The quantification of oxygen release by plants in different stages of wetland plant life cycle was made in this study. Results obtained from 1 year measurement in subsurface wetland microcosms demonstrated that oxygen release from Phragmites australis varied from 108.89 to 404.44 mg O₂/m²/d during the different periods from budding to dormancy. Plant species, substrate types, and culture solutions had a significant effect on the capacity of oxygen release of wetland plants. Oxygen supply by wetland plants was estimated to potentially support a removal of 300.37 mg COD/m²/d or 55.87 mg NH₄-N/m²/d. According to oxygen balance analysis, oxygen release by plants could provide 0.43–1.12 % of biochemical oxygen demand in typical subsurface-flow constructed wetlands (CWs). This demonstrates that oxygen release of plants may be a potential source for pollutants removal especially in low-loaded CWs. The results make it possible to quantify the role of plants in wastewater purification.

Several decades after the closure of the Ingurtosu mine (SW Sardinia), a variety of seasonal Zn biomineralizations occurs. In this work, waters, microbial consortia, and seasonal precipitates from the Naracauli stream were sampled to investigate chemical composition of stream waters and biominerals, and microbial strain identity. Molecular and morphological analysis revealed that activity of dominant cyanobacterium Leptolyngbya frigida results in precipitation of Zn silicate. The activity of the cyanobacterium was associated to other bacteria and many kind of diatoms, such as Halamphora subsalina and Encyonopsis microcephala, which are trapped in the process of biomineral growth. In this work, the precipitation process is shown to be the result of many different parameters such as hydrologic regime, microbial community adaptation, and biological mediation. It results in a decrease of dissolved Zn in the stream water, and is a potential tool for Zn pollution abatement.

A former open pit where black shale (alum shale) was excavated during 1942–1965 has been water filled since 1966. The water chemistry was dominated by calcium and sulphate and had a pH of 3.2–3.4 until 1997–1998, when pH was gradually increasing. This was due to the intrusion of leachates from alkaline cement waste deposited close to the lake. A stable pH of around 7.5 was obtained after 6–7 years. The chemistry of the pit lake has changed due to the neutralisation. Concentrations of some dissolved metals, notably zinc and nickel, have gone down, as a result of adsorption/co-precipitation on solid phases (most likely iron and aluminium hydroxides), while other metals, notably uranium and molybdenum, are present at elevated levels. Uranium concentration is reaching a minimum of around pH 6.5 and is increasing at higher pH, which may indicate a formation of neutral and anionic uranyl carbonate species at high pH (and total carbonate levels around 1 mM). Weathering of the water-exposed shale is still in progress.

The biodegradation process of lignin by Penicillium simplicissimum was studied to reveal the lignin biodegradation mechanisms. The biodegradation products of lignin were detected using Fourier transform infrared spectroscopy (FTIR), UV–Vis spectrophotometer, different scanning calorimeter (DSC), and stereoscopic microscope. The analysis of FTIR spectrum showed the cleavage of various ether linkages (1,365 and 1,110 cm⁻¹), oxidation, and demethylation (2,847 cm⁻¹) by comparing the different peak values in the corresponding curve of each sample. Moreover, the differences (Tₘand ΔHₘvalues) between the DSC curves indirectly verified the FTIR analysis of biodegradation process. In addition, the effects of adding hydrogen peroxide (H₂O₂) to lignin biodegradation process were analyzed, which indicated that H₂O₂could accelerate the secretion of the MnP and LiP and improve the enzymes activity. What is more, lignin peroxidase and manganese peroxidase catalyzed the lignin degradation effectively only when H₂O₂was presented.

Ecotoxicological studies have shown that nanosilver is among the most toxic nanomaterials to aquatic organisms. However, research has so far focused on the determination of acute effects. Combined effects of nanosilver with other substances have not yet been studied in aquatic organisms. The present study aimed to investigate the chronic toxicity of nanosilver as well as the potential of nanosilver to influence the effects of co-occurring substances on the freshwater mudsnail Potamopyrgus antipodarum. In 28-day chronic toxicity experiments, the effects of nanosilver on the reproduction of P. antipodarum were assessed. In order to evaluate the influence of nanosilver on other substances, 17α-ethinylestradiol (EE₂) was chosen as model compound due to the well-characterized effects on P. antipodarum. In addition to effects on reproduction, exposure to nanosilver and EE₂was monitored by determining the expression of estrogen-responsive transcripts (estrogen receptor and vitellogenin encoding genes). Exposure to nanosilver decreased the reproduction of P. antipodarum (EC₁₀: 5.57 μg l⁻¹; EC₅₀: 15.0 μg l⁻¹). Exposure to EE₂significantly stimulated the embryo production at 25 ng l⁻¹. The presence of nanosilver led to increased EE₂effects at EE₂concentrations that had no influence on reproduction when applied in absence of nanosilver. In contrast, combined exposure to nanosilver decreased EE₂effects at concentrations that stimulated reproduction and the expression of estrogen responsive genes when applied in the absence of nanosilver. This is the first study demonstrating an influence of nanosilver on the effects of co-contaminants on aquatic organisms. The study further highlights the need for chronic experiments to properly assess environmental risks of nanosilver and their effects on co-occurring contaminants.

