Soil microorganisms represent one of the largest biodiversity reservoirs. However, most low-abundance, slow-growing or dormant microorganisms in soils are difficult to capture with traditional enrichment culture methods. These types of microorganisms represent a valuable “microbial seed bank”. To better exploit and utilize this “microbial dark matter”, we developed a novel strategy that integrates single-cell-level isolation with microfluidics technology and culture with resuscitation-promoting factor (Rpf) to isolate biphenyl-degrading bacteria from four typical soils (paddy soil, red soil, alluvial soil and black soil) in eastern China. Multitudinous bacteria were successfully isolated and cultured; some of the identified clades have not been previously linked to biphenyl biodegradation, such as Actinotalea, Curtobacterium and Rothia. Soil microcosmic experiments validated that some bacteria are responsible for biphenyl degradation in soil. In addition, genomic sequencing and Illumina MiSeq sequencing of 16S rRNA genes indicated that exogenous Rpf mainly promotes the recovery and growth of bacteria containing endogenous Rpf-encoding genes. In summary, this study provides a novel strategy for capturing target functional microorganisms in soils, indicates potential bioresources for the bioremediation of contaminated soils, and enhances our current understanding of the mechanisms involved in the response to exogenous Rpf.

In recent years, the application of green rusts (GRs) for water purification has received significant attention, but its full understanding has not been well achieved. Then, the comprehension about the synthesis and characteristics of GRs can highly favor their decontamination performances for the site-specific conditions. This review comprehensively summarized the synthesis, characteristics and performances of GRs including the GR (Cl⁻), GR (CO₃²⁻) and GR (SO₄²⁻) for sequestration of various aqueous pollutants (e.g., tetrachloride, Cr(VI), Se(VI), and U(VI), etc.). Generally, the different reactivity of GRs toward contaminants is strongly dependent on the GRs’ characteristics (e.g., interlayer distance, specific surface area, and Fe(II) content) and solution chemistry (e.g., pH, background electrolytes, dissolved oxygen, and contaminant concentration, etc.). In addition, the reaction mechanisms of GRs with the contaminants involve the redox reactions, adsorption, catalytic oxidation, interlayer and octahedral incorporation, which can mutually or singly contribute to the decontamination to varying degrees. Particularly, this review addressed the transformation pathways of GRs under various solution chemistry conditions and clarified that the stability of GRs should be the key challenge for the real application. Finally, how to effectively use the GRs for water decontamination was proposed, which will significantly benefit the rational control of environmental pollution.

Scientific literature is full of works studying the removal of different pollutants from water through different Advanced Oxidation Processes (AOPs). Many of them only suggest it is reused for agricultural purposes or for small crops in pots. This study is based on the reuse of reclaimed agricultural wastewater contaminated with four insecticides (chlorantraniliprole, imidacloprid, pirimicarb and thiamethoxam) for growing lettuce in field conditions. First, solar photocatalysis with TiO₂/Na₂S₂O₈ was used on a pilot plant in a sunny area (Murcia, SE of Spain) as an environmentally friendly technology to remove insecticide residues and their main reaction intermediates from contaminated water. The necessary fluence (H, kJ m⁻²) to accomplish 90% removal (H₉₀) ranged from 0.12 to 1212 kJ m⁻² for pirimicarb and chlorantraniliprole, respectively. Only six (derived from imidacloprid, pirimicarb and thiametoxam) of 18 transformation intermediate products studied were detected in reclaimed water during the photoperiod (2000 kJ m⁻² of accumulated UVA radiation) although all of them were totally photodegraded after a fluence of 1250 kJ m⁻². Secondly, reclaimed agro-wastewater was used to irrigate two lettuce crops grown under greenhouse conditions and under agricultural field conditions. In no cases, insecticide residues nor their TIPs were noticed above their respective LOQs (limits of quantification) in soil and lettuce samples (between 0.03 and 0.04 μg kg⁻¹ for pirimicarb and 2.49 and 2.23 μg kg⁻¹ for thiamethoxam, respectively) when they were irrigated with reclaimed water, while residues of the four insecticides and some of their intermediates were found in soil and lettuce by the end of cultivation when they were irrigated with non-reclaimed contaminated water. According to the results, this technology can be applied in a sustainable way, mainly in areas with water scarcity and high solar radiation, contributing to water utilisation in drought areas and the use of renewable energy.

