The sensitivity of corals and their Symbiodinium to warming has been extensively documented; however very few studies considered that anthropogenic inputs such as metal pollution have already an impact on many fringing reefs. Thus, today, nickel releases are common in coastal ecosystems. In this study, two major reef-building species Acropora muricata and Pocillopora damicornis were exposed in situ to ambient and moderate nickel concentrations on a short-term period (1h) using benthic chamber experiments. Simultaneously, we tested in laboratory conditions the combined effects of a chronic exposure (8weeks) to moderate nickel concentrations and ocean warming on A. muricata. The in situ experiment highlighted that nickel enrichment, at ambient temperature, stimulated by 27 to 47% the calcification rates of both species but not their photosynthetic performances. In contrast, an exposure to higher nickel concentration, in combination with elevated temperature simulated in aquaria, severely depressed by 30% the growth of A. muricata.

Harmful algal blooms (HABs) have broken out frequently throughout the world in recent decades; they are caused by the rapid multiplication of algal cells in near-coastal waters polluted with nitrogen and phosphorus and greatly affect the quality of marine water and human health. Over the past several decades, climate change and increasing environmental degradation have provided favourable growth conditions for certain phytoplankton species. Therefore, it is essential to rapidly identify and enumerate harmful marine algae to control these species. In this study, quantitative PCR (qPCR) was used to detect four representative species of HABs that are widespread in the marine water of Hong Kong, namely, Alexandrium catenella, Pseudo-nitzschia spp., Karenia mikimotoi and Heterosigma akashiwo. We applied qPCR with the dye SYBR Green to detect Alexandrium spp. and Pseudo-nitzschia spp. and used TaqMan probe for the enumeration of Karenia mikimotoi and Heterosigma akashiwo. The total genomic DNA of these algae from Hong Kong marine water was extracted successfully using the CTAB method, and for each kind of alga, we constructed a ten-fold series of recombinant plasmid solutions containing certain gene fragments of 18S rDNA and ITS1-5.8S-ITS2 as standard samples. Ten-fold dilutions of the DNA of known numbers of the extracted algal cells were also used to create an additional standard curve. In this way, the relationship between the cell number and the related plasmid copy number was established. The qPCR assay displayed high sensitivity in monitoring marine water samples in which the low concentrations of harmful algae were not detected accurately by traditional methods. The results showed that the cell numbers of the four species were all in low abundance. For Alexandrium catenella, the cell abundances at 12 sites ranged from 3.8×102 to 4.3×103cellsL−1, while H. akashiwo, K. mikimotoi and Pseudo-nitzschia ranged from 1.1×102 to 1.3×103, from 23 to 6.5×102 and from 45 to 3.3×103cellsL−1, respectively. The concentrations of these algae were much lower than those observed during outbreaks of HABs in Hong Kong. These results may be useful for local aquaculture development and may provide effective suggestions and a theoretical basis for HAB monitoring and management.

An oil plume model to simulate the behavior of oil from spills located at any given depth below the sea surface is presented, following major modifications to a plume model developed earlier by Malačič (2001) and drawing on ideas in a paper by Yapa and Zheng (1997). The paper presents improvements in those models and numerical testing of the various parameters in the plume model. The plume model described in this paper is one of the numerous modules of the well-established MEDSLIK oil spill model. The deep blowout scenario of the MEDEXPOL 2013 oil spill modelling exercise, organized by REMPEC, has been applied using the improved oil plume module of the MEDSLIK model and inter-comparison with results having the oil spill source at the sea surface are discussed.

The leakage of large plastic litter (macroplastics) into the ocean is a major environmental problem. A significant fraction of this leakage originates from coastal cities, particularly during extreme rainfall events. As coastal cities continue to grow, finding ways to reduce this macroplastic leakage is extremely pertinent. Here, we explore why and how coastal cities can reduce macroplastic leakages during extreme rainfall events. Using nine global cities as a basis, we establish that while cities actively create policies that reduce plastic leakages, more needs to be done. Nonetheless, these policies are economically, socially and environmentally cobeneficial to the city environment. While the lack of political engagement and economic concerns limit these policies, lacking social motivation and engagement is the largest limitation towards implementing policy. We recommend cities to incentivize citizen and municipal engagement with responsible usage of plastics, cleaning the environment and preparing for future extreme rainfall events.

The present study investigates the effect of the TiO2 nanofluid on the formation of hydrocarbon, carbon-monoxide, nitrogen oxide and smoke emission from a neat mustard oil methyl ester fueled diesel engine. TiO2 nano particle with an average size of 50 nm was synthesized by sol-gel route. The synthesized particles are dispersed with mustard oil methyl ester at various concentrations (100 and 200 ppm) by the means of a mechanical homogenizer and an ultrasonicator. Experiments were conducted in a four-stroke, single-cylinder, diesel-engine, fuelled with diesel, neat mustard oil methyl ester and nanofluid incorporated methyl ester. From the obtained results, it can be recognized that methyl ester from mustard oil is potential candidate as an alternative fuel in existing diesel engine. Further, it is also observed that TiO2 nanofluid associated to mustard oil methyl ester reduced various emissions over neat mustard oil methyl ester.

