Due to its high growth rate and biomass production, bamboo has recently been proven to be useful in wastewater treatment. Bamboo accumulates high silicon (Si) levels in its tissues, which may improve its development and tolerance to metal toxicity. This study investigates the effect of Si supplementation on bamboo growth and copper (Cu) sensitivity. An 8-month hydroponic culture of bamboo Gigantocloa sp. "Malay Dwarf " was performed. The bamboo plants were first submitted to a range of Si supplementation (0-1.5 mM). After 6 months, a potentially toxic Cu concentration of 1.5 μM Cu(2+) was added. Contrary to many studies on other plants, bamboo growth did not depend on Si levels even though it absorbed Si up to 218 mg g(-1) in leaves. The absorption of Cu by bamboo plants was not altered by the Si supplementation; Cu accumulated mainly in roots (131 mg kg(-1)), but was also found in leaves (16.6 mg kg(-1)) and stems (9.8 mg kg(-1)). Copper addition did not induce any toxicity symptoms. The different Cu and Si absorption mechanisms may partially explain why Si did not influence Cu repartition and concentration in bamboo. Given the high biomass and its absorption capacity, bamboo could potentially tolerate and accumulate high Cu concentrations making this plant useful for wastewater treatment.

A combined treatment of electrocoagulation and ultrasound was proposed to solve some problems which exist in the phosphorus removal processes in fine chemical industry. The intermittently discharged wastewater has the features of high initial phosphorus concentration and wide initial pH variation. The electrocoagulation-ultrasound effective performance for the removal of phosphorus was investigated. The results obtained from synthetic wastewater showed that the total phosphorus (TP) decreased from 86 to about 0.4 mg/L, and the removal efficiency reached about 99.6 %, when ultrasound was applied to the electrocoagulation cell under the optimum working conditions in 10 min. Comparatively, the TP removal efficiency of electrocoagulation group was 81.3 % and the ultrasound group has almost no change. Therefore, we can conclude that the electrocoagulation and ultrasound synergistic effect can effectively degrade high-phosphorus wastewater. We have discussed the impact of various parameters on the electrocoagulation-ultrasound based on the phosphorus removal efficiency. The results obtained from synthetic wastewater showed that the optimum working pH was found to be 6, allowing the effluent to be met the emission standards without pH adjustment. An increased current enhanced the speed of treatment significance, but higher current (>40 mA/cm(2)) enhanced ultrasonic cavitation effect causing flocculation ineffective. In addition, it was found that the optimum ultrasonic power was 4 W/cm(2) and the frequency was 20 kHz. The best ultrasound intervention and ultrasonic irradiation time were processed with electrocoagulation simultaneously. The results indicated that the electrocoagulation-ultrasound could be utilized as an attractive technique for removal of phosphate in the real wastewater.

The presence of cyanotoxins, mainly microcystins (MCs), in surface freshwater represents a serious health risk to aquatic organisms living in the water body, as well as terrestrial animals and plants that are in contact with contaminated water. Consequently, the use of MCs contaminated water for irrigation represents a hazard for cultivated plants and could induce severe economical losses due to crops' yield reduction. The experimental approach undertaken in this work was exposing Vicia faba seedlings (inoculated with a Rhizobium strain resistant to MCs), to water supplemented with cyanobacterial crude extract containing total microcystins at a concentration of 50 and 100 μg/L (environmental relevant concentrations of MCs dissolved in the raw irrigation water from Lalla Takerkoust Lake-Marrakesh region). After chronic MCs exposure (2 months), biological and physiological parameters (plant growth, nitrogen uptake, mineral assimilation, and oxidative defense mechanisms) were evaluated. The results obtained showed evidence that chronic exposure to cyanobacterial bloom extract containing MCs strongly affected the physiological and biological plants activities; reduction of dry matter, photosynthetic activity, nodule number, and nitrogen assimilation. At the same time, an increase of oxidative stress was observed, as deduced from a significant increase of the activities of peroxidase, catalase, polyphenoloxidase, and phenylalanine ammonia lyase in leaves, roots, and nodules of faba bean plants exposed to cyanotoxins, especially at 100 μg/L of MCs. This experimentation constitutes a simulation of the situation related to cyanotoxins chronic exposure of seedlings-plants via the contaminated irrigation water. For this reason, once should take into consideration the possibility of contamination of agricultural crops and the quality of irrigation water should be by the way monitored for cyanotoxins biohazard.

