The presence of cyanotoxins, mainly microcystins (MCs), in surface freshwater represents a serious health risk to aquatic organisms living in the water body, as well as terrestrial animals and plants that are in contact with contaminated water. Consequently, the use of MCs contaminated water for irrigation represents a hazard for cultivated plants and could induce severe economical losses due to crops' yield reduction. The experimental approach undertaken in this work was exposing Vicia faba seedlings (inoculated with a Rhizobium strain resistant to MCs), to water supplemented with cyanobacterial crude extract containing total microcystins at a concentration of 50 and 100 μg/L (environmental relevant concentrations of MCs dissolved in the raw irrigation water from Lalla Takerkoust Lake-Marrakesh region). After chronic MCs exposure (2 months), biological and physiological parameters (plant growth, nitrogen uptake, mineral assimilation, and oxidative defense mechanisms) were evaluated. The results obtained showed evidence that chronic exposure to cyanobacterial bloom extract containing MCs strongly affected the physiological and biological plants activities; reduction of dry matter, photosynthetic activity, nodule number, and nitrogen assimilation. At the same time, an increase of oxidative stress was observed, as deduced from a significant increase of the activities of peroxidase, catalase, polyphenoloxidase, and phenylalanine ammonia lyase in leaves, roots, and nodules of faba bean plants exposed to cyanotoxins, especially at 100 μg/L of MCs. This experimentation constitutes a simulation of the situation related to cyanotoxins chronic exposure of seedlings-plants via the contaminated irrigation water. For this reason, once should take into consideration the possibility of contamination of agricultural crops and the quality of irrigation water should be by the way monitored for cyanotoxins biohazard.

This research investigated the feasibility of changing waste into useful materials for water treatment and proposed a coagulation–magnetic separation technique. This technique was rapid and highly effective for clearing up harmful algal blooms in freshwater and mitigating lake eutrophication. A magnetic coagulant was synthesized by compounding acid-modified fly ash with magnetite (Fe₃O₄). Its removal effects on algal cells and dissolved organics in water were studied. After mixing, coagulation, and magnetic separation, the flocs obtained from the magnet surface were examined by SEM. Treated samples were withdrawn for the content determination of chlorophyll-a, turbidity, chemical oxygen demand (COD), total nitrogen, and total phosphorus. More than 99 % of algal cells were removed within 5 min after the addition of magnetic coagulant at optimal loadings (200 mg L⁻¹). The removal efficiencies of COD, total nitrogen, and phosphorus were 93, 91, and 94 %, respectively. The mechanism of algal removal explored preliminarily showed that the magnetic coagulant played multiple roles in mesoporous adsorption, netting and bridging, as well as high magnetic responsiveness to a magnetic field. The magnetic–coagulation separation method can rapidly and effectively remove algae from water bodies and greatly mitigate eutrophication of freshwater using a new magnetic coagulant. The method has good performance, is low cost, can turn waste into something valuable, and provides reference and directions for future pilot and production scale-ups.

Information on the relationship between black carbon (BC) and particle number levels in urban areas is limited. Therefore, investigating the relationship between BC and particle number levels in different particle size ranges at an urban area is worthwhile. This study used an aethalometer and scanning mobility particle sizer to measure the levels of BC and particle number simultaneously at an urban roadside in Taipei City. Measurement results show that hourly BC levels are 0.62–8.80 μg m⁻³ (mean = 3.50 μg m⁻³) and hourly particle number levels are 4.21 × 10³–4.64 × 10⁴ particles cm⁻³ (mean = 2.00 × 10⁴ particles cm⁻³) in Taipei urban area. The BC and particle number levels peak during morning (7:00–9:00) and evening (16:00–18:00) rush hours on weekdays. Low BC and particle number levels exist in the early morning hours. Time variations in BC levels are the same as those of particle number levels in this study, clearly indicating that BC and particles are likely released from the same emission source. Additionally, BC levels in the urban area are more strongly associated with ultrafine particle levels than with total particle number levels, particularly in the size range of 56–180 nm. According to measurement results, most BC in aerosols in urban areas can be in the ultrafine size range.

