Organic matter (OM) plays a key role in microbial response to soil metal contamination, yet little is known about how the composition of the OM affects this response in Mediterranean calcareous agricultural soils. A set of Mediterranean soils, with different contents and compositions of OM and carbonate and fine mineral fractions, was spiked with a mixture of Cd, Cu, Pb, and Zn and incubated for 12 months for aging. Microbial (Biolog Ecoplates) and enzyme activities (dehydrogenase, DHA; β-galactosidase, BGAL; phosphatase, PHOS; and urease, URE) were assessed and related to metal availability and soil physicochemical parameters. All enzyme activities decreased significantly with metal contamination: 36–68 % (DHA), 24–85 % (BGAL), 22–72 % (PHOS), and 14–84 % (URE) inhibitions. Similarly, catabolic activity was negatively affected, especially phenol catabolism (∼86 % compared to 25–55 % inhibition for the rest of the substrates). Catabolic and DHA activities were negatively correlated with ethylenediaminetetraacetic acid (EDTA)-extractable Cd and Pb, but positively with CaCl₂, NaNO₃, and DTPA-extractable Cu and Zn. Soluble OM (water- and hot-water-soluble organic C) was positively related to enzyme and catabolic activities. Recalcitrant OM and fine mineral fractions were positively related to BGAL and PHOS. Conversely, catabolic activity was negatively related to clay and positively to silt and labile OM. Results indicate that the microbial response to metal contamination is highly affected by texture and OM composition.

Seasonal variations in response of spinach to elevated ultraviolet-B (UV-B) during summer and winter were assessed with respect to growth, biomass, yield, NPK uptake and NPK use efficiencies at varying NPK levels. The nutrient amendments were recommended NPK (RNPK) and 1.5 times recommended NPK (1.5 RNPK). Season significantly affected the measured parameters except the number of leaves. Under ambient UV-B, the growth performance of summer spinach was better in both the NPK levels, higher being at 1.5 RNPK leading to higher nutrient uptake. However, more reduction in biomass under elevated UV-B in 1.5 RNPK was recorded during summer, while during winter in RNPK. Reduction in biomass under elevated UV-B was accompanied by the modification in its partitioning with more biomass allocation to root during summer compared to winter at both the NPK levels. NPK uptake was higher in summer, while NPK use efficiencies were higher during winter. At higher than recommended NPK level, better NPK use efficiencies were displayed during both the seasons. Increased NPK supply during winter enabled spinach to capitalize light more efficiently and hence increased biomass accumulation. Strategies for surviving elevated UV-B in winter differ from those that provided protection from the same stress when it occurs in summer.

Novel magnetic carbonaceous bio-char was hydrothermal prepared from microalgae under different loadings of iron and its structures and surface chemistry were characterized with Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and nitrogen adsorption-desorption isotherm (BET). The morphology of bio-char changed from sheet to particle as iron loading increased and its surface area also increased. When 3.0 g of dried microalgae and 6.0 mmol iron salt ((NH₄)₂SO₄·FeSO₄·6H₂O) were mixed and treated, the obtained bio-char possessing the highest amount of oxygen-containing functional groups resulted in the best adsorption performance on tetracycline (TC). This adsorption process was fitted to Langmuir adsorption isotherm and the maximum adsorption capacity was 95.86 mg/g, which is higher than other bio-char reported. The iron loading contributed to the higher adsorption capacity of bio-char, which may be due to three factors, the high surface area, more hydrogen bonding, and bridging effects of the structural Fe for TC. Our data suggest that bio-char may have more important role in stabilization of pollutants in the environment.

Candle composition is expected to influence the air pollutants emissions, possibly leading to important differences in the emissions of volatile organic compounds and polycyclic aromatic hydrocarbons. In this regard, the purity of the raw materials and additives used can play a key role. Consequently, in this work emission factors for some polycyclic aromatic hydrocarbons, aromatic species, short-chain aldehydes and particulate matter have been determined for container candles constituted by different paraffin waxes burning in a test chamber. It has been found that wax quality strongly influences the air pollutant emissions. These results could be used, at least at a first glance, to foresee the expected pollutant concentration in a given indoor environment with respect to health safety standards, while the test chamber used for performing the reported results could be useful to estimate the emission factors of any other candle in an easy-to-build standardised environment.

In this study, activated carbon was prepared from waste tire by KOH chemical activation. The pore properties including the BET surface area, pore volume, pore size distribution, and average pore diameter were characterized. BET surface area of the activated carbon was determined as 558 m²/g. The adsorption of uranium ions from the aqueous solution using this activated carbon has been investigated. Various physico-chemical parameters such as pH, initial metal ion concentration, and adsorbent dosage level and equilibrium contact time were studied by a batch method. The optimum pH for adsorption was found to be 3. The removal efficiency has also been determined for the adsorption system as a function of initial concentration. The experimental results were fitted to Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) isotherm models. A comparison of best-fitting was performed using the coefficient of correlation and the Langmuir isotherm was found to well represent the measured sorption data. According to the evaluation using the Langmuir equation, the saturated monolayer sorption capacity of uranium ions onto waste tire activated carbon was 158.73 mg/g. The thermodynamic equilibrium constant and the Gibbs free energy were determined and results indicated the spontaneous nature of the adsorption process. Kinetics data were best described by pseudo-second-order model.