Information on the relationship between black carbon (BC) and particle number levels in urban areas is limited. Therefore, investigating the relationship between BC and particle number levels in different particle size ranges at an urban area is worthwhile. This study used an aethalometer and scanning mobility particle sizer to measure the levels of BC and particle number simultaneously at an urban roadside in Taipei City. Measurement results show that hourly BC levels are 0.62–8.80 μg m⁻³ (mean = 3.50 μg m⁻³) and hourly particle number levels are 4.21 × 10³–4.64 × 10⁴ particles cm⁻³ (mean = 2.00 × 10⁴ particles cm⁻³) in Taipei urban area. The BC and particle number levels peak during morning (7:00–9:00) and evening (16:00–18:00) rush hours on weekdays. Low BC and particle number levels exist in the early morning hours. Time variations in BC levels are the same as those of particle number levels in this study, clearly indicating that BC and particles are likely released from the same emission source. Additionally, BC levels in the urban area are more strongly associated with ultrafine particle levels than with total particle number levels, particularly in the size range of 56–180 nm. According to measurement results, most BC in aerosols in urban areas can be in the ultrafine size range.

Health effects of ambient air pollution were studied in three groups of schoolchildren living in areas (suburban, urban and urban-traffic) with different air pollution levels in Eskişehir, Turkey. This study involved 1,880 students aged between 9 and 13 years from 16 public primary schools. This two-season study was conducted from January 2008 through March 2009. Symptoms of asthma, rhinitis and eczema were determined by the International Study of Asthma and Allergies in Childhood questionnaire in 2008. Two lung function tests were performed by each child for summer and winter seasons with simultaneous ambient air measurements of ozone (O3), nitrogen dioxide (NO2) and sulfur dioxide (SO2) by passive sampling. Effects of air pollution on impaired lung function and symptoms in schoolchildren were estimated by multivariate logistic regression analyses. Girls with impaired lung function (only for the summer season evaluation) were more observed in suburban and urban areas when compared to urban-traffic area ([odds ratio (OR) = 1.49; 95 % confidence interval (CI) 1.04-2.14] and [OR = 1.69 (95 % CI 1.06-2.71)] for suburban vs. urban-traffic and urban vs. urban-traffic, respectively). Significant association between ambient ozone concentrations and impaired lung function (for an increase of 10 μg m(-3)) was found only for girls for the summer season evaluation [OR = 1.11 (95 % CI 1.03-1.19)]. No association was found for boys and for the winter season evaluation. No association was found between any of the measured air pollutants and symptoms of current wheeze, current rhinoconjunctivitis and current itchy rash. The results of this study showed that increasing ozone concentrations may cause a sub-acute impairment in lung function of school aged children.

In the present study, ordered mesocage hexagonal P6mm and cubic Pm3n aluminosilica nanoadsorbents with monolith-like morphology and micro-, meso-, and macro-pores were fabricated using a simple, reproducible, direct synthesis. Our results suggest that the aluminosilica nanoadsorbents attained the ordering and uniform hexagonal and cubic pores even at the high Si/Al ratio of 4. The acidity of nanoadsorbents significantly based on the amount of aluminum species in the walls of the silica pore framework. Aluminosilica nanoadsorbents were used as a removal of environmentally toxic aromatic amines, namely p-nitroaniline (p-NA), from wastewater. The loading amount of Bronsted acid sites, mesostructural geometries, and multi-directional pores (3D) of the aluminosilica adsorbents played a key factor in the enhancement of the coverage adsorbent surfaces and intraparticle diffusion of adsorbate molecules onto the network surfaces and into the pore architectures of monoliths. Significantly, we developed theoretical models to explain the 3D microscopic geometry and the pore orientation of aluminosilica monoliths. A key component of the nanoadsorbents is the ability to create revisable p-NA adsorption systems with multiple reuse cycles. However, simple treatment using an acidic aqueous solution was found to remove effectively the p-NA and to form “p-NA-free” pore surfaces without any mesostructural damage.

3,4-Dichloroaniline (3,4-DCA), widely used in the synthesis of dyes, textile and herbicides, is toxic to living organisms. The purpose of this study was to investigate the capability of green algae in degrading and removing 3,4-DCA in water. An environmentally ubiquitous green alga Chlorella pyrenoidosa was isolated from fresh aquatic environment. Then unicellular alga was incubated with 3,4-DCA at a concentration of 4.6 μg/ mL in water. The residual concentration of 3,4-DCA in the medium and the metabolites were analyzed. A removal percentage of 78.4 % was obtained over a 7-day period. Two major metabolites with less toxicity were identified as 3,4-dichloroformanilide and 3,4-dichloroacetanilide from the liquid chromatography-electrospray ionization-mass spectrometry analysis. The application of microalga C. pyrenoidosa may have potential for removing the environmental pollutant in aquatic environment.

