Microplastics are plastics that measure less than 5 mm in diameter. They enter the marine environment as primary sources directly from industrial uses, as well as secondary sources resulting from the degradation of large plastic debris. To improve the knowledge of microplastic pollution in China, we investigated samples from 53 estuarine sediment locations collected with a box corer within the Changjiang Estuary. Microplastics (<5 mm) were extracted from sediments by density separation, after which they were observed under a microscope and categorized according to shape, color and size. Identification was carried out using Micro-Fourier-Transform Infrared Spectroscopy (μ-FT-IR).The abundance of microplastics in the Changjiang Estuary was mapped. The mean concentration was 121 ± 9 items per kg of dry weight, varying from 20 to 340 items per kg of dry weight. It was found that the concentration of microplastics was the highest on the southeast coast of Shanghai. The distribution pattern of microplastics may be affected by the Changjiang diluted water in summer. All of the microplastics collected were categorized according to shape, color and size. Among which fiber (93%), transparent (42%) and small microplastics (<1 mm) (58%) were the most abundant types. No clear correlation between microplastics and the finer sediment fraction was found. Rayon, polyester, and acrylic were the most abundant types of microplastics identified, indicating that the main source of microplastics in the Changjiang Estuary was from washing clothes (the primary source). It is possible to compare microplastic abundance in this study with the results of other related studies using the same quantification method. The identification of microplastics raises the awareness of microplastic pollution from drainage systems. The prevalence of microplastic pollution calls for monitoring microplastics at a national scale on a regular basis.

Microplastic fibers (MP) from textile weathering and washing are increasingly being recognized as environmental pollutants. The majority of studies on the bioavailability and effects of microplastic focused on small polystyrene spherical plastic particles, while less data are available for fibers and for other materials besides polystyrene. We investigated the ingestion and effects of ground polyethylene terephthalate (PET) textile microfibers (length range: 62–1400 μm, width 31–528 μm, thickness 1–21.5 μm) on the freshwater zooplankton crustacean Daphnia magna after a 48 h exposure and subsequent 24 h of recovery in MP free medium and algae. The majority of ingested fibers by D. magna were around 300 μm, but also some very large twisted MP fibers around 1400 μm were found inside the gut. Exposure to these fibers results in increased mortality of daphnids after 48 h only in the case where daphnids were not pre-fed with algae prior to experiment, but no effect was found when daphnids were fed before the experiments. Regardless of the feeding regime, daphnids were not able to recover from MP exposure after additional 24 h incubation period in a MP free medium with algae. The uptake and effects of PET textile MP on D. magna are presented here for the first time.

Atmospheric nitrogen deposition is one of the main threats for biodiversity and ecosystem functioning. Measurement techniques like ion-exchange resin collectors (IECs), which are less expensive and time-consuming than conventional methods, are gaining relevance in the study of atmospheric deposition and are recommended to expand monitoring networks. In the present work, bulk and throughfall deposition of inorganic nitrogen were monitored in three different holm oak forests in Spain during two years. The results obtained with IECs were contrasted with a conventional technique using bottle collectors and with a literature review of similar studies. The performance of IECs in comparison with the conventional method was good for measuring bulk deposition of nitrate and acceptable for ammonium and total dissolved inorganic nitrogen. Mean annual bulk deposition of inorganic nitrogen ranged 3.09–5.43 kg N ha−1 according to IEC methodology, and 2.42–6.83 kg N ha−1 y−1 using the conventional method. Intra-annual variability of the net throughfall deposition of nitrogen measured with the conventional method revealed the existence of input pulses of nitrogen into the forest soil after dry periods, presumably originated from the washing of dry deposition accumulated in the canopy. Important methodological recommendations on the IEC method and discussed, compiled and summarized.

