Olive-mill wastewater (OMW) is a by-product effluent of olive oil extraction process that is produced in large amount in the Mediterranean region. OMW is believed to induce phytotoxic effect on organisms including seed germination and plant growth. The objective of this study was to evaluate the impact of untreated and treated OMW with different techniques on seed germination of barley (Hordeum vulgare L.). The following treatments were investigated: (1) tap water (control); (2) OMW treated by aerobic biological technology in a Jacto Reactor (JR); (3) OMW treated by solar fenton oxidation (SFO); (4) OMW treated by microfiltration followed by nanofiltration (MF+NF); (5) OMW treated by microfiltration followed by reverse osmosis (MF+RO) process; (6) diluted OMW with tap water (25 % OMW); (7) diluted OMW with tap water (50 % OMW); (8) diluted OMW with tap water (75 % OMW); and (9) untreated OMW (100 % OMW). A germination test was conducted in an incubator at temperature of 23 ∘C. In each petri dish, a filter paper was mounted and ten seeds of barley were placed on the filter paper. Five milliliter of water were added to each petri dish. The seed germination was determined by counting the number of germinated seeds to calculate the percentage of germination (G %). Germination rate index (GRI), seed vigor index (SVI), and phytotoxicity index (PI) were also calculated. Then, the dry weights and lengths of the shoots and the roots of the germinated seeds were measured. The results show that 100, 75, and 50 %OMW were very phytotoxic and completely prohibited seed germination. However, phytotoxicity decreased significantly following treatments of OMW with all techniques investigated and by the 25 % OMW dilution, as results of removing the phenols and other phytotoxic organic compounds from the OMW or by diluting it. This was evidenced by relative enhancement of the dry weights and lengths of shoot and root as well as the G %, GRI, SVG, and PI. It was concluded that if OMW will be used for irrigating crops, it has to be first treated or diluted with tap water at a ratio of 1:3 OMW:water at least. The most efficient treatment techniques in reducing the phytotoxicity of OMW were the MF+RO, followed by SFO and JR.

Cadmium (Cd) is a highly mobile toxic element in soil-plant systems that interferes with plant growth and nutrient acquisition by modulations in the rhizospheric environment. The current study investigated the influence of maize roots on the medium pH, alterations in nutrient uptake, and impact on the plant’s physiological attributes under Cd stress. Among the nine maize cultivars, subjected to Cd stress (9.15 mg/kg of sand), one was identified as Cd tolerant (3062—Pioneer) and the second as Cd sensitive (31P41—Pioneer). The selected maize cultivars were grown in nutrient solutions supplemented with 0, 10, 20, 30, 40, or 50 μM CdCl₂ under controlled conditions and a starting pH of 6.0. The rhizospheric pH dynamics were monitored each day up to 3 days. Both cultivars caused medium basification; however, the response was different at low (10 and 20 μM) Cd treatments (sensitive cultivar caused medium basification) and at higher (50 μM) Cd treatment (tolerant cultivar caused medium basification). Furthermore, higher Cd was accumulated by the sensitive cultivar which was predominantly found in the roots. Higher Cd levels in the medium resulted in increased uptake and translocation of both Cd and K (in the tolerant cultivar) or only Cd (in the sensitive cultivar). Uptake of other nutrients (Ca, Zn, and Fe) was antagonistically affected by Cd stress in both cultivars. Moreover, Cd stress significantly impaired chlorophyll content, catalase activity, and total protein content; irrespective of the genotype. The malondialdehyde (MDA) content was found to increase, in both cultivars, together with Cd level. However, the extent to which Cd interfered with the studied attributes was more pronounced in the sensitive cultivar as compared to the tolerant one. It is concluded that the maize roots responded to Cd stress by initiating modulations of medium pH which might be dependent on Cd tolerance levels. The study results may help to develop strategies to reduce Cd accumulation in maize and decontamination of metal-polluted soil sediments.

This study is to determine total mercury in edible tissues of eight species of cephalopods and 12 species of crustaceans purchased from 11 identified major fish landing ports and wet markets throughout Peninsular Malaysia. The concentration of mercury was measured by cold vapor atomic absorption spectrometry (AAS) technique using the Perkin Elmer Flow Injection Mercury System (FIMS-400). In general, the mercury levels were low with concentrations in cephalopods ranging from 0.099 to 2.715 mg/kg dry weight (or 0.0184–0.505 mg/kg wet weight) and in crustaceans ranging from 0.057 to 1.359 mg/kg dry weight (or 0.0111–0.265 mg/kg wet weight). The mercury levels showed no significant differences (P > 0.05) between species for both cephalopods and crustaceans. There was no significant correlation between mercury concentrations and the body size of individual for both groups as well. Comparisons with mercury levels obtained found from other previous studies and/or species noted that they were of the same magnitude or relatively low compared to various locations reported worldwide.

