Laboratory experiments were conducted to estimate the impacts of simulated acid rain (SAR) on recalcitrance in a Plinthudult and a Paleudalfs soil in south China, which were a variable and a permanent charge soil, respectively. Simulated acid rains were prepared at pH 2.0, 3.5, 5.0, and 6.0, by additions of different volumes of H₂SO₄ plus HNO₃ at a ratio of 6 to 1. The leaching period was designed to represent 5 years of local annual rainfall (1,200 mm) with a 33 % surface runoff loss. Both soils underwent both acidification stages of (1) cation exchange and (2) mineral weathering at SAR pH 2.0, whereas only cation exchange occurred above SAR pH 3.5, i.e., weathering did not commence. The cation exchange stage was more easily changed into that of mineral weathering in the Plinthudult than in the Paleudalfs soil, and there were some K⁺ and Mg²⁺ ions released on the stages of mineral weathering in the Paleudalfs soil. During the leaching, the release of exchangeable base cations followed the order Ca²⁺ > K⁺ > Mg²⁺ > Na⁺ for the Plinthudult and Ca²⁺ > Mg²⁺ > Na⁺ > K⁺ for the Paleudalfs soil. The SARs above pH 3.5 did not decrease soil pH or pH buffering capacity, while the SAR at pH 2.0 decreased soil pH and the buffering capacity significantly. We conclude that acid rain, which always has a pH from 3.5 to 5.6, only makes a small contribution to the acidification of agricultural soils of south China in the short term of 5 years. Also, Paleudalfs soils are more resistant to acid rain than Plinthudult soils. The different abilities to prevent leaching by acid rain depend upon the parent materials, types of clay minerals, and soil development degrees.

The performance and temporal variation of hybrid vertical-subsurface flow constructed wetlands (VFCWs) in response to two-stage combinations of vertical upflow (VUF) and vertical downflow (VDF) were analyzed in this research. The results of high carbon (C) treatment and high nitrogen (N) treatment were similar. The Lythrum salicaria treatment showed higher removal efficiency than CWs planted with Acorus calamus. Under high C- and N-loading treatments, the optimum two-stage combination was VDF-VUF VFCWs planted with A. calamus. Furthermore, the highest nutrient removal efficiencies were achieved in late summer (July and August) and early autumn (September). The chemical oxygen demand and total nitrogen removal efficiencies were significantly affected (P < 0.05) by season, system, and wetland plant.

The presence of Eriophorum angustifolium in mine tailings of pyrite maintains a neutral pH, despite weathering, thus lowering the release of toxic elements into acid mine drainage water. We investigated if the presence of slightly elevated levels of free toxic elements triggers the plant rhizosphere to change the pH towards neutral by increasing organic acid contents. Plants were treated with a combination of As, Pb, Cu, Cd, and Zn at different concentrations in nutrient medium and in soil in a rhizobox-like system for 48–120 h. The pH and organic acids were detected in the mucilage dissolved from root surface, reflecting the rhizospheric solution. Also the pH of root–cell apoplasm was investigated. Both apoplasmic and mucilage pH increased and the concentrations of organic acids enhanced in the mucilage with slightly elevated levels of toxic elements. When organic acids concentration was high, also the pH was high. Thus, efflux of organic acids from the roots of E. angustifolium may induce rhizosphere basification.