Coal burning in power plants and industrial boilers is the largest combustion source of mercury emissions in China. Together, power plants and industrial boilers emit around 250 tonnes of mercury each year, or around half of atmospheric mercury emissions from anthropogenic sources in the country. Power plants in China are generally equipped with multi-pollutant control technologies, which offer the co-benefit of mercury removal, while mercury-specific control technologies have been installed in some facilities. In contrast, most industrial boilers have only basic or no flue gas cleaning. A combination of measures, including energy conservation, coal switching and blending, reducing the mercury contents of coals through washing, combustion controls, and flue gas cleaning, can be used to reduce mercury emissions from these stationary combustion sources. More stringent emission standards for the major air pollutants from coal-fired power plants and industrial boiler, along with standards for the previously unregulated mercury, were implemented recently, which is expected to bring significant reduction in their mercury emissions through the necessary upgrades of multi-pollutant and mercury-specific control technologies. Meanwhile, strong monitoring capacity and strict enforcement are necessary to ensure that the combustion sources operate in compliance with the new emission standards and achieve significant reduction in the emissions of mercury and other air pollutants.

The remediation of a genuinely PAH-contaminated soil was performed, for the first time, through a new and complete investigation, including PAH extraction followed by advanced oxidation treatment of the washing solution and its recirculation, and an analysis of the impact of the PAH extraction on soil respirometry. The study has been performed on the remediation of genuine PAH-contaminated soil, in the following three steps: (i) PAH extraction with soil washing (SW) techniques, (ii) PAH degradation with an electro-Fenton (EF) process, and (iii) recirculation of the partially oxidized effluent for another SW cycle. The following criteria were monitored during the successive washing cycles: PAH extraction efficiency, PAH oxidation rates and yields, extracting agent recovery, soil microbial activity, and pH of soil. Two representative extracting agents were compared: hydroxypropyl-beta-cyclodextrin (HPCD) and a non-ionic surfactant, Tween® 80. Six PAH with different numbers of rings were monitored: acenaphthene (ACE), phenanthrene (PHE), fluoranthene (FLA), pyrene (PYR), benzo(a)pyrene (BaP), and benzo(g,h,i)perylene (BghiP). Tween® 80 showed much better PAH extraction efficiency (after several SW cycles) than HPCD, regardless of the number of washing cycles. Based on successive SW experiments, a new mathematical relation taking into account the soil/water partition coefficient (Kd*) was established, and could predict the amount of each PAH extracted by the surfactant with a good correlation with experimental results (R² > 0.975). More HPCD was recovered (89%) than Tween® 80 (79%), while the monitored pollutants were completely degraded (>99%) after 4 h and 8 h, respectively. Even after being washed with partially oxidized solutions, the Tween® 80 solutions extracted significantly more PAH than HPCD and promoted better soil microbial activity, with higher oxygen consumption rates. Moreover, neither the oxidation by-products nor the acidic media (pH approximately 3) of the partially oxidized solution inhibited the general soil microbial activity during the washing cycle.

Ethylenediurea (EDU) is a common research tool for investigating ozone impacts on vegetation, although the role of different application routes (foliar spray vs soil drench) on EDU persistence in the leaves is unknown. We quantified EDU concentrations in leaves of the O3-sensitive Bel-W3 cultivar of tobacco treated with EDU as either foliar spray or soil drench. Foliar EDU concentrations were measured by Q-TOF LC/MS. When EDU was applied as foliar spray, 1 h was enough for reaching a measurable concentration within the leaf. EDU concentration increased over the 21-day period when the leaf was not washed after the application (treatment #1), while it decreased when the leaf was washed after the application (treatment #2). These results suggest that: a) dry deposition of EDU onto the leaf surface was gradually absorbed into the unwashed leaf, although the mechanisms of such uptake were unclear; b) concentration of EDU was decreased quickly (−35%) during the first 24 h from application and more slowly during the following three days (−20%) in the washed leaves. Degradation did not involve enzymatic reactions and was not affected by the presence of ROS. When EDU was applied as soil drench, foliar concentrations increased over time, likely due to adsorption onto soil organic matter and gradual re-solubilization by irrigation water. An analysis of EDU concentration in protoplast and intercellular washing fluid showed that EDU did not enter the cells, but was retained in the apoplast only. Possible implications of EDU in the apoplast and recommendations for EDU application are discussed.

