A monitoring program was carried out in autumn 2015 along the Mediterranean coast of Morocco, at sites including urban, village and remote/rural beaches. Artificial Polymer Materials (APM) represented 70.64% of all collected items and included plastic (16 categories), foamed plastic (3) and other APM materials (2). Plastic items represented the dominant debris with 5356 items, i.e. 94.53% of all APM debris, foamed plastics presented 191 items (i.e. 3.37%) and other APM summed 119 items, i.e. 2.1% of all APM. Urban areas presented 49.63% of all APM recollected items with cigarette butts representing 32% of total APM items. Village areas presented 40.43% of total APM recollected items with cigarette butts representing 14.1%. Remote and rural beaches recorded 9.94% of total APM items and no cigarette butts were observed. Despite the efforts of local administrations, which introduced litter bins and enforced mechanical and manual cleaning operations, debris were essentially related to beachgoers.

The spatial extent of human activities must be understood for consistent and proportionate regulation, and effective marine planning. Redundant offshore pipelines can be removed or left in situ, but data on the footprint of these options are not readily available. The extents of three North Sea in situ decommissioning scenarios are presented. Leaving pipelines in situ would occupy <0.01% (12.3 km2) of UK waters, and this was similar to, or smaller than, other regulated activities (e.g. aggregate extraction). Adding armouring to large pipelines occupied up to 95 km2, while creating fisheries exclusion zones occupied up to 1119 km2. Removal of pipelines >30″ would be required to regain 50% or more of the seabed currently occupied. At present, the technology to remove pipelines >16″ safely and cost-efficiently is untested for large-scale decommissioning projects. The summaries presented inform the debate over the significance of decommissioning, and the regional consequences of different options.

Steelmaking slag has been utilized in shore protection and to improve ocean environments of sea bottom sediments in semi-enclosed areas and coastal regions. This is achieved by reducing dissolved sulphide concentration. In this study, a numerical model is proposed and developed using a Eulerian-Lagrangian model coupled with an ocean circulation model to compute advection-diffusion of dissolved sulphides and fluid-particle interactions between ocean circulation and steelmaking slag. We applied the model to the Fukuyama inner harbour in the Seto Inland Sea and Tokyo Bay and compared our results with field data. The numerical results show good agreement with the field results. We demonstrate that steelmaking slag can control advection-diffusion with regard to concentration of hydrogen sulphide. The steelmaking slag could be a useful material in restoration of ocean environments at enclosed sea areas.

Biochemical and molecular responses were evaluated in oysters Crassostrea brasiliana collected from three oyster farms, at Guaratuba Bay, southern Brazil, forming a pollutant gradient: Farm 1 (reference site - farther from the urban area), Farm 2 (intermediate site) and Farm 3 (nearest to the urban area). Oxidative stress markers, DNA damage and transcript levels of CYP2AU1, CYP2-like1, CYP2-like2, SULT-like, GPx-like, SOD-like, CAT-like, GSTmicrosomal-like, GSTomega-like, FABP-like and ALAd-like genes were analyzed in the gills. The levels of polycyclic aromatic hydrocarbons, linear alkylbenzenes and polychlorinated biphenyls were also evaluated in the soft tissues of the oysters and in the sediment of the Farms. Higher GSTomega-like, CYP2AU1 and FABP-like transcript levels, GR and G6PDH activities and lipid peroxidation levels were observed in oysters from Farms 2 and 3, suggesting pollutant effects on oysters. Alterations in oxidative stress markers also suggest a response against a prooxidant condition in C. brasiliana due to pollutant effects.

There is increasing uncertainty of how marine ecosystems will respond to rising temperatures. While studies have focused on the impacts of warming on individual species, knowledge of how species interactions are likely to respond is scant. The strength of even simple two-species interactions is influenced by several interacting mechanisms, each potentially changing with temperature. We used controlled experiments to assess how plant-herbivore interactions respond to temperature for three structural dominant macrophytes in the Mediterranean and their principal sea urchin herbivore. Increasing temperature differentially influenced plant-specific growth, sea urchin growth and metabolism, consumption rates and herbivore preferences, but not movement behaviour. Evaluating these empirical observations against conceptual models of plant-herbivore performance, it appears likely that while the strength of herbivory may increase for the tested macroalga, for the two dominant seagrasses, the interaction strength may remain relatively unchanged or even weaken as temperatures rise. These results show a clear set of winners and losers in the warming Mediterranean as the complex factors driving species interactions change.

