Extension of hydrological or water quality records at short-gauged stations using information from another long-gauged station is termed record extension. The ordinary least squares regression (OLS) is a traditional and commonly used record-extension technique. However, OLS is more appropriate for the substitution of scattered missing values than for record-extension as the OLS provides extended records with underestimated variance. Underestimation of the variance of the extended records leads to underestimation of high percentiles and overestimation of low percentiles given that the data is normally distributed. The Maintenance of Variance Extension techniques (MOVE) have the advantage of maintaining the variance in the extended records. However, the OLS and MOVE techniques are sensitive to the presence of outliers. Two new record-extension techniques with the advantage of being robust in the presence of outliers were recently proposed by the authors: the robust line of organic correlation (RLOC) and modified version of the Kendall-Theil Robust line (KTRL2). In this study a new robust technique is proposed. The new regression technique based on L-moments (LMOM) is a modified version of the RLOC and uses the same intercept as that of RLOC and KTRL2 while the estimated slope is based on the second L-moment. An empirical examination of the preservation of the water quality variable characteristics was carried out using water quality records from the Nile Delta water quality monitoring network in Egypt. A comparison between nine record-extension techniques (OLS, MOVE1 to MOVE4, KTRL, KTRL2, RLOC and LMOM) was performed to examine the extended records for bias and standard error in their statistical moment estimates and over the full range of percentiles. Results showed that the proposed LMOM technique outperforms other techniques by producing extended records that preserve variance as well as extreme percentiles.

The bulk deposition of both PAHs and metals is a significant, mounting issue for the urban ecological environment. However, studies generally performed on these pollutants have focused on the regions surrounding a pollution source; thus, it most likely overestimated pollutants in the cities. Therefore, 72 atmospheric bulk deposition samples were collected from six sites located along a transect from the suburbs to the city center in Shanghai over a 1-year period (February 1, 2012 to January 31, 2013). The seasonal variation, spatial distribution, and sources of multiple metals (Al, Ti, V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd, Pb, K, Na, and Mg) and 16 polycyclic aromatic hydrocarbon (PAH) compounds were determined. The results indicated that the annual average rate of dust deposition in Shanghai was 43,100 ± 54,800 mg/m²/year. There were significant or high enrichments of Cu, Zn, Cd, and Pb, and higher depositional fluxes were observed for Zn, Pb, and Cd in the Huangpu district and for Cu in the Minhang district. The deposition fluxes of the PAHs exhibited the following order: urban fringe zone > city center > rural zone (background site). However, unlike in northern Chinese cities, the high-molecular-weight PAHs accounted for most of the PAHs. Furthermore, there were higher depositional fluxes of PAHs in March, July, and October. Overall, the factors influencing urban air quality may include construction, fossil fuel combustion, the abrasion of tires and brake linings (directly related to traffic), the corrosion of galvanized protection barriers, and increasing population density.

Freshwater lakes are an important natural and cultural resource in national parks across the USA. At Cape Cod National Seashore, in southeastern Massachusetts, the water quality of these water bodies (known as kettle ponds), along with local precipitation chemistry, has been measured since the 1980s. These datasets, along with air temperature obtained from a local weather station, were analyzed to assess temporal trends in the air temperature, precipitation acidity, pond temperature, and pond pH, and are interpreted within the context of regional air quality improvements and increasing temperatures from regional climate warming. The results suggest that all parameters have increased significantly during the last several decades. As temperature and pH regulate a wide variety of physical, chemical, and biological processes, these changes may be influencing the overall ecology of the kettle ponds. This analysis provides an opportunity to gauge the future trajectory of this important resource and may ultimately guide management strategies for their continued protection against a backdrop of climate change and atmospheric emission controls.

To date, there is no compiled information for stormwater quality data intended for drinking water supply via managed aquifer recharge (MAR) making risk assessment of these schemes difficult. This study compiles hazards relevant to water recycling via MAR and calculates the associated 95th percentile values. The 95th percentiles of iron, turbidity, colour and faecal indicators exceeded the guideline values at all sites. Likewise, measured hazards for which 95th percentile values met drinking water guidelines (other metals (e.g. zinc), salinity (electrical conductivity) and nutrients including nitrate) did so at all sites. Considering a variety of climatic zones and catchment characteristics and the temporal variations typical in urban stormwater quality, there was a remarkable similarity in the 95th percentile concentrations for a suite of water quality hazards in urban stormwater. This is important in consideration of drinking water risk assessments and determining treatment requirements for potable use.

