The previous studies indicated that Tychonema-like strains from Lake Erhai could release geosmin so that the species was listed as the potential harmful cyanobacteria influencing the drinking water safety around Lake Erhai. But, the dynamics and biological information of this species were too limited. In this study, the polyphasic approach was used to reveal its biological characterization and the dynamics in Lake Erhai. The characters of trichomes, including filaments with solitary or bundle state, reddish-brown or blue-green color, planktonic habitat, and presence of keritomized content, were examined by the microscopic method. The 16S rDNA sequences of these strains were used for phylogenetic analysis and molecular identification. The strains were morphologically classified as Tychonema bourrellyi, and geosmin and β-ionone were identified as the major volatile substances using gas chromatography–mass spectrometry (GC-MS) analysis. No strains of T. bourrellyi were found to produce microcystin by the HPLC and mcy gene approaches. Cell numbers at 12 sampling sites in Lake Erhai were shown as an average of 3 × 10⁴ cells L⁻¹ in 2009 and 2010. The obvious peaks occurred in July and August each year. This was the first report on occurrence of T. bourrellyi from outside of Europe, and T. bourrellyi was also a newly recorded species in China. Such a result demonstrated that T. bourrellyi could distribute extending from cold waters in North Europe to the warm waters in subtropical regions. It was interesting to observe the coincidence of the occurrence of T. bourrellyi with slightly eutrophicated waters since Lake Erhai had been regarded as an early phase of eutrophicated lake.

The uptake of polybrominated diphenyl ethers (PBDEs) by carrot and lettuce was investigated. Degradation of PBDEs in soil in the absence of the plants was discarded. Different carrot (Nantesa and Chantenay) and lettuce (Batavia Golden Spring and Summer Queen) varieties were grown in fortified or contaminated compost-amended soil mixtures under greenhouse conditions. After plant harvesting, roots (core and peel) and leaves were analyzed separately for carrot, while for lettuce, leaves and hearts were analyzed together. The corresponding bioconcentration factors (BCFs) were calculated. In carrots, a concentration gradient of 2,2′,3,4,4′,5′-hexabromodiphenyl ether (BDE-138) became evident that decreased from the root peel via root core to the leaves. For decabromodiphenyl ether (BDE-209) at the low concentration level (7 and 20 ng g⁻¹), the leaves incorporated the highest concentration of the target substance. For lettuce, a decrease in the BCF value (from 0.24 to 0.02) was observed the higher the octanol–water partition coefficient, except in the case of BDE-183 (BCF = 0.51) and BDE-209 (BCF values from 0.41 to 0.74). Significant influence of the soils and crop varieties on the uptake could not be supported. Metabolic debromination, hydroxylation or methylation of the target PBDEs in the soil–plant system was not observed.

Numerous carbon dioxide mineralization (CM) processes have been proposed to overcome the slow rate of natural weathering of silicate minerals. Ten of these proposals are mentioned in this article. The proposals are described in terms of the four major areas relating to CM process design: pre-treatment, purification, carbonation, and reagent recycling operations. Any known specifics based on probable or representative operating and reaction conditions are listed, and basic analysis of the strengths and shortcomings associated with the individual process designs are given in this article. The processes typically employ physical or chemical pseudo-catalytic methods to enhance the rate of carbon dioxide mineralization; however, both methods have its own associated advantages and problems. To examine the feasibility of a CM process, three key aspects should be included in the evaluation criteria: energy use, operational considerations as well as product value and economics. Recommendations regarding the optimal level of emphasis and implementation of measures to control these aspects are given, and these will depend very much on the desired process objectives. Ultimately, a mix-and-match approach to process design might be required to provide viable and economic proposals for CM processes.

