In Mexico, the mangrove is distributed in 764,486 ha, comprising the Atlantic coast from the Laguna Madre in Tamaulipas to Chetumal Bay in the Caribbean and in the Pacific from Ensenada, Baja California to Chiapas. On the coast of Oaxaca, coexist four species: red mangrove (Rhizophora mangle), white mangrove (Laguncularia racemosa) button mangrove (Conocarpus erectus) and black mangrove (Aviccenia germinans). In the Laguna “Salina” Tonameca, grows and develops the white, button, and black mangroves, whose spatial distribution decreases by deforestation, land use change, and increased saline substrate. Salinity of soil and waters, its concentration, and tipogenesis associated with the growth of mangrove trees were determined. Three saline gradients were identified in rainy season (gradient I: 2.18 dS m⁻¹; gradient II: 9.95 dS m⁻¹ and gradient III: 36.14 dS m⁻¹); while in drought season four gradients were detected (gradient I: 1.15 dS m⁻¹; II: 17.83 dS m⁻¹; III: 39.06 dS m⁻¹ and IV: 57.75 dS m⁻¹). The interannual saline variation is due to climatics, hydrologycal, and geomorpholigical conditions of the substrate. The lake salinity is hydrochloric, predominantly NaCl salt, of intense osmotic effect, which largely explains the mangrove halophytism. Moisture diluting brackish water, such that low salt conditions promotes growth and development of mangrove, but at concentrations > 35 g L⁻¹ limits their growth. In drought, hypersaline (>70 g L⁻¹) prevents the establishment and repopulation of this species.

Agricultural management practices are among the major drivers of agricultural nitrogen (N) loss. Legislation and management incentives for measures to mitigate N loss should eventually be carried out at the individual farm level. Consequently, an appropriate scale to simulate N loss from a scientific perspective should be at the farm scale. A data set of more than 4000 agricultural fields with combinations of climate, soils and agricultural management which overall describes the variations found in the Baltic Sea drainage basin was constructed. The soil–vegetation–atmosphere model Daisy (Hansen et al. 2012) was used to simulate N loss from the root zone of all agricultural fields in the data set. From the data set of Daisy simulations, we identified the most important drivers for N loss by multiple regression statistics and developed a statistical N loss model. By applying this model to a basin-wide data set on climate, soils and agricultural management at a 10 × 10 km scale, we were able to calculate root-zone N losses from the entire Baltic Sea drainage basin and identify N loss hot spots in a consistent way and at a level of detail not hitherto seen for this area. Further, the root-zone N loss model was coupled to estimates of nitrogen retention in catchments separated into retention in groundwater and retention in surface waters allowing calculation of the coastal N loading.

Information on the phytotoxicity of nanoparticles (NPs) at low concentrations (e.g., ppb to low ppm) is scarce. Therefore, this study was conducted to assess the effects of laboratory-prepared Cu, Zn, Mn, and Fe oxide NPs in low concentrations (<50 ppm) on the germination of lettuce (Lactuca sativa) seeds in a water medium. The data showed that CuO NPs were slightly more toxic than Cu ions while the toxicity of ZnO NPs was similar to that of Zn ions, and MnOx NPs and FeOx NPs were not only less toxic than their ionic counterparts but also significantly stimulated the growth of lettuce seedlings by 12–54 %. This study showed that manufactured NPs were not always more toxic than other chemical species containing the same elements. Instead, Mn or Fe NPs can significantly enhance plant growth and have the potential to be effective nanofertilizers for increasing agronomic productivity.

Biofumigation is considered a good alternative to chemical fumigation because it can control crop pathogens and diseases with lower health and environmental risks than chemical fumigants. Glucosinolates are volatile compounds found in most Brassica species, and when hydrolysed, it forms a range of natural toxins including isothiocyanates that act as biofumigants. However, the effect of glucosinolates and their breakdown products on non-target and beneficial soil organisms is not well documented. Three biofumigants, broccoli, mustard and oilseed radish, were evaluated for their effect on earthworms (Eisenia andrei) and the soil microbial community. Sub-lethal endpoints, including growth and reproductive success of the earthworms, were monitored. Genotoxicity of the biofumigants towards earthworms was evaluated by means of the comet assay. Broccoli reduced earthworm reproduction while mustard induced more DNA strand breaks in earthworm cells compared to the control. Soil microbial community function and structure were evaluated by means of community level physiological profiling and phospholipid fatty acid analyses. The effects exerted by the biofumigants on the microbial community were the most pronounced within the first 14 days after application. Carbon substrate utilisation was most affected by the oilseed radish treatment and microbial community structure by the mustard treatment.

