Affiner votre recherche
Résultats 61-70 de 2,823
Bioremediation of ossein effluents using the filamentous marine cyanobacterium Cylindrospermum stagnale
2021
Ameen, Fuad | Al-Homaidan, Ali A. | Alsamhary, Khawla | Al-Enazi, Nouf M. | AlNadhari, Saleh
Wastewater containg proteinaceous ossein effluents are problematic to be treated. We studied the possibility to treat ossein effluents with the marine cyanobacterium strain Cylindrospermum stagnale. After optimizing the culture conditions of the bacterium, three different types of ossein effluents were tested: dicalcium phosphate (DCP), high total dissolved solids (HTDS) and low total dissolved (LTDS). The effluents were diluted with sea water at the following ratios 1:1, 2:1 and 3:2. The optimum operating conditions were at 3000 lux light intensity and 37 °C temperature. The highest degradation of ossein effluens by C. stagnale was attained for a dilution ratio of 1:1. However, less diluted ossein effluents reduced the growth of C. stagnale drastically. The degradation was shown by measuring the chlorophyll a content and the dry weight of bacterial cells during a seven-day incubation period degradation. Fourier Transform Infrared Spectroscopy (FT-IR) analysis verified the degradation showing the presence of the degradation products of ossein (i.e. calcium carbonate and calcite) in the culture medium. Lipid composition in fatty acids appeared to be suitable for biofuel production. The results showed that the marine cyanobacterium C. stagnale can be used to treat ossein effluents, and at the same time, to produce biofuel in a sustainable way.
Afficher plus [+] Moins [-]Source- and polymer-specific size distributions of fine microplastics in surface water in an urban river
2021
Kameda, Yutaka | Yamada, Naofumi | Fujita, Emiko
There is increasing concern about the environmental behaviors of microplastics (MPs), in particular fine MPs (FMPs), such as their concentrations, sources, size distributions, and fragmentation by weathering in waters. However, there is little information about size distributions of MP polymer types and their relationships to their sources. Here, we analyzed concentrations, compositions, and size distributions of 18 polymer types of MPs of >20 μm by micro-Fourier transform infrared spectroscopy with a novel pretreatment method in surface waters at five sites from the headwaters to the mouth of a Japanese river, and in influent and effluent from a sewage treatment plant (STP). The microplastic concentrations ranged from 300 to 1240 particles/m³ in surface waters. Cluster analysis identified two primary sources of MPs: residential wastewater at the headwater site and non-point sources from urban areas at downstream sites; concentrations of chemical contaminants from STPs were much higher at the downstream sites. The median particle sizes (D₅₀) of MPs increased in urban areas at the downstream sites and were larger than those in influent and effluent. These results imply the release of larger MPs from non-point sources in urban areas. The size distributions of each polymer and all MPs could be fitted significantly to the Weibull distribution function. Values of D₅₀, shape parameters, and scale parameters estimated from the functions were useful indicators for evaluating size distributions in detail. A significant positive correlation of D₅₀ with the tensile strengths of virgin polymers among 13 dominant polymers detected in the surface water suggests that the fragmentation properties of each polymer are influenced by its physical strength. Multidimensional analysis with concentrations, polymeric compositions, and size distributions of MPs, including FMPs, could provide useful information about their sources and their environmental behaviors.
