Arsenic mobility around mining districts is primarily controlled by distribution and abundance of iron minerals. Arsenite-rich mine waters although frequently reported, the interaction of which with schwertmannite is poorly understood despite its high toxicity and mobility. We examined three synthetic schwertmannite types distinguished by surface area (19.9–227.5 m2/g), Fe/S molar fractions (4.7–6.6), and saturation index (−1.6–0.8) towards arsenite retention through controlled batch equilibrium studies at 22 ± 2°C and 1 atmospheric pressure in oxic conditions. Sorption isotherms were investigated as a function of dissolved arsenite concentrations (0.13–1.33 mmol/L) at constant sediment load (10 g/L) and pH (3.0) in order to understand the role of synthesis pathway and physicochemical properties on arsenite immobilization. Multilayer surface coverage with more than one process governs arsenite uptake. X-ray diffractograms, infrared spectroscopy, and high resolution electron microscopic examination revealed new phase formation where schwertmannite underwent morphological and structural degradation. Ionic exchange between schwertmannite SO 4 2− and aqueous arsenite has resulted in an elevated aqueous SO 4 2− that varied according to dissolved arsenite concentrations. Stoichiometric calculations showed that 1 mol of dissolved arsenite can effectively replace 0.12–0.19 mol of schwertmannite SO 4 2− . This study implies that schwertmannites can be used as potential adsorbents for arsenite treatment where the total uptake will be strongly controlled by both ion exchange and surface precipitation.

The textile industry is known to generate large quantities of effluents contaminated with dyes that are not fixed to the fibers during the dyeing process. The available technologies to remove these dyes from the wastewater are expensive and ineffective. Within this context, low-cost, easy-maintenance technologies for the removal of dyes have been studied, such as adsorption on aquatic macrophytes. Thus, the macrophyte Salvinia sp., raw or pretreated with NaOH or H₃PO₄, was used as biosorbent of Blue 5G reactive dye. The study showed that pH and temperature affect the dye removal capacity. The analysis of the infrared spectrum (FTIR) showed that chemical treatment of the Salvinia sp. modified the biomass surface and affected dye adsorption capacity. The pseudo-second-order kinetic model satisfactorily described the experimental data for raw and NaOH-pretreated biomass, and the pseudo-first-order model was more appropriate to describe the experimental data obtained with H₃PO₄-pretreated biomass. The highest capacity of Blue 5G dye removal was obtained with raw biomass, at 333 K and pH 1.0, with 98.35 % adsorption.

The aim of this work was to evaluate the role of three biopolymers used as coagulant–flocculant aids in the treatment of a high-load cosmetic industry wastewater (WW) located in Mexico. Discussion is based on a surface response methodology. When using guar, locust bean gum, and Opuntia mucilage, conductivity and turbidity removals as high as 20.1 and 67.8 % were found, respectively. Chemical oxygen demand (COD) removals as high as 38.6 % were observed. The maximum removal efficiency was found for mucilage, with 21.1 mg COD/mg polymer. At the end of the process, pH was in the range of 5.8–7.3 for an initial wastewater pH value of 5.6. The production of sludge was very dependent on the WW organic load. An analysis of some metal content in the sludges is presented. From the response surface analysis, it was observed that the parameter which strongly affected the removal of COD, turbidity, oil and greases (O&G), and the amount of sludge including their metal contents was the polymer dose. Only in the case of O&G removal was a combination of dose–wastewater organic load responsible for the removals. The values of R ² for the correlation process were between 0.5451 (O&G) and 0.7989 (COD). The p values for the different expressions were between 0.1985 (COD) and 0.7195 (O&G). The values of adequate precisior (AP) indicate how feasible it is to use the surface response analysis (AP > 4). Most of the analysis indicated that AP > 4, except in the case of the O&G removal analysis where AP = 2.9.

Microcosm experiments on the behaviour of Se, Cr and Co were carried out with mangrove sediments from Sepetiba Bay, Brazil. Three 8-cm length sediment cores were covered with tidal water spiked with ⁷⁵Se, ⁵¹Cr and ⁶⁰Co to evaluate its behaviour within the sediments. Two cores retained almost all activities (99–100 %) within the uppermost centimetre layer, while the third core presented a deeper penetration of all radiotracers, displaying a second activity peak at the 3–4-cm depth interval, which evidenced benthic fauna bioturbation influence. This influence extended the diffusion into depths in which mangrove rhizosphere can retain the elements, suggesting increased retention efficiency. This mechanism of retention enhancement was proposed in addition to previous conceptual models describing trace elements behaviour in mangrove sediments. Increased bioturbation and rhizosphere development will probably increase this effect, while mangrove plant cover losses may promote a less efficient retention of elements recently diffused from tidal water.

Air pollution emissions were not continually monitored in the Upper Silesian Industrial District (USID), southern Poland, and data is only available for the last 20 years. Long-lasting and severe tree ring reductions in pines growing 5–20 km north of the USID area recorded particularly high levels of air pollution emissions in the period 1950–1990. Especially high amounts of reductions and many missing rings were found in the period 1964–1981. At the same time, pines growing 60 km west of the USID do not record deep ring reductions; this proves that the phenomenon is of a regional nature. Increases in infant mortality and lung, bronchial, and tracheal cancer morbidity rates among males were also recorded in the USID during periods of high air pollution. Infant mortality rates increased several years after the tree ring reductions. Therefore, it may be possible to use tree ring reductions as an early indicator of the occurrence of adverse effects on human health.

