In this study, the concentrations of volatile organic compounds were measured by the use of proton transfer reaction mass spectrometry, together with NO ₓ , NO, NO₂, SO₂, CO and PM₁₀ and meteorological parameters in an urban area of Belgrade during winter 2014. The multivariate receptor model US EPA Unmix was applied to the obtained dataset resolving six source profiles, which can be attributed to traffic-related emissions, gasoline evaporation/oil refineries, petrochemical industry/biogenic emissions, aged plumes, solid-fuel burning and local laboratories. Besides the vehicle exhaust, accounting for 27.6 % of the total mixing ratios, industrial emissions, which are present in three out of six resolved profiles, exert a significant impact on air quality in the urban area. The major contribution of regional and long-range transport was determined for source profiles associated with petrochemical industry/biogenic emissions (40 %) and gasoline evaporation/oil refineries (29 %) using trajectory sector analysis. The concentration-weighted trajectory model was applied with the aim of resolving the spatial distribution of potential distant sources, and the results indicated that emission sources from neighbouring countries, as well as from Slovakia, Greece, Poland and Scandinavian countries, significantly contribute to the observed concentrations.

Polychlorinated dibenzodioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) are toxic environmental pollutants that are often found in sediments. The Yangtze and Yellow rivers in China are two of the largest rivers in Asia and are therefore important aquatic ecosystems; however, few studies have investigated the PCDD/F and PCB content in the sediments of these rivers. Accordingly, this study was conducted to generate baseline data for future environmental risk assessments. In the present study, 26 surface sediments from the middle reaches of the Yellow and Yangtze rivers were analyzed for PCDD/Fs and dioxin-like (dl) PCBs by high-resolution gas chromatography and high-resolution mass spectrometry. The ranges of PCDD/F, dl-PCB, and WHO-TEQ content in sediments from the Yellow River were 2.1–19.8, 1.11–9.9, and 0.08–0.57 pg/g (dry weight), respectively. The ranges of PCDD/F, dl-PCB, and WHO-TEQ content in sediments from the Yangtze River were 6.1–84.9, 1.8–24.1, and 0.13–0.29 pg/g (dry weight), respectively. Total organic carbon and dl-PCB contents in the Yellow River were significantly correlated (Spearman’s correlation coefficient, r = 0.64, P < 0.05). It is well known that total organic carbon plays a role in the transport and redistribution of dl-PCB. Principal component analysis indicated that PCDD/Fs may arise from pentachlorophenol, sodium pentachlorophenate, and atmospheric deposition, while dl-PCBs likely originate from burning of coal and wood for domestic heating. The dioxin levels in the river sediments examined in this study were relatively low. These findings advance our knowledge regarding eco-toxicity and provide useful information regarding contamination sources.

This study analyses the seasonal trend of polychlorinated biphenyls (PCB) concentrations in air and soil from a high-altitude mountain pasture in the Italian Alps. PCB concentrations in soil were generally comparable to background levels and were lower than those previously measured in the same area. Only CB-209 unexpectedly showed high concentrations with respect to the other congeners. GC-MS-MS identification was very clear, rising a new problem of increasing PCB contamination concerning only CB-209, which is not present in commercial mixtures used in the past in Italy and Europe. Considering all of the congeners, seasonal PCB trends were observed both in air and in soil that were related to the temperature and precipitation measured specifically in the study area. Highly significant relationships were found between the temperature-normalised concentrations in soil and the precipitation amounts. A north/south enrichment factor was present only in soil with rapid early summer re-volatilisation kinetics from soil to air and autumn re-deposition events from air to soil. Fugacity ratio calculations confirmed these trends. Surface soils respond rapidly to meteorological variables, while subsurface soils respond much more slowly. Seasonal trends were different for the northern and southern sides of the mountain. A detailed picture of the interactions among temperature, precipitation, mountain aspects and soil features was obtained.

Pteridium aquilinum is a ubiquitous species considered to be one of the plants most resistant to metals. This fern meets the demands for a good bioindicator to improve environmental control. Therefore, it was of interest to survey the accumulation of Cr and Ni in the rhizome and fronds of this species collected in Lower Silesia (SW Poland) of serpentinite rich in Cr and Ni and granite poor in these metals. Additionally, concentrations of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn were measured in granite and serpentinite parent rocks, soils, and in P. aquilinum (rhizome and fronds). The experiment was carried out with rhizomes of ferns from both types of soils placed in pots supplemented with 50, 100, and 250 mg kg⁻¹ of Cr or Ni or both elements together. At a concentration of 250 mg kg⁻¹ of Cr, Ni, or Cr + Ni, fronds (from granite or serpentinite origin) contained significantly higher Cr and Ni concentrations when both metals were supplied together. In the same concentration of 250 mg kg⁻¹ of Cr, Ni, or Cr + Ni, rhizomes (from granite or serpentinite origin) contained significantly higher Cr and Ni concentrations when both metals were supplied separately. The explanation of metal differences in the joint accumulation of Cr and Ni on the rhizome or frond level needs further investigation. The lack of difference in Cr and Ni concentration in the rhizome and fronds between experimental P. aquilinum collected from granite and serpentinite soils may probably indicate that the phenotypic plasticity of this species is very important in the adaptation to extreme environments.