The choice of substrates with high adsorption capacity, yet readily available and economical is vital for sustainable pollutants removal in constructed wetlands (CWs). Two identical large-scale demonstration horizontal subsurface flow (HSSF) CWs (surface area, 340 m²; depth, 0.6 m; HLR, 0.2 m/day) with gravel or slag substrates were evaluated for their potential use in remediating polluted urban river water in the prevailing climate of northwest China. Batch experiments to elucidate phosphorus adsorption mechanisms indicated a higher adsorption capacity of slag (3.15 g/kg) than gravel (0.81 g/kg), whereby circa 20 % more total phosphorus (TP) removal was recorded in HSSF-slag than HSSF-gravel. TP removal occurred predominantly via CaO-slag dissolution followed by Ca phosphate precipitation. Moreover, average removals of chemical oxygen demand and biochemical oxygen demand were approximately 10 % higher in HSSF-slag than HSSF-gravel. Nevertheless, TP adsorption by slag seemed to get quickly saturated over the monitoring period, and the removal efficiency of the HSSF-slag approached that of the HSSF-gravel after 1-year continuous operation. In contrast, the two CWs achieved similar nitrogen removal during the 2-year monitoring period. Findings also indicated that gravel provided better support for the development of other wetland components such as biomass, whereby the biomass production and the amount of total nitrogen (TN; 43.1–59.0 g/m²) and TP (4.15–5.75 g/m²) assimilated by local Phragmites australis in HSSF-gravel were higher than that in HSSF-slag (41.2–52.0 g/m² and 3.96–4.07 g/m², respectively). Overall, comparable pollutant removal rates could be achieved in large-scale HSSF CWs with either gravel or slag as substrate and provide a possible solution for polluted urban river remediation in northern China.

Pollution control initiatives in Greater Sudbury, Ontario, Canada, resulted in the decommissioning of the Coniston Smelter in 1972. The last assessment of the effects from the smelter on the surrounding lichen biota was in 1990, which showed an overall improvement in richness following these initiatives, but still few species were present close to the smelter. We examined five sites along this gradient to determine if this pattern is still present on the landscape. Sixty-four macrolichen species in 15 genera were found. Lichen richness and Shannon diversity increased at all sites, but the increase was no longer linear with distance from the smelter. There was no significant difference between lichen richness and diversity at sites at increasing distances from the smelter. We show that past air pollution from the Coniston Smelter is no longer restricting lichen growth and development in the Greater Sudbury area as it was historically. Lichen populations are, therefore, now shaped by other environmental variables.

This paper reports the synthesis, characterization, and application of TiO₂and TiO₂/Ag nanoparticles for use in photocatalysis, employing the herbicide methylviologen (MV) as a substrate for photocatalytic activity testing. At suitable metal to oxide ratios, increases in silver surface coating on TiO₂enhanced the efficiency of heterogeneous photocatalysis by increasing the electron transfer constant. The sol–gel method was used for TiO₂synthesis. P25 TiO₂was the control material. Both oxides were subjected to the same silver incorporation process. The materials were characterized by conventional spectroscopy, SEM micrography, X-ray diffraction, calculation of surface area per mass of catalyst, and thermogravimetry. Also, electron transfers between TiO₂or TiO₂/Ag and MV in the absence and presence of sodium formate were investigated using laser flash photolysis. Oxides synthesized with 2.0 % silver exhibited superior photocatalytic activity for MV degradation.

In the European registration procedure for pesticides, microcosm and mesocosm studies are the highest aquatic experimental tier to assess their environmental effects. Evaluations of microcosm/mesocosm studies rely heavily on no observed effect concentrations (NOECs) calculated for different population-level endpoints. Ideally, a power analysis should be reported for the concentration–response relationships underlying these NOECs, as well as for measurement endpoints for which significant effects cannot be demonstrated. An indication of this statistical power can be provided a posteriori by calculated minimum detectable differences (MDDs). The MDD defines the difference between the means of a treatment and the control that must exist to detect a statistically significant effect. The aim of this paper is to expand on the Aquatic Guidance Document recently published by the European Food Safety Authority (EFSA) and to propose a procedure to report and evaluate NOECs and related MDDs in a harmonised way. In addition, decision schemes are provided on how MDDs can be used to assess the reliability of microcosm/mesocosm studies and for the derivation of effect classes used to derive regulatory acceptable concentrations. Furthermore, examples are presented to show how MDDs can be reduced by optimising experimental design and sampling techniques.