Biochar can potentially reduce fumigant emissions in agriculture. Dimethyl disulfide (DMDS) is an effective soil fumigant for controlling soil-borne pests. However, it is important to reduce DMDS emissions because the compound has an unpleasant and easily perceived sulfur odor. This study therefore aimed to determine the effects of two types of biochar amendments on DMDS bioactivity and emission, using bioassay methods and soil columns. The efficacy of DMDS for controlling root-knot nematode and Fusarium spp. was not reduced when the biochar used in this study was applied at a rate less than 2 and 0.5 % (on a weight basis), respectively. The biochar with high specific surface area (SSA 113 m⁻² g⁻¹) reduced the efficacy of DMDS against soil-borne pests more than the low SSA biochar (14 m⁻² g⁻¹). Increased doses of DMDS were able to offset decreases in the efficacy of DMDS in soils amended with biochars, except for high SSA biochar applied at a rate of 2 %. Biochar amendments applied to the soil surface at shallow depth can significantly reduce DMDS emission to the atmosphere. The results of this study will support decision-making about the practical use of biochar to reduce DMDS emissions.

China's Sloping Land Conversion Program (SLCP) was designed to restore perennial plant cover on sloping land in western China, in part to protect the Three Gorges Reservoir (TGR). In this study, we examined use of white mulberry (Morus alba L.) in the SLCP to protect water quality and conserve soil. We established nine runoff monitoring plots divided among three categories (vegetable farming, fallow control, and mulberry plantation) on a bank of the Liangtan River situated at the western margin of the TGR. The land had been used previously by farmers for growing vegetables. We found that soil loss and surface water runoff were lowest in the mulberry plots and highest in the vegetable plots. We used inductively coupled plasma atomic emission spectroscopy (ICP-AES) to assess the concentration of selected heavy metal pollution indicators (Zn, Hg, As, Ni, Pb, Cr, Cd, and Cu) in the monitoring plot soils at the beginning of the experiment in May 2009. The heavy metals were assessed again at the end of the experiment in October 2012, and we found that the concentrations of these pollutants had been reduced in all fallow and mulberry plots, and to the greatest extent in the mulberry plots. We found that levels of Hg, Pb, and Cu increased in the vegetable plots. For these reasons, we conclude that riparian mulberry plantations are useful for reducing rapid runoff of storm water, conserving soil, and sequestering heavy metal pollutants in the TGR region.

The bioaccessibilites of heavy metals in vegetables grown around a waste-incinerator site were estimated using the physiologically based extraction test (PBET) method, to assess potential health risk to the local consumers. The average gastric and intestinal bioaccessibilities of Cd, Cr, Cu, Ni, and Pb in vegetables varied within 3.2–9.4 and 0.8–5.3 %, 1.4–2.3 and 1.1–1.9 %, 25–46 and 13–26 %, 6.6–30 and 2.6–5.3 %, 11–29 and 7.1–23 %, respectively. Strong negative correlations were found between electrochemical potential (ΔE ₀) and bioaccessibility for leaf mustard samples (r ² = 0.857) and leaf lettuce samples (r ² = 0.696). In addition, softness index (σp) and electrochemical potential (ΔE ₀) exhibited a moderate but not significant relationship with bioaccessibilities on the basis of the multiple regression analysis (0.05 < p < 0.1). The total bioaccessible target hazard quotient (TBTHQ) of the five heavy metals was 2.5, with Pb being the major risk contributor. According to the TBTHQs of each group of vegetables, local consumers are experiencing adverse health effects by consuming most of the vegetables around waste-incinerator site.