Stable nitrogen isotope (δ¹⁵N) technology has often been used as a powerful tool to separate nitrogen oxides (NOₓ) produced by residential combustion (i.e., biomass burning and coal combustion) from other sources. However, the insufficient measurement of δ¹⁵N-NOₓ fingerprints of these emissions limits its application, especially in North China where residential emissions are significant. This study conducted combustion experiments to determine the δ¹⁵N-NOₓ of typical residential fuels in North China, including ten biomass fuels and five types of coal. The results showed that the δ¹⁵N of biomass varied between −6.9‰ and 2.3‰, which was lower than the δ¹⁵N of residential coal (−0.2‰–4.6‰). After combustion, the δ¹⁵N of biomass residues increased greatly, while that of coal residues showed no significant upward trend (p > 0.05). The δ¹⁵N-NOₓ produced by biomass burning ranged from −5.6‰ to 3.2‰ (−0.4‰ ± 2.4‰), showing a significant linear relation with δ¹⁵N-biomass. Comparatively, the δ¹⁵N-NOₓ derived from residential coal combustion was much higher (16.1‰ ± 3.3‰), ranging from 11.7‰ to 19.7‰. It was not well correlated with δ¹⁵N-coal, and only slightly lower than the estimated δ¹⁵N-NOₓ of industrial coal combustion (17.9‰, p > 0.05). These observations indicate that the δ¹⁵N-NOₓ of residential coal combustion is a result of the mixture of thermal- and fuel-released NOₓ. Based on the isotopic characteristics observed in this study, we analyzed the reported δ¹⁵N-NOₓ, and provided more statistically robust δ¹⁵N-NOₓ distributions for biomass burning (1.3‰ ± 4.3‰; n = 101) and coal combustion (17.9‰ ± 3.1‰; n = 26), which could provide guidance for scientific studies aiming to quantify the origin of NOₓ in North China and in other regions.

Endocrine disrupting chemicals (EDCs) are a matter of great concern. They are ubiquitous in the environment, are considered harmful to humans and wildlife, yet remain challenging to identify based on current international test guidelines and regulatory frameworks. For a compound to be identified as an EDC within the EU regulatory system, a plausible link between an endocrine mode-of-action and an adverse effect outcome in an intact organism must be established. This requires in-depth knowledge about molecular pathways regulating normal development and function in animals and humans in order to elucidate causes for disease. Although our knowledge about the role of the endocrine system in animal development and function is substantial, it remains challenging to predict endocrine-related disease outcomes in intact animals based on non-animal test data. A main reason for this is that our knowledge about mechanism-of-action are still lacking for essential causal components, coupled with the sizeable challenge of mimicking the complex multi-organ endocrine system by methodological reductionism. Herein, we highlight this challenge by drawing examples from male reproductive toxicity, which is an area that has been at the forefront of EDC research since its inception. We discuss the importance of increased focus on characterizing mechanism-of-action for EDC-induced adverse health effects. This is so we can design more robust and reliable testing strategies using non-animal test methods for predictive toxicology; both to improve chemical risk assessment in general, but also to allow for considerable reduction and replacement of animal experiments in chemicals testing of the 21st Century.

Public health is threatened by air pollution and high temperature, especially in urban areas and areas impacted by climate change. Well-designed urban forms have co-benefits on promoting human health and mediating atmospheric environment-related threats (e.g., high temperature and air pollution). Previous studies overlooked these mediating effects of urban form on suicide mortality. This study used partial least squares modeling and countywide data in Taiwan to identify the crucial influences and pathways of urban environment, socioeconomic status, and diseases on suicide mortality. The model considered the impact of the characteristics of urban form (i.e., urban development intensity, land mix, and urban sprawl), urban industrial status (i.e., industrial level), urban greening (i.e., green coverage), disease (i.e., important diseases morbidity of human immunodeficiency virus [HIV], cerebrovascular disease [CVD], chronic liver disease and cirrhosis [CLDC], nephritis, nephrotic syndrome and nephrosis [NNSN], malignant tumor [MT]), socioeconomic status (i.e., income level and aging population rate), and the atmospheric environment (i.e., air pollution and high temperature) on suicide mortality. Optimizing land mix and minimizing urban development intensity and urban sprawl have been found to reduce suicide mortality. The mediating effect of urban form on suicide mortality originated from air pollution and high temperature, and mediating air pollution was greater than high temperature. Furthermore, industrial level, important diseases (HIV, CVD, CLDC, NNSN, and MT) morbidity, an aging population rate, air pollution, and high temperature were associated with an increase in suicide mortality, whereas green coverage and income level were associated with a reduction in suicide rates. The findings demonstrate that appropriate urban policy and urban planning may lower suicide mortality, be useful strategies for suicide prevention, and be a foundation for building a healthy city. Moreover, this study provides clarity on the complex relationship of suicide and the urban environment while identifying crucial factors.