The surfaces of natural sediments are ubiquitously coated by biofilms that increase the content of organic matter in sediments. However, it is less understood whether the biofilms act as a sorbent or a barrier of mass transfer from water column to sediment phase. This study focused on the role of biofilms coverage on sediments in the sorption of bisphenol A (BPA), 17α-ethinyl estradiol (EE2), and 4-nonylphenols (4-NP) as model compounds for endocrine-disrupting chemicals (EDCs). The OC-normalized distribution coefficients (kOC) for BPA, EE2 and 4-NP ranged from 10¹.⁸⁷to 10³.⁰⁹ l/kg, the kOCof EE2 was slightly higher (10².²³ l/kg) for sediment after H₂O₂oxidation than before (10¹.⁹³ l/kg). A two-stage model with a fast section and slow section was employed to describe the sorption process (r² > 0.95). The model results showed that the fast sorption section played a main role in the sorption process, while the slow section determined the extent of the reaction (the second-phase partition coefficient (kₚ₂) ranged from 11.7 to 118.9 l/kg). The ratios of the mass transfer rate constant of the two stages for the natural sediment ranged from 6.0 to 7.2, which were somewhat lower than those for soil samples. These results indicated that the biofilm coverage on sediment may act as a barrier in mass transfer from water to sediment and scarcely increased the sorption capacity of sediments.

The development and application of a polyaniline/carbon nanotube (CNT) cyclodextrin matrix (PANI-β-CD/MWCNT)-based electrochemical sensor for the quantitative determination of the herbicide 4-chloro-2-methylphenoxyacetic acid (MCPA) and its main transformation product 4-chloro-2-methylphenol in natural waters are described. A simple cyclic voltammetry-based electrochemical methodology, in phosphate buffer solution at pH 6.0, was used to develop a method to determine both MCPA and 4-chloro-2-methylphenol, without any previous extraction or derivatization steps. A linear concentration range (10 to 50 μmol L⁻¹) and detection limits of 1.1 and 1.9 μmol L⁻¹, respectively, were achieved using optimized cyclic voltammetric parameters. The proposed method was successfully applied to the determination of MCPA and 4-chloro-2-methylphenol in natural water samples with satisfactory recoveries (94 to 107 %) and in good agreement with the results obtained by an established high-performance liquid chromatography technique, no significant differences being found between the methods. Interferences from ionic species and other herbicides used for broad-leaf weed control were shown to be small. The newly developed methodology was also successfully applied to MCPA photodegradation environmental studies.

Epidemiological studies have widely demonstrated association between ambient ozone and mortality, though controversy remains, and most of them only use a certain metric to assess ozone levels. However, in China, few studies have investigated the acute effects of ambient ozone, and rare studies have compared health effects of multiple daily metrics of ozone. The present analysis aimed to explore variability of estimated health effects by using multiple temporal ozone metrics. Six metrics of ozone, 1-h maximum, maximum 8-h average, 24-h average, daytime average, nighttime average, and commute average, were used in a time-series study to investigate acute mortality associated with ambient ozone pollution in Guangzhou, China, using 3 years of daily data (2006–2008). We used generalized linear models with Poisson regression incorporating natural spline functions to analyze the mortality, ozone, and covariate data. We also examined the association by season. Daily 1- and 8-h maximum, 24-h average, and daytime average concentrations yielded statistically significant associations with mortality. An interquartile range (IQR) of O₃ metric increase of each ozone metric (lag 2) corresponds to 2.92 % (95 % confidence interval (CI) 0.24 to 5.66), 3.60 % (95 % CI, 0.92 to 8.49), 3.03 % (95 % CI, 0.57 to 15.8), and 3.31 % (95 % CI, 0.69 to 10.4) increase in daily non-accidental mortality, respectively. Nighttime and commute metrics were weakly associated with increased mortality rate. The associations between ozone and mortality appeared to be more evident during cool season than in the warm season. Results were robust to adjustment for co-pollutants, weather, and time trend. In conclusion, these results indicated that ozone, as a widespread pollutant, adversely affects mortality in Guangzhou.