Ontario is Canada’s provincial leader in wind energy, with over 4000 MW of installed capacity supplying approximately five percent of the province’s electricity demand. Wind energy is now one of the fastest-growing sources of renewable power in Canada and many other countries. However, its possible negative impact on population health, as a new source of environmental noise, has raised concerns for people living in proximity to wind turbines (WTs). The aims of this study were to assess the effect of individual differences and annoyance on the self-reported general health and health-related quality of life (QOL) of nearby residents, using a pre- and post-exposure design. Prospective cohort data were collected before and after WT operations, from the individuals (n = 43) in Ontario, Canada. General health and QOL metrics were measured using standard scales, such as SF12, life satisfaction scales developed by Diener (SWLS) and the Canadian Community Health Survey (CCHS-SWL). The mean values for the Mental Component Score of SF12 (p = 0.002), SWLS (p < 0.001), and CCHS-SWL (p = 0.044) significantly worsened after WT operation for those participants who had a negative attitude to WTs, who voiced concerns about property devaluation, and/or who reported being visually or noise annoyed.

Measurement of particle motion from an offshore piling event in the North was conducted to determine noise levels. For this purpose, a bespoken sensor was developed that was both autonomous and sensitive up to 2 kHz. The measurement was undertaken both for unmitigated and mitigated piling. Three different types of mitigation techniques were employed. The acceleration zero-to-peak values and the acceleration exposure levels were determined. The results show that inferred mitigation techniques reduce the levels significantly as well as decreases the power content of higher frequencies. These results suggest that mitigation has an effect and will reduce the effect ranges of impact on marine species.

The North Atlantic right whale (Eubalaena glacialis) faces increasing pressure from commercial shipping traffic and proposed marine renewable energy developments. Drawing upon the successful Stellwagen Bank National Marine Sanctuary model, we propose a multi-stakeholder marine spatial planning process that considers both appropriate positioning of offshore wind farms and redefining commercial shipping lanes relative to whale migration routes: placement of wind turbines within certain right whale habitats may prove beneficial for the species. To that end, it may be advisable to initially relocate the shipping lanes for the benefit of the whales prior to selecting wind energy areas. The optimal end-state is the commercial viability of renewable energy, as well as a safe shipping infrastructure, with minimal risk of collision and exposure to shipping noise for the whales. This opportunity to manage impacts on right whales could serve as a model for other problematic interactions between marine life and commercial activities.

One approach for reducing the level of environmental contamination threats around the world is to use renewable energy-harvesting equipment. Wind is a potential environmental resource that has become a desirable aspect of urban use due to advances in wind turbine design technology. Other variants have been developed based on the classic vertical-axis Savonius rotor model, which, according to experimental test findings and computational calculations, show higher operational characteristics performance. Generated power and shaft torque operational results are obtained by providing specific rotor blade shapes in these models, one of the most common designs, among small-scale rotor which uses a drag-based vertical axis whereas Savonius turbines having large-scale rotors not developed yet. This kind of rotor has the advantages of being simple to design, affordable, performing well at low speeds, and turns to flow direction independently. However, it was discovered that the Savonius rotor suffers through high quantity of negative torques created by the returning blade after a number of examinations into its performance. Many studies on various rotor types have been conducted to resolve the Savonius turbine’s performance constraints. The research showed and analyzed the difficulties and modification in design parameters of rotor, as well as their major impact on rotor performance.

One of most reduction reasons of simple conventional solar still productivity is the coupling between high solar intensity and the high ambient temperature in the same time. The high intensity increases the saline water temperature, while the outside temperature increases the glass temperature, and consequently reduction in saline water and glass temperature difference leads to reduction in condensation and productivity. The present theoretical study focuses on the completion of the absorbed solar energy in the basin to be constant during the day. The basin water will be in high temperature level all day especially at the time of low outside temperature far away the noon. The absorbed heat in the basin is held constant at αw Iₘₐₓ by extra heat from wind turbine power with battery storage system all day hours. The results show that the solar still productivity with constant heat supply is more than that with same amount of variable energy during sun rise time only (6 AM to 6 PM) by 69.133%. So, constant absorbed heat in the water basin (αw Iₘₐₓ) through the 24 h of the day enhances the performance with productivity up to 248% with the hybrid solar and electric power consumption of the wind turbine power. The water in the basin is held constant at 2 cm via makeup water to compensate the evaporation rate.

In the last few decades, wind energy has become a significant source of the renewable energy system, and it is essential to use wind energy for generating power and run the wind turbine system (WTs) at a higher level. With the rapid penetration of wind energy in the distributed generation system (DGS) and isolated micro-grid (MG), the WT runs at its optimal energy conversion output. For this, WT has to track or drive at the optimal power point tracking algorithm. However, various publications are available on MPPT algorithms for wind energy system (WES) applications, making a choice on exact trackers for a particular algorithm because each tracker has its advantages and disadvantages. Therefore, our primary goal is to review and evaluate the exact tracking algorithm for WES applications in this manuscript. To introduce the power controller, it is essential to track maximum power despite wind energy results. Besides, many algorithms have been evaluated, and their maximum output is achieved compared to their performance. This research paper will help researchers provide an accurate reference for future recommendations by selecting the best tracking algorithms in WES.