Afficher plus [+] Moins [-]An assessment of contamination fingerprinting techniques for determining the impact of domestic wastewater treatment systems on private well supplies
2021
Fennell, Christopher | Misstear, Bruce | O’Connell, David | Dubber, Donata | Behan, Patrice | Danaher, Martin | Moloney, Mary | Gill, Laurence
Private wells in Ireland and elsewhere have been shown to be prone to microbial contamination with the main suspected sources being practices associated with agriculture and domestic wastewater treatment systems (DWWTS). While the microbial quality of private well water is commonly assessed using faecal indicator bacteria, such as Escherichia coli, such organisms are not usually source-specific, and hence cannot definitively conclude the exact origin of the contamination. This research assessed a range of different chemical contamination fingerprinting techniques (ionic ratios, artificial sweeteners, caffeine, fluorescent whitening compounds, faecal sterol profiles and pharmaceuticals) as to their use to apportion contamination of private wells between human wastewater and animal husbandry wastes in rural areas of Ireland. A one-off sampling and analysis campaign of 212 private wells found that 15% were contaminated with E. coli. More extensive monitoring of 24 selected wells found 58% to be contaminated with E. coli on at least one occasion over a 14-month period. The application of fingerprinting techniques to these monitored wells found that the use of chloride/bromide and potassium/sodium ratios is a useful low-cost fingerprinting technique capable of identifying impacts from human wastewater and organic agricultural contamination, respectively. The artificial sweetener acesulfame was detected on several occasions in a number of monitored wells, indicating its conservative nature and potential use as a fingerprinting technique for human wastewater. However, neither fluorescent whitening compounds nor caffeine were detected in any wells, and faecal sterol profiles proved inconclusive, suggesting limited suitability for the conditions investigated.
Afficher plus [+] Moins [-]Cross-linked sulfydryl-functionalized graphene oxide as ultra-high capacity adsorbent for high selectivity and ppb level removal of mercury from water under wide pH range
2021
Bao, Shuangyou | Wang, Yingjun | Yu, Yongsheng | Yang, Weiwei | Sun, Yinyong
It is highly desirable but remains extremely challenging to develop a facile strategy to prepare adsorbent for dealing with heavy metal pollution in water. Here, we report a facile approach for preparing sulfydryl-functionalized graphene oxide (S-GO) by cross-linking method with an unprecedented adsorption capacity and ultrahigh selectivity for efficient Hg(II) removal. The adsorbents exhibit a prominent performance in capturing Hg(II) from wastewater with a record-high adsorption capacity of 3490 mg/g and rapid kinetics to reduce Hg(II) contaminants below the discharge standard of drinking water (2 ppb) within 60 min under a wide pH range even in the coexistent of other interfering metal ions. In addition, the adsorbents can be also easily recycled and reused multiple times with no apparent decline in removal efficiency. Considering the broad diversity, we developed also a magnetic Fe₃O₄/S-GO adsorbent by a simple chemical cross-linking reaction to achieve rapid separation of S-GO from their aqueous solution. In addition, the adsorbents were successfully applied in dealing with the practical industrial wastewater. The results indicate the potential of rationally designed sulfydryl-functionalized graphene oxide for high performance Hg(II) removal.
Afficher plus [+] Moins [-]Antibiotics in wastewater: From its occurrence to the biological removal by environmentally conscious technologies
2021
Langbehn, Rayane Kunert | Michels, Camila | Soares, Hugo Moreira
In this critical review, we explored the most recent advances about the fate of antibiotics on biological wastewater treatment plants (WWTP). Although the occurrence of these pollutants in wastewater and natural streams has been investigated previously, some recent publications still expose the need to improve the detection strategies and the lack of information about their transformation products. The role of the antibiotic properties and the process operating conditions were also analyzed. The pieces of evidence in the literature associate several molecular properties to the antibiotic removal pathway, like hydrophobicity, chemical structure, and electrostatic interactions. Nonetheless, the influence of operating conditions is still unclear, and solid retention time stands out as a key factor. Additionally, the efficiencies and pathways of antibiotic removals on conventional (activated sludge, membrane bioreactor, anaerobic digestion, and nitrogen removal) and emerging bioprocesses (bioelectrochemical systems, fungi, and enzymes) were assessed, and our concern about potential research gaps was raised. The combination of different bioprocess can efficiently mitigate the impacts generated by these pollutants. Thus, to plan and design a process to remove and mineralize antibiotics from wastewater, all aspects must be addressed, the pollutant and process characteristics and how it is the best way to operate it to reduce the impact of antibiotics in the environment.
