Ambient ozone (O₃) concentrations have shown an upward trend in China and its health hazards have also been recognized in recent years. High-resolution exposure data based on statistical models are needed. Our study aimed to build high-performance random forest (RF) models based on training data from 2013 to 2017 in the Beijing-Tianjin-Hebei (BTH) region in China at a 0.01 ° × 0.01 ° resolution, and estimated daily maximum 8h average O₃ (O₃-8hmax) concentration, daily average O₃ (O₃-mean) concentration, and daily maximum 1h O₃ (O₃-1hmax) concentration from 2010 to 2017. Model features included meteorological variables, chemical transport model output variables, geographic variables, and population data. The test-R² of sample-based O₃-8hmax, O₃-mean and O₃-1hmax models were all greater than 0.80, while the R² of site-based and date-based model were 0.68–0.87. From 2010 to 2017, O₃-8hmax, O₃-mean, and O₃-1hmax concentrations in the BTH region increased by 4.18 μg/m³, 0.11 μg/m³, and 4.71 μg/m³, especially in more developed regions. Due to the influence of weather conditions, which showed high contribution to the model, the long-term spatial distribution of O₃ concentrations indicated a similar pattern as altitude, where high concentration levels were distributed in regions with higher altitude.

Red mud and phosphogypsum are voluminous industrial by-products worldwide. They have long been disposed of in landfills or open storage, leading to a waste of resource and environmental pollution. This study provides a novel approach to recycle these industrial by-products as sustainable red mud-phosphogypsum-Portland cement (RPPC) binders for stabilization/solidification (S/S) of multimetal-contaminated soil. The physical strength, metal leachability and microstructure of S/S soil were investigated after 7-day and 28-day curing, as well as freezing-thawing (F-T) cycle and wetting-drying (W-D) cycle. The results show that the strength of soil treated by all binders fulfilled the uniaxial compressive strength requirement (350 kPa) of S/S waste in landfills. Microstructural analyses show that the main hydration products of the RPPC S/S soil are ilmenite, ettringite, anhydrite and hydrated calcium silicate. The 10% and 15% RPPC binders have a competitive metal immobilization ability compared with 10% PC, but the immobilization priority is different: Pb > Zn > Cd in RPPC system and Zn > Cd > Pb in PC system, respectively, probably due to the precipiataion of Pb²⁺ with the abundant SO₄²⁻ in phosphogypsum in RPPC system. The strength of RPPC and PC treated soil was still higher than 350 kPa except for RPPC7.5 after 10 freeze-thaw or 10 wetting-drying cycles. The RPPC binder performed worse than PC binder after both freeze-thaw and wetting-drying cycles, especially at a lower dosage. Only the metal leaching concentrations of samples treated by RPPC15 and PC10 could fulfil the Chinese standards for hazardous wastes.

To help understand the pathophysiologic mechanisms linking air pollutants and cardiovascular disease (CVD), we employed a repeated measures design to investigate the associations of four short-term air pollution exposures – particulate matter less than 2.5 μm in diameter (PM₂.₅), nitrogen dioxide (NO₂), ozone (O₃) and sulfur dioxide (SO₂), with two blood markers involved in vascular effects of oxidative stress, soluble lectin-like oxidized LDL receptor-1 (sLOX-1) and nitrite, using data from the Multi-Ethnic Study of Atherosclerosis (MESA). Seven hundred and forty participants with plasma sLOX-1 and nitrite measurements at three exams between 2002 and 2007 were included. Daily PM₂.₅, NO₂, O₃ and SO₂ zero to seven days prior to blood draw were estimated from central monitors in six MESA regions, pre-adjusted using site-specific splines of meteorology and temporal trends, and an indicator for day of the week. Unconstrained distributed lag generalized estimating equations were used to estimate net effects over eight days with adjustment for sociodemographic and behavioral factors. The results showed that higher short-term concentrations of PM₂.₅, but not other pollutants, were associated with increased sLOX-1 analyzed both as a continuous outcome (percent change per interquartile increase: 16.36%, 95%CI: 0.1–35.26%) and dichotomized at the median (odds ratio per interquartile increase: 1.21, 95%CI: 1.01–1.44). The findings were not meaningfully changed after adjustment for additional covariates or in several sensitivity analyses. Pollutant concentrations were not associated with nitrite levels. This study extends earlier experimental findings of increased sLOX-1 levels following PM inhalation to a much larger population and at ambient concentrations. In light of its known mechanistic role in promoting vascular disease, sLOX-1 may be a suitable translational biomarker linking air pollutant exposures and cardiovascular outcomes.

