Chlordecone, an organochlorine insecticide, pollutes soils and contaminates crops and water resources and is biomagnified by food chains. As chlordecone is partly trapped in the soil, one possible alternative to decontamination may be to increase its containment in the soil, thereby reducing its diffusion into the environment. Containing the pesticide in the soil could be achieved by adding compost because the pollutant has an affinity for organic matter. We hypothesized that adding compost would also change soil porosity, as well as transport and containment of the pesticide. We measured the pore features and studied the nanoscale structure to assess the effect of adding compost on soil microstructure. We simulated changes in the transport properties (hydraulic conductivity and diffusion) associated with changes in porosity. During compost incubation, the clay microstructure collapsed due to capillary stresses. Simulated data showed that the hydraulic conductivity and diffusion coefficient were reduced by 95 and 70 % in the clay microstructure, respectively. Reduced transport properties affected pesticide mobility and thus helped reduce its transfer from the soil to water and to the crop. We propose that the containment effect is due not only to the high affinity of chlordecone for soil organic matter but also to a trapping mechanism in the soil porosity. (Résumé d'auteur)

Chlordecone, an organochlorine insecticide, pollutes soils and contaminates crops and water resources and is biomagnified by food chains. As chlordecone is partly trapped in the soil, one possible alternative to decontamination may be to increase its containment in the soil, thereby reducing its diffusion into the environment. Containing the pesticide in the soil could be achieved by adding compost because the pollutant has an affinity for organic matter. We hypothesized that adding compost would also change soil porosity, as well as transport and containment of the pesticide. We measured the pore features and studied the nanoscale structure to assess the effect of adding compost on soil microstructure. We simulated changes in the transport properties (hydraulic conductivity and diffusion) associated with changes in porosity. During compost incubation, the clay microstructure collapsed due to capillary stresses. Simulated data showed that the hydraulic conductivity and diffusion coefficient were reduced by 95 and 70 % in the clay microstructure, respectively. Reduced transport properties affected pesticide mobility and thus helped reduce its transfer from the soil to water and to the crop. We propose that the containment effect is due not only to the high affinity of chlordecone for soil organic matter but also to a trapping mechanism in the soil porosity.

Due to its high growth rate and biomass production, bamboo has recently been proven to be useful in wastewater treatment. Bamboo accumulates high silicon (Si) levels in its tissues, which may improve its development and tolerance to metal toxicity. This study investigates the effect of Si supplementation on bamboo growth and copper (Cu) sensitivity. An 8-month hydroponic culture of bamboo Gigantocloa sp. "Malay Dwarf " was performed. The bamboo plants were first submitted to a range of Si supplementation (0-1.5 mM). After 6 months, a potentially toxic Cu concentration of 1.5 ?M Cu2+ was added. Contrary to many studies on other plants, bamboo growth did not depend on Si levels even though it absorbed Si up to 218 mg g?1 in leaves. The absorption of Cu by bamboo plants was not altered by the Si supplementation; Cu accumulated mainly in roots (131 mg kg?1), but was also found in leaves (16.6 mg kg?1) and stems (9.8 mg kg?1). Copper addition did not induce any toxicity symptoms. The different Cu and Si absorption mechanisms may partially explain why Si did not influence Cu repartition and concentration in bamboo. Given the high biomass and its absorption capacity, bamboo could potentially tolerate and accumulate high Cu concentrations making this plant useful for wastewater treatment. (Résumé d'auteur)

