Occurrence and fate of alkylphenols (APs), known endocrine disruptors, were investigated in a Great Lakes coastal wetland, Cootes Paradise, ON. The wetland, which receives discharges from a Wastewater Treatment Plant (WTP) and several Combined Sewer Overflows (CSOs), is an important spawning ground for fish and crucial habitat for other fauna. Elevated concentrations of nonylphenol ethoxylates (NPEs) and their degradation product nonylphenol (NP) were found in water and sediment samples near the sources. Since transfer of APs through the food chain is of concern, we compared their concentrations in invertebrates from clean and contaminated sites. The results reveal transfer of alkylphenolics from sediments to biota and their accumulation in the invertebrate tissue, particularly the highly hydrophobic 4-NP, whose concentrations ranged from 1.9 to 6.3 μg g-1. To our knowledge, this is the first study to evaluate AP concentrations in tissue of benthic invertebrates under real environmental conditions. Concentrations of alkylphenolic compounds in water, sediments and benthic invertebrates in a large coastal wetland and implications for trophic transfer.

Intermittent wastewater loading, a characteristic of aquaculture operations, undermines the usefulness of treatment wetlands designed using the steady state assumption. Being biological systems, the treatment variability of such wetlands must also be addressed during the design phase. A simulation-optimization model suitable for modeling intermittent pollutant releases and identifying optimal area and wastewater loading patterns for aquaculture operations is integrated with a decision-analytic framework to determine wetland area and release pattern under uncertainty and risk. Wetland area and release patterns corresponding to different decision making priorities were obtained by applying the minimax, maximax, Hurwicz and minimax regret criteria. The developed methodology provides a convenient framework for aquaculture operators and wetland design engineers to consider trade-off between the wetland size (an indicator of construction and opportunity costs) and wastewater loadings (an indicator of operation costs) during the design process. The results can also be used to characterize the risk-attitudes of the aquaculture operators and identify the worth of additional studies (i.e., pilot tests) given their risk-preferences.

The aim of presented study was to determine the influence of long-term inundation on the changes in the content of polycyclic aromatic hydrocarbons. Two soils (B, MS) with differentiated properties were selected for the presented study. The experiment was carried out in 5-l containers, irrigated with distilled or post-sewage water for seven days. The study samples were collected directly after the water had been drained and then after seven, 14, 28 and 50 days. In the material collected, the content of polycyclic aromatic hydrocarbons was determined by means of the HPLC-UV method. The soils used for the presented experiment were characterised by differentiated PAH content levels. However, in both soils 28 days after water had been drained, a gradual increase of the PAH sum was noted. This increase was in relation to beginning of the experiment significantly higher in soil MS characterised by a lower PAH content (43% and 86%, respectively in the experiment with distilled and post-sewage water). The range of the PAH sum increase in soil B was from 28% to 38%. After the 28th day of the experiment, a decreasing trend was noted. The trend persisted until the last experimental date. Only in soil B, a decrease in the PAH up to a level close to the PAH level on the onset of the experiment was observed. In soil MS, PAH content on the last experimental date was still 25% (distilled water) and 52% (post-sewage water) higher than at the beginning of the experiment. In control soils (non-flooded), PAH content did not undergo any significant changes during the whole experimental period. In the presented studies, significant relationships between the values of some PAH content levels and Ca²⁺ ions content was noted.

The prevalence and diversity of antibiotic resistant enterococci populations in samples collected four times from urban sewage treatment plant in Tehran, Iran between June 2005 and July 2006 were studied. Filtered samples were grown on mEnterococci medium containing 4 μg/ml vancomycin after which the enterococci isolates were identified to the species level. All strains were then tested for their resistance against nine antibiotics. Of the 131 isolates, 98 (75%) isolates were identified as Enterococcus gallinarum, followed by 24 (18%) and 9 (7%) for E. faecium and E. casseliflavus, respectively. All E. gallinarum isolates carried vanC1 gene with 64 (65%) and 14 (14%) isolates concomitantly harboured either vanA or vanB gene, respectively. Some E. casseliflavus concomitantly harboured vanA and vanC2 or vanB and vanC2. Typing the total enterococci isolates with a high resolution biochemical fingerprinting method showed a high diversity (D i = 0.91). We have shown by biochemical fingerprinting the presence of highly diverse glycopeptide resistant E. gallinarum and E. casseliflavus that have captured vanA and vanB genetic determinants under natural conditions. To our knowledge this is the first report in this geographical region showing high frequency antibiotic resistant enterococcal populations in particular E. gallinarum carrying assorted vancomycin resistance genes.