This paper analyzes the adoption of an off-grid hybrid renewable energy system (HRES) for a high-rise building owned by a public institution in Nigeria. The analysis is based on the comparison between the use of a single criterion and multiple criteria in the selection of the most feasible energy system. The proposed HRES comprises of a wind turbine, diesel generator, photovoltaic (PV), and battery storage system. Hybrid optimization of multiple energy resources (HOMER) software was used to design the HRES for a case study (based on a single criterion-total net present cost), while Evaluation Based on Distance from Average Solution (EDAS) method was used to evaluate the effect of choosing an optimal system based on multiple criteria. Based on the simulations conducted with HOMER, eight feasible HRES (ES1-ES8) were identified. When the feasible HRES were ranked based on total (NPC), the optimal configuration comprises 70 kW PV modules, 20 kW diesel generating set, 40 kW converter, and 70, 3000 Ah batteries. The results obtained from the optimization process were subjected to a multi-criteria analysis based on sustainability principles. The ranking of the first two systems (ES1 and ES2) returned by single criterion (total NPC) remained the same, while changes were observed in the ranks of the remaining systems (ES3–ES8). This modular feasibility study shows that it would be economical to power the entire university using HRES. It is expected that this study would help the university communities and other stakeholders make informed decision during the planning stage of similar projects.

Energy is the source of economic growth, and energy consumption indicates the country’s state of development. Energy engineering is a relatively new technical discipline. It is increasingly considered as a significant step in meeting carbon reduction targets, which can produce a variety of appealing outcomes that are useful to humanity’s evolution. Many countries have adopted national policies to decrease pollution by reducing fossil fuel use and increasing renewable energy usage by alleviating climate change (wind and solar, etc.). The ever-growing need for renewable sources has led to economic and technological problems, such as wind energy, essential for effective grid control, and the design of a wind project. Precise estimates offer network operators and power system designers vital information for the generation of an appropriate wind turbine and controlling demand and supply power. This work provides an in-depth study of the proliferation of artificial intelligence (AI) in the prediction of wind energy generation. The devices employed to calculate wind speed are examined and discussed, with a focus on studies recently published. This review’s findings show that AI is being employed in power wind energy measurement and forecasts. When compared to individual systems, the hybrid AI system gives more accurate findings. The discussion also found that correct handling and calibration of the anemometer can increase predicting accuracy. This conclusion suggests that increasing the accuracy of wind forecasting can be accomplished by lowering equipment errors that measure the meteorological parameter and mitigate carbon emission.

Development and trend of global wind tunnel research from 1991 to 2014 were evaluated by bibliometric analysis. Based on the statistical data from Science Citation Index Expanded from Web of Science, publication performance of wind tunnel research was analyzed from various aspects, including publication output, category distributions, journals, countries, institutions, leading articles, and words analysis. The results show that scientific articles associated with wind tunnel increased dramatically, with Journal of Wind Engineering and Industrial Aerodynamics as the most productive journal. The USA has been leading in publication output since 1991, while China has become a new-rising force of wind tunnel research. NASA was the dominant institution in wind tunnel field which published most single institution articles and nationally and internationally collaborative articles. The citation lifecycles of the leading articles exhibited different patterns of their trends, but all reached a plateau in certain years. Based on synthesized analysis of title words, abstract words, author keywords, and KeyWords Plus, computational fluid dynamic (CFD) was found to be a hot issue, which needs experimental validation by wind tunnels. Wind loads and wind turbine also caused increasing attentions while lepidoptera and sex pheromone were less studied. In the wind tunnel articles, numerical simulation of CFD was increasingly mentioned while field measurement showed minor change, suggesting the rapid developments of CFD.

Seaports are considered one of the sources involved in the deterioration of the maritime environment due to the excessive amount of exhaust gases emitted from their activities. The majority of seaports depend on the national electric grid as a source of power for the domestic and ships’ electric demands. This paper discusses the possibility of shifting ports from relying on the national grid electricity to green power-based ports. Offshore wind turbines and fuel cell units appear as two typical promising clean energy sources for ports. As a case study, the paper investigates the prospect of converting Alexandria Port in Egypt to be an eco-friendly port with the study of technical, logistic, and financial requirements. The results show that the fuel cell, followed by a combined system of wind turbines and fuel cells, is the best choice regarding electricity production unit cost by 0.101 and 0.107 $/kWh, respectively. Furthermore, using fuel cells and offshore wind turbine as a green power concept will achieve a reduction in emissions’ quantity of CO₂, NOx, and CO emissions by 80,441, 20,814, and 133,025 ton per year, respectively. Finally, the paper highlights the role that renewable energy can play when supplying Alexandria Port with green energy to lift the burden on the government in supporting the electricity, with a possibility of achieving a profit from 3.85 to 22.31% of the annual electricity cost compared with the international prices.