The present study reports the synthesis and characterization of metallic nanoparticles (NPs) of Pd and bimetallic alloys of PdCu NPs for their application as catalysts to achieve the microbial reduction of p-nitrophenol (PNP). Addition of bimetallic alloys of PdCu NPs to methanogenic sludge incubations increased up to threefold the rate of reduction of PNP. Moreover, their presence promoted a more efficient and selective reduction of PNP to the desired product (p-aminophenol) with negligible accumulation of toxic intermediates (p-nitroso-phenol and p-hydroxylamine-phenol), which prevailed in sludge incubations lacking nanocatalysts. PdCu NPs synthesized by adding precursors H₂PdCl₄ and H₂CuCl₄ independently and simultaneously to the synthesis vessel showed superior catalytic properties as compared to those produced by mixing the same precursors prior addition to the synthesis vessel. The enhanced catalytic properties of bimetallic NPs could be explained by higher physical stability and interfacial arrangement within PdCu alloys promoting a more efficient transfer of reducing equivalents derived from lactate/ethanol fermentation towards the target nitro group in PNP. A wastewater treatment technology, combining the microbial activity of methanogenic consortia and the catalytic activity of bimetallic NPs, is proposed as an alternative for the removal of recalcitrant pollutants from wastewaters.

The recent rapid expansion of nanotechnologies has increased concern over the impact of engineered nanoparticles (ENPs) on the environment and biota. Although the toxicity of ENPs has received considerable attention in the recent years, there are still gaps in our knowledge of the mechanisms responsible for their effects. In this study, we tested the toxicity of various metal oxide ENPs (Al₂O₃, CuO, Fe₃O₄, MnO, TiO₂, and ZnO), including nanowires together with their bulk counter particles and soluble metal salts, on germinating seeds of Sinapis alba L. Fe₃O₄, TiO₂, MnO₂, and Al₂O₃ ENPs did not negatively affected seed germination at any tested concentrations. However, CuO and ZnO ENPs showed a dose-dependent inhibition of germination. Metal ions were more toxic than metal oxide particles at corresponding concentrations. The highest toxicity was exhibited by Cu, followed by Zn, Fe, Al, and Mn ions. A comparison of ENPs with bulk materials did not reveal significantly higher ENP toxicity. Similarly, nanowires showed effects similar to other nanoparticles and bulk materials. Our results indicate that the nanosize or shape of particles did not play a crucial role, whereas metal ions released into cultivation media and accumulated in seedlings contributed significantly to the phytotoxicity of metal oxides.

The economic downturn in Nigeria and Structural Adjustment Programme led to the flooding of Nigerian market with imported used automobiles. Most of these vehicles needed refurbishing and reworking. The present study is a human health risk assessment of metal exposure resulting from reworking of imported used vehicles in Nigeria. Scrap paint dusts from 56 Japanese made cars were collected from 8 different mechanic villages (workshops A–H] in Southeastern Nigeria. Scrap paints were homogenized, mixed, divided into fine particles and digested by standard method. The filtrates were assayed of lead, manganese and copper with atomic absorption spectrophotometry (AAS). Workshop B has the highest concentration of Pb (4.26 ± 0.93). Manganese in workshops A and F were (3.31 ± 0.85) and (3.04 ± 0.47) respectively and were higher than the levels from workshops C, B, D, G and H. Copper in workshop D (7.11 ± 0.21) was significantly greater than the other workshops. The highest hazard quotient (HQ) through ingestion, inhalation and dermal exposures in adults were 9.44E−05 (workshop B), 4.20E−01 (workshop B) and 1.08E−05 (workshop D) respectively. The highest values for HQ through ingestion, inhalation and dermal in children were 8.82E−04, 7.61E−01 and 2.86E−05 all in workshop B respectively. For children, the highest carcinogenic risk levels were 7.05E−08, 6.09E−05 and 2.29E−10 for ingestion, inhalation and dermal exposures respectively. In adults, the carcinogenic risk levels were 7.55E−09, 3.39E−05 and 8.67E−10 for ingestion, inhalation and dermal exposures respectively. Chronic exposure to scrap car paint dusts may be of significant public health importance in Nigeria as this may add to the body burden of some heavy metals.