GOAL, SCOPE AND BACKGROUND: Fragrance preparations or perfumes are used in an increasing variety of applications, as for example washing, cleansing, personal care products, consumer goods or in applications to modify indoor air. However, up to now, little is known to the general or scientific public about their chemical identity and the use pattern of single substances, not even for high production volume chemicals. Some toxicological data are published for a comparatively small number of substances with a focus on sensitisation and dermal effects, while other effects are neglected. Information on ecotoxicity and environmental fate are rare, especially for long-term exposure. Data for a detailed hazard and risk analysis are available in exceptional cases only. According to the current legal situation, fragrance industry is self-regulated, which means that pre-market risk evaluation is not required for most fragrances. Odour and the ability to smell play a major role for wildlife for all taxonomic groups. Reproductive and social behaviour, defence, communication and orientation depend on volatile compounds which can be identical to those used in fragrance preparations. Our interdisciplinary approach leads to the question of whether and, if so, to what extent anthropogenic fragrances may influence life and reproduction of organisms in the environment. MAIN FEATURES: Information from literature on use, exposure and biological effects was combined to analyse the state of knowledge. Following an overview of the amounts of fragrances used in different consumer products and their release into the environment, the roles of odours in nature are shown for a selection of compounds. Existing regulation was analysed to describe the data basis for environmental risk evaluation. Finally, recommendations for further action are derived from these findings. RESULTS: Three main results were elaborated: First, fragrance substances are continuously discharged in large amounts into the environment, especially via the waste water. Second, there are some indications of negative effects on human health or the environment, although the data basis is very thin due to the self regulation of the fragrance industry and the regulatory situation of fragrance substances. Third, many odoriferous substances used by man are identical to those which are signal substances of environmental organisms at very low concentrations, thus giving rise to specific mode of actions in the ecosystem. RECOMMENDATION: For the adequate risk assessments of fragrances, test results on their unspecific as well as their specific effects as signal substances are needed. This would imply prioritisation methods and development of useful test methods for specific endpoints for appropriate risk assessments. Before a comprehensive testing and evaluation of results has been finished, a minimization of exposure should be envisaged. Eco-labelling of products containing acceptable fragrance ingredients could be a first step and provide consumers with the respective information. Transparency concerning the fragrance ingredients used and their biological potency will help to build up confidence between producers and consumers. CONCLUSIONS AND PERSPECTIVES: The interdisciplinary approach, bringing together chemical, biological, toxicological and ecotoxicological data with information provided by manufacturers and with legal and consumer aspects, offers new insights into the field of fragrance substances used in consumer products. The amounts and application fields of fragrance substances increases while fate and effects in the environment are hardly known. The current legal situation is not suited to elucidate the effects of fragrances on human health and the environment sufficiently, especially as it was shown that fragrances may play a considerable role in the ecosystem on the behaviour of organisms. According to the precautionary principle, the lack of knowledge should best be tackled by reducing exposure, especially for compounds such as fragrance substances where no ethical reasons object a substitution by less hazardous chemicals.

