Objectives:To compare water quality parameters in the vicinity of Gas Flaring Area of Ebocha-Obrikom of Rivers State with that of the recommended standards.Methods:The research utilized standard analytical procedures. All sampling, conservation, transportation and analysis followed standard procedures described in APHA (2012). All the samples collected were transported to the laboratory through keeping in an icebox to prevent degradation of the organic substances.Results:Result depicts that Turbidity, DO, BOD, COD, TSS, Magnesium, Iron, Cadmium, Lead, Chromium, and Nickel exceeded the desirable limit meant for drinking purpose as well as could potentially pose threats toward human society. Hence, remain unsuitable for drinking, as the inhabitants were more vulnerable for their total lifetime period of exposure through continuous consumption of unsuitable drinking water.Conclusion:It is recommended that the local government environmental health officers and other regulatory agencies frequently monitor the levels of these pollutants within the area and also ensure strict adherence to guidelines to ensure a healthy environment. As exposure to the above stated parameters can have a remarkable impact on human health living in the vicinity of the gas flaring area by drinking water around the study area; thus, groundwater needs to treated before using for household purpose or drinking. Thus, this study would help in decision making for stakeholders and relevant authorities in the execution of reasonable groundwater management strategies and remediation plans in the area to protect public and environmental health.

Preparation of an efficient hybrid structure photocatalyst for photocatalytic decomposition has been considered a great option to develop renewable technologies for environmental remediation. Herein, ternary magnetic Fe3O4/GQD/g-C3N4 nanocomposite (FGC) was prepared using the ball mill method. Binary nanocomposites Fe3O4/g-C3N4 (F/CN) and GQD/g-C3N4 (G/CN) were prepared to compare photocatalytic activity with FGC. The performance of photocatalysts for degradation of rhodamine B (RhB) was studied. EDX results showed that Fe3O4, GQD and g-C3N4 nanoparticles (NPs) are uniformly distributed in the FGC. The FGC nanocomposite shows superparamagnetic behaviour with a saturation magnetization of 12 emu. g-1, which makes it favourable compound for magnetic separation procedure. Photocatalytic activity of FGC (100%) was much higher than those of the G/CN (88%) and F/CN (77%) photocatalysts. The superior activity of FGC compared to binary composites was attributed to broader absorption in the visible light band and greater suppression of electron-hole recombination. The photocatalytic degradation of RhB using FGC was consistent with pseudo-first-order kinetics. The reusability of FGC was examined for four runs and no noticeable decrease was observed with the same irradiation time for each run. Finally, it can be argued that FGC photocatalyst can be an efficient semiconductor for the degradation of organic dyes from wastewater.

The biotoxins can enter the marine food chain, and, accordingly, seafood consumers are also at risk of ingesting toxins from contaminated aquatic animals. Hormozgan Province in the north of Persian Gulf is an area with high industrial and urbanization rising rate. In the present work, the aim was to identify the okadaic acid and domoic acid producers in the coastal waters and to investigate on their accumulated concentrations in edible bivalves in order to assess the consumer’s health risk. Water samples were collected during winter 2018 and summer 2019 from one blank and four stations facing industrial and municipal effluents. Four species of edible bivalves were collected from coastal lines of Hormozgan province, at the lowest tide time. The concentrations of toxins were determined by indirect competitive ELISA method. Pseudonitzschia delicatissima, Nitzschia punges and Nitzschia seriata in the production of domoic acid and Dinophysis caudate, Prorocentrum Lima and Ceratium tripos in the production of okadaic acid were identified. The okadaic acid concentrations ranged from 59.8 ± 2.38 to 121.96 ± 28.25 µg/kg, ranging from 0.85 to 83.59 ± 38.72 for Domoic acid. Among the studied bivalves, Pinctada radiate contained the maximum concentrations of measured toxins. For the first time at Hormozgan Province, the consumption guidelines for domoic and okadaic acid were calculated. The human health risk assessment showed that at present time, the algal consumers from Hormozgan province are not at risk of domoic and okadaic acid toxins.

