The phenomenon of mass occurrence of the lichen Cladonia rei in extremely contaminated post-smelting slag dumps was studied in relation to metal accumulation capacity of this lichen. The research was aimed to evaluate the relationships between element contents in the thalli and in the corresponding substrate. The study was conducted in terms of a wide spectrum of Zn, Cd, Pb and As contents. The concentrations of these elements in the lichen thalli and substrate samples were measured. Various regression models were considered to find the best fitted one that greatly reflects the dependencies. Various Cladonia species and the hyperaccumulator Diploschistes muscorum were also included in the study for comparison purposes. Specific non-linear regression models described by a power function reflected relationships between Zn and Cd contents in C. rei thalli and in the host substrate in the most reliable way. The relationship for As was also noted, but none significant model was found. Contrarily, Pb concentrations in the thalli varied independently of the metal levels in the substrate. Nevertheless, the concentrations of all measured heavy metals in C. rei thalli are relatively low considering the frequently enormous substrate contamination. Different Cladonia species demonstrated a generally similar accumulation capacity and could be considered as weak accumulators. The restrained accumulation pattern may be one of the important attributes of C. rei which facilitates its colonisation of extremely contaminated dumps. This finding highlights ecological importance of this species as stable and resistant pioneer in such affected sites.

The sustainable management of chemicals and their associated wastes—especially legacy stockpiles—is always challenging. Developing countries face particular difficulties as they often have insufficient treatment and disposal capacity, have limited resources and many lack an appropriate and effective regulatory framework. This paper describes the objectives and the approach of the Egyptian–German Twinning Project under the European Neighbourhood Policy to improve the strategy of managing hazardous substances in the Egyptian Environmental Affairs Agency (EEAA) between November 2008 and May 2011. It also provides an introduction to the Republic of Egypt’s legal and administrative system regarding chemical controls. Subsequently, options for a new chemical management strategy consistent with the recommendations of the United Nations Chemicals Conventions are proposed. The Egyptian legal and administrative system is discussed in relation to the United Nations’ recommendations and current European Union legislation for the sound management of chemicals. We also discuss a strategy for the EEAA to use the existing Egyptian legal system to implement the United Nations’ Globally Harmonized System of Classification and Labelling of Chemicals, the Stockholm Convention and other proposed regulatory frameworks. The analysis, the results, and the recommendations presented may be useful for other developing countries in a comparable position to Egypt aspiring to update their legislation and administration to the international standards of sound management of chemicals.

In this study, a natural adsorbent (activated dry flowers (ADF)) was prepared from plant-derived waste biomass by chemical activation and employed for chromium (VI) removal from aqueous medium using experimental batch technique. Experiments were carried out as function of adsorbent dosage, pH, and contact time. The maximum chromium (VI) removal was observed at initial pH 3 (~94% removal). The equilibrium data was fitted well to Langmuir isotherm. The adsorption capacity of ADF was found to be 4.40 (mg chromium (VI)/g) which was comparable to the adsorption capacity of some other adsorbents documented. Among various kinetic models applied, pseudo second-order model was found to explain the kinetics of chromium (VI) adsorption most effectively (R2>0.99). Thermodynamic parameters such as ΔG, ΔS, and ΔH shows that adsorption process was spontaneous and endothermic at all the concentration ranges studied. Desorption of chromium (VI) with 2 N NaOH was effective (~71%) and, hence, there exists the possibility of recycling the ADF. The major advantages of using ADF as an adsorbent are due to its effectiveness in reducing the concentration of chromium (VI) to very low levels. It requires little processing and is reversible as well as eco-friendly in contrast to traditional methods.

In 2009, hexachlorocyclohexane (HCH) isomers (α-HCH, β-HCH, and γ-HCH [lindane]) were listed as persistent organic pollutants (POP) in the Stockholm Convention. Accordingly, the legacy of HCH/lindane production with the associated large HCH waste deposits has become recognized as an issue of global concern and is addressed in the implementation of the Convention. The current paper gives an overview of the major contaminated sites from lindane production of the INQUINOSA Company. This company operated from 1975 to 1988 in the city of Sabiñánigo, Spain. HCH production resulted in the production of approximately 115,000 tonnes of waste isomers which were mainly dumped in two unlined landfills. These two landfill sites, together with the former production site, are recognized sources of environmental pollution. Assessment and remediation activities at these sites are described. A dense nonaqueous phase liquid (DNAPL) contaminated inter alia with HCH isomers, benzene, chlorobenzenes, and chlorophenols as the main contaminants and an associated contaminated groundwater plume have been discovered at both landfill/dumpsites and at the former production site. The approximately 4,000 t of DNAPLs constitute a serious risk for the environment due to the proximity of the Gállego River. Since 2004, more than 20 tonnes of this DNAPL has been extracted using “pump and treat” techniques. The Aragon Regional Government and the Spanish Environmental Ministry are taking action, focusing on the treatment of DNAPL and on the transfer of the large quantities of solid POP wastes to a new landfill. A range of laboratory tests has been performed in order to plan the aquifer remediation.