In order to screen dioxin pollution in sediment of Three Gorges Dam (TGD) area, three sediment cores were obtained from two sites in 2010~2011; each core was divided into different samples with every 10 cm depth. Sediment dating determined by radiometry (¹³⁷Cs, ²¹⁰Pb) and concentrations of dioxins were analyzed by high-resolution gas chromatography/mass spectrometry. The results indicated: Sediment dating showed no significant difference among all the samples from the same core and the two locations (ANOVA, p > 0.05). The total amount of polychlorinated dibenzo-p-dioxins (PCDD)/Fs in all sample ranged from 30.7 to 371 pg/g dry weight (d.w.), with the mean value of 66.2 pg/g d.w. PCDDs occupied 60.33~85.22 % of dioxins in each sample, and PCDFs contributed to a very small extend. There was no significant difference in the dioxin concentration between 2010 and 2011 and in the two locations (t test, p > 0.05), but the vertical distribution of dioxins showed significant different in different depths. Toxic equivalent (TEQ) (WHO 2005, Humans) of samples ranged from 0.15 to 1.60 pg/g d.w.; the mean was 0.41 pg/g d.w. No significant difference was found in TEQ between 2010 and 2011(t test, p > 0.05). It could be concluded that the distribution of dioxins showed the spatial heterogeneous which resulted from the strong mixing and sediment deposition characteristics. Dioxin concentration in sediment cores was low with very low environmental risk potential. Dioxins at the two sites had the same origin, and exogenous input was the main source. It is the first report on the dioxins concentrations in sediment cores in the TGD area.

As(V) retention capacity is determined by means of adsorption/desorption trials performed for coarse and fine ground mussel shell, forest and vineyard soils with or without fine shell, pine wood ash, oak wood ash, pine sawdust and slate-processing fines. Pine ash shows the highest arsenic retention potential (with >97 % adsorption and ≤1 % desorption), followed by shell-amended forest soil (adsorption between 96 and 92 %), by un-amended forest soil (adsorption between 98 and 86 %) and by the amended vineyard soil (adsorption between 92 and 75 %). Sawdust is the material with the lowest arsenic retention capacity in most cases, with un-amended vineyard soil also showing poor results. In the case of oak ash, As(V) percentage adsorption becomes higher with increasing added arsenic concentrations, while this increase in added arsenic causes lower percentage adsorption in the case of slate fines. Regarding adsorption ability, As(V) adsorption data were fitted to Freundlich and Langmuir models, showing good fitting, with pine ash and shell-amended forest soil having the highest K F values. In view of that, mussel shell amendment would be useful to increase arsenic retention on forest and vineyard soils, while pine ash could be used to retain arsenic even from wastewaters.

The formation of several by-products from the photodegradation of testosterone was previously observed under laboratory conditions. The objectives of the manuscript were to complete the identification of testosterone’s photoproducts and to develop an analytical method for the detection of testosterone as well as its three main photoproducts in natural sunlit surface waters. To accomplish these tasks, an efficient extraction method was developed based on solid-phase extraction, followed by the use of liquid chromatography coupled to tandem mass spectrometry, a selective and sensitive detection method. This analytical procedure has the capability of detecting target analytes in the ng/L range, with recoveries above 80 %. The methodology was successfully applied to the analysis of testosterone and its photoproducts in several surface waters.

Hyperaccumulators contain tubular cellulose and heavy metals, which can be used as the sources of carbon and metals to synthesize nanomaterials. In this paper, carbon nanotubes (CNTs), Cu₀.₀₅Zn₀.₉₅O nanoparticles, and CNTs/Cu₀.₀₅Zn₀.₉₅O nanocomposites were synthesized using Brassica juncea L. plants, and the ultraviolet (UV)-light-driven photocatalytic degradations of bisphenol A (BPA) using them as photocatalysts were studied. It was found that the outer diameter of CNTs was around 50 nm and there were a few defects in the crystal lattice. The synthesized Cu₀.₀₅Zn₀.₉₅O nanocomposites had a diameter of around 40 nm. Cu₀.₀₅Zn₀.₉₅O nanocomposites have grown on the surface of the CNTs and the outer diameter of them was around 100 nm. The synthesized hybrid carbon nanotubes using B. juncea could enhance the efficiency of photocatalytic degradation on BPA. The complete equilibration time of adsorption/desorption of BPA onto the surface of CNTs, Cu₀.₀₅Zn₀.₉₅O nanoparticles, and CNTs/Cu₀.₀₅Zn₀.₉₅O nanocomposites was within 30, 20, and 30 min, and approximately 14.9, 8.7, and 17.4 % BPA was adsorbed by them, respectively. The combination of UV light irradiation (90 min) with CNTs, Cu₀.₀₅Zn₀.₉₅O nanoparticles, and CNTs/Cu₀.₀₅Zn₀.₉₅O nanocomposites could lead to 48.3, 75.7, and 92.6 % decomposition yields of BPA, respectively. These findings constitute a new insight for synthesizing nanocatalyst by reusing hyperaccumulators.