GOAL, SCOPE AND BACKGROUND: Aquaculture activities are well known to be the major contributor to the increasing level of organic waste and toxic compounds in the aquaculture industry. Along with the development of intensive aquaculture in China, concerns are evoked about the possible effects of everincreasing aquaculture waste both on productivity inside the aquaculture system and on the ambient aquatic ecosystem. Therefore, it is apparent that appropriate waste treatment processes are needed for sustaining aquaculture development. This review aims at identifying the current status of aquaculture and aquaculture waste production in China. MAIN FEATURES: China is the world’s largest fishery nation in terms of total seafood production volume, a position it has maintained continuously since 1990. Freshwater aquaculture is a major part of the Chinese fishery industry. Marine aquaculture in China consists of both land-based and offshore aquaculture, with the latter mostly operated in shallow seas, mud flats and protected bays. The environmental impacts of aquaculture are also striking. RESULTS: Case studies on pollution hot spots caused by aquaculture have been introduced. The quality and quantity of waste from aquaculture depends mainly on culture system characteristics and the choice of species, but also on feed quality and management. Wastewater without treatment, if continuously discharged into the aquatic environment, could result in remarkable elevation of the total organic matter contents and cause considerable economy lost. Waste treatments can be mainly classified into three categories: physical, chemical and biological methods. DISCUSSION: The environmental impacts of different aquaculture species are not the same. New waste treatments are introduced as references for the potential development of the waste treatment system in China. The most appropriate waste treatment system for each site should be selected according to the sites’ conditions and financial status as well as by weighing the advantages and disadvantages of each system. Strategies and perspectives for sustainable aquaculture development are proposed, with the emphasis on environmental protection. CONCLUSIONS: Negative effects of waste from aquaculture to aquatic environment are increasingly recognized, though they were just a small proportion to land-based pollutants. Properly planned use of aquaculture waste alleviates water pollution problems and not only conserves valuable water resources but also takes advantage of the nutrients contained in effluent. It is highly demanding to develop sustainable aquaculture which keeps stocking density and pollution loadings under environmental capacity. RECOMMENDATIONS AND PERSPECTIVES: The traditional procedures for aquaculture waste treatment, mainly based on physical and chemical means, should be overcome by more site-specific approaches, taking into account the characteristics and resistibility of the aquatic environment. Further research needs to improve or optimize the current methods of wastewater treatment and reuse. Proposed new treatment technology should evaluate their feasibility at a larger scale for practical application.

BACKGROUND, AIM AND SCOPE: The presence of heavy metals in wastewater is one of the main causes of water and soil pollution. The aim of the present study was to investigate the removal of Cd, Cu, Pb, Hg, Mn, Cr and Zn in urban effluent by a biological wastewater treatment, as well as to quantify the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sn, Tl, V and Zn in dewatering sludge from the Biological Wastewater Treatment Plant to Ribeirão Preto (RP-BWTP), Brazil. MATERIALS AND METHODS: Concentrations of Cd, Cr, Cu, Mn and Pb in wastewater and those of Ni in sludge were determined by atomic absorption spectrophotometry with graphite furnace atomization. Mercury concentrations in wastewater were measured by hydride generation atomic spectrophotometry, and Zn levels were determined by atomic absorption spectrophotometry using acetylene flame. In sludge, the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Sn, Tl, V and Zn were determined by inductively coupled plasma-mass spectrometry. RESULTS: The percentages of removal efficiency (RE) were the following: Hg 61.5%, Cd 60.0%, Zn 44.9%, Cu 44.2%, PB 39.7%, Cr 16,5% and Mn 10.4%. In turn, the mean concentrations (mg/kg) of metals in dewatering sludge followed this increasing order: Tl (<0.03), Hg (0.31), Be (0.43), As (1.14), Cd (1.34), V (59.2), Pb (132.1), Sn (166.1), Cr (195.0), Mn (208.1), Ni (239.4), Cu (391.7), Zn (864.4) and Fe (20537). DISCUSSION: The relationship between metal levels in untreated wastewater, as well as the removal efficiency are in agreement with previous data from various investigators, It is important to note that metal removal efficiency is not only affected by metal ion species and concentration, but also by other conditions such as operating parameters, physical, chemical, and biological factors. CONCLUSIONS: Metal values recorded for treated wastewater and sludge were within the maximum permitted levels established by the Environmental Sanitation Company (CETESB), São Paulo, Brazil. RECOMMENDATIONS: There is an urgent need for the authorities who are responsible for legislation on sludge uses in agriculture of establishing safety levels for As, Be, Hg, Sn, Tl and V. PERSPECTIVES: According to the current metal levels, RP-BWTP sludge might be used for agriculture purposes. However, for an environmentally safe use of sewage sludge, further studies including systematic monitoring are recommended. Annual metal concentrations and predicted variations of those elements in the sludge should be monitored.