Phosphogypsum (PG) is a by-product of the phosphorus–fertiliser industry and represents an environmental concern since it contains pollutants such as cadmium (Cd). We have recently shown that the overexpression of a proton pump gene (TaVP1) in transgenic tobacco (Nicotiana tabacum) led to an enhanced Cd tolerance and accumulation. The aim of this study was to evaluate the potential of transgenic Arabidopsis thaliana plants harbouring the TaVP1 gene to phytoremediate phosphogypsum. A pot experiment was carried out under greenhouse conditions. Transgenic A. thaliana plants harbouring the TaVP1 gene were grown on various substrates containing phosphogypsum (0, 25, 50 and 100 %) for 40 days. At the end of the growth period, we examined the growth (germination, root length, fresh weight) and physiological parameters (chlorophyll and protein contents, catalase activity and proteolysis) as well as the cadmium, Mg, Ca, and P contents of the A. thaliana plants. In order to evaluate Cd tolerance of the A. thaliana lines harbouring the TaVP1 gene, an in vitro experiment was also carried out. One week-old seedlings were transferred to Murashige and Skoog agar plates containing various concentrations of cadmium; the germination, total leaf area and root length were determined. The growth and physiological parameters of all A. thaliana plants were significantly altered by PG. The germination capacity, root growth and biomass production of wild-type (WT) plants were more severely inhibited by PG compared with the TaVP1 transgenic A. thaliana lines. In addition, TaVP1 transgenic A. thaliana plants maintained a higher antioxidant capacity than the WT. Interestingly, elemental analysis of leaf material derived from plants grown on PG revealed that the transgenic A. thaliana line accumulated up to ten times more Cd than WT. Despite its higher Cd content, the transgenic A. thaliana line performed better than the WT counterpart. In vitro evaluation of Cd tolerance showed that TaVP1 transgenic A. thaliana lines were more Cd-tolerant than the WT plants. These results suggested that ectopic expression of a vacuolar proton pump in A. thaliana plants can lead to various biotechnological applications including the phytoremediation of industrial wastes.

Perfluorooctane sulfonate (PFOS) and PFOS-related substances have been listed as persistent organic pollutants in the Stockholm Convention. From August 2012, Parties to the Convention needed to address the use, storage, and disposal of PFOS—including production sites and sites where PFOS wastes have been deposited—in their national implementation plans. The paper describes the pollution in Minnesota (USA) caused by the 3M Company at one of the largest per/polyfluorinated chemical (PFC) production facilities. From early 1950s until the end of 2002, when 3M terminated PFOS and perfluorooctanoic acid (PFOA) production, PFOS, PFOA, and other PFC production wastes were disposed around the plant and in local disposal sites. Discharges from the site and releases from deposits caused widespread contamination of ground and surface waters including local drinking water wells. Fish in the river downstream were contaminated with PFOS to levels that led to fish consumption advisories. Human exposures resulted from ingesting contaminated drinking water, requiring installation of water treatment facilities and alternate water supplies. The critical evaluation of the assessments done revealed a range of gaps in particular of human exposure where relevant exposure pathways including the entire exposure via food have not been taken into consideration. Currently, the exposure assessment of vulnerable groups such as children or Hmong minorities is inadequate and needs to be improved/validated by epidemiological studies. The assessment methodology described for this site may serve—with highlighted improvements—as a model for assessment of other PFOS/PFC production sites in the Stockholm Convention implementation.

In the last decade, various molecular methods (e.g., fluorescent hybridization assay, sandwich hybridization assay, automatized biosensor detection, real-time PCR assay) have been developed and implemented for accurate and specific identification and estimation of marine toxic microalgal species. This review focuses on the recent quantitative real-time PCR (qrt-PCR) technology developed for the control and monitoring of the most important taxonomic phytoplankton groups producing biotoxins with relevant negative impact on human health, the marine environment, and related economic activities. The high specificity and sensitivity of the qrt-PCR methods determined by the adequate choice of the genomic target gene, nucleic acid purification protocol, quantification through the standard curve, and type of chemical detection method make them highly efficient and therefore applicable to harmful algal bloom phenomena. Recent development of qrt-PCR-based assays using the target gene of toxins, such as saxitoxin compounds, has allowed more precise quantification of toxigenic species (i.e., Alexandrium catenella) abundance. These studies focus only on toxin-producing species in the marine environment. Therefore, qrt-PCR technology seems to offer the advantages of understanding the ecology of harmful algal bloom species and facilitating the management of their outbreaks.