Cadmium (Cd) toxicity in plants leads to serious disturbances of physiological processes, such as inhibition of chlorophyll synthesis, oxidative injury to the plant cells and water and nutrient uptake. Response of Matricaria chamomilla L. to calcium chloride (CaCl₂) enrichment in growth medium for reducing Cd toxicity were studied in this study. Hydroponically cultured seedlings were treated with 0, 0.1, 1, and 5 mM CaCl₂, under 0, 120, and 180 μM CdCl₂ conditions, respectively. The study included measurements pertaining to physiological attributes such as growth parameters, Cd concentration and translocation, oxidative stress, and accumulation of phenolics. Addition of CaCl₂ to growth media decreased the Cd concentration, activity of antioxidant enzymes, and reactive oxygen species accumulation in the plants treated with different CdCl₂, but increased the growth parameters. Malondialdehyde and total phenolics in shoots and roots were not much affected when plants were treated only with different CaCl₂ levels, but it showed a rapid increase when the plants were exposed to 120 and 180 CdCl₂ levels. CaCl₂ amendment also ameliorated the CdCl₂-induced stress by reducing oxidative injury. The beneficial effects of CaCl₂ in ameliorating CdCl₂ toxicity can be attributed to the Ca-induced reduction of Cd concentration, by reducing the cell-surface negativity and competing for Cd²⁺ ion influx, activity enhancement of antioxidant enzymes, and biomass accumulation.

Nuisance cyanobacterial blooms degrade water resources through accelerated eutrophication, odor generation, and production of toxins that cause adverse effects on human health. Quick and effective methods for detecting cyanobacterial abundance in drinking water supplies are urgently needed to compliment conventional laboratory methods, which are costly and time consuming. Hyperspectral remote sensing can be an effective approach for rapid assessment of cyanobacterial blooms. Samples (n = 250) were collected from five drinking water sources in central Indiana (CIN), USA, and South Australia (SA), which experience nuisance cyanobacterial blooms. In situ hyperspectral data were used to develop models by relating spectral signal with handheld fluorescence probe (YSI 6600 XLM-SV) measured phycocyanin (PC in cell/ml), a proxy pigment unique for indicating the presence of cyanobacteria. Three-band model (TBM), which is effective for chlorophyll-a estimates, was tuned to quantify cyanobacteria coupled with the PC probe measured cyanobacteria. As a comparison, two band model proposed by Simis et al. (Limnol Oceanogr, 50(11): 237–245, 2005; denoted as SM05) was paralleled to evaluate TBM model performance. Our observation revealed a high correlation between measured and estimated PC for SA dataset (R ² = 0.96; range: 534–20,200 cell/ml) and CIN dataset (R ² = 0.88; range: 1,300–44,500 cell/ml). The potential of this modeling approach for imagery data were assessed by simulated ESA/Centinel3/OLCI spectra, which also resulted in satisfactory performance with the TBM for both SA dataset (RMSE % = 26.12) and CIN dataset (RMSE % = 34.49). Close relationship between probe-measured PC and laboratory measured cyanobacteria biovolume was observed (R ² = 0.93, p < 0.0001) for the CIN dataset, indicating a stable performance for PC probe. Based on our observation, field spectroscopic measurement coupled with PC probe measurements can provide quantitative cyanobacterial bloom information from both relatively static and flowing inland waters. Hence, it has promising implications for water resource managers to obtain information for early warning detection of cyanobacterial blooms through the close association between probe measured PC values and cyanobacterial biovolume via remote sensing modeling.

We evaluated 41 rural workers occupationally exposed to pesticides and 32 subjects as a control group, using the micronucleus (MN) and the comet assay. For the comet assay, we evaluated the peripheral blood, and for the MN, we sampled cells from the oral epithelium. Damage to DNA was measured by tail length, % DNA in tail (% tail), olive tail moment (OTM), and tail moment (TM). The exposed group presented an 8× increase in MN frequency, when compared to the control group (p <0.05). When we contrasted the MN frequencies between the individuals that use and do not use personal protective equipment, we found a mean of 7.5 MN (57 % variance) and 12.1 MN (130 % variance), respectively. The binucleated cells were 0.04 and 0.005, in the exposed and control groups, respectively, indicating 8× increase in the number of binucleated cells, when comparing the groups (p <0.05). In the comet assay, we demonstrated statistically significant differences in three parameters (% DNA, OTM, and TM) indicating that the rural workers presented high levels of genomic damages. Our results indicate that occupational exposure to pesticides could cause genome damage in somatic cells, representing a potential health risk to Brazilian rural workers that deal constantly with agrochemicals without adequate personal protection equipment.