BACKGROUND, AIMS AND SCOPE: Sediments of the Spittelwasser creek are highly polluted with organic compounds and heavy metals due to the discharge of untreated waste waters from the industrial region of Bitterfeld-Wolfen, Germany over the course of more than one century. However, relatively few data have been published about the chloroorganic contamination of the sediment. This paper reports on the content of different (chloro)organic compounds with special emphasis on polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F), and chlorobenzenes. Existing concepts for the remediation of Spittelwasser sediment include the investigation of natural attenuation processes, which largely depend on the presence of an intact microbial food web. In order to gain more insight in terms of biological activity, we analyzed the capacity of sediment microflora to degrade organic matter by measuring the activities of extracellular hydrolytic enzymes involved in the biogeochemical cycling of carbon, nitrogen, phosphorus and sulfur. Furthermore, the detection of physiologically active bacteria in the sediment, particularly of those known for their capability to reductively dehalogenate organochlorine compounds, illustrates the potential for intrinsic bioremediation processes. METHODS: PCDD/F and chlorobenzenes were analyzed by gas chromatography(GC)/mass spectrometry and GC/flame ionization detection, respectively. The activities of hydrolytic enzymes were determined from freshly sampled sediment layers using 4-methylumbelliferyl (MUF) or 7-amino-4-methylcoumarin-conjugated model compounds and kinetic fluorescence measurements. Physiologically active bacteria from different sediment layers were microscopically visualized by fluorescence in situ hybridization (FISH). Specific bacteria were identified by 16S rRNA gene amplification and sequencing. RESULTS AND DISCUSSION: The PCDD/F congener profile was dominated by dibenzofurans. In addition, the presence of specific tetra and pentachlorinated dibenzofurans supported the assumption that extensive magnesium production was one possible source for the high contamination. A range of other chloroorganic compounds, including several isomers of chlorobenzenes, hexachlorocyclohexane and 1,1,1-trichloro-2,2-bis (p-chlorophenyl)ethane (DDT), was present in the sediment. Activities of extracellular hydrolytic enzymes showed a strong decrease in those sediment layers that were characterized by high contents of absorbable organic halogen (AOX), indicating disturbed organic matter decay. Interestingly, an abnormal increase of cellulolytic enzyme activities below the organochlorine-rich layers was observed, possibly caused by residual cellulose from discharges of sulfite pulping wastes. FISH revealed physiologically active bacteria in most sediment layers from the surface down to the depth of about 60 cm, including members of Desulfitobacterium (D.) and Sulfurospirillum. The presence of D. dehalogenans was confirmed by its partial 16S rRNA gene sequence. CONCLUSION: Results of chemical sediment analyses demonstrated high loads of organochlorine compounds, particularly of PCDD/F. Several years after stopping the waste water discharge to Spittelwasser creek, this sediment remains a main source for pollution of the downstream river system by way of the ongoing mobilization of sediment during high floods. As indicated by our enzyme activity measurements, the decomposition potential for organic matter is low in organochlorine-rich sediment layers. In contrast, the comparably higher enzyme activities in less organochlorine-polluted sediment layers as well as the presence of physiologically active bacteria suggest a considerable potential for natural attenuation. RECOMMENDATIONS AND PERSPECTIVE: From our data we strongly recommend to explore the degradative capacity of sediment microorganisms and the limits for in situ activity towards specific sediment pollutants in more detail. This will give a sound basis for the integration of bioremediation approaches into general concepts to reduce the risk that permanently radiates from this highly contaminated sediment.

