Di-isopropylnaphthalene (DIPN) has highly persistent and bioaccumulative properties, and a large amount of DIPN is used as a PCB substitute in Japan. However, DIPN in the environment has not been thoroughly investigated. In addition, mono-isopropylnaphthalene (MIPN) and tri-isopropylnaphthalene (TIPN), which are the homologues of DIPN, have similar properties to DIPN. In this study, simultaneous analytical methods for MIPN, DIPN, and TIPN for air, environmental water, sediment, and biological samples were developed, and the resultant contamination caused by each in the environment was investigated. DIPN was detected at 1.1 ± 0.38 ng/m3 in air and between < 1.9 and 9.8 ng/L in river water, but MIPN and TIPN were not. In Lateolabrax japonicas (Japanese sea perch), TIPN was detected from only females at between 0.65 and 1.4 ng/g-wet. DIPN was detected from all perches at between 1.2 and 3.4 ng/g-wet. DIPN and TIPN isomer fingerprints in females were different from those in the reference standard stock solution ones. In sediments, MIPN, DIPN, and TIPN were detected at between < 0.16 and 8.6 ng/g-dry, between < 1.1 and 4400 ng/g-dry, and between < 0.83 and 500 ng/g-dry, respectively. The contamination trend of DIPN in the sediments was similar to that of PCBs.

BACKGROUND, AIM AND SCOPE: There is growing evidence to show that dissolved humic substances, HSs, can directly interact with freshwater organisms, such as phototrophic organisms, cladocerans, amphipods and fish. The responses are—at least in part—transcriptionally controlled. These interactions can lead to stress symptoms in the exposed organisms. In phototrophs, stress symptoms include a reduction in photosynthetic oxygen release and antioxidative stress. Besides the direct effects, HSs also cause indirect effects that provoke different physiological adaptations in the phototrophs. MATERIALS AND METHODS: The HS-influenced photosynthetic performance and stress response of two different green algae, Pseudokirchneriella subcapitata (Koršikov) Hindák and Monoraphidium braunii (Nägeli in Kützing) Komárková-Legnerová, and two cyanobacterial species, Synechocystis sp. (PCC 6803, Institut Pasteur) and Microcystis aeruginosa (PCC 7806, Institut Pasteur), were tested. Two humic preparations were applied, the synthetic HS1500 and HuminFeed®, HF, which had previously been proven effective in bioassays with invertebrates and a water mould. RESULTS AND DISCUSSION: When the algae were grown near light saturation, most of the tested species were positively affected by HSs in growth rate or chlorophyll content. Cell sizes decreased with increasing HS concentrations for all eukaryotic phototrophs, except for the cyanobacteria. After 4 to 5 days of cultivation at the highest HS exposure, there was a decrease in total dry weight due to reduced cell sizes in contrast to an increase in cell numbers. With the exception of Synechocystis, the dry weight per cell ratio decreased with increasing HS concentration. The efficiency of utilizing absorbed light quanta increased with increasing HS concentrations; the maximum quantum yield of photosystem II (ΦPSIImax) was higher in all of the tested species, with the exception of M. aeruginosa, after exposure to HS. CONCLUSION: The applied humic preparations did not interact directly with PSII, but changed the physiological state of the algae, especially the photosynthetic performance. Neither the green algae nor the cyanobacteria were inhibited in growth or negatively affected in their photosynthetic performance. The exposure to lower concentrations of HS stimulated better growth of the phototrophs. The tested humic preparations obviously did not have the potency to act as xenobiotic stressors; furthermore, there was no sign of herbicide potency.