Due to its high growth rate and biomass production, bamboo has recently been proven to be useful in wastewater treatment. Bamboo accumulates high silicon (Si) levels in its tissues, which may improve its development and tolerance to metal toxicity. This study investigates the effect of Si supplementation on bamboo growth and copper (Cu) sensitivity. An 8-month hydroponic culture of bamboo Gigantocloa sp. "Malay Dwarf " was performed. The bamboo plants were first submitted to a range of Si supplementation (0-1.5 mM). After 6 months, a potentially toxic Cu concentration of 1.5 μM Cu(2+) was added. Contrary to many studies on other plants, bamboo growth did not depend on Si levels even though it absorbed Si up to 218 mg g(-1) in leaves. The absorption of Cu by bamboo plants was not altered by the Si supplementation; Cu accumulated mainly in roots (131 mg kg(-1)), but was also found in leaves (16.6 mg kg(-1)) and stems (9.8 mg kg(-1)). Copper addition did not induce any toxicity symptoms. The different Cu and Si absorption mechanisms may partially explain why Si did not influence Cu repartition and concentration in bamboo. Given the high biomass and its absorption capacity, bamboo could potentially tolerate and accumulate high Cu concentrations making this plant useful for wastewater treatment.

Little is known about the exposure of aquatic biota to tire and road wear particles (TRWP) washed away from roads. Mussels were exposed for 7 days to model TRWP (m-TRWP), produced by milling tire tread particles with pure sand, and analyzed for 21 tire-related compounds by liquid chromatography-high resolution-mass spectrometry (LC-HRMS). Upon exposure to 0.5 g/L of m-TRWP, 15 compounds were determined from 944 μg/kg wet weight (diphenylguanidine, DPG) over 18 μg/kg for an oxidation product of N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6-PPDQ) to 0.6 μg/kg (4-hydroxydiphenyl amine). Transfer into mussels was highest for PTPD, DTPD and 6-PPDQ and orders of magnitude lower for 6-PPD. During 7 days depuration the concentration of all determined chemicals decreased to remaining concentrations between ~50 % (PTPD, DTPD) and 6 % (6-PPD). Suspect and non-target screening found 37 additional transformation products (TPs) of tire additives, many of which did not decrease in concentration during depuration, among them ten likely TPs of DPG, two of 6-PPD and PTPD and two of 1,2-dihydro-2,2,4-trimethylquinoline. A wide variety of chemicals is taken up by mussels upon exposure to m-TRWP and a wide range of TPs is formed, enabling the differentiation of biomarkers of exposure to TRWP and biomarkers of exposure to tire-associated chemicals. | publishedVersion

Little is known about the exposure of aquatic biota to tire and road wear particles (TRWP) washed away from roads. Mussels were exposed for 7 days to model TRWP (m-TRWP), produced by milling tire tread particles with pure sand, and analyzed for 21 tire-related compounds by liquid chromatography-high resolution-mass spectrometry (LC-HRMS). Upon exposure to 0.5 g/L of m-TRWP, 15 compounds were determined from 944 μg/kg wet weight (diphenylguanidine, DPG) over 18 μg/kg for an oxidation product of N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6-PPDQ) to 0.6 μg/kg (4-hydroxydiphenyl amine). Transfer into mussels was highest for PTPD, DTPD and 6-PPDQ and orders of magnitude lower for 6-PPD. During 7 days depuration the concentration of all determined chemicals decreased to remaining concentrations between ~50 % (PTPD, DTPD) and 6 % (6-PPD). Suspect and non-target screening found 37 additional transformation products (TPs) of tire additives, many of which did not decrease in concentration during depuration, among them ten likely TPs of DPG, two of 6-PPD and PTPD and two of 1,2-dihydro-2,2,4-trimethylquinoline. A wide variety of chemicals is taken up by mussels upon exposure to m-TRWP and a wide range of TPs is formed, enabling the differentiation of biomarkers of exposure to TRWP and biomarkers of exposure to tire-associated chemicals. | This study was performed in the ANDROMEDA project in the framework of the JPI Oceans Joint Action “Ecological Aspects of Microplastic”. We thank our cooperation partners in this project for fruitful discussion and collaboration. We gratefully acknowledge funding by the German Ministry for Education and Research (BMBF; FKz 03F0850A). The authors wish to thank the ProVIS Centre for Chemical Microscopy which is supported by European Regional Development Funds (EFRE) and the Helmholtz Association for providing access to the scanning electron microscope. Technical support by Petra Keil (UFZ) is gratefully acknowledged. We also want to thank the laboratory technicians of the ILVO Marine Analytical Lab and Aquaculture lab for technical support during the exposure experiment. | Peer reviewed