One of the main challenges of bioremediation is to define efficient protocols having a low environmental impact. We have investigated the effect of three treatments in oily-seawater after a real oil-spill occurred in the Gulf of Taranto (Italy). Biostimulation with inorganic nutrients allowed the biodegradation of the 73±2.4% of hydrocarbons, bioaugmentation with a selected hydrocarbonoclastic consortium consisting of Alcanivorax borkumensis, Alcanivorax dieselolei, Marinobacter hydrocarbonoclasticus, Cycloclasticus sp. 78-ME and Thalassolituus oleivorans degraded 79±3.2%, while the addition of nutrients and a washing agent has allowed the degradation of the 69±2.6%. On the other hand, microbial community was severely affected by the addition of the washing agent and the same product seemed to inhibit the growth of the majority of strains composing the selected consortium at the tested concentration. The use of dispersant should be accurately evaluated also considering its effect on the principal actors of biodegradation.

Polycyclic aromatic hydrocarbons (PAHs) and linear alkylbenzenes (LABs) were used as anthropogenic markers of organic chemical pollution of sediments in the Selangor River, Peninsular Malaysia. This study was conducted on sediment samples from the beginning of the estuary to the upstream river during dry and rainy seasons. The concentrations of ƩPAHs and ƩLABs ranged from 203 to 964 and from 23 to 113ngg−1 dry weight (dw), respectively. In particular, the Selangor River was found to have higher sedimentary levels of PAHs and LABs during the wet season than in the dry season, which was primarily associated with the intensity of domestic wastewater discharge and high amounts of urban runoff washing the pollutants from the surrounding area. The concentrations of the toxic contaminants were determined according to the Sediment Quality Guidelines (SQGs). The PAH levels in the Selangor River did not exceed the SQGs, for example, the effects range low (ERL) value, indicating that they cannot exert adverse biological effects.

Washing clothes made from synthetic materials has been identified as a potentially important source of microscopic fibres to the environment. This study examined the release of fibres from polyester, polyester-cotton blend and acrylic fabrics. These fabrics were laundered under various conditions of temperature, detergent and conditioner. Fibres from waste effluent were examined and the mass, abundance and fibre size compared between treatments. Average fibre size ranged between 11.9 and 17.7μm in diameter, and 5.0 and 7.8mm in length. Polyester-cotton fabric consistently shed significantly fewer fibres than either polyester or acrylic. However, fibre release varied according to wash treatment with various complex interactions. We estimate over 700,000 fibres could be released from an average 6kg wash load of acrylic fabric. As fibres have been reported in effluent from sewage treatment plants, our data indicates fibres released by washing of clothing could be an important source of microplastics to aquatic habitats.

This research work evaluates the use of hydrogen peroxide for the removal of cyanide from coking wastewater deriving from the washing of gases in coal combustion furnace. The effect of the presence or absence of suspended solids and organic micropollutants on the efficiency of the treatment is analyzed. Various dosages of hydrogen peroxide (6.5–200 mg/L) were added to both aqueous solution (at pH 10.5) and industrial wastewater (at pH 10.3) samples. The influence of suspended solids in coking wastewater was analyzed by applying a coagulation–flocculation–decantation process before the hydrogen peroxide treatment. The preliminary cyanide removal treatment in aqueous solution showed that the maximum cyanide removal did not exceed 14 % using a mass ratio of hydrogen peroxide to cyanide of 11.6. The maximum cyanide removal obtained in coking wastewater was 47 % with a mass ratio of hydrogen peroxide to cyanide of 12.2 provided that a coagulation–flocculation–decantation pretreatment was applied to remove the suspended solids composed mainly of coal, calcium carbonate, and magnesium carbonate. On the other hand, the cyanide removal treatment in coking wastewater with hydrogen peroxide showed promising results in the removing of different organic micropollutants formed mainly by polycyclic aromatic hydrocarbons and quinolines.