Open-cut mining operations can form pit lakes on mine closure. These new water bodies typically have low nutrient concentrations and may have acidic and metal-contaminated waters from acid mine drainage (AMD) causing low algal biomass and algal biodiversity. A preliminary study was carried out on an acidic coal pit lake, Lake Kepwari, in Western Australia to determine which factors limited algal biomass. Water quality was monitored to obtain baseline data. pH ranged between 3.7 and 4.1, and solute concentrations were slightly elevated to levels of brackish water. Concentrations of N were highly relative to natural lakes, although concentrations of FRP (<0.01 mg/L) and C (total C 0.7–3.7 and DOC 0.7–3.5 mg/L) were very low, and as a result, algal growth was also extremely low. Microcosm experiment was conducted to test the hypothesis that nutrient enrichment will be able to stimulate algal growth regardless of water quality. Microcosms of Lake Kepwari water were amended with N, P and C nutrients with and without sediment. Nutrient amendments under microcosm conditions could not show any significant phytoplankton growth but was able to promote benthic algal growth. P amendments without sediment showed a statistically higher mean algal biomass concentration than controls or microcosms amended with phosphorus but with sediment did. Results indicated that algal biomass in acidic pit lake (Lake Kepwari) may be limited primarily by low nutrient concentrations (especially phosphorus) and not by low pH or elevated metal concentrations. Furthermore, sediment processes may also reduce the nutrient availability.

Fe₂O₃ and CeO₂ modified activated coke (AC) synthesized by the equivalent-volume impregnation were employed to remove elemental mercury (Hg⁰) from simulated flue gas at a low temperature. Effects of the mass ratio of Fe₂O₃ and CeO₂, reaction temperature, and individual flue gas components including O₂, NO, SO₂, and H₂O (g) on Hg⁰ removal efficiency of impregnated AC were investigated. The samples were characterized by Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Results showed that with optimal mass percentage of 3 % Fe₂O₃ and 3 % CeO₂ on Fe3Ce3/AC, the Hg⁰ removal efficiency could reach an average of 88.29 % at 110 °C. Besides, it was observed that O₂ and NO exhibited a promotional effect on Hg⁰ removal, H₂O (g) exerted a suppressive effect, and SO₂ showed an insignificant inhibition without O₂ to some extent. The analysis of XPS indicated that the main species of mercury on used Fe3Ce3/AC was HgO, which implied that adsorption and catalytic oxidation were both included in Hg⁰ removal. Furthermore, the lattice oxygen, chemisorbed oxygen, and/or weakly bonded oxygen species made a contribution to Hg⁰ oxidation.

The cleansing efficiencies of laundry detergents depend on composition and variation of ingredients such as surfactants, phosphate, and co-builders. Among these ingredients, surfactants and phosphate are considered as hazardous materials. Knowledge on compositions and micellar behavior is very useful for understanding their cleansing efficiencies and environmental impact. With this view, composition, critical micelle concentration, and dissolved oxygen level in aqueous solution of some laundry detergents available in Bangladesh such as keya, Wheel Power White, Tibet, Surf Excel, and Chaka were determined. Surfactant and phosphate were found to be maximum in Surf Excel and Wheel Power White, respectively, while both of the ingredients were found to be minimum in Tibet. The critical micelle concentration decreased with increasing surfactant content. The amount of laundry detergents required for efficient cleansing was found to be minimum for Surf Excel and maximum for Chaka; however, cleansing cost was the highest for Surf Excel and the lowest for Tibet. The maximum amount of surfactants and phosphate was discharged by Surf Excel and Wheel Power White, respectively, while discharges of both of the ingredients were minimum for Tibet. The maximum decrease of dissolved oxygen level was caused by Surf Excel and the minimum by Tibet. Therefore, it can be concluded that Tibet is cost-effective and environment friendly, whereas Surf Excel and Wheel Power White are expensive and pose a threat to water environment.