In this study, the occurrence and sources of five cataloged antibiotics and metabolites were studied in Jiulongjiang River basin, south China. Nineteen antibiotics and 13 metabolites were detected in water samples from 16 river sampling sites, wastewater from 5 swine-raising facilities, and effluent from 5 wastewater treatment plants (WWTPs). The results showed that 12 antibiotics and 6 metabolites were detected in river water samples. Sulfonamides (SAs) and their metabolites were detected at high concentrations (8.59-158.94 ng/L). Tetracyclines (TCs) and their metabolites were frequently detected in swine wastewater, and the maximum concentration was up to the level in milligram per liter. Macrolides (MLs) and β-lactams (β-Ls) were found in all WWTP effluent samples and some river samples, while they were never found in any of the swine wastewater samples. SAs and quinolones (QNs) were detected in all samples. Hierarchical cluster analysis of 16 surface water samples was applied to achieve the spatial distribution characteristics of antibiotics in the Jiulongjiang River. As a result, two categories were obviously obtained. Principal component analysis and redundancy analysis showed that TCs and SAs as well as their metabolites were the major antibiotics in Jiulongjiang River, and they mainly originated from swine wastewater, while the QNs, MLs, and β-Ls in the Jiulongjiang River came from WWTP effluent.

Atmospheric carbonaceous aerosols were sampled discontinuously from July 2006 to December 2009 at Nam Co Comprehensive Observation and Research Station (NCOS) in the central Tibetan Plateau (TP). The mean daily concentration of carbonaceous aerosols increased from 268 to 330 ng m(-3), and pollution episodes could significantly increase the mean level of carbonaceous aerosols in the total mass concentration. Organic carbon was the main component of carbonaceous aerosols at NCOS, and black carbon (BC) accounted for 5.8 %. Seven-day air masses backward trajectories calculated by the Hybrid Single-Particle Lagrangian Integrated Trajectory model and the aerosol optical depth distribution in the TP and South Asia both suggested that atmospheric pollutants emitted from Northern India and South Asia could penetrate into central TP by southwest winds. Due to the seasonal variations of emission sources and regional atmospheric conditions, calculated BC deposition flux in the nonmonsoon season was higher than that in the monsoon season. Increased BC concentration in snowpack in winter from 2007 to 2009 indicated that the atmospheric environment in central TP became more polluted and the influences from human activities have strengthened. Pollution episodes could significantly increase BC concentrations in the snowpack on a seasonal scale, which would furthermore affect the surface albedo.

This paper focuses on the evaluation of water quality variations in Hirfanlı Water Reservoir, which is one of the most important water resources in Turkey, through EO-1 (Earth Observing-1) Advanced Land Imager (ALI) multispectral data and real-time field sampling. The study was materialized in 20 different sampling points during the overpass of the EO-1 ALI sensor over the study area. A multi-linear regression technique was used to explore the relationships between radiometrically corrected EO-1 ALI image data and water quality parameters: chlorophyll a, turbidity, and suspended solids. The retrieved and verified results show that the measured and estimated values of water quality parameters are in good agreement (R ² > 0.93). The resulting thematic maps derived from EO-1 multispectral data for chlorophyll a, turbidity, and suspended solids show the spatial distribution of the water quality parameters. The results indicate that the reservoir has average nutrient values. Furthermore, chlorophyll a, turbidity, and suspended solids values increased at the upstream reservoir and shallow coast of the Hirfanlı Water Reservoir.