM constitutes an effective agricultural strategy to alleviate the adverse effects of Ni and salinity stress on growth, physiology, and yield of B. napus, thus resulting in enhanced productivity, as well as reduced risks associated with human health.

Phytomanagement uses plants and soil conditioners to create value on contaminated land while minimizing environmental risk. This work was carried out on a metal(loid)-contaminated site and aimed at assessing the suitability of Salvia sclarea L. (sage) and Coriandrum sativum L. (coriander) combined with an arbuscular mycorrhizal fungus (AMF) inoculant to immobilize metal(loid)s and produce essential oils (EO). The effect of the inoculant on the transfer of metal(loid)s (ML, i.e., Cd, Cu, Pb, Zn, As, Ni, and Sb) to plants and the ML soil mobility were investigated. The ML concentrations in EO from both plant species and the valorization options for the distillation residues (soil conditioner, animal fodder, and anaerobic digestion) were studied. Sage was a suitable candidate for this value chain because it presents an excluder phenotype and the residues of oil extraction could be used as a soil conditioner. The metal concentrations in the sage EO were similar to those obtained from plants cultivated on an uncontaminated soil. These results indicate the suitability of sage harvested on the contaminated soil according to the ML fate in the whole value chain. Like the EO of sage, ML concentrations in the coriander EO did not differ from those in the commercial EO that were obtained from plants grown on uncontaminated soil. However, the use of distillation residues of coriander was limited by their relatively elevated Cd concentrations. The use of a mycorrhizal inoculum did not decrease the Cd mobility in soil for the coriander.

The manufacture of asbestos materials has been banished worldwide due to their toxicity, but discarding the existing wastes remains a challenge. We investigated an alternative mechanochemical method to treat asbestos-cement materials by loading them with potassium and phosphorus from KH₂PO₄ during the milling process to obtain a product used as liming and soil conditioner. The results showed total asbestos fibrous elimination after 7 to 8 h of milling. The materials showed a slow-release fertilizer profile. The liming property is maintained when the asbestos-cement weight proportion used is equal to or higher than KH₂PO₄. A comparative soil experiment with limestone also indicates that lower doses of the K- and P-enriched detoxified asbestos cement were required to reach similar liming effects. Maize cultivation (greenhouse) was used to evaluate its performance showing higher biomass production for the sample loaded with potassium and phosphorous.