More attention has been paid to the deterioration of water bodies polluted by drinking water treatment sludge (DWTS) in recent years. It is important to develop methods to effectively treat DWTS by avoiding secondary pollution. We report herein a novel investigation for recovery of Si and Fe from DWTS, which are used for the synthesis of two iron oxide@SiO₂ composites for adsorption of reactive red X-3B (RRX-3B) and NaNO₂. The results show that Fe³⁺ (acid-leaching) and Si⁴⁺ (basic-leaching) can be successfully recovered from roasted DWTS. Whether to dissolve Fe(OH)₃ precipitation is the key point for obtaining Fe₃O₄ or γ-Fe₂O₃ particles using the solvothermal method. The magnetic characteristics of Fe₃O₄@SiO₂ (390.0 m² g⁻¹) or Fe₂O₃@SiO₂ (220.9 m² g⁻¹) are slightly influenced by the coated porous SiO₂ layer. Peaks of Fe–O stretching vibration (580 cm⁻¹) and asymmetric Si–O–Si stretching vibrations (1080 cm⁻¹) of Fe₃O₄@SiO₂ indicate the successful coating of a thin silica layer (20–150 nm). The adsorption capacity of RRX-3B and NaNO₂ by Fe₃O₄@SiO₂ is better than that of Fe₂O₃@SiO₂, and both composites can be recycled through an external magnetic field. This method is an efficient and environmentally friendly method for recycling DWTS.

Since it was commercially introduced in 1974, glyphosate has been one of the most commonly used herbicides in agriculture worldwide, and there is growing concern about its adverse effects on the environment. Assuming that glyphosate may increase the organic turbidity of water bodies, we evaluated the effect of a single application of 2.4 ± 0.1 mg l⁻¹ of glyphosate (technical grade) on freshwater bacterioplankton and phytoplankton (pico, micro, and nanophytoplankton) and on the physical and chemical properties of the water. We used outdoor experimental mesocosms under clear and oligotrophic (phytoplanktonic chlorophyll a = 2.04 μg l⁻¹; turbidity = 2.0 NTU) and organic turbid and eutrophic (phytoplanktonic chlorophyll a = 50.3 μg l⁻¹; turbidity = 16.0 NTU) scenarios. Samplings were conducted at the beginning of the experiment and at 1, 8, 19, and 33 days after glyphosate addition. For both typologies, the herbicide affected the abiotic water properties (with a marked increase in total phosphorus), but it did not affect the structure of micro and nanophytoplankton. In clear waters, glyphosate treatment induced a trend toward higher bacteria and picoeukaryotes abundances, while there was a 2 to 2.5-fold increase in picocyanobacteria number. In turbid waters, without picoeukaryotes at the beginning of the experiment, glyphosate decreased bacteria abundance but increased the number of picocyanobacteria, suggesting a direct favorable effect. Moreover, our results show that the impact of the herbicide was observed in microorganisms from both oligo and eutrophic conditions, indicating that the impact would be independent of the trophic status of the water body.

Soil microbial communities play an important role in the biodegradation of different petroleum derivates, including hydrocarbons. Also other biological factors such as enzyme and respiration activities and microbial abundance are sensitive to contamination with petroleum derivates. The aim of this study was to evaluate the response of autochthonic microbial community and biological parameters (respiration, dehydrogenase and catalase activities, total microorganisms count) on contamination with car fuels and engine oils. The surface layer (0–20 cm) of Mollic Gleysol was used for the experiment. In laboratory conditions, soil was contaminated with the following petroleum substances: car fuels (petrol, diesel) and car engine oils (new and waste—after 10,000 km). The results demonstrated that, among the investigated hydrocarbon substances, petrol addition seemed to be the most toxic for the microbial activity of the investigated soil. The toxicity of the used hydrocarbon substances to microorganisms might be summarized as follows: diesel > new oil > waste oil > petrol. Species belonging to the genera Micrococcus and Rhodococcus were noted as the major autochthonic bacteria being present in soil contaminated with new automobile oil, whereas species of the genera Bacillus sp. and Paenibacillus sp. were identified in the combination treated with waste oil.