A new polyclonal antibody (pAb) was prepared and used for the determination of polychlorinated biphenyls (PCBs) in air samples to promote the application of immunoassay technology in the determination of PCBs. Three PCB congeners immunogen mixture was used to stimulate immune responses in rabbits. The specific pAb to PCBs was obtained and used to develop an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA). A standard curve for Aroclor 1248 was prepared using concentrations ranging from 0.1 to 100 μg L⁻¹. The average IC₅₀ value was 16.21 μg L⁻¹ and the limit of detection at 10 % inhibition (IC₉₀) was 0.069 μg L⁻¹. The entire procedure was then evaluated using spiked air samples. The recoveries of Aroclor 1248 at various spiking levels in the air samples ranged from 84 to 113 %, with relative standard deviations of 3 to 6 %. Under optimum conditions, the cross-reactivity profiles of the assays were obtained using three selected congeners, four Aroclor products, and other structurally related compounds of PCBs. The assays were found to be highly specific for PCB congeners and Aroclors 1248 and 1242. The air samples were then analyzed using gas chromatography coupled with high-resolution mass spectrometry to confirm the ic-ELISA results. The attained results demonstrated that the proposed method was an effective and inexpensive technique for the PCBs determination in air samples.

The adsorption of 12 pesticides of the phenylurea family was studied by batch experiments in order to determine the adsorption coefficient, K d. The study was conducted in two soils chosen for their differences in organic matter and calcite contents. K d pesticide adsorption coefficients were higher for soil S1 than for soil S2 due to the presence of a higher organic matter content and a lower calcite content in soil S1. To identify pesticide properties governing retention, 18 molecular descriptors were considered. Class-specific quantitative structure–property relationship (QSPR) soil sorption models using one, two, and three descriptors were developed from our experimental data using linear regressions. One of the aims of this work was to check whether QSPR models that did not include literature values of K ₒw were able to predict K d coefficients in satisfactory agreement with our experimental data. The influence of the level of theory in determining K ₒw and polarisability predictors on the predictive performance of the model was also examined by comparing quantum chemistry and empirical (QikProp) approaches. The one-descriptor model using “quantum” polarisability α was found to perform almost as well as or better than the other models.

This study quantified Cd, Pb, and Cu content, and the soil–plant transfer factors of these elements in rice paddies within Cam Pha, Quang Ninh province, northeastern Vietnam. The rice paddies are located at a distance of 2 km from the large Coc Sau open-pit coal mine. Electron microprobe analysis combined with backscattered electron imaging and energy-dispersive spectroscopy revealed a relatively high proportion of carbon particles rimmed by an iron sulfide mineral (probably pyrite) in the quartz–clay matrix of rice paddy soils at 20–30 cm depth. Bulk chemical analysis of these soils revealed the presence of Cd, Cu, and Pb at concentrations of 0.146 ± 0.004, 23.3 ± 0.1, and 23.5 ± 0.1 mg/kg which exceeded calculated background concentrations of 0.006 ± 0.004, 1.9 ± 0.5, and 2.4 ± 1.5 mg/kg respectively at one of the sites. Metals and metalloids in Cam Pha rice paddy soils, including As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, and Zn, were found in concentrations ranging from 0.2 ± 0.1 to 140 ± 3 mg/kg, which were in close agreement with toxic metal contents in mine tailings and Coc Sau coal samples, suggesting mining operations as a major cause of paddy soil contamination. Native and model Oryza sativa L. rice plants were grown in the laboratory in a growth medium to which up to 1.5 mg/kg of paddy soil from Cam Pha was added to investigate the effects on plant growth. A decrease in growth by up to 60 % with respect to a control sample was found for model plants, whereas a decrease of only 10 % was observed for native (Nep cai hoa vang variety) rice plants. This result suggests an adaptation of native Cam Pha rice plants to toxic metals in the agricultural lands. The Cd, Cu, and Pb contents of the native rice plants from Cam Pha paddies exceeded permitted levels in foods. Cadmium and Pb were highest in the rice plant roots with concentrations of 0.84 ± 0.02 and 7.7 ± 0.3 mg/kg, suggesting an intake of these metals into the rice plant as shown, for example, by Cd and Pb concentrations of 0.09 ± 0.01 and 0.10 ± 0.04 mg/kg respectively in the rice grain endosperm. The adaptation of native rice plants, combined with bioaccumulation ratios of 1 ± 0.6 to 1.4 ± 0.7 calculated for Cd transfer to the rice grain endosperm, and maximum Cd transfer factors of 4.3 ± 2.1 to the plant roots, strongly suggest a continuous input of some toxic metals from coal-mining operations to agricultural lands in the region of Cam Pha. In addition, our results imply a sustained absorption of metals by native rice plant varieties, which may lead to metal accumulation (e.g., Cd) in human organs and in turn to severe disease.