Metalcasting involves having a molten metal poured in a hollow mould to produce metal objects. These moulds are generally made of sand and are chemically bonded, clay-bonded, or even unbounded. There are many binder systems used. Binders based on furfuryl resins constitute currently the highest fraction in the binders no-bake group. Moulding sand, after knocking out the cast, is partially reclaimed, and the remaining part, known as waste foundry sand is used or stored outside the foundry. In this case, the environment hazardous organic compounds and metals can be leached from the moulding sand, thus causing pollution of water and soil. Also during the casting moulds with molten metal, they emit pyrolysis gases containing many different compounds, often dangerous from the BTEX and PAH group, which has adverse impacts on the environment and workers. The article presents the results of research on the impact of the regenerate addition to the moulding sand matrix on emitted gases and the degree of threat to the environment due to leaching of hazardous components. Therefore, for the total assessment of the moulding sands harmfulness, it is necessary to perform investigations concerning the dangerous substances elution into the environment during their management and storage, as well as investigations concerning emissions of hazardous substances (especially from the BTEX and PAHs group) during moulds pouring, cooling, and casting knocking out. Both kinds of investigations indicated that reclaimed sand additions to moulding sands have significantly negative influence on the environment and working conditions.

Wastewaters from civil and industrial use, which contain high concentration of heavy metals, pose the problem for their correct disposal. They cannot be directly discharged in sewage systems, as metal ions represent a serious problem not only for human health but also for the environment. In this paper, the removal of nickel, cobalt, chromium, and zinc ions from synthetic liquid wastes was carried out, by using a micellar-enhanced ultrafiltration (MEUF) process; an ultrafiltration (UF) membrane (a monotubular ceramic of molecular weight cutoff 210 kDa) together with sodium dodecyl sulfate (SDS) as an anionic surfactant was used, in a lab-scale experimental device. The synthetic liquid contained 10-mg/L metal ions (Cr, Zn, Co, Ni), while SDS concentration varied from values above and below critical micellar concentration (CMC). The experiments were carried out at room temperature (25 °C). Results achieved showed that SDS was able to bind metal ions, resulting in a strong increase of rejection coefficient, which reached highest values in case of SDS concentration below CMC, unexpectedly.

Tea saponin (TS), a kind of biodegradable surfactant, was chosen to improve the accessible solubilization of pyrene and cadmium (Cd) in co-contaminated soils cultivated Lolium multiflorum. TS obviously improved the accessibility of pyrene and Cd for L. multiflorum to accelerate the process of accumulation and elimination of the pollutants. The chemical forms of Cd was transformed from Fe-Mn oxides and associated to carbonates fractions into exchangeable fractions by adding TS in single Cd and pyrene-Cd contaminated soils. Moreover, the chemical forms of pyrene were transformed from associated fraction into bioaccessible fraction by adding TS in pyrene and pyrene-Cd contaminated soils. In pyrene-Cd contaminated soil, the exchangeable fraction of Cd was hindered in the existence of pyrene, and bioaccessible fraction of pyrene was promoted by the cadmium. Besides, in the process of the pyrene degradation and Cd accumulation, the effect could be improved by the elongation of roots with adding TS, and the microorganism activity was stimulated by TS to accelerate the removal of pollutions. Therefore, Planting L. multiflorum combined with adding TS would be an effective method on the phytoremediation of organics and heavy metals co-contaminated soils.

For the purpose of clarifying the chemical nature of fly ashes, the raw fly ashes were collected from the stacks of 17 fixed sources consisting of 15 municipal waste incinerators, a metal melting factory, and a cement plant all of which are located in the western Japan from Nov. 2000 to Jan. 2007. The municipal waste incinerators were successfully classified into four groups in terms of the relative mass ratios between chloride, potassium, and sodium. Sodium, potassium, and calcium were found abundantly in fly ashes collected from all four types of municipal waste incinerators. The theoretical estimation of chlorine form suggested that the form of NaCI, KCl, MgCl, and CaCl₂ accounted for approximately 55 % of total chlorine in raw fly ash. Trace heavy metals (i.e., Zn, Mn, Pb, Cu, Cr, Ni, and V) were preferentially enriched in the ambient PM₂.₅ which was strongly influenced by regional stationary sources (including municipal waste incinerators). The water-soluble OC to TC fraction in the fly ashes of municipal waste incinerator, metal furnace, and cement plant was estimated as 56.8, 79.0, and 89.6 %, respectively.