To document the toxicity of copper and nickel in binary mixtures, freshwater amphipods Gammarus pulex were exposed to the metals given independently or as mixtures. Toxicity to Cu alone was relatively high: 96-h LC₁₀and LC₅₀were found at 91 and 196 μg L⁻¹, respectively. Toxicity to Ni alone was very low, with 96-h LC₁₀and LC₅₀of 44,900 and 79,200 μg L⁻¹, respectively. Mixture toxicities were calculated from single toxicity data using conventional models. Modeled toxicity was then compared with the measured toxicity of the binary mixture. Two kinds of mixtures were tested. Type I mixtures were designed as combinations of Cu and Ni given at the same effect concentrations, when taken independently, to identify possible interactions between copper and nickel. In type II mixtures, Cu concentrations varied from 0 to 600 μg L⁻¹while the nickel concentration was kept constant at 500 μg L⁻¹to mimic conditions of industrial wastewater discharges. Ni and Cu showed synergic effects in type I mixtures while type II mixtures revealed antagonistic effects. Low doses of Ni reduced Cu toxicity towards G. pulex. These results show that even for simple binary mixtures of contaminants with known chemistry and toxicity, unexpected interactions between the contaminants may occur. This reduces the reliability of conventional additivity models.

The objective of this study was to investigate the impact of exogenous urea nitrogen on ammonia-oxidizing bacteria (AOB) and other soil bacterial communities in soil bioaugmented for simazine remediation. The previously isolated simazine-degrading Arthrobacter sp. strain SD1 was used to degrade the herbicide. The effect of urea on the simazine degradation capacity of the soil bioaugmented with Arthrobacter strain SD1 was assessed using quantitative PCR targeting the s-triazine-degrading trzN and atzC genes. Structures of bacterial and AOB communities were characterized using terminal restriction fragment length polymorphism. Urea fertilizer could affect simazine biodegradation and decreased the proportion of its trzN and atzC genes in soil augmented with Arthrobacter strain SD1. Bioaugmentation process could significantly alter the structures of both bacterial and AOB communities, which were strongly affected by urea amendment, depending on the dosage. This study could provide some new insights towards s-triazine bioremediation and microbial ecology in a bioaugmented system. However, further studies are necessary in order to elucidate the impact of different types and levels of nitrogen sources on s-triazine-degraders and bacterial and AOB communities in bioaugmented soil.

Low solubility of certain hydrophobic soil contaminants limits remediation process. Surface-active compounds can improve the solubility and removal of hydrophobic compounds from contaminated soils and, consequently, their biodegradation. Hence, this paper aims to study desorption efficiency of oil from soil of SPB1 lipopeptide biosurfactant. The effect of different physicochemical parameters on desorption potency was assessed. Taguchi experimental design method was applied in order to enhance the desorption capacity and establish the best washing parameters. Mobilization potency was compared to those of chemical surfactants under the newly defined conditions. Better desorption capacity was obtained using 0.1 % biosurfacatnt solution and the mobilization potency shows great tolerance to acidic and alkaline pH values and salinity. Results show an optimum value of oil removal from diesel-contaminated soil of about 87 %. The optimum washing conditions for surfactant solution volume, biosurfactant concentration, agitation speed, temperature, and time were found to be 12 ml/g of soil, 0.1 % biosurfactant, 200 rpm, 30 °C, and 24 h, respectively. The obtained results were compared to those of SDS and Tween 80 at the optimal conditions described above, and the study reveals an effectiveness of SPB1 biosurfactant comparable to the reported chemical emulsifiers. (1) The obtained findings suggest (a) the competence of Bacillus subtilis biosurfactant in promoting diesel desorption from soil towards chemical surfactants and (b) the applicability of this method in decontaminating crude oil-contaminated soil and, therefore, improving bioavailability of hydrophobic compounds. (2) The obtained findings also suggest the adequacy of Taguchi design in promoting process efficiency. Our findings suggest that preoptimized desorption process using microbial-derived emulsifier can contribute significantly to enhancement of hydrophobic pollutants' bioavailability. This study can be complemented with the investigation of potential role in improving the biodegradation of the diesel adsorbed to the soil.

A new strain isolated from activated sludge and identified as Burkholderia vietnamiensis C09V was used to biodegrade crystal violet (CV) from aqueous solution. To understand the degradation pathways of CV, batch experiments showed that the degradation using B. vietnamiensis C09V significantly depended on conditions such as pH, initial dye concentration and media components, carbon and nitrogen sources. Acceleration in the biodegradation of CV was observed in presence of metal ions such as Cd and Mn. More than 98.86C of CV (30 mg l⁻¹) was degraded within 42 h at pH 5 and 30 °C. The biodegradation kinetics of CV corresponded to the pseudo first-order rate model with a rate constant of 0.046 h⁻¹. UV–visible and Fourier transform infrared spectroscopy (FTIR) were used to identify degradation metabolites. Which further confirmed by LC-MS analysis, indicating that CV was biodegraded to N,N-dimethylaminophenol and Michler’s ketone prior to these intermediates being further degraded. Finally, the ability of B. vietnamiensis C09V to remove CV in wastewater was demonstrated.

In the present study, we aimed to evaluate the effect of UV-visible irradiation on the estrogenicity of an estrone aqueous solution by using chemical analysis associated with an in vitro bioassay and in silico analysis. An estrone aqueous solution was irradiated with an UV-visible high-pressure mercury lamp. By using the MELN in vitro cellular bioassay, based on the induction of a luciferase reporter gene upon the activation of the estrogen receptor by chemicals, we showed that the estrogenic potency of the solution increased after irradiation. High-performance liquid chromatography fractionation of the photolyzed solution followed by in vitro testing of fractions allowed the quantitation of the estrogenic potency of each fraction. Nine photoproducts were detected and characterized by liquid chromatography-mass spectrometry coupling. The observed estrogenic activity is mediated by mono- and multi-hydroxylated photoproducts; it is influenced by the position of hydroxyl groups on the steroidal skeleton. In addition, a structure-activity analysis of the hydroxylated photoproducts confirmed their ability to act as estrogen receptor ligands.