Afficher plus [+] Moins [-]Evaluation of graphenic and graphitic materials on the adsorption of Triton X-100 from aqueous solution
2021
Presently, graphenic nanomaterials are being studied as candidates for wastewater pollutant removal. In this study, two graphite oxides produced from natural graphite with different grain sizes (325 and 10 mesh), their respective reduced graphene oxides and one reduced graphene oxide with nitrogen functional groups were synthesized and tested to remove a surfactant model substrate, Triton X-100, from an aqueous solution. Kinetic experiments were carried out and adjusted to pseudo-first order equation, pseudo-second order equation, Elovich, Chain-Clayton and intra-particle diffusion models. Reduced graphene oxides displayed an instantaneous adsorption due to their accessible and hydrophobic surfaces, while graphite oxides hindered the TX100 adsorption rate due to their highly superficial oxygen content. Results from the adsorption isotherms showed that the Sips model perfectly described the TX100 adsorption behavior of these materials. Higher adsorption capacities were developed with reduced graphene oxides, being maximum for the material produced from the lower graphite grain size (qₑ = 3.55·10⁻⁶ mol/m²), which could be explained by a higher surface area (600 m²/g), a lower amount of superficial oxygen (O/C = 0.04) and a more defected structure (ID/IG = 0.85). Additionally, three commercial high surface area graphites in the range of 100–500 m²/g were evaluated for comparison purposes. In this case, better adsorption results were obtained with a more graphitic material, HSAG100 (qₑ = 1.72·10⁻⁶ mol/m²). However, the best experimental results of this study were obtained using synthesized graphenic materials.
Afficher plus [+] Moins [-]Biological selenite removal and recovery of selenium nanoparticles by haloalkaliphilic bacteria isolated from the Nakdong River
2021
Won, Sangmin | Ha, Myung-Gyu | Nguyen, Dinh Duc | Kang, Ho Young
Microbial selenite reduction has increasingly attracted attention from the scientific community because it allows the separation of toxic Se from waste sources with the concurrent recovery of Se nanoparticles, a multifunctional material in nanotechnology industries. In this study, four selenite-reducing bacteria, isolated from a river water sample, were found to reduce selenite by > 85% within 3 d of incubation, at ambient temperature. Among them, strain NDSe-7, belonging to genus Lysinibacillus, can reduce selenite and produce Se nanospheres in alkaline conditions, up to pH 10.0, and in salinity of up to 7.0%. This strain can reduce 80 mg/L of selenite to elemental Se within 24 h at pH 6.0–8.0, at a temperature of 30–40 °C, and salinity of 0.1–3.5%. Strain NDSe-7 exhibited potential for use in Se removal and recovery from industrial saline wastewater with high alkalinity. This study indicates that extremophilic microorganisms for environmental remediation can be found in a conventional environment.
Afficher plus [+] Moins [-]Source contribution analysis of nutrient pollution in a P-rich watershed: Implications for integrated water quality management
2021
Han, Jianxu | Xin, Zhuohang | Han, Feng | Xu, Bo | Wang, Longfan | Zhang, Chi | Zheng, Yi
It is still a great challenge to address nutrient pollution issues caused by various point sources and non-point sources on the watershed scale. Source contribution analysis based on watershed modeling can help watershed managers identify major pollution sources, propose effective management plans and make smart decisions. This study demonstrated a technical procedure for addressing watershed-scale water pollution problems in an agriculture-dominated watershed, using the Dengsha River Watershed (DRW) in Dalian, China as an example. The SWAT model was improved by considering the constraints of soil nutrient concentration, i.e., nitrogen (N) and phosphorus (P), when modeling the nutrient uptake by a typical crop, corn. Then the modified SWAT model was used to quantify the contributions of all known pollution sources to the N and P pollution in the DRW. The results showed that crop production and trans-administrative wastewater discharge were the two dominant sources of nutrient pollution. This study further examined the responses of nutrient loss and crop yield to different fertilizer application schemes. The results showed that N fertilizer was the limiting factor for crop yield and that excessive levels of P were stored in the agricultural soils of the DRW. An N fertilizer application rate of approximately 40% of the current rate was suggested to balance water quality and environmental protection with crop production. The long-term impact of legacy P was investigated with a 100-year future simulation that showed the crop growth could maintain for 12 years even after P fertilization ceased. Our study highlights the need to consider source attribution, fertilizer application and legacy P impacts in agriculture-dominated watersheds. The analysis framework used in this study can provide a scientifically sound procedure for formulating adaptive and sustainable nutrient management strategies in other study areas.
