To evaluate the trace metals contamination status in the Gulf of Tunis, forty one sediment samples were analyzed using different approaches. According to certain contamination and ecological risk indices (Contamination Factor, Geoaccumulation index and Ecological risk index), Hg has the highest contamination level while pollution by Ni, Pb, Cd and Cr was absent. The highest concentrations of trace metals were found in sediments collected from the offshore and coastal areas located opposite the main exchange points with the gulf particularly, the Mejerda and Meliane Rivers, the Khalij Channel, Ghar El Melh and El Malah lagoons, Tunis Lake and Sebkhat Ariana. However, further ecological indices (Potential ecological risk index, Toxic unit and Mean effect-range median quotient) and comparison with sediment quality guidelines suggest that in addition to Mercury, Cr, Pb and Ni concentrations are detrimental to biota in both the offshore and areas near to the exchange points with the gulf. Moreover, in these areas the results from sequential extraction and individual contamination factor calculation pointed to the mobility and bioavailability of Cr, Pb and Ni.

Microplastic pollution is a growing, yet poorly understood problem. Here, we assessed the relationship between microplastic concentration and distance to rivers, shorelines, cities, sediment grain size or water depth in sediments of the world's largest (semi-)enclosed aquatic basins. Microplastic was extracted from sediment using density separation, elutriation and hydrophobic adhesion. Fibers and transparent or white microplastic particles were the most abundant shape and color. The microplastic concentration in sediments of the Black Sea was about twice as high compared to that in the Caspian Sea. Fragment concentrations decreased with depth, while fiber concentrations were independent of depth. Overall, no relationship with distance to shores, rivers and cities or with grain size was observed. However, within some depth classes concentrations were related to the distance from rivers, shores and cities.

Mercury (Hg) concentrations based on dietary sources have shown to predict differences in fish; however, they are usually applied at an individual scale and are rarely directed at a known trophic transfer. We combined gut content analysis and stable isotope analysis (δ¹⁵N and δ¹³C) to provide a quantitative estimate of Hg and selenium (Se) biomagnification in the striped marlin (Kajikia audax) and blue marlin (Makaira nigricans) food web from the southwestern Gulf of California. Hg and Se concentrations (mean ± SD; μg g⁻¹, dw) were different among K. audax (Hg = 3.6 ± 2.1, Se = 5.5 ± 5.4) and M. nigricans (Hg = 19.0 ± 29.6, Se = 8.8 ± 10.5). Such variations of element concentrations could be linked to predation with different Hg and Se contents. Diet data presented as prey weight (%W) indicated a higher proportion of large prey fish for the blue marlin than the striped marlin. δ¹⁵N and δ¹³C indicated pelagic food sources with epipelagic preferences for the blue marlin and mesopelagic for the striped marlin. The relationship between Hg concentrations and δ¹⁵N was positive along the food web of both marlin species, indicating biomagnification of Hg. However, Se biomagnification was not clearly evidenced, and Se:Hg ratios decreased with δ¹⁵N, attributed to increasing Hg concentrations with increased trophic level.

Microplastic pollution in marine environments has become a major global environmental issue. However, the source of microplastics in marine environments is poorly understood. Here, we investigated the distribution and the source of microplastics in surface seawater from Sanggou Bay, China. The results showed that the average abundance of microplastics was 20.06 ± 4.73 items/L, which represented a medium and high level relative to other sea areas. Microplastics of <0.5 mm dominated. Most particles were granular and transparent, and polyethylene was the dominant polymer. We estimated that 62.76% of the microplastics originated from mariculture facilities, an indication that mariculture contributes significantly to microplastics pollution, and calculated that 96.15 kg was present in surface seawater of Sanggou Bay. Our findings indicated that more attention should be paid to mariculture-derived microplastics pollution in the future.

Knowledge of contaminant distribution is important, particularly in the vulnerable first results about the occurrence of seventeen polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans and twelve dioxin-like polychlorinated biphenyls in arctic fjord seawater are reported. The contaminants were measured in 10 samples of suspended particulate matter collected in Hornsund (Svalbard). The ∑PCDD/F and ∑dl-PCB concentrations ranged from 0.066 to 231.47 pg/L and from 2.43 to 46.43 pg/L respectively. In terms of total PCDD/Fs, in general highly chlorinated PCDFs constituted the most significant fraction. Among dl-PCB compounds, PCB118 was the dominant congener. The toxicity equivalent for the samples ranged from 0.0008 to 1.90 pg I-TEQ/L for ∑PCDD/Fs, while for ∑dl-PCB it ranged from 0.0002 to 0.024 pg WHO₀₅-TEQ/L. High concentrations of dioxins and dl-PCBs in some samples indicated that those contaminants could pose a threat to marine biota.

