Microplastics (MPs) pollution in Tangxun Lake, the largest urban lake in China, was investigated. The average MPs pollution in sediment (1.81 ± 1.75 × 10⁴ items kg⁻¹) is at a high level, while the MPs in lakeshore water (917.77 ± 742.17 items m⁻³) is in the middle to low level compared with existing studies, which is related to the government's protection. Fragments and fibers are the most common shapes in sediment and water, respectively. MPs size <1 mm dominates in the sediment, while the MPs in water has a larger size. The distribution of MPs in the inner lake shows that pellets tend to “hidden” in sediments. Suspected MPs are randomly selected for polymer detection by Micro-Raman microscopy. Polypropylene (PP), polyethylene (PE) and polyethylene terephthalate (PET) are the most common polymer types in water, sediment and atmospheric deposition MPs samples. The input of wastewater, fishery and surrounding human activities are the main sources of MPs in sediment. Atmospheric deposition has a great impact on the distribution of MPs, while the contribution of surface runoff to lake MPs is not remarkable. In addition, MPs in sediments have exceeded the environmental carrying capacity. More attention should be focused on the sediment, where huge amounts of MPs are “hidden”.

Ambient particulate air pollution is a risk factor for cardiovascular and respiratory disease, yet the biological mechanisms underlying this association are not well understood. The current study aimed to investigate the mediation role of microRNAs on the association between personal PM₂.₅ exposure and blood pressure and lung function. One hundred and twenty adults (60 truck drivers and 60 office workers) aged 18–46 years were assessed on the June 15, 2008 and at follow-up (1- to 2-weeks later). MicroRNAs were extracted from the peripheral blood samples. Compared to truck drivers, there is a significant increase in FEF₂₅₋₇₅, FEV₁, and FEV₁/FVC and a decrease in PM₂.₅ in office workers (all p < 0.05). According to the Bonferroni corrected threshold p-value < 6.81 × 10⁻⁵ (0.05/734) used, personal PM₂.₅ data showed a significant positive association with miR-644 after the adjustment for age, BMI, smoking status, and habitual alcohol use. The mediation effect of miR-644 on the association between personal PM₂.₅ exposure and FEF₂₅₋₇₅ [B (95%CI) = −1.342 (−2.810, −0.113)], PEF [B (95%CI) = -1.793 (−3.926, −0.195)], and FEV₁/FVC [B (95%CI) = −0.119‰ (−0.224‰, −0.026‰)] was significant only for truck drivers after the adjustment for covariates. There were no similar associations with blood pressure. These results demonstrate microRNAs to potentially mediate association of PM₂.₅ with lung function. Subsequent studies are needed to further elucidate the potential mechanisms of action by which the mediation effect of microRNAs is achieved with this process.

It is enlightening to determine the discrepancies and potential reasons for the degree of impact from the COVID-19 control measures on air quality as well as the associated health and economic impacts. Analysis of air quality, socio-economic factors, and meteorological data from 447 cities in 46 countries indicated that the COVID-19 control measures had significant impacts on the PM₂.₅ (particulate matter with an aerodynamic diameter less than 2.5 μm) concentrations in 20 (reduced PM₂.₅ concentrations of −7.4–29.1 μg m⁻³) of the selected 46 countries. In these 20 countries, the robustly distinguished changes in the PM₂.₅ concentrations caused by the control measures differed between the developed (95% confidence interval (CI): −2.7–5.5 μg m⁻³) and developing countries (95% CI: 8.3–23.2 μg m⁻³). As a result, the COVID-19 lockdown reduced death and hospital admissions change from the decreased PM₂.₅ concentrations by 7909 and 82,025 cases in the 12 developing countries, and by 78 and 1214 cases in the eight developed countries. The COVID-19 lockdown reduced the economic cost from the PM₂.₅ related health burden by 54.0 million dollars in the 12 developing countries and by 8.3 million dollars in the eight developed countries. The disparity was related to the different chemical compositions of PM₂.₅. In particular, the concentrations of primary PM₂.₅ (e.g., BC) in cities of developing countries were 3–45 times higher than those in developed countries, so the mass concentration of PM₂.₅ was more sensitive to the reduced local emissions in developing countries during the COVID-19 control period. The mass fractions of secondary PM₂.₅ in developed countries were generally higher than those in developing countries. As a result, these countries were more sensitive to the secondary atmospheric processing that may have been enhanced due to reduced local emissions.