Pars special economic energy zone (PSEEZ) in Iran is the second largest energy zone in the world with more than 60,000 operational and non-operational personnel. Considering the nature of the activities being done in PSEEZ, it is rational to expect that a wide range of hazardous materials be present in the air composition of this area. It is shown in this research that Benzene-Toluene-Ethylbenzene-Xylene (BTEX) are the most challenging in PSEEZ and benzene concentration violates the standards in all sampling points. The study area is divided into three subzones of gas refineries, petrochemical complexes and non-operational areas. In the gas refineries, benzene concentration is recorded to be 480 times higher than the standard for exposure limit. The concentration of benzene in petrochemical complexes is also about 160 times higher than the standard limit. Considering the vicinity of the petrochemical complexes the cumulative impacts of BTEX will also worsen the situation regarding BTEX cancer risk. In non-operational areas, benzene concentration reaches 40 times higher than the standard limit which is a serious health challenge. Comparing the data of BTEX distribution with AQI proves that AQI solely is not an appropriate index for assessing the air quality in PSEEZ and defining local indices for air quality assessment with taking hazardous chemicals such as BTEX into account. Moreover, some other pollutants such as heavy metals and H2S are detected in the air quality in significant amounts which raise the need to a reconsideration in location of unprotected non-operational personnel.

Mercury pollution is an issue of global concern. In Colombia, the use of contaminated water for food crop irrigation and artisanal mining contributes to mercury pollution in soil, affecting food production and restoration of disturbed areas. Mycorrhizal fungi are symbionts that provide benefits to plants including resistance to heavy metals, but fungal effects on germination remain to be fully described. This study tested the effect of mercury and mycorrhizal fungi on Lactuca sativa seed germination. A 2x5 completely randomized factorial experiment was developed to assess the effect of five HgCl2 polluted treatments, two mycorrhizal treatments (i.e., with inoculum, without inoculum), and the interaction of both factors on seed germination, seedling root colonization, pH, and final water content. In samples with no mercury pollution, mycorrhizal fungi had an inhibitory effect on seed germination. Likewise, the effect of mercury on seed germination is significantly inhibitory. However, pots inoculated with arbuscular mycorrhizal fungi showed constant germination probabilities, independently of mercury concentration. According to the best model determined for the data, a key step in the mitigation of mercury toxicity in seed germination is to prevent substrate pH changes. The environmental conditions of the experiment contributed to densely activate populated biomass of inoculum, which promoted root invasion from various points. Overall, the presence of mycorrhizal fungi in seedbeds could lead to a reduced number of plant individuals. However, the use of fungal inoculum in polluted environments, highly contributes to plant establishment, which is relevant in further vegetable cultivations growing in soil polluted areas.

Lignin rich solid residues after saccharification during the production of ethanol from lignocellulosic substrates are major concern during past times. These solid residues left after the saccharification of Coir pith and Bit fiber waste are pyrolysed at 350 oC to yield biochar, which has been characterized and its potential for removal of Malachite Green, a dye present in the effluents from coir product manufacturing units are studied. FTIR and XRD spectra revealed the diverse functional groups present on the surface of biochar. SEM images showed the porous structure of the biochar. A maximum dye removal efficiency of 99.5% was achieved using Coir Pith Biochar (1 %) within 24 hours of treatment at a dye concentration of 100 mg/l. The removal efficiency was 99.4 % using Bit Fiber Biochar (0.8 %) in the same treatment period. The efficiency of removal was enhanced on adjusting the pH to 4 at which the dye removal of 99.6 % and 99.7 % was achieved using Bit fiber biochar and Coir pith biochar respectively. The residence time was significantly reduced to 2 and 4 hours respectively for bit fiber and coir pith biochar at pH 4 and hence the produced biochars are cost effective adsorbents for removal of dyeing effluents in wastewater. The adsorption fits into pseudo-second order kinetics and is well described by langmuir isotherm model. This would also facilitate the sustainable use of spent solid substrates left after lignocellulosic ethanol production in a more economical way.

Solar disinfection is becoming increasingly popular around the world for eliminating pathogens present in wastewater. The goals of this study were to identify the significant variables and to maximize the log reduction values (LRV) of total coliforms present in treated urban wastewater using solar disinfection. To achieve the goals, a 23 full factorial design of experiments and response surface methodology were used. Solar disinfection was carried out in an open-air batch reactor and in a solar batch reactor. The three variables considered were solar irradiation, volume of sample and exposure time at two markedly different levels: solar irradiation (1100 Wh/m2 and 1700 Wh/m2), volume of sample (0.2 L and 2L), and exposure time (0.5 h and 3 h). When compared to other variables, exposure time was the most significant factor in the analysis of variance (ANOVA) study for both the reactor conditions. The regression equation developed for a solar reactor does not adequately explain the variability of the experimental data when compared to the regression equation developed for an open-air reactor. According to the response optimizer, the optimum values of the factors for solar disinfection using a solar reactor to achieve an LRV of 2 for 0.25 L of sample volume are 1700 Wh/m2 solar irradiation and 2.97 hours of exposure time. With an open-air reactor, 0.2 L of sample must be exposed to 1700 Wh/m2 of solar irradiation for 3 hours to achieve LRV of 2.