The embryos of a marine abalone, Haliotis diversicolor supertexta, were exposed to a typical environmental estrogen, 17α-ethynylestradiol (EE2), for 96 h, to examine the acute toxicity of EE2 to the embryogenesis of the abalone. A marine diatom, Navicula incerta, was used in the test media as settlement substrate and food for the abalone larvae. During the embryo culture, more than 30 % of EE2 could be removed from the test media by the diatom, mainly via biodegradation, leading to a decrease of water-borne exposure dose. Further, the exposure concentrations of EE2 around the living microenvironment of the abalone larvae could be magnified 350–468 times after the larvae settled on the diatom, as indicated by the bioconcentration factors of EE2 in the diatom. Increased bioaccumulation of EE2 in the diatom caused greater inhibition on the metamorphosis of the abalone larvae by enhancing the uptake of EE2 in the larvae via dietary exposure, while declined water-borne exposure dose did not affect the embryonic toxicity of EE2 and its uptake in the abalone larvae. The 96-h median effective concentration of EE2 to the metamorphosis of the abalone larvae was 10.01 μg L⁻¹, when the exposure doses in both the test media and the diatom were controlled stable. The 96-h hazard concentration for 5 % of the species was 1.20 μg L⁻¹, which was still higher than but close to the reported upper contamination level of EE2 and could be employed as the safety threshold for the metamorphosis of the abalone embryos.

Boehmite was used for the removal of fluoride ions from aqueous solutions in a batch system. The pH, contact time, and fluoride concentration in the removal of fluoride ions by boehmite were evaluated. The removal of fluoride ions by boehmite was the highest between the pH values of 4.5 and 7.5. The kinetic fluoride sorption from aqueous solutions by boehmite was best described by the pseudo-second-order model, and equilibrium was reached in about 24 h. The Freundlich model described the isotherm sorption process; the results indicate that the sorption mechanism is chemisorption on a heterogeneous material.

Development of treatment technologies to alleviate water pollution has been a challenging and demanding task for researchers. Furthermore, synthetic dyes fabricated of complex aromatic structures turned out to be a great hazard as they impart color to water reservoirs making them abhorrent for human use. Reactive dyes being water soluble prove difficult to be eliminated by conventional treatment technologies. In recent times, biosorption has gained prominence as a finishing technology to remove pollutants being cost-effective and environment friendly. This paper describes the hazards posed by dyeing effluents, exclusively reactive dyes, on the environment and use of various biosorbents to remove reactive dyes from aqueous solution under optimum physicochemical parameters. Enhancement of biosorption capacity by chemical treatment and immobilization; equilibrium, kinetic and thermodynamic modeling of biosorption process; characterization by FTIR and SEM and regeneration of biosorbents is also plainly and comprehensively discussed.

The bioaccessibilities of trace metals (Cd, Cr, Cu, Ni, Pb, Zn) in eelgrass, sediment and preparations thereof with and without antifouling paint particles have been assessed by undertaken a physiologically based extraction test (W-PBET) designed to mimic the chemistry of the gizzard and intestine of the mute swan, Cygnus olor. Because Cu- and Zn-based pigments are employed in contemporary antifouling paints, concentrations of these metals were greatest in the preparations containing paint particles. Moreover, relative to total metal, both Cu and Zn displayed the highest gizzard bioaccessibilities in these preparations (about 10%). In the intestine, where most nutrients are absorbed, the accessibility of Cu was maintained while that of Zn was dramatically reduced. These observations were qualitatively consistent with metal concentrations measured in source materials relative to those in swan faeces. We conclude that Cu poses the greatest threat to C. olor inhabiting coastal areas where boat repair takes place.

Phosphorus (P) releases to the environment have been implicated in the eutrophication of important water bodies worldwide. Current technology for the removal of P from wastewaters consists of treatment with aluminum (Al) or iron (Fe) salts, but is expensive. The neutralization of acid mine drainage (AMD) generates sludge rich in Fe and Al oxides that has hitherto been considered a waste product, but these sludges could serve as an economical adsorption media for the removal of P from wastewaters. Therefore, we have evaluated an AMD-derived media as a sorbent for P in fixed bed sorption systems. The homogenous surface diffusion model (HSDM) was used to analyze fixed bed test data and to determine the value of related sorption parameters. The surface diffusion modulus Ed was found to be a useful predictor of sorption kinetics. Values of Ed < 0.2 were associated with early breakthrough of P, while more desirable S-shaped breakthrough curves resulted when 0.2 < Ed < 0.5. Computer simulations of the fixed bed process with the HSDM confirmed that if Ed was known, the shape of the breakthrough curve could be calculated. The surface diffusion coefficient D ₛ was a critical factor in the calculation of Ed and could be estimated based on the sorption test conditions such as media characteristics, and influent flow rate and concentration. Optimal test results were obtained with a relatively small media particle size (average particle radius 0.028 cm) and resulted in 96 % removal of P from the influent over 46 days of continuous operation. These results indicate that fixed bed sorption of P would be a feasible option for the utilization of AMD residues, thus helping to decrease AMD treatment costs while at the same time ameliorating the impacts of P contamination.