Afficher plus [+] Moins [-]Natural and anthropogenic impacts on the DOC characteristics in the Yellow River continuum
2021
Wen, Zhidan | Song, Kaishan | Shang, Yingxin | Lyu, Lili | Tao, Hui | Liu, Ge
The Yellow River is the second largest river in China. Carbon transport by the Yellow River has significant influence on riverine carbon cycles in Asia. During the wet season, the riverine carbon was mainly found in dissolved form, i.e., dissolved organic carbon (DOC), along the entire course of the river. The distinct spatial variations of DOC concentration were observed at different reaches of the mainstream (p < 0.01), while the highest mean DOC concentration was generally observed at midstream (4.13 ± 0.91 mg/L). Carbon stable isotope analysis δ¹³C and C: N ratio of DOC, evidenced the sources of DOC in headwater and upstream were primarily the terrestrial plants (94% and 61%), but it was changed to soil organic matter (SOM) in mid- and downstream (36% and 37%), and the contribution of sewage to DOC were also increased to 17% and 18%. In the whole mainstream of the Yellow River, water temperature (WT) had a significant impact on DOC concentration, and it could explain 67% of the DOC variance. However, in a large catchment, the driving mechanisms on the DOC variations in headwaters will not necessarily be those controlling DOC trends in downstream. The study firstly quantified, in headwater and upstream, the natural factors explained as much as 65% and 73% of the DOC variations, respectively. In mid- and downstream areas, DOC was significantly influenced by the amount of wastewater discharged by the industry and the use of chemical fertilizers (p < 0.05). These findings may facilitate a better assessment of global riverine carbon cycling and may help to reveal the importance of the balance between development and environmental sustainability with the changing DOC transport features in the Yellow River due to human disturbances.
Afficher plus [+] Moins [-]Sustainable ferrate oxidation: Reaction chemistry, mechanisms and removal of pollutants in wastewater
2021
Dar, Afzal Ahmed | Pan, Bao | Qin, Jiani | Zhu, Qiuhui | Lichtfouse, Eric | ʻUs̲mān, Muḥammad | Wang, Chuanyi
This review is intended to evaluate the use of ferrate (Fe(VI)), being a green coagulant, sustainable and reactive oxidant, to remove micro pollutants especially pharmaceutical pollutants in contaminated water. After a brief description of advanced oxidation processes, fundamental dimensions regarding the nature, reactivity, and chemistry of this oxidant are summarized. The degradation of contaminants by Fe(VI) involves several mechanisms and reactive agents which are critically evaluated. The efficiency and chemistry of Fe(VI) oxidation differs according to the reaction conditions and activation agent, such as soluble Fe(VI) processes, which involve Fe(VI), UV light, and electro-Fe(VI) oxidation. Fe(VI) application methods (including single dose, multiple doses, chitosan coating etc), and Fe(VI) with activating agents (including sulfite, thiosulfate, and UV) are also described to degrade the micro pollutants. Besides, application of Fe(VI) to remove pharmaceuticals in wastewater are intensely studied. Electrochemical prepared Fe(VI) has more wide application than wet oxidation method. Meanwhile, we elaborated Fe(VI) performance, limitations, and proposed innovative aspects to improve its stability, such as the generation of Fe(III), synergetic effects, nanopores entrapment, and nanopores capsules. This study provides conclusive direction for synergetic oxidative technique to degrade the micro pollutants.
Afficher plus [+] Moins [-]