Agriculture is a major contributor to marine nitrogen pollution, and treatment wetlands can be a strategy to reduce it. However, few studies have assessed the potential of treatment wetlands to mitigate nitrogen pollution in tropical regions. We quantify the nitrogen removal rates of four recently constructed treatment wetlands in tropical Australia. We measured denitrification potential (Dₜ), the inflow-outflow of nutrients, and tested whether the environment in these tropical catchments is favourable for nitrogen removal. Dₜ was detected in three of the four systems with rates between 2.0 and 12.0 mg m⁻² h⁻¹; the highest rates were measured in anoxic soils (ORP −100 to 300 mV) that were rich in carbon and nitrogen (>2% and >0.2%, respectively). The highest nitrogen removal rates were measured when NO₃⁻-N concentrations were >0.4 mg L⁻¹ and when water flows were slow. Treatment wetlands in tropical regions can deliver high removal rates of nitrogen and other pollutants when adequately managed. This strategy can reduce nutrient loads and their impacts on sensitive coastal zones such as the Great Barrier Reef.

Due to the ecotoxicological effects, microplastics are considered a threat for the marine environment. Recent reports indicate their presence not only in subsurface water and in coastal beach sediments, but also in the deep-sea. Notwithstanding, there is still not a scientific consensus about the analytical procedure to be applied for their determination. In this work we compared the performance of two extraction methods: pressurized solvent extraction (PSE) and density separation. Sea sand and seafloor sediments were spiked with known amounts of polystyrene (PS), polyethylene (PE) and polypropylene (PP) microplastics and submitted to both the extraction procedures. Results showed that the PSE ensured higher recoveries for the smaller size particle fractions (89,2 ± 1.1% in the 50–150 μm range) whereas the density separation enabled precise recoveries for the larger size particles (SD = 1,5%). No significant differences in terms of blanks control were highlighted.

Monitoring microplastics in the environment based on the Nile red staining protocol has proven to be a newly emerged method in several instances. However, the methodology is still having the limitations of susceptibility, indiscrimination, and complexity, etc. The objectives of this paper are to explore the effects of wavelength, temperature, H₂O₂ and NaCl addition, plastic property, and fluorescent index on the Nile red staining in microplastics analysis and propose solutions to these inadequacies. Sample co-stained with H₂O₂ (ωfᵢₙₐₗ = 10%) and NaCl (ωfᵢₙₐₗ = 8.8%) will lower the fluorescence intensity of biogenic materials and reduce their interferences. Based on the fluorescence color and intensity of fused fluorographs, the combined fluorescent index for twelve microplastics was significantly different, thus could be preliminarily distinguished. An elevated staining temperature is propitious to fluorescent tagging with Nile Red. Finally, an improved protocol was proposed, which made the methodology streamlined in microplastics analysis.

Within two coastal shallow lagoons, trophic state was assessed by integrating water and sediment chemical indicators such as the TRIX and the benthic biopolymeric carbon (BPC) trophic indicator, altogether with biological environmental indicators (diatom species characterization). Spatial and temporal behavior of TRIX and BPC indices suggest that water column trophic indicators reflect rather short-term variations in water quality changes, while benthic trophic indicators rather reflect consistent long-term trends which make them useful as enduring indicators of eutrophication. Canonical Correspondence Analysis (CCA) showed that both sediment and transitional water trophic state indices increased eutrophic conditions with a decreasing salinity and increasing total nutrients. Diatom species associated with elevated eutrophic condition such as Staurosirella martyi, Staurosira breviestriata, Amphora copulata, Amphora veneta, Nitzschia sp., and Bacillaria paradoxa, showed a positive correlation with both trophic indices. We highlight the need for considering sediment eutrophication indicators towards in monitoring programmes within shallow coastal lagoons.

Documenting the prevalence of microplastics in marine-coastal ecosystems serves as a first step towards understanding their impacts and risks presented to higher trophic levels. Estuaries exist at the interface between freshwater and marine systems, and provide habitats for a diverse suite of species, including shellfish, fish, and birds. We provide baseline values for estuarine mudflats using sediment samples collected at Cowichan-Koksilah Estuary in British Columbia, Canada, a biologically-rich estuary. The estuary also contains a marine shipping terminal, forestry log sort area, and input of contaminants from nearby residential and agricultural areas. Microplastics, both fragments and fibers, occurred in 93% (13/14) of sediment samples. A mean of 6.8 microfibers/kg dw (range: 0–12 microfibers/kg dw) and 7.9 microfragments/kg (range: 0–19 fragments/kg dw) occurred in individual samples, and counts of fibers and fragments were strongly correlated (r = 0.78, p = 0.008, n = 14). The abundance of microplastics tended to be higher on the north side of the estuary that receives greater inputs from upland sources relative to the south side. Size distributions of microplastic fragments and fibers were similar to sediment grain size distribution with size categories 0.063 to 0.25 mm and 0.25 to 0.6 mm being the most common for plastics and sediment, indicating the occurrence of microplastics likely followed existing depositional processes within the estuary. Microplastics in sediments were composed of a variety of polymers, including high density polyethylene (HDPE), Nylon 6/6 (polyhexamethylene adipamide), and polyethylene terephthalate-PETE (poly(1,4-cyclohexylene dimethylene terephthalate)). This study indicates that microplastics occur throughout most of the Cowichan-Koksilah Estuary, and future studies should focus on the exposure risk and potential for bioaccumulation for wildlife species that feed on the surface of intertidal mudflats.