BACKGROUND: This study investigated the acute effect of benzo[a]anthracene, a significant compound among polycyclic aromatic hydrocarbons, on the biodegradation of a synthetic organic substrate—a peptone/meat extract mixture—under aerobic conditions. METHODS: A laboratory-scale sequencing batch reactor was sustained at steady state at a sludge age of 10 days with substrate feeding. Inhibition tests involved running a series of batch reactors initially seeded with the biomass obtained from the parent reactor. After the biomass seeding, the reactors were started with the peptone mixture and a range of initial benzo[a]anthracene concentrations between 0.5 and 88 mg/L. Experimental profiles of oxygen uptake rates and polyhydroxyalkanoates were evaluated by calibration of a selected model. RESULTS: Lower doses of benzo[a]anthracene had no effect on process kinetics. The noticeable acute impact was only observed with the addition of 88 mg/L of benzo[a]anthracene, but it was limited with the storage mechanism: the amount of organic substrate diverted to polyhydroxyalkanoates was significantly reduced with a corresponding decrease in the maximum storage rate, k STO, from 2.7 down to 0.6 day−1. Similarly, the maximum growth rate from internally stored polyhydroxyalkanoates was lowered from 2.3 to 1.0 day−1. CONCLUSION: Among the mechanisms for direct substrate utilization, only the hydrolysis rate was slightly reduced, but otherwise, the overall COD removal efficiency was not affected.

PURPOSE: The major aromatic constituents of petroleum products viz. benzene, toluene, and mixture of xylenes (BTX) are responsible for environmental pollution and inflict serious public concern. Therefore, BTX biodegradation potential of individual as well as formulated bacterial consortium was evaluated. This study highlighted the role of hydrogen peroxide (H2O2), nitrate, and phosphate in stimulating the biodegradation of BTX compounds under hypoxic condition. MATERIALS AND METHODS: The individual bacterium viz. Bacillus subtilis DM-04 and Pseudomonas aeruginosa M and NM strains and a consortium comprising of the above bacteria were inoculated to BTX-containing liquid medium and in soil. The bioremediation experiment was carried out for 120 h in BTX-containing liquid culture and for 90 days in BTX-contaminated soil. The kinetics of BTX degradation either in presence or absence of H2O2, nitrate, and phosphate was analyzed using biochemical and gas chromatographic (GC) technique. RESULTS: Bacterial consortium was found to be superior in degrading BTX either in soil or in liquid medium as compared to degradation of same compounds by individual strains of the consortium. The rate of BTX biodegradation was further enhanced when the liquid medium/soil was exogenously supplemented with 0.01 % (v/v) H2O2, phosphate, and nitrate. The GC analysis of BTX biodegradation (90 days post-inoculation) in soil by bacterial consortium confirmed the preferential degradation of benzene compared to m-xylene and toluene. CONCLUSIONS: It may be concluded that the bacterial consortium in the present study can degrade BTX compounds at a significantly higher rate as compared to the degradation of the same compounds by individual members of the consortium. Further, addition of H2O2 in the culture medium as an additional source of oxygen, and nitrate and phosphate as an alternative electron acceptor and macronutrient, respectively, significantly enhanced the rate of BTX biodegradation under oxygen-limited condition.

Bioaugmentation for the removal of polyaromatic hydrocarbons (PAHs) from wastewater using bacteria and yeasts is considered environment-friendly and a cost-effective technique. The effectiveness of this biodegradation system depends on the stability of inoculated microorganisms and the availability of nutrients. This study is aimed to investigate the removal of high molecular weight (HMW)-PAHs from biologically treated produced water using different biological systems. Three systems, inoculated with activated sludge (AS), the mixture of five yeast strains (MY), and the mixture of AS and the five yeast strains (SY), respectively, were constructed, and their performance for the removal of HMW-PAHs was compared over 10 weeks. The effluent of the biologically treated produced water from an oilfield was used as the influent after chrysene and benzo(a)pyrene were spiked as HMW-PAHs. Polymerase chain reaction-based denaturing gradient gel electrophoresis (PCR-DGGE) and fluorescent in situ hybridization (FISH) techniques were used to examine the changes in the structures and abundances of the bacterial and yeast communities in these three systems. Only SY and MY systems were capable to remove chrysene (90.7 % and 98.5 %, respectively) and benzo(a)pyrene (80.7 % and 95.2 %, respectively). PCR-DGGE analysis confirmed that all of the five yeast strains inoculated remained in the SY and MY systems, while FISH results showed that the relative abundance of yeast in the SY and MY systems (10.6 % to 21.9 %, respectively) were significantly higher than AS system (2.3 % to 7.8 %, respectively). The relative abundances of the catechol 2,3-dioxygenase (C23O) indicated that the copy number ratios of benzene ring cleavage gene C23O in the yeast amended systems were much higher than that in the AS system. In this study, all of the three systems were effective in removing the low molecular weight (LMW)-PAHs, while HMW-PAHs including chrysene and benzo(a)pyrene were efficiently removed by MY and SY systems, not by AS system. The high HMW-PAHs removal in the MY and SY bioaugmentation systems possibly attributed to the inoculation of the mixed yeast culture. By combining the PCR-DGGE results with the FISH analyses, it was found that yeast probably consisting mainly of the five inoculated strains inhabited in the two bioaugmentation systems as a dominant population. The relatively higher performance of the SY system might be attributed to the suspended growth type which permitted a more efficient contact between microbial cells and contaminants. The bioaugmentation systems (SY and MY) were successfully established by inoculating with five nonindigenous yeast strains and demonstrated high performance in removal of HMW-PAHs.