Bisphenol A (BPA), an endocrine-disrupting chemical that is largely produced and used in the plastics industry, causes environmental pollution and is absorbed by humans through consumption of food and liquids in polycarbonate containers. BPA exerts developmental and genetic toxicities to embryos and offsprings, but the embryotoxicity mechanism of this chemical is unclear. This study aimed to explore the toxic effect of BPA on embryonic development and elucidate its toxicity mechanism. Embryos of Xenopus laevis as a model were treated with different concentrations (0.1, 1, 10, and 20 μM) of BPA at the two-cell stage to investigate the developmental toxicity of BPA. Embryonic development and behaviors were monitored 24 h–96 h of BPA exposure. BPA concentrations greater than 1 μM exerted significant teratogenic effects on the Xenopus embryos, which showed short tail axis, miscoiled guts, and bent notochord as the main malformations. The 20 μM BPA-treated embryos were seriously damaged in all aspects and exhibited deformity, impaired behavioral ability, and tissue damage. The DNA integrity and apoptosis of the Xenopus embryos were also investigated. Exposure to BPA concentrations higher than 0.1 μM significantly induced DNA damage (p < 0.05). The 10 and 20 μM BPA-treated embryos exhibited higher levels of cleaved caspase-3 protein than the control. The ratios of bax/bcl-2 mRNA were significantly higher in the 10 μM and 20 μM-treated embryos than the ratio in the control group. Overall, data indicated that BPA can delay the early development, induce DNA damage and apoptosis, and eventually cause multiple malformations in Xenopus embryos.

As an important form of urban water resource, urban artificial lakes are severely affected by rapid urbanization and interference from human activities. These small lakes are characterized by their unique irregular shape, fragile ecosystem, and relatively closed, stagnant waterbodies. However, few studies have focused on their hydrodynamics and water quality, in particular the restoration methods and mechanisms remaining unclear. The present study applied the MIKE 21 FM model to investigate the effects of water diversion on water quality in a typical urban artificial lake. By considering different flow arrangements, several model scenarios were set up to predict the impacts of water diversion on selected water quality parameter. The results showed that the effectiveness of water diversion was directly related to flow velocity, the relative position to the fresh water inlet, the amount and quality of fresh water and water remaining to be diluted, and the circulation direction of flow field. The inflow–outflow arrangement was the primary factor determining the flow field and NH₃–N variation trends across the lake, and an increased discharge exhibited unequal effects in individual zones. Wind was also important for the formation of flow circulation and pollutant variation. Methods were proposed for enhancing water quality in urban small-scale lakes, including changing the way diversion projects are managed, improving the quality of diverted flow, enhancing flow fluidity, or utilizing wind effects and local topography.

The increasing human presence is having an impact on plateau ecosystems, but the special environment and lack of data make it difficult to assess the real ecological risks of pharmaceutical and personal care products (PPCPs) in the river of plateau. The occurrence, distribution and trophic transfer of nineteen PPCPs were investigated in the middle and lower reaches of the Yarlung Zangbo River on the Tibetan Plateau. All the targeted PPCPs were detected in filtrated water, and seventeen PPCPs were detected in the colloid, sediment and suspended particulate matter (SPM). The distribution coefficients of colloid-infiltration water (IFW) were 1–2 orders of magnitude larger than those in the SPM-IFW, which were 1–2 orders of magnitude greater than those in the sediment-IFW. Colloids are sinks for PPCPs with up to 78.55% of the water being in the colloidal phase, in which important factors such as protein and protein-like substances are found. PPCPs in the rivers of the plateau showed high bioaccumulation ability. The fugacity-based bioaccumulation model was established and revealed that the fish in the Tibetan Plateau ingested PPCPs mainly through water instead of food and excreted them mainly through metabolism. In addition, the trophic dilution effect in the food web was observed with trophic magnification factors ranging from 0.06 to 0.22. The positive correlation between the Kd in the colloid-IFW and the bioaccumulation factors implied that natural colloids can not only regulate the behaviour of PPCPs in the environment, but also play an important role in bioaccumulation, which may affect the scientific nature of biological risk assessment.

Microplastic pollution is widely recognised as a global issue, posing risks to natural ecosystems and human health. The combination of rapid industrial and urban development and relatively limited environmental regulation in many tropical countries may increase the amount of microplastic entering rivers, but basic data on contamination levels are lacking. This is especially the case in tropical South East Asian countries. In this paper, the abundance, composition and spatio-temporal variation of microplastic in the Langat River, Malaysia, were assessed, and the relationship between microplastic concentration and river discharge was investigated. Water samples were collected over a 12-month period from 8 sampling sites on the Langat, extending from forested to heavily urbanised and industrial areas. All 508 water samples collected over this period contained microplastic; mean concentration across all sites and times was 4.39 particles/L but extended up to 90.00 particles/L in some urban tributaries. Most microplastics were secondary in origin, and dominated by fibres. Microplastic counts correlated directly with river discharge, and counts increased and decreased in response to changes in flow. A time-integrated assessment of the microplastic load conveyed by the Langat suggested that the river is typically (50 % of the time) delivering around 5 billion particles per day to the ocean. The positive correlation between the concentration of microplastics and suspended sediments in the Langat suggested that continuously logging turbidity sensors could be used to provide better estimates of microplastic loads and improve assessment of human and ecological health risks.