Seismic surveys are conducted worldwide to explore for oil and gas deposits and to map subsea formations. The airguns used in these surveys emit low-frequency sound waves. Studies on zooplankton responses to airguns report a range of effects, from none to substantial mortality. A field experiment was conducted to assess mortality and naupliar body length of the calanoid copepod Acartia tonsa when exposed to the discharge of two 40-inch airguns. Nauplii were placed in plastic bags and attached to a line at a depth of 6 m. For each treatment, three bags of nauplii were exposed to one of three treatments for 2.5 h: Airgun array discharge, a boat control, or a silent control. After exposure, nauplii were kept in filtered seawater in the laboratory without food. Immediate mortality in the nauplii was approximately 14% compared to less than 4% in the silent and boat control. Similarly, there was higher mortality in the airgun exposed nauplii up to six days after exposure compared to the control treatments. Nearly all of the airgun exposed nauplii were dead after four days, while >50% of the nauplii in the control treatments were alive at six days post-exposure. There was an interaction between treatment and time on naupliar body length, indicating lower growth in the nauplii exposed to the airgun discharge (growth rates after 4 days: 1.7, 5.4, and 6.1 μm d−1 in the airgun exposed, silent control, and boat control, respectively). These experiments indicate that the output of two small airguns affected mortality and growth of the naupliar stages of Acartia tonsa in close vicinity to the array. | publishedVersion | publishedVersion

Seismic surveys are conducted worldwide to explore for oil and gas deposits and to map subsea formations. The airguns used in these surveys emit low-frequency sound waves. Studies on zooplankton responses to airguns report a range of effects, from none to substantial mortality. A field experiment was conducted to assess mortality and naupliar body length of the calanoid copepod Acartia tonsa when exposed to the discharge of two 40-inch airguns. Nauplii were placed in plastic bags and attached to a line at a depth of 6 m. For each treatment, three bags of nauplii were exposed to one of three treatments for 2.5 h: Airgun array discharge, a boat control, or a silent control. After exposure, nauplii were kept in filtered seawater in the laboratory without food. Immediate mortality in the nauplii was approximately 14% compared to less than 4% in the silent and boat control. Similarly, there was higher mortality in the airgun exposed nauplii up to six days after exposure compared to the control treatments. Nearly all of the airgun exposed nauplii were dead after four days, while >50% of the nauplii in the control treatments were alive at six days post-exposure. There was an interaction between treatment and time on naupliar body length, indicating lower growth in the nauplii exposed to the airgun discharge (growth rates after 4 days: 1.7, 5.4, and 6.1 μm d−1 in the airgun exposed, silent control, and boat control, respectively). These experiments indicate that the output of two small airguns affected mortality and growth of the naupliar stages of Acartia tonsa in close vicinity to the array.