Nano zerovalent iron (nZVI) is an effective remediant for removing various organic and inorganic pollutants from contaminated water sources. Batch experiments were conducted to characterize the nZVI surface and to investigate the effects of various solution properties such as pH, initial cadmium concentration, sorbent dosage, ionic strength, and competitive ions on cadmium removal by nZVI. Energy-dispersive X-ray and X-ray photoelectron spectroscopy results confirmed removal of Cd ions by nZVI through adsorption. Cd adsorption decreased in the presence of competitive cations in the order: Zn > Co > Mg > Mn = Cu > Ca > Na = K. Higher concentrations of Cl significantly decreased the adsorption. Cadmium removal increased with solution pH and reached a maximum at pH 8.0. The effects of various solution properties indicated Cd adsorption on nZVI to be a chemisorption (inner-sphere complexation) process. The three surface complexation models (diffuse layer model, constant capacitance model, and triple layer model) fitted well to the adsorption edge experimental data indicating the formation of nZVI-Cd bidentate inner-sphere surface complexes. Our results suggest that nZVI can be effectively used for the removal of cadmium from contaminated water sources with varying chemical conditions.

Polychlorinated diphenyl ether (PCDE) has attracted great attention recently as an important type of environmental pollutant. The influence of iron and copper oxides on formation of PCDEs was investigated using laboratory-scale flow reactors under air and under nitrogen at 350 °C, a temperature corresponding to the post-combustion zone of a municipal solid waste incinerator. The results show that the 2,2',3,4,4',5,5',6-otachlorodiphenyl ether (OCDE) formed from the condensation of pentachlorophenol (PCP) and 1,2,4,5-tetrachlorobenzene (Cl4Bz) is the predominant congener formed on the SiO2/Fe2O3 surface with and without oxygen. This indicated that HCl elimination between PCP and 1,2,4,5-Cl4Bz molecules formed 2,2',3,4,4',5,5',6-OCDE in the presence of Fe2O3. On the other hand, decachlorodiphenyl ether, nonachlorodiphenyl ether, and OCDE were the dominant products on the SiO2/CuO surface without oxygen, although the 2,2',3,4,4',5,5',6-OCDE was the dominant product on the SiO2/CuO surface with oxygen. Therefore, the presence of Fe2O3 and CuO influences the formation and homologue distribution of PCDEs, which shifted towards the lower chlorinated species. Fe2O3 can promote both the condensation and dechlorination reaction without oxygen. On the contrary, with oxygen, Fe2O3 suppresses the condensation of chlorobenzene and chlorophenol to form PCDEs and polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). CuO can increase the formation of lower chlorinated PCDEs and PCDDs without oxygen. In conclusion, the different fly ash components have a major influence on PCDE emissions.

This study reports the synthesis and characterization of composite nitrogen and fluorine co-doped titanium dioxide (NF-TiO₂) for the removal of contaminants of concern in wastewater under visible and solar light. Monodisperse anatase TiO₂ nanoparticles of different sizes and Evonik P25 were assembled to immobilized NF-TiO₂ by direct incorporation into the sol–gel or by the layer-by-layer technique. The composite films were characterized with X-ray diffraction, high-resolution transmission electron microscopy, environmental scanning electron microscopy, and porosimetry analysis. The photocatalytic degradation of atrazine, carbamazepine, and caffeine was evaluated in a synthetic water solution and in an effluent from a hybrid biological concentrator reactor (BCR). Minor aggregation and improved distribution of monodisperse titania particles was obtained with NF-TiO₂-monodisperse (10 and 50 nm) from the layer-by-layer technique than with NF-TiO₂ + monodisperse TiO₂ (300 nm) directly incorporated into the sol. The photocatalysts synthesized with the layer-by-layer method achieved significantly higher degradation rates in contrast with NF-TiO₂-monodisperse titania (300 nm) and slightly faster values when compared with NF-TiO₂-P25. Using NF-TiO₂ layer-by-layer with monodisperse TiO₂ (50 nm) under solar light irradiation, the respective degradation rates in synthetic water and BCR effluent were 14.6 and 9.5 × 10⁻³ min⁻¹ for caffeine, 12.5 and 9.0 × 10⁻³ min⁻¹ for carbamazepine, and 10.9 and 5.8 × 10⁻³ min⁻¹ for atrazine. These results suggest that the layer-by-layer technique is a promising method for the synthesis of composite TiO₂-based films compared to the direct addition of nanoparticles into the sol.