In recent years, pollution of antibiotics and heavy metal has often been reported in organic wastes. Saprophytic insects have been recorded as biological control agents in organic waste management. During organic waste conversion, the intestinal bacteria of the saprophytic insects play an important role in digestion, physiology, immunity and prevention of pathogen colonization. Black soldier fly (BSF) Hermetia illucens has been widely used as saprophytic insects and showed tolerance to sulfonamides (SAs) and cadmium (Cd). Diversity and changes in gut microbiota of black soldier fly larvae (BSFL) were evaluated through 16S rRNA high-throughput sequencing, and a decrease in diversity of gut microbiota along with an increase in SAs stress was recorded. Major members identified were Actinomycetaceae, Enterobacteriaceae, and Enterococcaceae. And fourteen multi-resistance Klebsiella pneumoniae strains were isolated. Two strains BSFL7-B-5 (from middle midgut of 7-day BSFL) and BSFL11-C-1 (from posterior midgut of 11-day BSFL) were found to be low-toxic and multi-resistance. The adsorption rate of SAs in 5 mg/kg solutions by these two strains reached 65.2% and 61.6%, respectively. Adsorption rate of Cd in 20 mg/L solutions was 77.2% for BSFL7-B-5. The strain BSFL11-C-1 showed higher than 70% adsorption rates of Cd in 20, 30 and 40 mg/L solutions. This study revealed that the presence of multi-resistance bacterial strains in the gut of BSFL helped the larvae against SAs or Cd stress. After determining how and where they are used, selected BSFL gut bacterial strains might be utilized in managing SAs or Cd contamination at suitable concentrations in the future.

Antibiotic resistance is a growing problem for ecosystem health and public healthcare. Hence, the transmission of antibiotic resistance from human and animal origins to natural environments requires careful investigation. In this study, nine antibiotic resistance genes (ARGs), three mobile genetic elements (MGEs), and their relations with antibiotics, heavy metals, and microbiota were investigated in 16 sample sites (Xinxiang, China). Fluoroquinolones (0.13–14.22 μg/L) were most abundant in hospital effluent and oxytetracycline (251.86–5817.47 μg/kg) in animal manure. Animal manure showed the highest levels of zinc (80.79–2597.14 mg/kg) and copper (32.47–85.22 mg/kg), possibly affecting the prevalence of intI1 and aac(6′)-Ib genes. Aminoglycoside and sulfonamide resistance genes (aac(6’)-Ib, aadA, and sul1) were the main ARGs in this area. In addition, the detected ARGs and MGEs were higher in animal manure than in hospital effluent, except for the sul1 gene. On the other hand, the incomplete removal of antibiotics (29.76–100%), heavy metals (31.25–100%), and ARGs (1–3 orders of magnitude) in MWWTPs resulted in the accumulation of these contaminants in the receiving river. Network analysis suggested that the potential hosts (Jeotgalibaca, Atopostipes, Corynebacterium_1, etc.) of ARGs were more predominant in animal manure rather than hospital effluent, indicating a higher ARG transfer potential in animal manure compared with hospital sources. These results provide useful insights into the different migration and dissemination routes of antibiotics, heavy metals, ARGs, and microbiota from anthropogenic and animal origins to their receiving environments via MWWTP discharge and manure fertilization.