To remove benzo[a]pyrene (BaP) that has accumulated in the Jiaozhou Bay wetland sediment, two strains (JB1 and JB2) were selected from the BaP-contaminated the wetland sediment and immobilized in coal cinder and chitosan beads using entrapping and surface adsorption methods. Biodegradation of BaP in sediment was carried out in pots. The results showed that, supported by the coal cinder and chitosan beads, 71.9, 65.5, 58.9 and 66.1% of the BaP in the immobilized cells was degraded after 40d. These percentages were clearly higher than the 47.7% that degraded from free cells. Kinetic analysis indicated that the immobilized gel-beads might remove BaP by multiple control steps. Compared to the chitosan, coal cinder-entrapping beads exhibited a higher removal rate for BaP; however, the degradation rates from coal cinder- and chitosan-surface adsorption beads were almost the same. This result indicates that in addition to the BaP-degrading bacteria, carrier materials and immobilizing methods play an important role in determining the success of a biodegradation strategy.

The production of melanin is a complex process involving biochemical cascades, such as the pro-phenoloxidase (proPO) system, and enzymes, such as phenoloxidases (POs). Different studies have shown a strong correlation between the decrease in PO activities and the occurrence of diseases in bivalve invertebrates, leading to mortalities in the host. Results of these studies suggest that POs could play a fundamental role in defense mechanisms in bivalves. This article reviews the fundamental knowledge on the proPO system in bivalves and the methods used to assess PO activities. Finally, this is the first report on the major findings of laboratory and field studies that indicate that a type of PO in bivalves, the laccase enzyme, is inducible and involved in the 1) immune 2) antioxidant and 3) detoxification roles in bivalves, and might be an ecological potential biomarker of environmental stress.

To determine sources of organic material in semi-enclosed Bohai Sea, samples of marine surface sediments, suspended particulates in adjacent rivers and atmospheric deposition were collected and analyzed for grain size composition, total organic carbon(TOC and POC), total nitrogen (TN and PN), and stable isotopic composition (δ13C and δ15N). Measured bulk C/N ratio (5.50–12.28), δ13C (−23.59~−19.54‰), and δ15N (2.80–8.07‰) values of surface sediment organic materials indicated a mixed source of marine and terrestrial contributions. Spatial distribution of organic C, N and their stable isotope composition indicated a land-sea gradient of organic material content and source combination. Using MixMIR model with dual isotopes, it was estimated that relative contributions of marine, riverine, and atmospheric sources to sediment mixture were 69.0%, 9.6%, and 21.4%, respectively. Our results demonstrated the advantage of Bayesian isotope mixing models over the conventional end-member mixing models for source apportionment in coastal seas with complex source origins.

The spread of non-native species has been a subject of increasing concern since the 1980s when human-mediated transportation, mainly related to ships' ballast water, was recognized as a major vector for species transportation and spread, although records of non-native species go back as far as 16th Century. Ever increasing world trade and the resulting rise in shipping have highlighted the issue, demanding a response from the international community to the threat of non-native marine species. In the present study, we searched for available literature and databases on shipping and invasive species in the North-eastern (NE) and South-western (SW) Atlantic Ocean and assess the risk represented by the shipping trade between these two regions. There are reports of 44 species associated with high impacts for the NE Atlantic and 15 for the SW Atlantic, although this may be an underestimate. Vectors most cited are ballast water and biofouling for both regions while aquaculture has also been a very significant pathway of introduction and spread of invasive species in the NE Atlantic. Although the two regions have significant shipping traffic, no exchange of invasive species could be directly associated to the shipping between the two regions. However, it seems prudent to bring the exchange of ballast water between the two regions under control as soon as possible.

The major objectives of the study were to test the hypothesis of the Zarrin-Gol River as a reference site for ecotoxicological studies and to assess the contamination degree of heavy metals and metalloids in the river using four contamination indices. For these purposes, eleven heavy metal and metalloid concentrations were analyzed. The average concentrations (mgkg−1) in the sediments were: 37.67 (chromium) 286.28 (manganese), 13,751.04 (iron), 8.79 (cobalt), 12.39 (nickel), 32.68 (zinc), 21.91 (arsenic), 40.59 (selenium), 2923.86 (aluminum), ND (silver) and 785.96 (magnesium). Contamination factor, enrichment factor, pollution load index, and geoaccumulation index were calculated to evaluate the contamination degree and influence of human activities on heavy metal levels. The contamination indices of the sediment samples showed that arsenic and selenium were the highest pollutants. The results indicated that the Zarrin-Gol River could not be used as a reference site at least for arsenic and selenium.