BACKGROUND, AIM AND SCOPE: Due to their ecological niche and insectivore nature, lizards are of increased risk of exposure to pesticides in agricultural areas. In addition to their potential direct effects on non-target species, insecticides can also result in indirect impacts on lizard population by reducing their food source. Carbaryl is a common insecticide that is widely used in areas of Turkey that are home to a variety of reptiles. However, to date, little is known about the potential effects of the exposure of reptiles such as lizards or snakes to this pesticide. The aim of the study was to investigate toxic effects of carbaryl on the testes of snake-eyed lizard, Ophisops elegans that is common to regions in Turkey where Carbaryl is applied and that it can be easily cultured in the laboratory. MATERIAL AND METHODS: Adult male lizards were exposed to carbaryl once by oral gavage in concentrations of 2.5, 25 and 250 μg/g. After 96 h, lizards were euthanized and dissected. Histopathological changes were detected by randomly counting 100 tubules in each lizard. Seminiferous tubules were categorized as normal, sloughing and disorganized tubules. Diameters of tubules were also measured. The differences in histopathological changes and tubule diameters were compared for statistical significance by one-way ANOVA, using SPSS 16.0. RESULTS AND DISCUSSION: Histopathological changes were more prominent in medium- (25 μg/g) and high-dose (250 μg/g) groups than in the low-dose (2.5 μg/g) group. In the medium-dose group, the hexagonal appearance of most tubules disappeared, and they took on an oval shape. Sloughing was the characteristic tubule appearance of the medium group. In the high-dose group, significant increases in the number of disorganized tubules and prominence of haemorrhages was observed. CONCLUSION: Carbaryl caused histopathological defects on the testes of O. elegans, so it is clear that carbaryl affects male fertility in O. elegans.

OBJECTIVE: Due to its high elevation, rare human activities and proximity to south Asia where industries are highly developed, it is required to investigate the fragile environment of the Tibetan Plateau. We are aiming to obtain the concentration level, source, spatial distribution, temporal variation and potential environmental risk of Tibetan soils. METHODS: A total of 128 surf ace soil samples were collected and analyzed f or V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb, and an additional 111 samples were analyzed f or Hg and total organic carbon. Concentration comparisons coupled with multivariate statistics were used to analysis the sources of elements of soils. We also carried out Risk assessment on the soils. RESULTS: Concentrations of Hg, Cr, Ni, Cd and Pb are slightly higher than those of the late 1970s. Concentrations of Cr and Ni are higher than averaged world background values. Tibetan soils present a high natural As concentration level. DISCUSSION: Anthropogenic sources may partly contribute to the elevated Hg, Cd and Pb concentrations. Cr and Ni are mainly originated from soil parent materials. Soil elements in Anduo and Qamdo regions may threaten the health of local people. CONCLUSION: Heavy metal elements of Tibetan Plateau are mainly from the natural source. Arsenic present a high background level. Soil elements in Anduo and Qamdo regions may threaten the health of local people, which should be of concern to scientists and the government.