Microplastics (MPs) present in non-negligible amounts in urban environments, where urban rivers serve as important transport channels for MPs. However, the footprint of MPs in urban rivers under the influence of natural and anthropogenic factors is poorly understood. This study investigated the MPs organization, stability and pollution risk before and after rainfall in the Qing River, Beijing. Rainfall potentially diluted the MPs abundance, attributed to opening of barrages and increase of flow velocity. The proportion of small-sized MPs (SMPs, 48–300 μm) decreased slightly, whereas that of normal-sized MPs (NMPs, 300–1000 μm) and large-sized MPs (LMPs, > 1000 μm) increased. However, SMPs dominantly presented in the Qing River before and after rainfall. Polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS) were main polymers observed in the Qing River. The proportions of PET and PS decreased, while PP and PE increased after rainfall. The main types of MPs introduced by stormwater were PP and PE. The elevated MP diversity integrated index after rain suggested that rainfall enriched the sources of MPs. Rainfall reduced the stability and fragmentation of MPs owing to the introduction of large debris. NMPs and LMPs were susceptible to further fragmentation and downsizing, implying that MPs abundance in the Qing River tended to rise and SMPs might enriched. In addition, alteration of MPs fragmentation and stability reflected that the likely input source was wastewater treatment plant and atmospheric deposition before rainfall, whereas soil and road dust were possible sources after rain. The pollution risk assessment defined the MPs pollution risk of Qing River as low level and decreased after rainfall. This study demonstrated that rainfall substantially influences MPs organization in urban river and provides empirical support for MPs environmental behavior under influence of natural and anthropogenic factors.

Unplanned urbanization and heavy automobile use by the rapidly growing population contribute to a variety of environmental issues. Roadside plants can mitigate air pollution by modifying their enzymatic activity, physiological and anatomical traits. Plant enzymes, physiological and anatomical traits play an important role in adaptation and mitigation mechanisms against vehicular emissions. There is a significant gap in understanding of how plant enzymes and anatomical traits respond or how they participate in modulating the effect of vehicular emissions/air pollution. Modulation of leaf anatomical traits is also useful in regulating plant physiological behavior. Hence, the present study was conducted to evaluate the effects of vehicular pollution on the enzymatic activity, physiological, and anatomical traits of plant species that grow in forests (S1) and alongside roads (S2-1 km away from the S1 site) during different seasons. The present study examines four commonly found roadside tree species i.e. Grevillea robusta, Cassia fistula, Quercus leucotrichophora and Cornus oblonga. The study found that the activities of catalase and phenylalanine ammonium enzymes were higher in G. robusta species of roadside than control site (S1). Non-enzymatic antioxidants such as flavonoid and phenol were also found in higher concentrations in roadside tree species during the summer season. However, the measured values of physiological traits were higher in Q. leucotrichophora tree species of S1 during the summer season. When compared to the other species along the roadside, Q. leucotrichophora had the highest number of stomata and epidermal cells during the summer season. Hence, we found that tree species grown along the roadside adapted towards vehicular emissions by modulating their enzymatic, physiological, and anatomical traits to mitigate the effect of air pollution.

Biodegradable plastic mulch film (BDM) is an environmentally friendly alternative to conventional polyethylene mulch, and has been growingly used in agriculture. However, practical degradation performance of BDM, especially the widely used type of blended polylactic acid (PLA)/polybutylene adipate (PBAT) in different ratios, and microbial alteration in soil environments, remain largely unrevealed. In this study, four types of BDM blended with 40–80% PLA and 20–60% PBAT were comparatively investigated through microcosm soil incubation experiments for 105 days, and combined with conditions of different soil moisture or pH. Microbiome within film-surrounding soil were assayed using 16 S rRNA high-throughput sequencing. Results showed a trend of increasing degradation efficiency with the increase of PLA proportion, and 70% PLA and 30% PBAT group presented the highest weight loss rate, i.e., 60.16 ± 5.86%. In addition, degradation and aging of PLA/PBAT varied among different soil moisture and pH values. A moderate moisture, i.e., 60% and a neutral pH7.0 caused significantly high degradation efficiency compared to other moisture or pH conditions. Moreover, bacterial abundance and community structure in the surrounding soil were related to soil moisture and pH. PLA/PBAT incubation treatment induced a remarkable increase in abundance of degradation-related species Pseudomonas and Sphingomonas. Bacterial richness and diversity in soil correspondingly respond to ratio-different PLA/PBAT's degradation under moisture/pH-different conditions through a redundancy analysis. Altogether, these findings indicate that practical degradation of PLA/PBAT film is closely related to soil environments and bacterial community. It is significant for the application of biodegradable plastics in agriculture on the perspective of soil sustainability.