GOALS, SCOPE AND BACKGROUND: It has been observed that hydrocarbon treated wastewaters still contain high COD and a number of intermediates. This suggests that the required catabolic gene pool for further degradation might be absent in the system or, that its titer value is not significant enough. By providing the desired catabolic potential, the overall efficiency of the treatment system can be improved. This study aims to demonstrate this concept by bioaugmentation of a lab-scale reactor treating refinery wastewater with a consortium having the capacity to complement the alkB genotype to the available microbial population. METHODS: Two reactors were set up using activated biomass collected from a refinery treatment plant and operated at a continuous mode for a period of 8 weeks. The feed to both reactors was kept constant. Crude oil was spiked regularly. One reactor was bioaugmented with a consortium previously described for crude oil spill remediation. The efficiency of the bioaugmented reactor was demonstrated by reduced COD. The changes in the microbial population over a period of time were analyzed by RAPD. Catabolic activity of the biomass in both reactors was monitored by PCR. The presence of the catabolic loci was confirmed by Southern Hybridization. RESULTS AND DISCUSSION: 52.2% removal of COD was observed in the bioaugmented reactor while only 15.1% reduction of COD was observed in the reactor without bioaugmentation. The change in microbial population can be seen from the 4th week, which also corresponds to improved catabolic activity. The presence of the bedA locus was seen in all samples, which indicates the presence of aromatic degraders, but the appearance of the alkB locus, from the 6th week onwards, which was observed only in the samples from the bioaugmented reactor. The results suggest that the gene pool of the bioaugmented reactor has catabolic loci that can degrade accumulated intermediates, thus improving the efficiency of the system. CONCLUSIONS: In this study, improvement of efficiency of bioremediation was demonstrated by addition of catabolic loci that are responsible for degradation. Bioaugmentation was carried out in biomass that was collected from an ETP (effluent treatment plant) treating hydrocarbon containing wastewater to study the strategies for improvement of the treatment system. Biostimulation, only marginally improved the efficiency, when compared to bioaugmentation. The improved efficiency was demonstrated by COD removal. The presence of the alkB locus suggests the importance of a catabolic gene pool that acts on accumulated intermediates. It is well documented that straight chain aliphatics and intermediates of aromatic compounds after ring cleavage, accumulate in refinery wastewater systems, thereby hindering further degradation of the wastewater. Supplementation of a catabolic gene pool that treats the lower pathway compounds and alkanes will improve the overall efficiency. In this study, results suggest that the alkB locus can also be used to monitor the degradative mode of the activated biomass. RECOMMENDATIONS AND PERSPECTIVE: . Pollution from petroleum and petroleum products around the globe are known to have grave consequences on the environment. Bioremediation, using activated sludge, is one option for the treatment of such wastes. Effluent treatment plants are usually unable to completely degrade the wastewater being treated in the biological unit (the aerator chambers). The efficiency of degradation can be improved by biostimulation and bioaugmentation. This study demonstrates the improved efficiency of a treatment system for wastewater containing hydrocarbons by bioaugmentation of a consortium that supports degradation. Further experiments on a pilot scale are recommended to assess the use of bioaugmentation on a large scale. The use of molecular tools, like DNA probes for alkB, to monitor the system also needs to be explored.

GOAL, SCOPE AND BACKGROUND: One of the burning problems of our industrial society is the high consumption of water and the high demand for clean drinking water. Numerous approaches have been taken to reduce water consumption, but in the long run it seems only possible to recycle waste water into high quality water. It seems timely to discuss alternative water remediation technologies that are fit for industrial as well as less developed countries to ensure a high quality of drinking water throughout Europe. MAIN FEATURES: The present paper discusses a range of phytoremediation technologies to be applied in a modular approach to integrate and improve the performance of existing wastewater treatment, especially towards the emerging micro pollutants, i.e. organic chemicals and pharmaceuticals. This topic is of global relevance for the EU. RESULTS: Existing technologies for waste water treatment do not sufficiently address increasing pollution situation, especially with the growing use of organic pollutants in the private household and health sector. Although some crude chemical approaches exist, such as advanced oxidation steps, most waste water treatment plants will not be able to adopt them. The same is true for membrane technologies. DISCUSSION: Incredible progress has been made during recent years, thus providing us with membranes of longevity and stability and, at the same time, high filtration capacity. However, these systems are expensive and delicate in operation, so that the majority of communities will not be able to afford them. Combinations of different phytoremediation technologies seem to be most promising to solve this burning problem. CONCLUSIONS: To quantify the occurrence and the distribution of micropollutants, to evaluate their effects, and to prevent them from passing through wastewater collection and treatment systems into rivers, lakes and ground water bodies represents an urgent task for applied environmental sciences in the coming years. RECOMMENDATIONS: Public acceptance of green technologies is generally higher than that of industrial processes. The EU should stimulate research to upgrade existing waste water treatment by implementing phytoremediation modules and demonstrating their reliability to the public.