We investigated the aragonite saturation state (Ωarag) during all four seasons in a coastal region of southern Korea that receives considerable freshwater input. The surface Ωarag values were higher during productive seasons with enhanced freshwater influences, likely due to an increased net removal of dissolved inorganic carbon (DIC) from the water column (i.e., biological control). In addition, during the productive seasons, enhancement of Ωarag was observed with decreasing salinity within a linear mixing zone present between river-influenced surface and saltier bottom waters. DIC appeared to be effectively sequestered from the warmer, less salty surface water by downward flux of organic matter, but not significantly affected by the relatively DIC-rich, cooler and saltier bottom waters under strong stratification conditions during these seasons (i.e., physical control). Low phytoplankton productivity and seasonal breakdown of the stratification caused reduced saturation in other seasons and made the study area a weak sink for atmospheric CO2.

Plastic preproduction pellets are found in environmental samples all over the world and their presence is often linked to spills during production and transportation. To better understand how these pellets end up in the environment we assessed the release of plastic pellets from a polyethylene production site in a case study area on the Swedish west coast. The case study encompasses; field measurements to evaluate the level of pollution and pathways, models and drifters to investigate the potential spread and a revision of the legal framework and the company permits. This case study show that millions of pellets are released from the production site annually but also that there are national and international legal frameworks that if implemented could help prevent these spills. Bearing in mind the negative effects observed by plastic pollution there is an urgent need to increase the responsibility and accountability of these spills.

Most lost fishing gear is made of non-biodegradable plastics that may sink to the sea floor or drift around in currents. It may remain unnoticed until it shows up on coral reefs, beaches and in other coastal habitats. Stony corals have fragile skeletons and soft tissues that can easily become damaged when they get in contact with lost fishing gear. During a dive survey around Koh Tao, a small island in the Gulf of Thailand, the impact of lost fishing gear (nets, ropes, cages, lines) was studied on corals representing six different growth forms: branching, encrusting, foliaceous, free-living, laminar, and massive. Most gear (>95%) contained plastic. Besides absence of damage (ND), three categories of coral damage were assessed: fresh tissue loss (FTL), tissue loss with algal growth (TLAG), and fragmentation (FR). The position of the corals in relation to the fishing gear was recorded as either growing underneath (Un) or on top (On), whereas corals adjacent to the gear (Ad) were used as controls. Nets formed the dominant type of lost gear, followed by ropes, lines and cages, respectively. Branching corals were most commonly found in contact with the gear and also around it. Tubastraea micranthus was the most commonly encountered coral species, either Un, On, or Ad. Corals underneath gear showed most damage, which predominantly consisted of tissue loss. Fragmentation was less common than expected, which may be related to the low fragility of T. micranthus as dominant branching species. Even if nets serve as substrate for corals, it is recommended to remove them from reefs, where they form a major component of the plastic pollution and cause damage to corals and other reef organisms.

The recently developed modelling tool MERLIN-Expo was applied to support the exposure assessment of an aquatic food web to trace metals in a coastal environment. The exposure scenario, built on the data from Daliao River estuary in the Liaodong Bay (Bohai Sea, China), affected by long-term and large-scale industrial activities as well as rapid urbanization in Liao River watershed, represents an interesting case-study for ecological exposure modelling due to the availability of local data on metal concentrations in water and sediment. The bioaccumulation of selected trace metals in aquatic organisms was modelled and compared with field data from local aquatic organisms. Both model results and experimental data demonstrated that As, Cd, Cu, Ni, Pb and Zn, out of examined metals, were accumulated most abundantly by invertebrates and less by higher trophic level species. The body parts of the sampled animals with the highest measured concentration of metals were predominantly muscles, intestine and liver and fish skin in the case of Cr.The Morris and extended Fourier Analysis (EFAST) were used to account for variability in selected parameters of the bioaccumulation model. Food assimilation efficiency and slopes and intercepts of two sub-models for calculating metal specific BCFs (BCFmetal-exposure concentration) and fish weight (Weightfish-Lengthfish) were identified as the most influential parameters on ecological exposure to selected metals.

The Deepwater Horizon oil spill stimulated the release of marine snow made up of dead/living plankton/bacteria and their exopolymeric polysaccharide substances (EPS), termed marine oil snow (MOS), promoting rapid removal of oil from the water column into sediments near the well site. Mesocosm simulations showed that Macondo surrogate oil readily associates with the marine snow. Quantitative solid-state 13C NMR readily distinguishes this oil from naturally formed marine snow and reveals that adding the dispersant Corexit enhances the amount of oil associated with the MOS, thus contributing to rapid removal from the water column. Solvent extraction of MOS removes the oil-derived compounds for analysis by one and two-dimensional GC/MS and evaluation of potential transformations they undergo when associated with the EPS. The results reveal that the oil associated with EPS is subjected to rapid transformation, in a matter of days, presumably by bacteria and fungi associated with EPS.