Sete Cidades Lake (São Miguel Island, Portugal) is subdivided into two interconnected branches: the Green Lake and Blue Lake. The lake has an area and maximum depth of 4.39 km² and 29.5 m (Blue Lake), respectively, with evidence of eutrophication, particularly in the northern area of the Green Lake. In this study, we conducted a sampling survey during January 2017 to measure CO₂ fluxes from the lake using a floating accumulation chamber. We also produced two hydrogeochemical profiles for each of the lake’s branches. A total of 1760 CO₂ flux measurements were taken along the lake’s surface. The lake water was relatively cold (14.0 °C on average) and weakly mineralised (average electrical conductivity of 116 μS cm⁻¹) with a neutral pH (7.7 on average). The relative composition of major ions occurred in the following decreasing order: Na⁺ > Mg²⁺ > Ca²⁺ > K⁺ for cations and Cl⁻ > HCO₃⁻ > SO₄²⁻ for anions. The lake water was mainly the Na–Cl type due to sea salt input from seawater spraying. CO₂ fluxes ranged from 0.3 to 17.2 g m⁻² d⁻¹ and from 2.1 to 17.9 g m⁻² d⁻¹ for the Blue and Green Lakes, respectively. Highest CO₂ degassing occurred in areas dominated by macrophytes and algal blooms. The measured values suggest that the CO₂ was predominantly biogenically sourced, which was further supported by the δ¹³C isotopic data. The estimated total CO₂ emissions varied between 5.8 t d⁻¹ (Green Lake; area = 0.81 km²) and 24.9 t d⁻¹ (Blue Lake; area = 3.58 km²). This study further elucidates the lake’s trophic and chemical pollution status and has major implications for lacustrine CO₂ emissions to the atmosphere. Our study also provides a reference for understanding potential future variations in volcanic activity.

The determination of both stable nitrogen (δ¹⁵N–NO₃⁻) and stable oxygen (δ¹⁸O–NO₃⁻) isotopic signatures of nitrate in PM₂.₅ has shown potential for an approach of assessing the sources and oxidation pathways of atmospheric NOx (NO+NO₂). In the present study, daily PM₂.₅ samples were collected in the megacity of Beijing, China during the winter of 2017–2018, and this new approach was used to reveal the origin and oxidation pathways of atmospheric NOx. Specifically, the potential of field δ¹⁵N–NO₃⁻ signatures for determining the NOx oxidation chemistry was explored. Positive correlations between δ¹⁸O–NO₃⁻ and δ¹⁵N–NO₃⁻ were observed (with R² between 0.51 and 0.66, p < 0.01), and the underlying environmental significance was discussed. The results showed that the pathway-specific contributions to NO₃⁻ formation were approximately 45.3% from the OH pathway, 46.5% from N₂O₅ hydrolysis, and 8.2% from the NO₃+HC channel based on the δ¹⁸O-δ¹⁵N space of NO₃⁻. The overall nitrogen isotopic fractionation factor (εN) from NOx to NO₃⁻ on a daily scale, under winter conditions, was approximately +16.1‰±1.8‰ (consistent with previous reports). Two independent approaches were used to simulate the daily and monthly ambient NOx mixtures (δ¹⁵N-NOx), respectively. Results indicated that the monthly mean values of δ¹⁵N-NOx compared well based on the two approaches, with values of −5.5‰ ± 2.6‰, −2.7‰ ± 1.9‰, and −3.2‰ ± 2.2‰ for November, December, and January (2017–2018), respectively. The uncertainty was in the order of 5%, 5‰ and 5.2‰ for the pathway-specific contributions, the εN, and δ¹⁵N-NOx, respectively. Results also indicated that vehicular exhaust was the key contributor to the wintertime atmospheric NOx in Beijing (2017–2018). Our advanced isotopic perspective will support the future assessment of the origin and oxidation of urban atmospheric NOx.

Phosphorus-inactivating agents (PIAs) as geoengineering tools in lakes have been investigated extensively, but PIA resuspension in the photic layer occurs frequently in shallow lakes and little is known about the influence of algae on PIA performance. Our results proved that algae increased the dissolved oxygen, pH and dissolved organic carbon concentration substantially. In the absence of sediment, lanthanum modified zeolite (LMZ) as a representative PIA and algae could deplete dissolved inorganic phosphorus (DIP) from water but the former was faster than the latter. When LMZ and algae coexisted, the amount of phosphorus that was captured by LMZ was 3.1 times greater than that taken up by algae. An increase in pH or dissolved organic carbon increased the zero-equilibrium phosphorus concentration (EPC₀) of the sediment but LMZ addition could lower the EPC₀ and reduce the risk of phosphorus release during the algal blooming season. In the presence of sediment, LMZ reduced the DIP concentration more rapidly and yielded a lower final DIP concentration compared with algae. In conclusion, the influence of algae on the performance of LMZ by (i) taking up DIP to reduce the availability of DIP and convert DIP into a releasable phosphorus form and (ii) increasing the pH and dissolved organic carbon concentration to hinder the adsorption ability of DIP were recognized. The LMZ performed well, even in the presence of algae.