This study investigated the effects of adding biochar (BC) on the fate of ciprofloxacin (CIP) and its related antibiotic tolerance (AT) in activated sludge. Three activated sludge reactors were established with different types of BC, derived from apple, pear, and mulberry tree, respectively, and one reactor with no BC. All reactors were exposed to an environmentally relevant level of CIP that acted as a definitive selective pressure significantly promoting AT to four representative antibiotics (CIP, ampicillin, tetracycline, and polymyxin B) by up to two orders of magnitude. While CIP removal was negligible in the reactor without BC, the BC-dosed reactors effectively removed CIP (70–95% removals) through primarily adsorption by BC and biodegradation/biosorption by biomass. The AT in the BC-added reactors was suppressed by 10–99%, compared to that without BC. The BC addition played a key role in sequestering CIP, thereby decreasing the selective pressure that enabled the proactive prevention of AT increase. 16S rRNA gene sequencing analysis showed that the BC addition alleviated the CIP-mediated toxicity to community diversity and organisms related to phosphorous removal. Machine learning modeling with random forest and support vector models using AS microbiome data collectively pinpointed Achromobacter selected by CIP and strongly associated with the AT increase in activated sludge. The identification of Achromobacter as an important AT bacteria revealed by the machine learning modeling with multiple models was also validated with a linear Pearson's correlation analysis. Overall, our study highlighted Achromobacter as a potential useful sentinel for monitoring AT occurring in the environment and suggested BC as a promising additive in wastewater treatment to improve micropollutant removal, mitigate potential AT propagation, and maintain community diversity against toxic antibiotic loadings.

Biochar (BC) application to agricultural soil can impact two nitrogen (N) gases pollutants, i.e., the ammonia (NH₃) and nitrous oxide (N₂O) losses to atmospheric environment. Under rice-wheat rotation, applied at which growth cycle may influence the aforementioned effects of BC. We conducted a soil column (35 cm in inner diameter and 70 cm in height) experiment to evaluate the responses of wheat N use efficiency (NUE), NH₃ volatilization, and N₂O emission from wheat season to biochar applied at rice (R) or wheat (W) growth cycle, meanwhile regarding the effect of inorganic fertilizer N input rate, i.e., 72, 90, and 108 kg ha⁻¹ (named N72, N90, and N108, respectively). The results showed that BC application influenced the wheat growth and grain yield. In particular, BC applied at rice season increased the wheat grain yield when receiving 90 and 108 kg N ha⁻¹. The improved wheat grain yield was attributed to that N90 + BC(R) and N108 + BC(R) enhanced the wheat NUE by 53.8% and 52.8% over N90 and N108, respectively. More N input led to higher NH₃ volatilization and its emission factor. Interestingly, 19.7%–34.0% lower NH₃ vitalizations were recorded under treatments with BC applied in rice season, compared with the treatments only with fertilizer N. BC applied at rice season exerted higher efficiency on mitigating N₂O emission than that applied at wheat season under three N input rates, i.e., 60.5%–77.6% vs 29.8%–34.8%. Overall, considering the crop yield and global warming potential resulting from NH₃ volatilization and N₂O emission of wheat season, N90 + BC(R) is recommended. In conclusion, farmers should consider the application time and reduce inorganic fertilizer N rate when using BC.