The optimization of nickel ion (Ni2+) removal in aqueous solutions with various factors (initial Ni concentration, solution pH, adsorbent dosage, contact time), as affected by raw cow bone (RBO) and its biochar (bone char: BC; produced by pyrolysis processes at 500 °C and a residence time of 4 hours) as adsorbents was investigated by a three-level Box–Behnken model (BBM) under response surface methodology (RSM). A total of 29 experimental runs were set for each adsorbent, and the experimental data were fitted to the empirical model. To understand the Ni2+ adsorption processes better, the properties of RBO and BC were characterized using Fe-SEM, FT-IR, BET, XRD, and CHNS elemental analysis techniques. The BC characteristics showed that pyrolysis increased the specific surface area (by 100 times) and phosphate functional groups, but decreased the carbonate functional groups, and yielded a more irregular and rougher morphological surface compared to RBO. Based on BC's superior ion exchange mechanisms and physical electrostatic adsorption compared to RBO, the removal efficiency of Ni2+ by BC was higher in aqueous solutions. The numerical optimization of BBM revealed that the optimum removal by BC (82.56%) was obtained at an initial Ni2+ concentration of 30.79 mg L−1, pH of 6.99, adsorbent dose of 4.87 g L−1, and contact time of 57.82 min, with the desirability of "1". BC can be effectively used for Ni removal from Ni-contaminated aqueous solutions; still, the application of modification methods (e.g., physical and chemical activation) may be necessary to help remove more Ni2+ by BC.

Melanoidin is the hazardous dark brown byproduct generated during palm oil extraction in the crude palm oil industry. In this study, the laccase-producing consortium W3 (Bacillus licheniformis and Bacillus subtilis) was used to degrade melanoidin and decolorize palm oil mill effluent (POME). The microbial fuel cell (MFC) has been applied for enhancing decolorization and generation of electrical energy as a byproduct. The results displayed the maximal melanoidin removal of 95.20±0.10% was gained when the consortium W3 was added into the synthetic wastewater. While the maximal decolorization of 75.10±0.12% and 73.91±0.23% were gained from the sterile POME and raw POME respectively without chemical addition. Moreover, the power output of 2.13±0.05 W/m3 or 0.27±0.01 W/m2 was achieved from the POME-fed MFC with W3. This study gained new knowledge of using the laccase-producing bacterial consortium integrated with MFC for melanoidin removal from the POME and generation of electrical power as an alternative energy source.

Activated carbon is known an as appropriate adsorbent due to its high adsorption capacity for most pollutants, especially heavy metals. In the present study, activated carbon was synthesized from orange wood by employing the chemical activation method. Additionally, cysteine amino acid was used to modify the activated carbon surface, leading to an enhancement in adsorption ability because of having a nitrogen group. Based on the results, the adsorption capacity of the modified activated carbon was obtained at 120 mg g-1 adsorbent. The parameters affecting adsorption such as the amount of used adsorbent, as well as solution pH, primary concentration, and contact time were optimized, followed by performing the adsorption process under optimal conditions. The optimal adsorption conditions included the pH of 6, contact time of 60 min, adsorbent amount of 50 mg, and primary cadmium concentration of 80 ppm. Further, kinetic and thermodynamic parameters were assessed and optimized. The results of which represented the best fit between adsorption with Langmuir isotherm and the pseudo-second-order kinetic model. The results represented that the quasi-second-order model with a higher regression coefficient (R2 = 0.97) described the experimental data better than the quasi-first-order one (R2 = 0.83). The adherence of adsorption kinetics to the pseudo-second-order model suggested a chemical interaction as the rate-determining step. Regarding adsorption thermodynamics, the effect of temperature was examined on adsorption by using Van't Hoff's equations, which reflect the endothermicity of the process.