The efficiency of TiO₂ as a catalyst in the ozonation of humic acid (HA) was evaluated in a comprehensive manner. Ozonation, catalytic ozonation and adsorption experiments were conducted using both synthetic HA solution and natural water. HA degradation was evaluated in terms of DOC, VIS₄₀₀ and UV₂₅₄. It was shown that the addition of catalyst positively affects the mechanism of ozonation. An increase in HA degradation was observed for all these parameters. The impact of catalyst dose and initial pH value of HA on the efficacy of catalytic ozonation was investigated. The highest removal efficiencies were achieved with the dose of 1 g l⁻¹ of TiO₂ (Degussa P-25) and in the acidic pH region. The catalytic ozonation process was efficient also on natural water component although not at the same level as it was on synthetic water. The adsorptive feature of P-25 was considered to have a clear evidence of the catalytic ozonation mechanism. The mechanism of catalysis on the surface of metal oxides was elucidated with the help of quantum-chemical calculations. In the framework of Density Function Theory (DFT), the O₃ decomposition was calculated in the catalytic and non-catalytic processes. Donor–acceptor properties of the frontier (highest occupied and lowest unoccupied molecular orbitals, HOMO/LUMO) orbitals are discussed. Electron density distribution and reaction mechanism of superoxide particles formation, which participate in the process of HA ozonation are analyzed.

Constructed wetlands (CWs) have been used as an alternative to conventional technologies for wastewater treatment for more than five decades. Recently, the use of various modified CWs to improve treatment performance has also been reported in the literature. However, the available knowledge on various CW technologies considering the intensified and reliable removal of pollutants is still limited. Hence, this paper aims to provide an overview of the current development of CW strategies and techniques for enhanced wastewater treatment. Basic information on configurations and characteristics of different innovations was summarized. Then, overall treatment performance of those systems and their shortcomings were further discussed. Lastly, future perspectives were also identified for specialists to design more effective and sustainable CWs. This information is used to inspire some novel intensifying methodologies, and benefit the successful applications of potential CW technologies.

Spot sampling lacks representativeness for monitoring organic contaminants in most surface waters. Passive sampling has emerged as a cost-effective complementary sampling technique. We recently developed passive stir bar sorptive extraction (passive SBSE), with Twister from Gerstel, for monitoring moderately hydrophilic to hydrophobic pesticides (2.18 < log Kₒw < 5.11) in surface water. The aims of the present study were to assess this new passive sampler for the determination of representative average concentrations and to evaluate the contamination levels of two French rivers. Passive SBSE was evaluated for the monitoring of 16 pesticides in two rivers located in a small vineyard watershed during two 1-month field campaigns in spring 2010 and spring 2011. Passive SBSE was applied for periods of 1 or 2 weeks during the field campaigns and compared with spot sampling and weekly average automated sampling. The results showed that passive SBSE could achieve better time-representativeness than spot sampling and lower limits of quantification than automated sampling coupled with analytical SBSE for the pesticides studied. Finally, passive SBSE proved useful for revealing spatial and temporal variations in pesticide contamination of both rivers and the impact of rainfall and runoff on the river water quality.

The non-tanned proteinaceous tannery solid waste animal fleshing (ANFL), containing high nutritive value, was hydrolyzed using bacteria Selenomonas ruminantium HM000123 through submerged (SmF) and solid-state (SSF) fermentation processes. In addition, the effects of ANFL fermentative hydrolysate on growth, yield and biochemical properties of tomato plants were investigated. The treatments included T1 (SmF-ANFL), T2 (SSF-ANFL), T3 (recommended dose of NPK fertilizers) and a control without any amendment. Hydrolysates of both SmF-ANFL and SSF-ANFL treatments increased the biomass and yield as evidenced by plant height, stem girth, number of leaves and fruit yield when compared with both NPK and control plants. In this 90-day study, significant (p ≤ 0.05) changes were observed in SSF-ANFL treated plants compared to the other treatments. Protein profile analyzed through SDS-PAGE indicates the expression of a high molecular weight protein (205 kDa) and other proteins in the leaves of the SSF-ANFL treated plants. Overall results revealed that SSF-ANFL can be successfully utilized as a fertilizer particularly for cultivating tomato plants.

Bioaerosol concentration was measured in wastewater treatment units in south of Tehran, the largest wastewater treatment plant in the Middle East. Active sampling was carried out around four operational units and a point as background. The results showed that the aeration tank with an average of 1016 CFU/m³ in winter and 1973 CFU/m³ in summer had the greatest effect on emission of bacterial bioaerosols. In addition, primary treatment had the highest impact on fungal emission. Among the bacteria, Micrococcus spp. showed the widest emission in the winter, and Bacillus spp. was dominant in summer. Furthermore, fungi such as Penicillium spp. and Cladosporium spp. were the dominant types in the seasons. Overall, significant relationship was observed between meteorological parameters and the concentration of bacterial and fungal aerosols.

Soils sampled from different locations of China were used to manipulate soil microbial diversity and to assess the effect of the diversity of the soil nitrifying community on the recovery of the soil nitrification to metal stress (zinc). Ten treatments were either or not amended with ZnCl₂. Subsequently, a spike-on-spike assay was set up to test for the tolerance of soil nitrification to zinc (Zn) and copper (Cu). Initially, Zn amendment completely inhibited nitrification. After a year of Zn exposure, recovery of the potential nitrification rate in Zn-amended soils ranged from 28 to 126 % of the potential nitrification rate in the corresponding Zn-nonamended soils. This recovery was strongly related to the potential nitrification rate before Zn amendment and soil pH. Increased Zn tolerance of the soil nitrification was consistently observed in response to corresponding soil contamination. Co-tolerance to Cu was obtained in all 1,000-mg kg⁻¹ Zn-amended soils. This tolerance was also strongly related to the potential nitrification rate before Zn amendment and soil pH. Our data indicate that inherently microbial activity can be a significant factor for the recovery of soil functioning derived from metal contamination.