The reasons why some cultivars of hot pepper (Capsicum annuum L.) accumulate low levels of Cd are poorly understood. We aimed to compare the characteristics of Cd uptake and translocation in low-Cd and high-Cd hot pepper cultivars by determining the subcellular locations and chemical forms of Cd, and its distribution among different plant organs. We conducted a hydroponic experiment to investigate the subcellular distribution and chemical forms of Cd in roots, stems, and leaves of a low-Cd (Yeshengchaotianjiao, YCT) and a high-Cd cultivar (Jinfuzaohuangjiao, JFZ). The results showed that the concentrations of Cd in almost all subcellular fractions of roots, and in all chemical forms in roots, were higher in YCT than in JFZ. Compared with YCT, JFZ had higher Cd concentrations in almost all subcellular fractions of stems and leaves, and higher Cd concentrations in almost all chemical forms in stems and leaves. Additionally, YCT had significantly higher total Cd accumulation but a lower Cd translocation rate compared with JFZ. In general, the results presented in this study revealed that root-to-shoot Cd translocation via the xylem is the key physiological processes determining the Cd accumulation level in stems and leaves of hot pepper plants. Immobilization of Cd by the cell walls of different organs is important in Cd detoxification and limiting the symplastic movement of Cd.

Fires are becoming more violent and frequent resulting in major economic losses and long-lasting effects on communities and ecosystems; thus, efficient fire monitoring is becoming a necessity. A novel triple multi-sensor approach was developed for monitoring and studying the burning of dry forest fuel in an open field scheduled experiment; chemical, optical, and acoustical sensors were combined to record the fire spread. The results of this integrated field campaign for real-time monitoring of the fire event are presented and discussed. Chemical analysis, despite its limitations, corresponded to the burning process with a minor time delay. Nevertheless, the evolution profile of CO₂, CO, NO, and O₂ were detected and monitored. The chemical monitoring of smoke components enabled the observing of the different fire phases (flaming, smoldering) based on the emissions identified in each phase. The analysis of fire acoustical signals presented accurate and timely response to the fire event. In the same content, the use of a thermographic camera, for monitoring the biomass burning, was also considerable (both profiles of the intensities of average gray and red component greater than 230) and presented similar promising potentials to audio results. Further work is needed towards integrating sensors signals for automation purposes leading to potential applications in real situations.

Influence of different parameters on biosurfactant (BS) activity was carried out on strains that were isolated from the polychaetes Megalomma claparedei, Sabella spallanzanii and Branchiomma luctuosum and additional 30 strains that were previously identified as potential BS producers from crude oil enrichments of the same polychaete specimens. The selection of BS-producing strains from polychaete natural samples was carried out by using standard screening tests. The BS activity by each isolate was evaluated for the effect of salinity and temperature on emulsion production and surface tension reduction, during incubation in mineral medium supplemented with tetradecane or diesel oil. All isolates showed a similar time course of BS activity, and the latter was more influenced by salinity rather than temperature. Some of the BS producers belonged to genera that have not (i.e. Citricoccus, Cellulophaga, Tenacibaculum and Maribacter) or have poorly been (Psychrobacter, Vibrio, and Pseudoalteromonas) reported as able to produce BSs. This is remarkable as some of them have previously been detected in hydrocarbon-enriched samples. Results confirm that filter-feeding polychaetes are an efficient source for the isolation of BS producers.

ortho-Nitrochlorobenzene (o-NCB) in soil poses significant health risks to human because of its persistence and high toxicity. The removal of o-NCB by both zero-valent iron (ZVI) and chemical oxidation (persulfate) was investigated by batch experiments. The o-NCB removal rate increases significantly from 15.1 to 97.3 % with an increase of iron dosage from 0.1 to 1.0 mmol g⁻¹. The o-NCB removal rate increases with the decrease of the initial solution pH, and a removal efficiency of 90.3 % is obtained at an initial pH value of 6.8 in this combined system. It is found that temperature and soil moisture could also increase the o-NCB removal rate. The o-NCB degradation rate increases from 83.9 to 96.2 % and from 41.5 to 82.4 % with an increase of temperature (15 to 35 °C) and soil moisture (0.25 to 1.50 mL g⁻¹), respectively. Compared to the persulfate oxidation system and ZVI system, the persulfate–iron system shows high o-NCB removal capacity. o-NCB removal rates of 41.5 and 62.4 % are obtained in both the persulfate oxidation system and the ZVI system, while the removal rate of o-NCB is 90.3 % in the persulfate–iron system.