With the rapidly increasing popularity of 5G mobile technology, the effect of radiofrequency radiation on human health has caused public concern. This study explores the effects of a simulated 3.5 GHz radiofrequency electromagnetic radiation (RF-EMF) environment on the development and microbiome of flies under intensities of 0.1 W/m², 1 W/m² and 10 W/m². We found that the pupation percentages in the first 3 days and eclosion rate in the first 2 days were increased under exposure to RF-EMF, and the mean development time was shortened. In a study on third-instar larvae, the expression levels of the heat shock protein genes hsp22, hsp26 and hsp70 and humoral immune system genes AttC, TotC and TotA were all significantly increased. In the oxidative stress system, DuoX gene expression was decreased, sod2 and cat gene expression levels were increased, and SOD and CAT enzyme activity also showed a significant increase. According to the 16S rDNA results, the diversity and species abundance of the microbial community decreased significantly, and according to the functional prediction analysis, the genera Acetobacter and Lactobacillus were significantly increased. In conclusion, 3.5 GHz RF-EMF may enhance thermal stress, oxidative stress and humoral immunity, cause changes in the microbial community, and regulate the insulin/TOR and ecdysteroid signalling pathways to promote fly development.

The problem of potentially toxic elements (PTEs) in farmland is a key issue in global pollution prevention and control and has an important impact on environmental safety, human health, and sustainable agricultural development. Based on the climate background of high–latitude cold regions, this study simulated freeze–thaw cycles through indoor tests. Different initial conditions, such as biochar application rates (0%, 1%, 2%) and different initial soil moisture contents (15%, 20%, 25%), were set to explore the morphological changes in cadmium (Cd) and lead (Pb) in soil and the response relationship to the changes in soil physicochemical properties. The results indicate that soil pH decreases during freeze–thaw cycles, and soil alkalinity increases with increasing biochar content. Freeze–thaw cycles caused the total amount of PTEs to have a U–shaped distribution, and the amount of PTEs in the soluble (SOL) and reducible (RED) fraction increased by 0.28–56.19%. Biochar reduced the amount of Cd and Pb migration in the soil, and an increase in soil moisture content reduced the availability of Cd and Pb in the soil. Freezing and thawing damaged the soil structure, and biochar reduced the fractionation of small particle aggregates by enhancing the stability of soil aggregates, thereby reducing the soil's ability to adsorb Cd and Pb. In summary, for farmland soil remediation and pollution control, the application of biochar has a certain ability to optimize soil properties. Considering the distribution of PTEs in the soil and the physicochemical properties of the soil, the application of 1% biochar to soil with a 20% moisture content is optimal for regulating seasonally frozen soil remediation.

Some organophosphate di-esters (di-OPEs) have been found to be more toxic than their respective tri-esters. The environmental occurrence of di-OPEs remains largely unclear. A total of 106 water samples, including 56 drinking water (bottled, barreled, and tap water) and 50 surface water (lake and river) samples were collected and analyzed for 10 organophosphate tri-esters (tri-OPEs) and 7 di-OPEs. The concentrations (range (median)) of ∑₇di-OPE were 2.8–22 (9.7), 1.1–5.8 (2.6), 3.7–250 (120), 13–410 (220), and 92–930 (210) ng/L in bottled water, barreled water, tap water, lake water, and river water, respectively. In all types of water samples, tris(1-chloro-2-propyl) phosphate was the dominant tri-OPE compound. Diphenyl phosphate was the predominant di-OPE compound in tap water and surface water, while di-n-butyl phosphate and bis(2-ethylhexyl) phosphate was the dominant compound in bottled water and barreled water, respectively. Source analysis suggested diverse sources of di-OPEs, including industrial applications, effluents of municipal wastewater treatment plants, degradation from tri-OPEs during production/usage and under natural environmental conditions. The non-carcinogenic and carcinogenic risks of OPEs were lower than the theoretical threshold of risk, indicating the human health risks to OPEs via drinking water consumption were negligible. More studies are needed to explore environmental behaviors of di-OPEs in the aquatic environment and to investigate ecological risks.

Aging is an important natural process affecting the physiochemical properties of biochar, while mechanistic understanding of its effect on the adsorbed heavy metals is still lacking. After adsorption of Cd²⁺ and Pb²⁺, biochars produced from wheat straw (WS) and maize straw (MS) at 300 and 500 °C (denoted as WS300, WS500, MS300, and MS500, respectively) were subjected to 60 cycles of wet–dry or freeze–thaw aging. The results showed that simulated aging treatment transformed the Cd²⁺ and Pb²⁺ adsorbed on the low-temperature biochars from the readily and potentially bioavailable fractions into the non-bioavailable one, while the fractionation of Cd²⁺ and Pb²⁺ adsorbed on WS500 and Pb²⁺ on MS500 barely changed. Spectroscopic characterization revealed that simulated aging enhanced the complexation of Cd²⁺ and precipitation of Pb²⁺ on the biochars. These findings suggest that heavy metals could be effectively immobilized on low-temperature biochars amended to contaminated soils in the long term.