This work investigates the behavior of atrazine (AT) and its degradation products deethylatrazine (DEA) and deisopropylatrazine (DIA) in oxisol samples. The study was carried out at different depths of maize culture soil under no-till management for up to 180 days. Additionally, controlled laboratory experiments were performed in open flasks in the absence of sunlight or in closed flasks at 4 °C. Higher AT dissipation occurred in the in the field as compared with the samples evaluated under controlled conditions, which indicated that environmental conditions might degrade AT. Interestingly, DEA and DIA levels were low, which suggested that leaching and runoff processes, formation of other degradation products, or even AT mineralization took place. Residual AT, DEA, and DIA were detected in the oxisol samples after 180 days depending on the initial amount of AT in the soil. This study has shown that straw plays a relevant role in AT retention and significantly contributes to DEA and DIA formation. At 180 days, straw samples contained AT concentrations near 100 μg kg⁻¹ and concentrations of the more leachable DEA and DIA close to 50 μg kg⁻¹ even under the influence of sunlight and rainfall. A preliminary analysis of natural water samples near the investigated region showed that DEA and DIA were absent and that AT concentrations were high, which pointed to the need for more detailed evaluation.

This study characterizes a biotensoactive produced by the bacterium Azospirillum lipoferum, which was isolated from the rhizospheres of contaminated plants with oil in the lower basin of the Tonala River, Villa Benito Juarez, municipality of Cardenas, Tabasco, Mexico. The following properties were analyzed: viscosity at 25 °C, elemental analysis (% mol) by scanning electron microscopy, density at different temperatures, molecular weight, acute toxicity, median lethal concentration (LC₅₀), and saponification and acidity indices. The effects of pH (6.0, 7.0, 8.0, and 9.0) and temperature (25, 30, 35, and 40 °C) on the production of the biotensoactive and the effect of NaCl on the surface tension, density, and emulsifying capacity were studied. The results showed that the viscosity remained stable between 1.0914 and 1.1276 mPa-s, so the biotensoactive was classified as low-molecular weight. Toxic effects on the population of Eisenia foetida began at surfactant concentrations above 55,000 ppm, and the LC₅₀ was 96,695 ppm. The highest yield of biotensoactive production was obtained 48 h after the beginning of the treatment at pH 8 and pH 9 and 25 °C. At 25 °C, the surface tension ranged from 44.60 mN/m at a 1 % concentration by weight of NaCl to 51.11 mN/m at 15 % NaCl, while at 60 °C, the surface tension ranged from 34.90 mN/m at 1 % NaCl to 40.22 mN/m at 15 % NaCl. The emulsifying capacity was 70 % (aqueous solution 15 % NaCl).

The spread of antimicrobial resistance (AMR) is a global concern, high research priority being given to the environmental contamination, as the prevalence of organisms exhibiting AMR continues to increase. Multiresistant bacteria carrying different mobile genetic elements have been detected in sites with different degrees of urbanization, surface waters receiving insufficiently treated effluents being at high risk. The aim of the present study was to investigate the loads, antibiotic susceptibility, and class 1 integron carriage of Enterobacteriaceae isolated from surface waters and wastewaters around a large Romanian city. Searching for a valuable genetic marker of the displayed antibiotic resistance, the link between the AMR and the presence of int1I gene was explored in a total of 166 waterborne strains. Overall, amoxicillin-clavulanate resistance displayed the highest frequency (71.1 %), followed by ampicillin (63.9 %), cefuroxime (21.1 %), ciprofloxacin (17.5 %), cefotaxime (15.7 %), ceftriaxone (10.8 %), and gentamicin (6.6 %). The frequencies of isolates resistant to ampicillin, amoxicillin-clavulanate, ciprofloxacin, and gentamicin and also the prevalence of multiresistant strains were greater in surface waters, compared to wastewaters. The Int1I gene was detected in 21.7 % waterborne Enterobacteriaceae. A decrease in coliform counts and intI1-bearing cells, but a general increase in AMR and multiresistant bacteria, occurred during the wastewater treatment. A weak positive correlation was found between multidrug resistance int1I carriage in wastewater effluent but no sufficient evidence of a linkage between phenotypic AMR and int1I, overall. The presence of class 1 integron can be associated with anthropogenic influence, but the simple detection of intI1 gene cannot explain the complex antibiotic resistance phenotype.