Several industries are using dyes as coloring agents. The effluents from these industries are increasingly becoming an environmental problem. The removal of dyes from aqueous solution has a great potential in the field of environmental engineering. This paper reviews the classification, characteristics, and problems of dyes in detail. Advantages and disadvantages of different methods used for dye removal are also analyzed. Among these methods, Fenton process-based advanced oxidation processes are an emerging prospect in the field of dye removal. Fenton processes have been classified and represented as “Fenton circle”. This paper analyzes the recent studies on Fenton processes. The studies include analyzing different configurations of reactors used for dye removal, its efficiency, and the effects of various operating parameters such as pH, catalyst concentration, H₂O₂ concentration, initial dye concentration, and temperature of Fenton processes. From the present study, it can be conclude that Fenton processes are very effective and environmentally friendly methods for dye removal.

The effective disposal of redundant elephant dung (ED) is important for environmental protection and utilization of resource. The aim of this study was to remove a toxic-azo dye, Reactive Red (RR) 120, using this relatively cheap material as a new adsorbent. The FTIR-ATR spectra of ED powders before and after the sorption of RR 120 and zero point charge (pHzpc) of ED were determined. The sorption capacity of ED for removing of RR 120 were carried out as functions of particle size, adsorbent dose, pH, temperature, ionic strength, initial dye concentration, and contact time. Sorption isotherm, kinetic, activation energy, thermodynamic, and desorption parameters of RR 120 on ED were studied. The sorption process was found to be dependent on particle size, adsorbent dose, pH, temperature, ionic strength, initial dye concentration, and contact time. FTIR-ATR spectroscopy indicated that amine and amide groups have significant role on the sorption of RR 120 on ED. The pHzpc of ED was found to be 7.3. Sorption kinetic of RR 120 on ED was well described by sigmoidal Logistic model. The Langmuir isotherm was well fitted to the equilibrium data. The maximum sorption capacity was 95.71 mg g(-1). The sorption of RR 120 on ED was mainly physical and exothermic according to results of D-R isotherm, Arrhenius equation, thermodynamic, and desorption studies. The thermodynamic parameters showed that this process was feasible and spontaneous. This study showed that ED as a low-cost adsorbent had a great potential for the removal of RR 120 as an alternative eco-friendly process.

Nitrogen removal processing in different constructed wetlands treating different kinds of wastewater often varies, and the contribution to nitrogen removal by various pathways remains unclear. In this study, the seasonal nitrogen removal and transformations as well as nitrogen balance in wetland microcosms treating slightly polluted river water was investigated. The results showed that the average total nitrogen removal rates varied in different seasons. According to the mass balance approach, plant uptake removed 8.4–34.3 % of the total nitrogen input, while sediment storage and N₂O emission contributed 20.5–34.4 % and 0.6–1.9 % of nitrogen removal, respectively. However, the percentage of other nitrogen loss such as N₂ emission due to nitrification and denitrification was estimated to be 2.0–23.5 %. The results indicated that plant uptake and sediment storage were the key factors limiting nitrogen removal besides microbial processes in surface constructed wetland for treating slightly polluted river water.

We performed detrended correspondence analysis (DCA) ordination to compare seven successional seres running in stone quarries, coal mining spoil heaps, sand and gravel pits, and extracted peatlands in the Czech Republic in central Europe. In total, we obtained 1,187 vegetation samples containing 705 species. These represent various successional stages aged from 1 to 100 years. The successional seres studied were more similar in their species composition in the initial stages, in which synathropic species prevailed, than in later successional stages. This vegetation differentiation was determined especially by local moisture conditions. In most cases, succession led to a woodland, which usually established after approximately 20 years. In very dry or wet places, by contrast, where woody species were limited, often highly valuable, open vegetation developed. Except in the peatlands, the total number of species and the number of target species increased during succession. Participation of invasive aliens was mostly unimportant. Spontaneous vegetation succession generally appears to be an ecologically suitable and cheap way of ecosystem restoration of heavily disturbed sites. It should, therefore, be preferred over technical reclamation.