Comparative investigations of microplastic (MP) occurrence in the global ocean are often hampered by the application of different methods. In this study, the same sampling and analytical approach was applied during five different cruises to investigate MP covering a route from the East-Siberian Sea in the Arctic, through the Atlantic, and into the Antarctic Peninsula. A total of 121 subsurface water samples were collected using underway pump-through system on two different vessels. This approach allowed subsurface MP (100 μm–5 mm) to be evaluated in five regions of the World Ocean (Antarctic, Central Atlantic, North Atlantic, Barents Sea and Siberian Arctic) and to assess regional differences in MP characteristics. The average abundance of MP for whole studied area was 0.7 ± 0.6 items/m3 (ranging from 0 to 2.6 items/m3), with an equal average abundance for both fragments and fibers (0.34 items/m3). Although no statistical difference was found for MP abundance between the studied regions. Differences were found between the size, morphology, polymer types and weight concentrations. The Central Atlantic and Barents Sea appeared to have more MP in terms of weight concentration (7–7.5 μg/m3) than the North Atlantic and Siberian Arctic (0.6 μg/m3). A comparison of MP characteristics between the two Hemispheres appears to indicate that MP in the Northern Hemisphere mostly originate from terrestrial input, while offshore industries play an important role as a source of MP in the Southern Hemisphere. The waters of the Northern Hemisphere were found to be more polluted by fibers than those of the Southern Hemisphere. The results presented here suggest that fibers can be transported by air and water over long distances from the source, while distribution of fragments is limited mainly to the water mass where the source is located. | publishedVersion

Comparative investigations of microplastic (MP) occurrence in the global ocean are often hampered by the application of different methods. In this study, the same sampling and analytical approach was applied during five different cruises to investigate MP covering a route from the East-Siberian Sea in the Arctic, through the Atlantic, and into the Antarctic Peninsula. A total of 121 subsurface water samples were collected using underway pump-through system on two different vessels. This approach allowed subsurface MP (100 μm–5 mm) to be evaluated in five regions of the World Ocean (Antarctic, Central Atlantic, North Atlantic, Barents Sea and Siberian Arctic) and to assess regional differences in MP characteristics. The average abundance of MP for whole studied area was 0.7 ± 0.6 items/m³ (ranging from 0 to 2.6 items/m³), with an equal average abundance for both fragments and fibers (0.34 items/m³). Although no statistical difference was found for MP abundance between the studied regions. Differences were found between the size, morphology, polymer types and weight concentrations. The Central Atlantic and Barents Sea appeared to have more MP in terms of weight concentration (7–7.5 μg/m³) than the North Atlantic and Siberian Arctic (0.6 μg/m³). A comparison of MP characteristics between the two Hemispheres appears to indicate that MP in the Northern Hemisphere mostly originate from terrestrial input, while offshore industries play an important role as a source of MP in the Southern Hemisphere. The waters of the Northern Hemisphere were found to be more polluted by fibers than those of the Southern Hemisphere. The results presented here suggest that fibers can be transported by air and water over long distances from the source, while distribution of fragments is limited mainly to the water mass where the source is located.

Comparative investigations of microplastic (MP) occurrence in the global ocean are often hampered by the application of different methods. In this study, the same sampling and analytical approach was applied during five different cruises to investigate MP covering a route from the East-Siberian Sea in the Arctic, through the Atlantic, and into the Antarctic Peninsula. A total of 121 subsurface water samples were collected using underway pump-through system on two different vessels. This approach allowed subsurface MP (100 μm–5 mm) to be evaluated in five regions of the World Ocean (Antarctic, Central Atlantic, North Atlantic, Barents Sea and Siberian Arctic) and to assess regional differences in MP characteristics. The average abundance of MP for whole studied area was 0.7 ± 0.6 items/m3 (ranging from 0 to 2.6 items/m3), with an equal average abundance for both fragments and fibers (0.34 items/m3). Although no statistical difference was found for MP abundance between the studied regions. Differences were found between the size, morphology, polymer types and weight concentrations. The Central Atlantic and Barents Sea appeared to have more MP in terms of weight concentration (7–7.5 μg/m3) than the North Atlantic and Siberian Arctic (0.6 μg/m3). A comparison of MP characteristics between the two Hemispheres appears to indicate that MP in the Northern Hemisphere mostly originate from terrestrial input, while offshore industries play an important role as a source of MP in the Southern Hemisphere. The waters of the Northern Hemisphere were found to be more polluted by fibers than those of the Southern Hemisphere. The results presented here suggest that fibers can be transported by air and water over long distances from the source, while distribution of fragments is limited mainly to the water mass where the source is located. | publishedVersion